DJI Agras T50 – T40 Original Landing Gear Full Set — OEM structural support assembly, complete landing system, and aircraft stability & ground protection package for the DJI Agras T50 and T40.

🇺🇸 U.S.A. FIRST

A landing gear rebuild done one bracket at a time turns into three orders and two weeks of an aircraft sitting in the shop — in the middle of the season, that is the most expensive way to fix anything. This full set puts every tube, crossbeam, fixing piece, pad, clip, and fastener in one box so an American operator can strip the old gear, build it back to factory spec in an afternoon, and be spraying the next morning.

✅ Compatibility Guarantee

• Guaranteed compatible with DJI Agras T50 / T40
• Same Day Shipping
• FREE & FAST U.S. Shipping

📦 Package Includes

• YC.JG.BJ001821 – Landing Gear Aluminum Tube
• YC.WJ.L00873 – Screw M30-HC1880-55-85
• YC.JG.ZS003558 – Landing Gear Bottom Rubber Pad
• YC.WJ.L00877 – M3 Nut
• YC.WJ.L00871 – Screw M30-HC100100-55-85
• YC.JG.ZS003468 – Landing Gear Y-Tee Part
• YC.WJ.L00426 – T30-HC0100100-057030-0323-N Screw
• YC.ST.L00017 – Screw M30-HC02800070-055030-0003-Y
• YC.JG.ZS003725 – Landing Gear Cable Clip
• YC.JG.XW000110 – Landing Gear Crossbeam (Rear)
• YC.JG.ZS003467 – Landing Gear Fixing Piece (Rear Right)
• YC.ST.LL000339 – Screw M40-HC0350210-070040-5103-N
• YC.WJ.L00961 – M4 Stainless Locknut
• YC.ST.L000330 – Screw M40-HC01510056-070039-5103-Y
• YC.JG.ZS003466 – Landing Gear Fixing Piece (Rear Left)
• YC.JG.ZS003465 – Landing Gear Fixing Piece (Front Left)
• YC.JG.ZS003464 – Landing Gear Fixing Piece (Front Right)
• YC.JG.XW000111 – Landing Gear Crossbeam (Front)
• OEM protective packaging

🔧 Component Overview

The DJI Agras T50 – T40 Original Landing Gear Full Set is a complete OEM structural landing assembly designed to provide aircraft stability, impact absorption, and ground support during takeoff, landing, transport, and field operations.

This full landing gear system includes the primary structural components, reinforcement brackets, crossbeams, mounting hardware, cable management pieces, and shock-contact elements required to restore or maintain factory landing gear integrity.

Built to DJI factory specifications, the landing gear assembly is engineered to withstand the demanding conditions of agricultural spraying operations, including uneven terrain, repeated deployment cycles, transport stress, and high-load field usage.

A damaged or weakened landing gear system can compromise aircraft balance, structural stability, and safe operation—potentially leading to frame damage, unstable landings, or operational downtime.

This is a structure-critical OEM assembly essential for maintaining safe and reliable aircraft performance.

What this assembly lives through:

• Full-tank landing impacts across an entire spraying season
• Uneven ground — stubble, gravel, headlands, ditch banks, and trailer decks
• Loading, unloading, and tie-down stress between every job site
• Chemical residue, fertilizer dust, and daily washdown
• UV exposure, heat cycling, and freeze-thaw over a full working year
• Continuous vibration transmitted down from the airframe in flight

⚙️ Functional Purpose

The landing gear full set is designed to:

• Support safe takeoff and landing operations
• Maintain aircraft balance and structural stability
• Distribute landing impact forces across the airframe
• Reinforce lower aircraft structural integrity
• Protect the aircraft during transport and staging
• Secure cable routing and structural alignment
• Restore factory landing gear performance after damage or wear

⚠️ Common Replacement Indicators

• Cracked or bent landing gear structure
• Unstable or uneven aircraft stance
• Hard landing damage
• Broken crossbeams or fixing brackets
• Worn rubber landing pads
• Loose or damaged mounting hardware
• Structural fatigue after extended field operations
• Damage caused by transport or impact incidents

Diagnostic note: once more than one or two pieces are damaged, replace the set rather than the piece. A gear system that has taken a hard landing spreads the damage — a bent tube pre-stresses the fixing pieces, a cracked Y-Tee lets the crossbeams work loose, and fasteners that have been shock-loaded do not hold torque the way they did new. Rebuilding around old hardware is how the same repair comes back three weeks later.

What kills a landing gear system:

• Repeated heavy landings at full tank weight
• Over-torqued or reused fasteners crushing composite mount points
• Impact and shifting loads during transport
• Vibration fatigue accumulating across hundreds of flight hours
• Chemical and UV exposure embrittling pads and composite parts
• Flying on after an incident without a full structural inspection

📐 Specifications

• Component Type: Complete landing gear structural assembly
• Material: DJI-spec reinforced composite, aluminum, and stainless hardware
• Compatibility: DJI Agras T50 / T40
• Installation Area: Lower aircraft landing structure
• Function: Aircraft support, impact absorption, structural stabilization, and ground protection

🚜 Necessary For

This component is essential inventory for:

• DJI Agras T50 and T40 repair technicians
• Farms operating high-cycle agricultural aircraft
• Drone maintenance and rebuild teams
• Contractors managing fleet reliability
• Operators repairing landing or transport-related damage

💡 Why This Part Matters

The landing gear system experiences continuous stress from:

• Landings on uneven terrain
• Heavy operational cycles
• Transportation between job sites
• Repeated deployment during spraying season

A compromised landing gear assembly can result in:

• Reduced aircraft stability
• Structural misalignment
• Increased stress on the airframe
• Unsafe landing conditions
• Higher long-term repair costs

Replacing the landing gear full set:

• Restores OEM structural integrity
• Improves landing stability and safety
• Protects the aircraft frame from excessive stress
• Supports reliable daily agricultural operations
• Reduces operational downtime during critical spraying periods

Professional operators proactively maintain landing systems to protect high-value DJI Agras aircraft and ensure long-term fleet reliability.

After installation:

• Lay out and identify every piece against the parts list before starting the build
• Assemble loose first, square the geometry, then torque evenly to spec
• Set the aircraft on flat ground and confirm it sits level with no rock
• Route and clip all cabling so nothing is pinched or under tension
• Re-check fastener torque after the first few flights, then each season

Rebuild it right. Square the stance. Land it level. Fly the season.

🔍 SEO Keywords

DJI Agras T50 landing gear full set

DJI T40 landing gear assembly

DJI Agras T50 structural parts

DJI T40 OEM landing gear

DJI agricultural drone landing gear repair

DJI T50 landing gear replacement

DJI Agras frame support components

DJI drone landing assembly

DJI Agras T50 OEM Parts

DJI Agras OEM Parts

DJI Agras Parts

📍 U.S. GEO Keywords

DJI Agras parts USA

DJI Agras T50 landing gear United States

DJI Agras dealer Midwest

Agricultural drone landing gear Iowa

DJI T40 landing gear parts Texas

DJI Agras repair parts Nebraska

Agras landing gear full set Kansas

DJI Agras parts Illinois

DJI Agras parts Canada Australia