{"product_id":"dji-agras-t16-oem-spray-nozzle-holder","title":"DJI Agras T16 OEM Spray Nozzle Holder","description":"\u003cp\u003eThe DJI Agras T16 OEM Spray Nozzle Holder is a single black moulded holder from the spray system of the DJI Agras T16. It is Y-shaped: a straight vertical stem with a squared foot at its lower end, and two arms that branch out from the top of the stem at an angle, each ending in a clamp end. As its name says, it is the holder that carries the spray nozzles at their position on the aircraft; it is not a nozzle, not a nozzle clip and not a spray bar. It is identified for the DJI Agras T16. Operators usually reach it while searching for a T16 nozzle holder, a T16 nozzle bracket, a T16 Y nozzle mount, a broken T16 nozzle arm, or the reason one T16 nozzle sprays a stripe off to one side. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T16 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T16, spray nozzle holder position\u003c\/li\u003e\n\u003cli\u003eMatched by Y profile, arm angle, clamp ends and stem foot against the holder you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spray system part, brand new, supplied as a single holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one holder. If you want the match confirmed, photograph the holder you removed face on, so the Y and both clamp ends are visible, and from the side, and send it to us — we will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Spray Nozzle Holder — black Y-shaped moulding with a vertical stem, a squared foot and two angled arms ending in clamp ends, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the holder, not the nozzles.\u003c\/strong\u003e No nozzles, tips or clips are included.\u003c\/p\u003e\n\u003cp\u003eNot included: nozzles and nozzle tips, nozzle filters, nozzle clips, check valves, seals and O-rings, hoses and hose clamps, the spray bar or arm the holder mounts to, and any screws or fasteners. Move sound parts across from the old holder, or replace damaged ones separately.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the holder on the aircraft. If a clip, seal or screw broke when the old holder came off, tell us which one and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe spray nozzle holder is the part that puts the T16's nozzles where they need to be. The nozzles do the spraying, but it is the holder that decides where they sit and which way they point, and on a spray aircraft where the nozzle points is where the product lands.\u003c\/p\u003e\n\u003cp\u003eIts shape, as shown in the product images, has four working areas:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe stem\u003c\/strong\u003e — a straight vertical moulding that carries the holder from its mounting point down to the nozzle position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe foot\u003c\/strong\u003e — a squared, wider section at the lower end of the stem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe arms\u003c\/strong\u003e — two arms that branch out from the top of the stem at an angle, symmetrically to each side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe clamp ends\u003c\/strong\u003e — a clamp end at the tip of each arm, with small tabs standing up from it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Y is the point of the part. Two arms at a fixed angle place two clamp ends at a fixed spacing and a fixed direction from the stem. That geometry is what the holder supplies, and it is all moulded in; nothing on the holder adjusts it.\u003c\/p\u003e\n\u003cp\u003eOver a working season a nozzle holder sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray mix and chemical residue at every nozzle it carries\u003c\/li\u003e\n\u003cli\u003eRinse water at the end of every day\u003c\/li\u003e\n\u003cli\u003eVibration from the airframe and pressure pulses from the spray system\u003c\/li\u003e\n\u003cli\u003eKnocks from crop, stubble, posts and the ground at the low points of the aircraft\u003c\/li\u003e\n\u003cli\u003eHandling every time a nozzle is removed for cleaning\u003c\/li\u003e\n\u003cli\u003eSun and heat on the trailer between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHolders are replaced for three reasons: an arm or clamp end cracks or breaks off, the stem or foot cracks at its mount, or an arm is bent or twisted out of its moulded angle after a knock. The last of those is the one that is easy to miss, because a bent holder still holds its nozzles. That is the point this part turns on.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe spray nozzle holder's engineering role is geometry. It holds each nozzle at a set distance from the stem and at a set angle, so the nozzles spray where the aircraft's spray pattern expects them to.\u003c\/p\u003e\n\u003cp\u003eAt its position on the spray system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarries the nozzles at the clamp ends of its two arms\u003c\/li\u003e\n\u003cli\u003eFixes the spacing between the two clamp ends\u003c\/li\u003e\n\u003cli\u003eFixes the direction each clamp end faces\u003c\/li\u003e\n\u003cli\u003eHolds that geometry against vibration and spray pressure\u003c\/li\u003e\n\u003cli\u003eLets the nozzles be removed and refitted for cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not set the flow rate; the pump and nozzle tips do that\u003c\/li\u003e\n\u003cli\u003eIt does not atomise or shape the spray; the nozzle does that\u003c\/li\u003e\n\u003cli\u003eIt does not filter the liquid; the nozzle filter does that\u003c\/li\u003e\n\u003cli\u003eIt does not stop drips after shut-off; the check valve does that\u003c\/li\u003e\n\u003cli\u003eIt is not the nozzle clip that retains a nozzle; that is the Nozzle Clip, a separate part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the angle of each arm is moulded in, the holder is either at its shape or it is not. A holder knocked out of shape does not lose its grip on the nozzles. It keeps holding them firmly — in the wrong place, pointing the wrong way.\u003c\/p\u003e\n\u003cp\u003eThat is the honest case for this part. A holder that is cracked, broken or bent moves the spray. A holder at its correct shape with a nozzle that sprays badly is a nozzle, filter, valve or seal problem, and a new holder will not change it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a bent holder still grips its nozzles — so check where they point, not whether they are held\u003c\/h2\u003e\n\u003cp\u003eWhen one T16 nozzle position starts laying down a stripe, a gap or a double strip, the first checks are usually the nozzle, its filter and its clip. That is right as far as it goes. But all three can be perfect and the spray still wrong, because the nozzle is held firmly in a holder that is no longer at its moulded shape.\u003c\/p\u003e\n\u003cp\u003eSo the diagnosis turns on one question: is the nozzle spraying badly, or spraying well in the wrong direction?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the holder is the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA clamp end or arm that is cracked or broken off\u003c\/li\u003e\n\u003cli\u003eOne arm that sits at a different angle from the other when viewed face on\u003c\/li\u003e\n\u003cli\u003eAn arm twisted so its clamp end no longer faces the same way as its partner\u003c\/li\u003e\n\u003cli\u003eA stem that leans or is cracked at its foot or mount\u003c\/li\u003e\n\u003cli\u003eA nozzle that is firmly held but visibly points away from its neighbours\u003c\/li\u003e\n\u003cli\u003eA spray stripe or gap that appeared after a knock and stays at one position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the holder is not the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeak or uneven spray from a nozzle that points correctly\u003c\/strong\u003e — clean or replace the nozzle tip and its filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDripping after shut-off\u003c\/strong\u003e — a check valve symptom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA nozzle that moves or wobbles in its position\u003c\/strong\u003e — check the Nozzle Clip first\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA leak at the nozzle body\u003c\/strong\u003e — a seal or O-ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe same fault at every position\u003c\/strong\u003e — the pump, the flow system or the mix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA quick check:\u003c\/strong\u003e with the aircraft powered down and the battery out, stand square to the holder and look at it face on. The two arms should mirror each other about the stem. Then compare it with a holder at another position. If one holder's arms are not at the same angles as its neighbour's, that holder has moved.\u003c\/p\u003e\n\u003cp\u003eMake that check first, while that information is still cheap. It takes seconds per holder, and it separates a geometry fault from a nozzle fault before any nozzles are changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwap test for a spray fault:\u003c\/strong\u003e move the suspect nozzle to a healthy position. If the fault follows the nozzle, the nozzle is the cause. If it stays at the position, look at the holder there, then the hose and valve.\u003c\/p\u003e\n\u003cp\u003eDo not bend a holder back into shape. A moulding that has been bent and straightened can look right and still carry a crack, and it will move again at the next knock.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the spray nozzle holder when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack in an arm, a clamp end, the stem or the foot\u003c\/li\u003e\n\u003cli\u003eAn arm or clamp end broken off\u003c\/li\u003e\n\u003cli\u003eArms that no longer mirror each other about the stem\u003c\/li\u003e\n\u003cli\u003eA twisted arm, so the two clamp ends face different ways\u003c\/li\u003e\n\u003cli\u003eA stem that leans or is cracked at its mount\u003c\/li\u003e\n\u003cli\u003eBroken tabs on a clamp end so the nozzle no longer locates\u003c\/li\u003e\n\u003cli\u003eA holder that has been bent back, glued or taped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they cause spray faults that are blamed on the holder:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe nozzle tip — wear, blockage or damage\u003c\/li\u003e\n\u003cli\u003eThe nozzle filter\u003c\/li\u003e\n\u003cli\u003eThe nozzle clip\u003c\/li\u003e\n\u003cli\u003eThe check valve and the seals at the nozzle\u003c\/li\u003e\n\u003cli\u003eThe hose and clamp feeding that position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the nozzle holder. It is replaced when it is cracked, broken or out of its moulded shape, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T16 OEM Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying — nozzle positioning\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Moulded Y-shaped nozzle holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Vertical stem with a squared foot; two angled arms branching from the top, each ending in a clamp end\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eArm angle:\u003c\/strong\u003e Not published for this part; moulded in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e On the spray system at a nozzle position, carrying the nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fitted at its mounting point in place of the old holder, nozzles moved across; no published tightening value\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spray system part\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the tank, flush the spray system with clean water and let it drain\u003c\/li\u003e\n\u003cli\u003eWear gloves and eye protection; residue collects at the nozzles\u003c\/li\u003e\n\u003cli\u003ePhotograph the holder in place from the front and the side, so the hose routing and nozzle orientation are on record\u003c\/li\u003e\n\u003cli\u003eCompare the new holder with the old one: stem, foot, arm angles and clamp ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the nozzles and their clips from the old holder, keeping each with its own seal and filter\u003c\/li\u003e\n\u003cli\u003eRelease any hoses from the holder without straining them\u003c\/li\u003e\n\u003cli\u003eRemove the old holder from its mounting point without levering against the spray bar or arm\u003c\/li\u003e\n\u003cli\u003eFit the new holder the same way round as the old one, as shown in your photograph\u003c\/li\u003e\n\u003cli\u003eRefit the nozzles, clips, seals and hoses; do not force a nozzle that will not seat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStand square to the holder and check that both arms mirror each other and match the neighbouring holders\u003c\/li\u003e\n\u003cli\u003eCheck that every nozzle is firmly held and points the same way as its neighbours\u003c\/li\u003e\n\u003cli\u003eFill the tank with clean water and run the pump on the ground\u003c\/li\u003e\n\u003cli\u003eWatch the spray from that position and compare the pattern with its neighbours\u003c\/li\u003e\n\u003cli\u003eCheck for drips and leaks at each nozzle under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the holders with the rest of the spray system at the end of each day. On the pre-flight walk-around, look at every holder face on; a bent arm is obvious when it is compared with its neighbour. After any ground strike, landing in crop or knock on a post, check the holders at that side of the aircraft before the next flight.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis holder is for operators and technicians keeping T16 nozzles where the spray pattern needs them:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T16 operators replacing a holder cracked or broken in a knock\u003c\/li\u003e\n\u003cli\u003eT16 operators chasing a stripe or gap that stays at one nozzle position\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators working orchards, vines and field edges where low parts take knocks\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding spray systems after a hard landing\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping a spare holder in the field kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe nozzle is held and points correctly but sprays weakly or unevenly — clean or replace the nozzle tip and filter\u003c\/li\u003e\n\u003cli\u003eThe nozzle wobbles or moves in its position — check the Nozzle Clip first\u003c\/li\u003e\n\u003cli\u003eThe aircraft drips after shut-off — that is a check valve\u003c\/li\u003e\n\u003cli\u003eThe bar or arm the holder mounts to is cracked or bent — check that part first\u003c\/li\u003e\n\u003cli\u003eEvery position sprays badly — look at the pump, flow system and mix\u003c\/li\u003e\n\u003cli\u003eYou fly a T20, T20P, T10, T30, T40 or T50 — this holder is identified only for the T16\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe spray nozzle holder matters because on a spray aircraft, where a nozzle points is where the product lands. The nozzle decides how the spray is made. The holder decides where it goes.\u003c\/p\u003e\n\u003cp\u003eThat is why a damaged holder is easy to miss. A cracked holder or a broken arm is obvious. A bent one is not. It still grips its nozzles firmly, the nozzles still spray well, and every check of the nozzle, filter and clip comes back clean. The only evidence is in the field: a stripe of heavy coverage, a gap, or a double strip at the edge of the swath, always from the same position.\u003c\/p\u003e\n\u003cp\u003eThe check is simple. Stand square to the holder, look at it face on, and compare it with its neighbour. Two arms that mirror each other mean the geometry is right and the fault is in the nozzle assembly. Arms at different angles, or clamp ends facing different ways, mean the holder has moved and is the part to replace.\u003c\/p\u003e\n\u003cp\u003eEqually, the holder is the wrong part to buy for a worn tip, a blocked filter, a dripping valve or a loose clip. A new holder under a worn tip still sprays unevenly. The test that separates them takes seconds.\u003c\/p\u003e\n\u003cp\u003eDo not straighten a bent holder and fly on. A moulding that has been bent and pushed back can look right and still carry a crack, and the next knock moves it again — usually in the middle of a job.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T16 OEM Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Spray nozzle holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e On the spray system at a nozzle position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Carries the nozzles at a fixed spacing and angle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black Y-shaped moulding: vertical stem with squared foot, two angled arms ending in clamp ends\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Nozzles, tips, filters, nozzle clips, check valves, seals, hoses, spray bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical function:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Look at the holder face on and compare it with its neighbour; arms that do not mirror each other mean the holder has moved\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked or broken arm or clamp end, bent or twisted arm, cracked stem or foot\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical misdiagnosis:\u003c\/strong\u003e A bent holder's off-target spray blamed on the nozzle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spray system part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T16 nozzle holder; T16 nozzle holding; T16 nozzle bracket; T16 Y nozzle mount; Agras T16 nozzle arm; DJI T16 sprinkler holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a nozzle, not the Nozzle Clip, not a nozzle filter, not a check valve, not the spray bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T16 spray nozzle holder\u003c\/p\u003e\n\u003cp\u003eDJI T16 nozzle holder\u003c\/p\u003e\n\u003cp\u003eT16 nozzle holding\u003c\/p\u003e\n\u003cp\u003eAgras T16 nozzle bracket\u003c\/p\u003e\n\u003cp\u003eT16 Y nozzle holder\u003c\/p\u003e\n\u003cp\u003eT16 nozzle mount\u003c\/p\u003e\n\u003cp\u003eDJI T16 sprinkler holder\u003c\/p\u003e\n\u003cp\u003eT16 broken nozzle holder\u003c\/p\u003e\n\u003cp\u003eT16 nozzle arm\u003c\/p\u003e\n\u003cp\u003eT16 nozzle spraying sideways\u003c\/p\u003e\n\u003cp\u003eT16 spray stripe one nozzle\u003c\/p\u003e\n\u003cp\u003eAgras T16 spray nozzle bracket\u003c\/p\u003e\n\u003cp\u003eT16 nozzle holder replacement part\u003c\/p\u003e\n\u003cp\u003eDJI T16 spray parts\u003c\/p\u003e\n\u003cp\u003eAgras T16 Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 OEM Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003eAgras T16 spray nozzle holder replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras nozzle parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 Spray Nozzle Holder Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T16 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T16 spray nozzle holder?\u003c\/strong\u003e A black Y-shaped moulding — a vertical stem with two angled arms ending in clamp ends — that carries the spray nozzles at their position on the T16. It is one holder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T16.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T20?\u003c\/strong\u003e It is identified only for the T16. Do not fit it to a T20, T20P, T10, T30, T40 or T50 on the strength of a similar shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre nozzles included?\u003c\/strong\u003e No. The holder comes on its own. Move the nozzles, clips, seals and filters across from the old holder, or replace damaged ones separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the nozzle clip?\u003c\/strong\u003e No. The Nozzle Clip is a small orange ring that retains a nozzle. The holder is the Y-shaped moulding that carries the nozzles and sets where they point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne nozzle sprays a stripe off to one side. Is it the holder?\u003c\/strong\u003e It may be. Look at the holder face on and compare it with its neighbour. If its arms do not mirror each other, the holder has been bent and is aiming the nozzle off line. If it matches, check the nozzle tip and filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bend a bent holder back?\u003c\/strong\u003e Not as a repair. A moulding that has been bent and straightened can carry a crack and will move again at the next knock. Replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe nozzle wobbles. Do I need a new holder?\u003c\/strong\u003e Check the nozzle clip first. A wobbling nozzle is usually a missing or worn clip. Replace the holder if its clamp end is cracked or its tabs are broken.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old holder face on and from the side and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the arm angle adjustable?\u003c\/strong\u003e No. The angle is moulded in. The holder is either at its shape or it is not; there is no adjustment or app setting that compensates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many holders does the T16 use?\u003c\/strong\u003e Count the holders on your aircraft and replace the one that is damaged. If you are not sure which position yours came from, photograph it in place and we will confirm it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fly with a cracked holder?\u003c\/strong\u003e It is not a good idea. A cracked arm can move or let go under vibration and spray pressure, and the nozzle it carries goes with it. Replace it first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Photograph the holder in place, move the nozzles and hoses across, fit the new holder the same way round, then check that its arms match its neighbour and that the nozzles point the same way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new holder fix weak spray?\u003c\/strong\u003e Only if the old one was broken. Weak or uneven spray from a nozzle that points correctly is a tip, filter, pump or mix problem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace a holder when it is cracked, broken or out of shape. Look at every holder face on during the pre-flight walk-around.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T16","offer_id":68079581167936,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t16-oem-spray-nozzle-holder-1.png?v=1794326818","url":"https:\/\/aresacres.com\/es\/products\/dji-agras-t16-oem-spray-nozzle-holder","provider":"Ares Acres","version":"1.0","type":"link"}