{"product_id":"dji-agras-t30-oem-radar-signal-cable","title":"DJI Agras T30 OEM Radar Signal Cable","description":"\u003cp\u003eThe DJI Agras T30 OEM Radar Signal Cable is the wiring lead that carries the radar signal in the sensing system of the DJI Agras T30, the system the aircraft relies on for terrain following and obstacle sensing. As shown in the product images, it is a long black cable lead, photographed in a loose loop, with two black sealed plugs lying side by side at its ends and white label bands on the lead near each plug. It is the cable only, not a radar module and not a radar mount. One cable is supplied per unit, and it is identified for the DJI Agras T30, offered as a single DJI T30 variant. Operators usually reach it while searching for a T30 radar cable, a T30 radar wire, a T30 radar not detected fault, a T30 radar that drops out in flight, a T30 terrain follow warning or a chafed radar lead on a T30. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 sensing system, radar signal wiring position, offered as a single DJI T30 variant\u003c\/li\u003e\n\u003cli\u003eMatched by the long black lead, the two black sealed plugs and the white label bands against the cable you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM sensing system component, brand new, supplied as one cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe unit is one cable. If you want the match confirmed, photograph both plugs of the cable you removed face-on, and the route it took on the aircraft, and send them to us. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Radar Signal Cable — long black lead with two black sealed plugs and white label bands, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the cable, not the radar.\u003c\/strong\u003e The radar modules on the T30 are separate parts. The omnidirectional radar is offered as the DJI Agras T16\/T20\/T30\/T40 Radar Module, and the radar that faces up is offered as the DJI Agras T30 OEM Upward Radar Module. If a radar housing is cracked, its face is damaged or the module itself has failed, this cable will not replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the cable:\u003c\/strong\u003e the black lead, the two sealed plugs fitted to it and the white label bands, all supplied together as one piece.\u003c\/p\u003e\n\u003cp\u003eNot included: radar modules, radar mounts and brackets, cable ties, clips, grommets, screws, sealant, dielectric grease and tools. Nothing is included because it appears near the cable in a photograph.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe T30 flies low over crops and close to obstacles, and it does both on the strength of its radar. A radar module measures, but the measurement is useless until it reaches the aircraft's flight control. The radar signal cable is the path it takes. When the cable carries cleanly, the aircraft knows the height of the canopy and what is in front of it. When it does not, the aircraft loses that information, and it says so with radar warnings, lost terrain following or a refusal to run the radar-dependent modes.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the cable has three features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe lead\u003c\/strong\u003e — a long black cable, long enough to run from the radar's position to where it joins the aircraft wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe plugs\u003c\/strong\u003e — two black sealed plugs, one at each end of the lead, shown lying side by side because the cable is photographed in a loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe label bands\u003c\/strong\u003e — white bands on the lead near the plugs, used to identify the cable in the harness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhich plug goes to the radar side and which to the aircraft side is decided by the connectors on your aircraft, not by the label bands. Photograph both ends of the old cable in place before you unplug anything.\u003c\/p\u003e\n\u003cp\u003eOver a working season a radar signal cable sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstant vibration from the rotors, carried through the frame to every point where the cable is clipped\u003c\/li\u003e\n\u003cli\u003eFlexing at the points where the lead leaves each plug\u003c\/li\u003e\n\u003cli\u003eSpray drift and dust settling on the lead and around the plugs\u003c\/li\u003e\n\u003cli\u003eWash water aimed at the underside and the frame at the end of the day\u003c\/li\u003e\n\u003cli\u003eAbrasion where the lead crosses an edge, a clip or a frame member\u003c\/li\u003e\n\u003cli\u003eKnocks to the radar area in hard landings and when the aircraft is loaded and transported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA radar signal cable is replaced because a conductor has broken inside the insulation, because the insulation has chafed through against the frame, because a plug's pins have corroded or been pushed back, or because a plug body has cracked in a knock. The first of these is the one that misleads, because the lead looks whole.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe cable's engineering role is continuity under vibration. It carries the radar's signal, and whatever supply the radar draws through it, between the radar module and the aircraft, conductor for conductor, without a break, a short or a high-resistance joint, while the aircraft shakes it for the whole of every flight. A cable that only carries when it is still is not doing its job, because the aircraft is never still when the radar matters.\u003c\/p\u003e\n\u003cp\u003eOn the aircraft it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJoins the radar module to the aircraft wiring\u003c\/li\u003e\n\u003cli\u003eCarries the radar's signal to the flight control\u003c\/li\u003e\n\u003cli\u003eKeeps its conductors separate from each other and from moisture and residue\u003c\/li\u003e\n\u003cli\u003eFollows the route of the original cable, clipped where the original was clipped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not measure height or detect obstacles; the radar module does\u003c\/li\u003e\n\u003cli\u003eIt does not decide how the aircraft responds to an obstacle; the flight control does\u003c\/li\u003e\n\u003cli\u003eIt does not hold the radar in position; the radar mount and its bracket do\u003c\/li\u003e\n\u003cli\u003eIt does not cure a radar whose face is damaged, dirty or blocked\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat division matters because a cable fault and a radar fault look the same from the controller. Both report a radar problem. The difference is found only by testing the cable, and the cable is the half of the pair that lives in the moving, vibrating route between the two.\u003c\/p\u003e\n\u003cp\u003eThe honest case for this part follows. If the radar reports intermittently, test the cable under flexing before the radar module. If the cable tests good end to end and the fault stays, the radar module or the aircraft side is the next suspect, and this cable is not the fix.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a radar that drops out in the air but passes on the bench is the lead flexing, until a flex test proves otherwise\u003c\/h2\u003e\n\u003cp\u003eThe characteristic radar cable fault is intermittent. On the ground, with the aircraft still, the radar reports normally. In the air, under vibration, a conductor that has cracked inside its insulation opens and closes, and the radar drops out, comes back, and drops out again. The radar module gets the blame because it is the part named in the warning, and a radar module fitted to the same cable behaves exactly the same.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug test.\u003c\/strong\u003e Power the aircraft down and remove the battery. Unplug both ends of the cable and look into each plug face under a good light. Clean pins are bright and sit level in their housing. Green or white crust, a dull pin, a pin pushed back, a cracked plug body or a damp plug interior is a fault you can see. Check the mating plugs on the radar and on the aircraft the same way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContinuity and flex test.\u003c\/strong\u003e With both ends unplugged, use a multimeter on continuity to check each conductor pin to pin from one end to the other. Then repeat the check while slowly flexing the lead along its whole length, paying most attention to the first few centimetres behind each plug and every point where the cable was clipped. A reading that drops out while the lead is flexed is a broken core inside insulation that still looks whole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoute check.\u003c\/strong\u003e Follow the route the cable took on the aircraft and look for shiny, flattened or worn patches on the lead where it touched the frame, an edge or a clip. A worn patch on the lead usually has a matching witness mark on whatever it rubbed against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the cable is the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadar warnings that come and go in flight but clear on the ground\u003c\/li\u003e\n\u003cli\u003eA radar fault that changes when the cable is moved or pressed with the aircraft powered on the ground\u003c\/li\u003e\n\u003cli\u003eA conductor that fails continuity, or fails only when the lead is flexed\u003c\/li\u003e\n\u003cli\u003eCorroded, crusted, dull or pushed-back pins in either plug\u003c\/li\u003e\n\u003cli\u003eChafed, flattened, cut or crushed insulation along the route\u003c\/li\u003e\n\u003cli\u003eThe fault follows the cable when a known-good cable is fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the cable is not the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe cable passes the plug, continuity and flex tests\u003c\/strong\u003e — the radar module or the aircraft side is the next suspect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe radar housing is cracked or its face is damaged\u003c\/strong\u003e — that is the radar module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe radar face is caked with residue or mud\u003c\/strong\u003e — clean the radar face first\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe radar mount is bent or loose\u003c\/strong\u003e — the radar is pointing the wrong way; that is the mount, not the wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarnings appeared after a firmware change and are constant\u003c\/strong\u003e — check the aircraft's firmware state before the hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake those checks first, while that information is still cheap. A multimeter, a light and ten minutes settle it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe trap on this part.\u003c\/strong\u003e A new radar module plugged into a cable with a cracked core will pass every ground check and fail again in the first vibrating minute of flight. The conclusion drawn is that the new radar is faulty too. The lead, which looked fine, was the cause.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the cable when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA conductor that fails continuity end to end\u003c\/li\u003e\n\u003cli\u003eA conductor that drops out when the lead is flexed\u003c\/li\u003e\n\u003cli\u003eCorrosion on the pins of either plug that does not clean off to bright metal\u003c\/li\u003e\n\u003cli\u003ePins bent, pushed back or loose in a plug housing\u003c\/li\u003e\n\u003cli\u003eInsulation chafed, flattened, cut or crushed along the route\u003c\/li\u003e\n\u003cli\u003eA cracked plug body or a plug that no longer seats firmly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because their faults are often blamed on the cable or on the radar:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mating plugs on the radar module and on the aircraft\u003c\/li\u003e\n\u003cli\u003eThe radar face, for residue, mud or damage\u003c\/li\u003e\n\u003cli\u003eThe radar mount and its bracket, for bending or looseness\u003c\/li\u003e\n\u003cli\u003eThe clips and grommets along the cable route, which may have cut into the old lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the cable. It is replaced when it fails a plug, continuity or flex check or is damaged, not on a schedule. Clipping it exactly where the original was clipped, away from edges, is what keeps the new one alive.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Radar Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Sensing — radar signal wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Cable lead with a sealed plug at each end\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cable per unit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Long black lead with two black sealed plugs and white label bands near the plugs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black lead and plugs; white label bands\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e Not published for this part; matched against the cable you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePin count:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e Two black sealed plugs, as shown in the product images\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Along the cable route between the radar module and the aircraft wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Plugged in at both ends and routed and clipped along the path of the original cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Radar modules, radar mounts and brackets, cable ties, clips, grommets, screws, sealant, dielectric grease, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the cable conducts or it does not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupplied:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM sensing system part\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the radar area so no residue falls into an open plug\u003c\/li\u003e\n\u003cli\u003eTest the old cable at both plugs and pin to pin while flexing it, so you know the cable is the fault\u003c\/li\u003e\n\u003cli\u003ePhotograph the cable's full route, every clip and grommet, and both plug connections\u003c\/li\u003e\n\u003cli\u003eNote which end goes to the radar side and which to the aircraft side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease each plug before pulling; pull on the plug body, never on the lead\u003c\/li\u003e\n\u003cli\u003eFree the old cable from its clips and ties without cutting into anything nearby\u003c\/li\u003e\n\u003cli\u003eInspect and clean the mating plugs on the radar module and on the aircraft; corrosion left there will defeat the new cable\u003c\/li\u003e\n\u003cli\u003eCheck the clips, grommets and edges along the route for whatever wore through the old lead, and deal with it\u003c\/li\u003e\n\u003cli\u003eRoute the new cable exactly along the old path, away from sharp edges, rotor paths and moving parts\u003c\/li\u003e\n\u003cli\u003eSeat each plug fully until it is firmly home\u003c\/li\u003e\n\u003cli\u003eClip and tie the cable where the old one was secured, snug but not crushed, leaving a little slack behind each plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRefit the battery and power the aircraft up\u003c\/li\u003e\n\u003cli\u003eConfirm on the controller that the radar is detected and reporting\u003c\/li\u003e\n\u003cli\u003eWith the aircraft powered on the ground, gently move the cable along its route and confirm the radar status does not change\u003c\/li\u003e\n\u003cli\u003eFly a short, low-risk test over open ground and confirm there are no radar warnings\u003c\/li\u003e\n\u003cli\u003eRe-check the plugs and the route after the first working day\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse residue off the frame and radar area at the end of the day without blasting water into a plug face, and let it dry. Look along the cable route whenever the aircraft is serviced for any shiny or flattened patch on the lead; a lead that is starting to rub can be re-clipped long before it fails. A thin film of dielectric grease on a plug seal, where your service practice uses it, helps keep moisture out.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis cable is for operators and technicians keeping the T30's radar reporting:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators with radar warnings that come and go in flight\u003c\/li\u003e\n\u003cli\u003eT30 operators who have already replaced a radar module and still have the fault\u003c\/li\u003e\n\u003cli\u003eT30 owners with a radar lead chafed against the frame or crushed in a hard landing\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators relying on terrain following over uneven fields\u003c\/li\u003e\n\u003cli\u003eAgras service centres rewiring the sensing system at season service\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking sensing system wiring ahead of the season\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe cable passes the plug, continuity and flex tests — the radar module or the aircraft side is the next suspect\u003c\/li\u003e\n\u003cli\u003eThe radar housing is cracked or its face is damaged — that is the DJI Agras T16\/T20\/T30\/T40 Radar Module, or the DJI Agras T30 OEM Upward Radar Module if it is the radar that faces up\u003c\/li\u003e\n\u003cli\u003eThe radar is bent out of line — that is the radar mount or bracket\u003c\/li\u003e\n\u003cli\u003eThe radar face is simply dirty — clean it and test again\u003c\/li\u003e\n\u003cli\u003eYou fly a T10, T16, T20, T40 or T50 — this cable is identified only for the T30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe radar signal cable matters because it fails in the one way that hides from a bench check. A conductor cracked inside the insulation still makes contact while the aircraft sits on the ground. In flight, with the rotors shaking the frame and every clip point flexing the lead, the crack opens and closes, and the radar drops in and out.\u003c\/p\u003e\n\u003cp\u003eFrom the controller, that looks like a radar fault, so the radar module is replaced. The new module goes onto the same cable, passes on the ground, and drops out again in the air. The aircraft now has a new radar and the same problem.\u003c\/p\u003e\n\u003cp\u003eSo when the T30's radar reports intermittently, unplug both ends of the cable, look into each plug face, and check every conductor pin to pin with a multimeter while flexing the lead along its whole route, slowly, behind each plug and at every clip. A reading that drops out under flexing is the answer, and this cable is the fix. A cable that holds continuity through all of that is sound, and the fault lies in the radar module or the aircraft side.\u003c\/p\u003e\n\u003cp\u003eEqually, the cable is the wrong part for a cracked radar housing, a damaged radar face, a bent radar mount or a radar caked in residue. None of those is a wiring fault.\u003c\/p\u003e\n\u003cp\u003eWhen the new cable goes in, find whatever wore through the old one. A sharp edge or a hard clip that cut the first lead will cut the second.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Radar Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Radar signal cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Sensing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Along the cable route between the radar module and the aircraft wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Carries the radar signal between the radar module and the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Long black lead with two black sealed plugs and white label bands\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Radar modules, radar mounts, clips, ties, grommets, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Check each conductor pin to pin while flexing the lead along its whole route\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Broken conductor inside the insulation, chafed insulation, corroded or pushed-back pins, cracked plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical misdiagnosis:\u003c\/strong\u003e An intermittent radar dropout in flight blamed on the radar module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRule out first:\u003c\/strong\u003e Mating plugs, radar face cleanliness, radar housing damage, radar mount alignment\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupplied:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM sensing system part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 radar cable; T30 radar wire; T30 radar lead; T30 radar harness; T30 radar not detected; T30 radar drops out\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the DJI Agras T16\/T20\/T30\/T40 Radar Module, not the DJI Agras T30 OEM Upward Radar Module, not a radar mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 radar signal cable\u003c\/p\u003e\n\u003cp\u003eDJI T30 radar cable\u003c\/p\u003e\n\u003cp\u003eAgras T30 radar wire\u003c\/p\u003e\n\u003cp\u003eT30 radar lead replacement\u003c\/p\u003e\n\u003cp\u003eT30 radar harness\u003c\/p\u003e\n\u003cp\u003eT30 radar signal wire\u003c\/p\u003e\n\u003cp\u003eT30 radar not detected\u003c\/p\u003e\n\u003cp\u003eT30 radar drops out in flight\u003c\/p\u003e\n\u003cp\u003eT30 terrain follow radar warning\u003c\/p\u003e\n\u003cp\u003eT30 radar cable chafed\u003c\/p\u003e\n\u003cp\u003eT30 obstacle radar cable\u003c\/p\u003e\n\u003cp\u003eT30 radar intermittent fault\u003c\/p\u003e\n\u003cp\u003eT30 sensing system cable\u003c\/p\u003e\n\u003cp\u003eT30 radar plug corrosion\u003c\/p\u003e\n\u003cp\u003eT30 radar wiring repair\u003c\/p\u003e\n\u003cp\u003eAgras T30 Radar Signal Cable\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Radar Signal Cable\u003c\/p\u003e\n\u003cp\u003eAgras T30 radar signal cable replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 sensing system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 cables and wiring\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 repair parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Radar Signal Cable Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 radar signal cable?\u003c\/strong\u003e The wiring lead that carries the radar signal between a radar module and the aircraft on the T30: a long black lead with two black sealed plugs and white label bands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30, offered as a single DJI T30 variant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T10, T16, T20 or T40?\u003c\/strong\u003e No. This cable is identified only for the T30.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a radar module included?\u003c\/strong\u003e No. This is the cable only. The omnidirectional radar is the DJI Agras T16\/T20\/T30\/T40 Radar Module, and the radar that faces up is the DJI Agras T30 OEM Upward Radar Module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many do I get?\u003c\/strong\u003e One cable per unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy radar drops out in flight but works on the ground. Is it the radar or the cable?\u003c\/strong\u003e Test the cable first. A conductor cracked inside the insulation makes contact while the aircraft is still and breaks under vibration. Check every conductor pin to pin with a multimeter while flexing the lead along its route.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI replaced the radar module and the warning came back. Why?\u003c\/strong\u003e Most often because the cable feeding it has a broken core or corroded pins. A new radar on a faulty cable behaves exactly like the old one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe lead looks fine. Can it still be the problem?\u003c\/strong\u003e Yes. The common fault is a conductor broken inside insulation that is outwardly intact. Only a continuity test under flexing finds it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are both plugs shown at the same end?\u003c\/strong\u003e The cable is photographed in a loop, so its two ends lie side by side. It has a plug at each end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich end goes where?\u003c\/strong\u003e Match each plug to the connector the old cable used, and photograph the old cable in place before you unplug it. The label bands identify the cable; they do not decide the direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph both plugs of your old cable and send them to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Power down, remove the battery, photograph the route, unplug by the plug bodies, route the new cable along the old path and clip it where the old one was clipped.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I stop the new cable failing the same way?\u003c\/strong\u003e Find whatever wore through the old one. Clip the new lead exactly where the original was clipped, away from sharp edges, with a little slack behind each plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fix a radar with a cracked housing?\u003c\/strong\u003e No. A cracked housing or damaged radar face is the radar module, not its wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace the cable when it fails a plug, continuity or flex check or is damaged.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086842982720,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-radar-signal-cable-1.png?v=1794387281","url":"https:\/\/aresacres.com\/es\/products\/dji-agras-t30-oem-radar-signal-cable","provider":"Ares Acres","version":"1.0","type":"link"}