OEM Barometer Board | Barometric Pressure Sensor Module | Altitude Sensing Board | Flight Sensor Electronics | The Board Your Aircraft Trusts to Know Its Altitude

🇺🇸 U.S.A. FIRST

Ares Acres proudly supports American agricultural drone operators with genuine DJI Agras OEM replacement parts, professional repair equipment, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

Every spraying mission depends on the aircraft knowing exactly where it is — and altitude is half of that equation. The barometer board feeds the flight system the barometric pressure data it uses to hold altitude, fly terrain, and spray at consistent height, pass after pass, tank after tank.

And when it fails, it fails loud: altitude drift, erratic height readings, error codes on the screen — and a six-figure aircraft parked in the truck while the weather window closes. A sensor smaller than a thumb drive, standing between you and a full day of billable acres.

That is exactly why Ares Acres stocks genuine OEM sensor electronics for American operators. Order it today, swap it in, run your calibration, and get back over the field — no guesswork, no aftermarket gamble, no lost week.

For professional farmers, aerial applicators, and commercial drone operators, the spare barometer board on the shelf is the cheapest flight insurance you will ever buy.

✅ DJI Agras T50 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

📦 Package Includes

• 1 × DJI Agras T50 OEM Barometer Board
• Genuine OEM barometric pressure sensor board
• Factory-grade sensor electronics module
• Direct-fit OEM replacement component
• OEM protective packaging

🔧 Component Overview

The DJI Agras T50 OEM Barometer Board is the genuine OEM barometric pressure sensor board for the DJI Agras T50 and DJI Agras T25 agricultural drones.

This is the exact class of board your aircraft left the factory with — not an aftermarket approximation. The sensing elements, board layout, connector, and mounting points match what the flight system was engineered and calibrated around, which is why an OEM swap gets you flying again instead of chasing new problems.

The board's job is simple and absolutely critical: read barometric pressure and hand the flight system the clean altitude data that stable flight, terrain following, and consistent spray height are built on.

Commercial agricultural drones lean on accurate altitude sensing every single day, including:

• Crop spraying at consistent height
• Liquid fertilizer application
• Herbicide treatments
• Fungicide applications
• Insecticide spraying
• Terrain-following operations
• Orchard operations
• Vineyard spraying
• Precision agriculture missions
• Daily commercial deployments
• Fleet operations
• High-acreage contract work

Throughout those hours, sensor electronics absorb everything the season throws at them:

• Continuous airframe vibration
• Heat cycling in summer conditions
• Humidity and condensation
• Chemical vapor and mist exposure
• Dust and fine particulates
• Pressure-washing moisture
• Thousands of power cycles
• Hard landing shock loads
• Transport vibration
• Long commercial operating hours

Sooner or later, that exposure catches up with any sensor board — and the day it does, this is the part that puts the aircraft back to work.

The OEM Barometer Board delivers:

• Accurate barometric pressure sensing
• Rock-steady altitude estimation
• Consistent spraying height
• Clean, reliable flight system data
• Factory calibration standards
• Error-free preflight checks
• Fast diagnostic turnarounds
• Fleet-grade reliability
• Maximum aircraft uptime
• Season-long confidence

For operators whose aircraft earn money every day it flies, this board pays for itself the first morning it saves.

⚙️ Functional Purpose

The OEM Barometer Board provides the barometric pressure data the DJI Agras T50 and T25 flight system depends on for altitude.

This board:

• Senses barometric air pressure with factory accuracy
• Powers stable altitude estimation
• Locks in consistent altitude hold
• Keeps spraying height uniform across every pass
• Feeds clean data to the flight system
• Replaces failed or drifting sensor boards
• Clears barometer-related error codes
• Restores factory sensing performance
• Drops straight into the OEM connector and mounting
• Supports accurate terrain operations
• Turns a grounded aircraft into a working one
• Ends diagnostic guesswork
• Kills preventable downtime
• Keeps the fleet mission-ready
• Belongs in every serious spares kit

Stable spraying starts with the aircraft knowing its altitude — and that knowledge starts right here.

A fresh OEM barometer board keeps the flight system fed with the exact pressure data it was calibrated around, mission after mission, season after season.

A failing barometer board costs you:

• Altitude hold you can't trust
• Erratic height readings
• Uneven spray application
• Error messages and failed preflights
• Reduced flight stability
• A grounded aircraft
• Interrupted missions
• Burned weather windows
• Lost spraying days mid-season
• Revenue that doesn't come back

One board. One swap. Problem gone.

⚠️ Common Replacement Indicators

Time to order when you see:

• Barometer error messages or warnings
• Failed sensor checks at startup
• Unstable or drifting altitude hold
• Erratic or jumping altitude readings
• Inconsistent spraying height between passes
• Altitude behavior that worsens as the day heats up
• Errors after wash-down or a wet morning
• Errors following a hard landing
• Visible board damage or corrosion
• Damaged connector or wiring
• Diagnostic findings during service
• Avionics rebuild projects
• Post-incident repairs
• Building out fleet spares before the season

What kills barometer boards: vibration cycling that never stops, brutal summer heat cycles, moisture and condensation, chemical vapor, hard-landing shock, connector wear from repeated service, and plain electronic aging across thousands of hours. Every commercial airframe gets there eventually — the only question is whether the replacement is on your shelf when it does.

Installation is a clean OEM swap: seat the connector, run the aircraft's built-in diagnostic and calibration routine, and fly. Smart operators order two — one for the aircraft, one for the truck.

📐 Specifications

Component Type: Barometer board / barometric pressure sensor module

Compatibility:

• DJI Agras T50
• DJI Agras T25

Package Quantity: 1 Piece

Installation Area: Aircraft sensor electronics

Function: Provides barometric pressure data for altitude estimation and flight stability

Construction: Genuine OEM sensor circuit board

Mounting Type: Direct-fit OEM replacement component

Application: Agricultural drone avionics maintenance

🚜 Necessary For

This component is built for:

• DJI Agras T50 operators
• DJI Agras T25 operators
• Farmers operating spray drones
• Commercial spraying contractors
• Agricultural aviation companies
• Fleet maintenance managers
• Agricultural drone technicians
• DJI Agras service providers
• Drone repair facilities
• Commercial drone fleets
• Precision agriculture businesses
• Avionics repair projects
• Preventative maintenance programs
• Post-incident repair work
• Emergency repair inventory
• Professional agricultural drone operators

Especially valuable during:

• Spring spraying season
• Summer application windows
• Sensor troubleshooting and diagnostics
• Avionics rebuild projects
• Multi-aircraft fleet maintenance
• Seasonal rebuilds
• Emergency repairs
• High-hour commercial operations

When the aircraft is booked and the crop is ready, the operator with the spare sensor board is the one who sprays.

💡 Why This Part Matters

Every DJI Agras flight begins and ends with sensor data — and the barometer board is in the small circle of components the aircraft trusts to know its own altitude.

It's one of the smallest parts on the aircraft, and everything above it rides on the data it produces. Altitude hold, spray height consistency, terrain work, flight stability — all of it traces back to clean pressure sensing. When that data goes bad, the aircraft doesn't limp along. It grounds itself. Mid-season. Mid-contract.

That's why this board belongs on the shelf before the error code ever appears. Sensor failures don't schedule appointments — they show up on the busiest morning of the year.

The OEM Barometer Board delivers:

• Altitude sensing you can trust
• Stable, predictable flight
• Uniform application height
• Clean preflight checks
• Factory sensor performance
• Same-day diagnostic repairs
• Fleet-grade standards
• Maximum aircraft uptime
• Reliable commercial performance
• Season-long operational confidence

Flying without a spare, operators risk:

• A grounded aircraft
• Unstable altitude behavior
• Uneven spray application
• Failed preflight checks
• Days lost waiting on parts
• Blown weather windows
• Missed contract deadlines
• Lost spraying revenue
• Reduced return on investment

For practical, hardworking operators, the value is simple:

Protect the sensing. Protect the flight. Protect the mission. Protect the season.

The best operators don't wait for the error code. Genuine OEM sensor boards on the shelf turn a grounded week into a same-day swap — order yours before the season decides for you.

🔍 SEO Keywords

DJI Agras T50

DJI Agras T50 OEM

DJI Agras T50 Parts

DJI T50 Parts

DJI Agras T25

DJI Agras T25 Parts

DJI T25 Parts

DJI Agras OEM

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras T50 Barometer Board

DJI Agras T50 OEM Barometer Board

DJI T50 Barometer Board

DJI T25 Barometer Board

DJI Agras Barometer Board

DJI Agras Barometer Module

DJI Agras Barometric Pressure Sensor

DJI Agras Altitude Sensor

DJI Agras Sensor Board

DJI Agras Sensor Module

DJI Agras Flight Sensor Parts

DJI Agras Avionics Parts

DJI Agras Electronics Parts

DJI Agras Circuit Board Parts

DJI Agras OEM Replacement Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Sensor Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

DJI Agras T50 OEM Parts

DJI Agras T50 Repair Parts

DJI Agras T25 Repair Parts

DJI Agras Fleet Maintenance Parts

🇺🇸 U.S. GEO Keywords

DJI Agras Parts USA

DJI Agras T50 Parts USA

DJI Agras T50 OEM Parts USA

DJI T50 Parts USA

DJI Agras T25 Parts USA

DJI T25 Parts USA

DJI Agras OEM Parts USA

DJI Agras Barometer Board USA

DJI Agras Sensor Parts USA

DJI Agras Avionics Parts USA

DJI Agras Electronics Parts USA

DJI Agras Replacement Parts USA

DJI Agras Repair Parts USA

DJI Agras Maintenance Parts USA

DJI Agricultural Drone Parts USA

DJI Spray Drone Parts USA

DJI Crop Sprayer Parts USA

DJI Agras T50 Repair Parts USA

DJI Agras Fleet Parts USA