{"product_id":"dji-agras-t30-oem-load-collection-board","title":"DJI Agras T30 OEM Load Collection Board","description":"\u003cp\u003eThe DJI Agras T30 OEM Load Collection Board is the sealed board module in the payload system of the DJI Agras T30 and T10 spray aircraft. As its designation says, its job is collection: it gathers the load signals of the payload system through the connector ports on its housing and passes them on to the aircraft. It is identified for the DJI Agras T30 and T10, and it is supplied brand new as one sealed unit: a black, near-square housing with a screw ear at each corner, a raised connector housing at its top edge, raised housings along both sides, a white label and a printed QR code on its face, as shown in the product images. Operators look for it as a T30 load collection board, a T10 load board, an Agras T30 payload board or a T30 T10 weighing collection module after payload readings in the app go wrong, a port is damaged, or water has reached the board. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10 payload system\u003c\/li\u003e\n\u003cli\u003eMatched by housing outline, corner screw ears and connector housing layout against the board you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM load collection board, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhotograph the board you removed from the face side, with its connector housings and label in view, and send it to us. We will match it for you, so the right board arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Load Collection Board, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne sealed board module.\u003c\/strong\u003e The board is supplied as a complete unit in its black housing. It is not a bare circuit board, and it is not a set of sensors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it is:\u003c\/strong\u003e the collector, not the things it collects from. The sensors and cables that feed its ports are separate parts and stay with the aircraft.\u003c\/p\u003e\n\u003cp\u003eNot included: payload sensors, the cables that plug into the board's ports, mounting screws, brackets, covers, and any tank, hopper or frame hardware. The product images show screws seated in the corner ears; fixing hardware is not supplied with the board, so keep your original screws when you remove the old one.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. If an image shows anything not named above, it is not part of the board.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA spray aircraft has to know what it is carrying. The payload system produces load signals, and something has to gather them in one place and hand them to the aircraft. On the Agras T30 and T10 that gathering point is the load collection board: its name describes its role, and its housing shows it is built as the meeting point of several connections.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the board is a black, sealed, near-square housing. Its visible features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA sealed black housing\u003c\/strong\u003e with a raised, flat centre panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour screw ears\u003c\/strong\u003e, one at each corner, where the board is fixed to the aircraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA raised connector housing\u003c\/strong\u003e on the top edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised housings along the left and right sides\u003c\/strong\u003e, standing proud of the main body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA white label and a printed QR code\u003c\/strong\u003e on the face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA stepped outer flange\u003c\/strong\u003e around the housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere it sits and what it touches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e payload, the part of the aircraft that carries and monitors what it applies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e load signals arriving through the cables plugged into its connector ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e the collected signals passed on to the aircraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e fixed at its four corner ears in the payload system of the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe payload system is the wettest, most chemical-exposed part of a spray aircraft. A board fitted there sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray mist and residue from filling, spraying and spills at the tank\u003c\/li\u003e\n\u003cli\u003eRinse water every time the tank and frame are washed\u003c\/li\u003e\n\u003cli\u003eVibration through the frame on every flight\u003c\/li\u003e\n\u003cli\u003eShock loads from a full tank on hard landings\u003c\/li\u003e\n\u003cli\u003eStrain at the ports whenever the payload system is opened for service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoards in this position are replaced for a short list of reasons: a board that has failed and no longer passes signals on, a cracked housing or broken corner ear after a crash, a damaged connector port, or corrosion after water got past the seals.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe board's engineering role is aggregation. Each load signal arrives at its own port. The board collects those inputs and passes them on to the aircraft as one source, so the aircraft can use what the payload system reports.\u003c\/p\u003e\n\u003cp\u003eIn the payload system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccepts load signals through the connector ports on its housing\u003c\/li\u003e\n\u003cli\u003eCollects those inputs in one sealed unit\u003c\/li\u003e\n\u003cli\u003ePasses the collected signals on to the aircraft\u003c\/li\u003e\n\u003cli\u003eHolds its position through its four corner ears, so the cables are not carrying the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA detailed port map, signal format and electrical rating are not published for this part. What matters for a repair is visible on the part: one sealed body, several connector housings, four fixing ears, and each cable going back to the port it came from.\u003c\/p\u003e\n\u003cp\u003eWhat the load collection board does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not measure anything itself; it collects what its inputs give it\u003c\/li\u003e\n\u003cli\u003eIt does not cure a damaged sensor feeding one of its ports\u003c\/li\u003e\n\u003cli\u003eIt does not cure a cut, crushed or corroded cable to one of its ports\u003c\/li\u003e\n\u003cli\u003eIt does not cure a cable left half-seated in its port\u003c\/li\u003e\n\u003cli\u003eIt does not cure a reading that needs recalibrating in the app\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a collector repeats what it is fed\u003c\/h2\u003e\n\u003cp\u003eWhen a payload reading in the app goes wrong, the board that collects the readings is the obvious suspect: it is the one place every reading passes through. But a collector repeats what it is fed. A damaged sensor, a cut cable or a half-seated plug upstream of the board produces a bad reading that the board passes on faithfully, and a new board passes on the same bad reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe question to settle:\u003c\/strong\u003e is one input wrong, or is everything the board handles wrong?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne input wrong, the rest sensible:\u003c\/strong\u003e the fault is almost always upstream of the board, on that one input: its sensor, its cable or its plug. The board is handling the other inputs correctly, which is good evidence the board itself is working.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEverything the board handles is wrong or missing at once:\u003c\/strong\u003e now the board, its own connection onward to the aircraft, or its power is the suspect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClear these first, in this order:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration.\u003c\/strong\u003e Where the app offers a calibration for the payload system, run it with the aircraft level and the tank in the state the app asks for. A reading that only needed calibrating is not a hardware fault.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug seating.\u003c\/strong\u003e Reseat every cable at the board's connector housings, one at a time, and recheck. One half-seated plug is enough to upset one input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe ports.\u003c\/strong\u003e Look into each port for residue, corrosion or bent contacts after a wash or a spill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe cables.\u003c\/strong\u003e Run each cable back from the board looking for a pinch, a cut or a crushed section, especially where it passes edges or moving parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe inputs themselves.\u003c\/strong\u003e If one input stays wrong with its cable and plug sound, look at whatever feeds that input before the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point at the board itself:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery input the board handles is wrong or missing together, with calibration done and every plug reseated\u003c\/li\u003e\n\u003cli\u003eA cracked housing, a broken corner ear or a damaged connector housing\u003c\/li\u003e\n\u003cli\u003eLiquid, residue or corrosion inside a port, or signs that water got past the housing\u003c\/li\u003e\n\u003cli\u003eScorching, discolouration or a burnt smell at the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe board is the last thing on the payload side to condemn. Clear the inputs one at a time while that information is still cheap, and a fault that survives all of them is the board's.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the load collection board when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery input the board handles is wrong or missing together, after calibration and with every plug reseated\u003c\/li\u003e\n\u003cli\u003eA cracked or crushed housing\u003c\/li\u003e\n\u003cli\u003eA broken corner screw ear, so the board can no longer be held firmly\u003c\/li\u003e\n\u003cli\u003eA damaged connector housing or port on the board\u003c\/li\u003e\n\u003cli\u003eCorrosion, residue or liquid inside a port or the housing after water entry\u003c\/li\u003e\n\u003cli\u003eScorch marks, discolouration or a burnt smell at the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePayload calibration in the app, where it is offered\u003c\/li\u003e\n\u003cli\u003eThe seating of every cable at the board\u003c\/li\u003e\n\u003cli\u003eEach cable from the board back to its source\u003c\/li\u003e\n\u003cli\u003eWhatever feeds an input that is wrong on its own\u003c\/li\u003e\n\u003cli\u003eThe ports, for residue after a wash or a spill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for this board. It is replaced when it has failed or been damaged, not on a calendar.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Load Collection Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30; DJI T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Load collection board, sealed board module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black, sealed, near-square housing with a raised centre panel and stepped flange\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectors:\u003c\/strong\u003e Raised connector housing on the top edge; raised housings along both sides; port assignment not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Four screw ears, one at each corner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMarkings:\u003c\/strong\u003e White label and printed QR code on the face\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e Collects load signals of the payload system; signal format and ratings not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Payload system of the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fixed through its four corner ears; cables reconnected to their own ports\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Payload sensors, cables, mounting screws, brackets, covers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None in the board; calibration of the payload system is done in the app where offered\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM payload-system electronics\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down, remove the battery, and wait until the system is fully off\u003c\/li\u003e\n\u003cli\u003eEmpty, rinse and dry the tank area and the board's surroundings so no residue falls into a port\u003c\/li\u003e\n\u003cli\u003eClear the free checks first: calibration where offered, plug seating, ports and cables\u003c\/li\u003e\n\u003cli\u003ePhotograph the old board in place from the face side, with every cable and its port in view\u003c\/li\u003e\n\u003cli\u003eLabel each cable with the port it came from before unplugging anything\u003c\/li\u003e\n\u003cli\u003eLay the new board beside the old one and compare outline, corner ears and connector housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug each cable by its connector body, never by the wire\u003c\/li\u003e\n\u003cli\u003eRelease the four corner fixings and keep the screws together\u003c\/li\u003e\n\u003cli\u003eLift the board out without levering against any cable\u003c\/li\u003e\n\u003cli\u003eClean and dry the mounting face so the new board sits flat on all four ears\u003c\/li\u003e\n\u003cli\u003eSeat the new board in the same orientation as your photographs show\u003c\/li\u003e\n\u003cli\u003eRefit the four corner screws evenly, crossing from corner to corner; no torque figure is published, so snug them without cracking an ear\u003c\/li\u003e\n\u003cli\u003eReconnect every cable to the port on its label until fully seated\u003c\/li\u003e\n\u003cli\u003eRoute each cable as it was, clear of sharp edges, moving parts and the spray path\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that every cable is seated and every corner screw is snug before fitting the battery\u003c\/li\u003e\n\u003cli\u003ePower up and check the app for payload warnings\u003c\/li\u003e\n\u003cli\u003eWhere the app offers a calibration for the payload system, run it as the app directs\u003c\/li\u003e\n\u003cli\u003eConfirm the payload readings make sense with the tank empty and again with a known load\u003c\/li\u003e\n\u003cli\u003eMake a short test flight before a full job\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e The board is sealed; its weak points are the ports and the cables that enter them. Rinse gently around the board rather than at it, keep residue out of the connector housings, and check the cables for chafe whenever the payload system is opened. A clean, dry port is worth more to this board than anything else you can do for it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis board is for operators and technicians keeping the payload system of a DJI Agras T30 or T10 reporting correctly:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators with a payload-reading fault traced to the board\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spray and spreading applicators running the T30 or T10\u003c\/li\u003e\n\u003cli\u003eAgras service centres and repair technicians working on the payload system\u003c\/li\u003e\n\u003cli\u003eCrash-repair technicians replacing a board with a broken ear or damaged port\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own aircraft who want correct payload readings back\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnly one input reads wrong while the rest are sensible; look at that input's cable, plug and source first\u003c\/li\u003e\n\u003cli\u003eCalibration in the app clears the problem\u003c\/li\u003e\n\u003cli\u003eReseating a cable at the board clears the problem\u003c\/li\u003e\n\u003cli\u003eA cable to the board is cut or crushed; that is the cable\u003c\/li\u003e\n\u003cli\u003eYou fly any Agras model other than the T30 or T10; this board is identified for those two only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA collector repeats what it is fed. That one fact decides whether this board is the repair or a detour.\u003c\/p\u003e\n\u003cp\u003eEvery payload reading passes through the load collection board, so when a reading goes wrong the board is the obvious part to suspect. But if one input is wrong and the others are right, the board has just proved it works: it is collecting the good inputs correctly and passing on the bad one faithfully. A new board in that situation passes on the same bad reading, and the payload system is exactly where it was.\u003c\/p\u003e\n\u003cp\u003eThe board is the repair when the fault is the board's: everything it handles is wrong together after calibration and reseating, or the housing, an ear or a port is damaged, or water has reached inside. Then this sealed unit is the part that brings the payload system's readings back to the aircraft.\u003c\/p\u003e\n\u003cp\u003eFit it with every cable going back to its own port, run any calibration the app offers, and check the readings empty and loaded before going back to work.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure which board you have, send us a photograph of the one you removed and we will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Load Collection Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30; DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Load collection board, sealed board module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Payload system, fixed at four corner ears\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Collects the load signals of the payload system through its ports and passes them on to the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black sealed near-square housing; four corner screw ears; raised connector housing on the top edge; raised housings on both sides; white label; printed QR code\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Payload sensors, cables, mounting screws, brackets, covers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e One input wrong with the rest sensible points upstream of the board; everything wrong together points at the board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Electrical failure, cracked housing or broken ear after a crash, damaged port, corrosion after water entry\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon misdiagnosis:\u003c\/strong\u003e A bad sensor or cable upstream is blamed on the board that passes its reading on\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM payload-system electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 load collection board; T10 load board; Agras T30 payload board; T30 T10 weighing collection module; DJI T30 load board; Agras T10 load collection board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a sensor, not a cable, not a flight controller, not a power distribution board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 load collection board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 load collection board\u003c\/p\u003e\n\u003cp\u003eT30 T10 load collection board\u003c\/p\u003e\n\u003cp\u003eAgras T30 payload board\u003c\/p\u003e\n\u003cp\u003eAgras T10 payload board\u003c\/p\u003e\n\u003cp\u003eDJI T30 load board\u003c\/p\u003e\n\u003cp\u003eT30 load collection board replacement\u003c\/p\u003e\n\u003cp\u003eT10 load collection board replacement\u003c\/p\u003e\n\u003cp\u003eAgras T30 payload reading wrong\u003c\/p\u003e\n\u003cp\u003eDJI T30 weighing collection module\u003c\/p\u003e\n\u003cp\u003eAgras T30 Load Collection Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Load Collection Board\u003c\/p\u003e\n\u003cp\u003eAgras T30 load collection board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T10 Load Collection Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Load Collection Board\u003c\/p\u003e\n\u003cp\u003eAgras T10 load collection board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 payload system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras avionics and control boards\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Load Collection Board Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 load collection board?\u003c\/strong\u003e It is the sealed board in the payload system that collects load signals through its connector ports and passes them on to the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the T10 board the same as the T30 board?\u003c\/strong\u003e The board is identified for both aircraft. The variant records which one you fly, and we compare it with the board you removed if you send a photograph.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a sensor?\u003c\/strong\u003e No. It collects what its inputs report; it does not measure anything itself. Sensors and cables are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne payload reading is wrong. Is the board bad?\u003c\/strong\u003e Probably not. If one input is wrong and the others are sensible, the board is working. Check that input's plug, cable and source first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEvery payload reading is wrong. Is it the board?\u003c\/strong\u003e It may be. Run any calibration the app offers and reseat every cable first. If everything is still wrong together, the board is the suspect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with cables?\u003c\/strong\u003e No. The cables that plug into its ports stay with the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with screws?\u003c\/strong\u003e No. The product images show screws in the corner ears, but fixing hardware is not supplied with the board. Keep your original screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe board got wet during washing. Do I need a new one?\u003c\/strong\u003e Dry it and inspect every port. If there is corrosion or residue inside a port, or the readings stay wrong after drying, replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne corner ear is broken. Can I keep using it?\u003c\/strong\u003e A board that cannot be held at all four corners moves with vibration and strains its cables. Replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to calibrate after fitting it?\u003c\/strong\u003e Where the app offers a calibration for the payload system, run it as the app directs after fitting, then check the readings empty and loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old board and send it to us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Label every cable, photograph the board in place, power down, fix all four corners evenly, reconnect every cable to its own port and calibrate where the app asks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it new?\u003c\/strong\u003e Yes. The board is supplied brand new.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it has failed or been damaged. Keeping its ports clean and dry is the maintenance that matters.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68080343253312,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68080343286080,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-load-collection-board-1.png?v=1794331381","url":"https:\/\/aresacres.com\/es\/products\/dji-agras-t30-oem-load-collection-board","provider":"Ares Acres","version":"1.0","type":"link"}