{"product_id":"dji-agras-t30-oem-remote-controller-button-board","title":"DJI Agras T30 OEM Remote Controller Button Board","description":"\u003cp\u003eThe DJI Agras T30 OEM Remote Controller Button Board is the black circuit board inside the aircraft's remote controller that carries its front-panel hardware controls. On one board it holds tactile push buttons, a row of small status LEDs along its top edge, a two-position slide switch, a rotary knob encoder at one end and a square ceramic antenna element at its centre, and it joins the rest of the controller through a wide ribbon connector and a small cable connector. It belongs to the remote controller, not to the aircraft itself, and it is identified for the DJI Agras T30 and T10. Operators usually reach it while searching for a T30 remote controller button not working, a T30 controller knob not responding, a T10 remote button board, or a T30 remote controller LED board after a drop or water exposure. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10 remote controller\u003c\/li\u003e\n\u003cli\u003eMatched by board outline, button and LED layout, slide switch, rotary knob and connector positions against the board you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM remote controller circuit board, brand new, with its controls and antenna element fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eController boards are easy to mix up once they are out of the case. If you want the match confirmed, photograph the board you removed flat, component side up, with both connectors in frame, and send it to us. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Remote Controller Button Board: the circuit board with its push buttons, status LEDs, slide switch, rotary knob encoder and ceramic antenna element fitted, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the board alone.\u003c\/strong\u003e It is one populated circuit board, not a controller and not a case assembly.\u003c\/p\u003e\n\u003cp\u003eNot included: the remote controller housing or front panel, the rubber or plastic button caps and the knob cap that sit over the board's controls, the ribbon cable and any internal cables that plug into the board, the control sticks, the screen, the internal battery, the cooling fan, the RF module, and any screws. Reuse the original caps, cables and screws if they are sound.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it sits near the board inside the controller. If a cap, cable or screw is missing from your removed assembly, tell us which one and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe button board is the part of the remote controller that the operator's fingers actually reach, once the caps and front panel are taken away. Every press of a front button, every turn of the knob and the switch position all start here, and the status LEDs that show through the case are on this board too.\u003c\/p\u003e\n\u003cp\u003eWhat it carries, from the product images:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTactile push buttons\u003c\/strong\u003e — small square switches with round plungers, set at both ends of the board under the case's button caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LEDs\u003c\/strong\u003e — a row of small LEDs along the raised top edge of the board, where they show through the case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA slide switch\u003c\/strong\u003e — a two-position switch near the lower centre of the board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA rotary knob encoder\u003c\/strong\u003e — the round control with a short shaft at the right-hand end, under the case's knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA ceramic antenna element\u003c\/strong\u003e — a square, tan ceramic block with a central pin, mounted at the middle of the board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e — a wide ribbon connector along the lower edge and a small cable connector at the left, which join the board to the rest of the controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing points\u003c\/strong\u003e — copper-ringed screw holes at the corners and along the edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause so much sits on one board, a single fault here can take out several controls at once, and a single fault elsewhere can make several of the board's controls look dead together. Telling those two apart is what this repair turns on.\u003c\/p\u003e\n\u003cp\u003eOver a working season the button board sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThousands of presses and turns, which wear switch contacts and loosen solder joints\u003c\/li\u003e\n\u003cli\u003eDrops off tailgates, trailers and spray rigs, which flex the board and crack its corners\u003c\/li\u003e\n\u003cli\u003eHumidity, spray drift and wash water that find their way through button caps and seams\u003c\/li\u003e\n\u003cli\u003eHeat inside the controller on long days in the sun\u003c\/li\u003e\n\u003cli\u003eCase opening for screen, fan or battery work, which unplugs and replugs its ribbon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eButton boards usually come out for one of three reasons: a single button, knob or switch that has stopped working; corrosion from liquid that got in around the controls; or a cracked board or torn connector after a drop. The fault people most often misread is a set of controls that all stop together, and that one is usually not the board at all.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe button board's engineering role is input and indication. It turns the operator's physical actions into electrical signals for the controller's main electronics, and it carries the LEDs that report status back.\u003c\/p\u003e\n\u003cp\u003eIn the remote controller it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounts the tactile push buttons under the case's button caps\u003c\/li\u003e\n\u003cli\u003eMounts the rotary knob encoder and the slide switch at their positions in the case\u003c\/li\u003e\n\u003cli\u003eCarries the row of status LEDs that show through the top of the case\u003c\/li\u003e\n\u003cli\u003eCarries the square ceramic antenna element at its centre\u003c\/li\u003e\n\u003cli\u003ePasses every control signal and LED drive to the rest of the controller through its ribbon and cable connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not carry the control sticks; those are separate modules\u003c\/li\u003e\n\u003cli\u003eIt is not the controller's main board, screen or internal battery\u003c\/li\u003e\n\u003cli\u003eIt does not hold the controller's link to the aircraft; that radio work belongs to other modules such as the DJI Agras T30 OEM RF Module\u003c\/li\u003e\n\u003cli\u003eIt does not cool the controller; that is the DJI Agras T30 OEM Remote Controller Cooling Fan\u003c\/li\u003e\n\u003cli\u003eIt holds no settings, pairing or firmware that you need to transfer from the old board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat division of labour is the key to diagnosing it. The board is a collection of independent controls that share one connection to the rest of the controller. How the faults are grouped tells you where the fault is.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — one dead control is the board, every control dead at once is the connection\u003c\/h2\u003e\n\u003cp\u003eEach button, the knob, the switch and each LED on the board is its own small circuit. They fail one at a time: a worn switch contact, a cracked solder joint under one button, a corroded LED. When one control stops and its neighbours carry on, the fault is on the board, at that control.\u003c\/p\u003e\n\u003cp\u003eEvery one of those circuits, though, reaches the rest of the controller through the same ribbon connector and the same small cable connector. When several unrelated controls all stop at once, or the LEDs go dark together with the buttons, the common factor is not a dozen switches failing on the same day. It is the shared connection: a ribbon not fully seated after the case was last opened, a latch that has lifted, a cable pulled in a drop, or corrosion on the connector pins.\u003c\/p\u003e\n\u003cp\u003eThat is the trap with this part. A controller whose front buttons, knob and LEDs all stopped together after a fall looks like it needs a new button board. Often it needs its ribbon reseated. Replacing the board without reseating the ribbon properly can leave the new board just as dead as the old one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the board itself is at fault:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne button, the knob or the switch fails while the other controls on the board still work\u003c\/li\u003e\n\u003cli\u003eA button that must be pressed hard or at an angle before it registers\u003c\/li\u003e\n\u003cli\u003eA knob that skips, jumps or turns the wrong way\u003c\/li\u003e\n\u003cli\u003eOne LED dark while its neighbours light\u003c\/li\u003e\n\u003cli\u003eGreen or white corrosion around one control or across the board's face\u003c\/li\u003e\n\u003cli\u003eA crack across the board, a lifted component or a torn connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBefore condemning the board, rule out what imitates it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe ribbon and cable connectors\u003c\/strong\u003e — open the latch, reseat the ribbon square and fully home, close the latch, and reseat the small cable connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe button caps\u003c\/strong\u003e — a cap that has swollen, cracked or picked up dirt can stop a healthy switch from being pressed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe knob cap\u003c\/strong\u003e — a cap slipping on the encoder shaft feels exactly like a failed encoder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA setting\u003c\/strong\u003e — some functions only respond in certain modes; confirm the control is meant to do something in the current screen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe rest of the controller\u003c\/strong\u003e — if the sticks, screen or link are also misbehaving, the fault is wider than this board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse the pattern as your test.\u003c\/strong\u003e With the case open and the ribbon freshly reseated, try every control on the board in turn and watch the LEDs. If everything returns, the connection was the fault and the board stays. If most controls work and one does not, the board is the part. If nothing returns with both connectors clean and seated, look at the ribbon cable itself and the board it plugs into before blaming this one.\u003c\/p\u003e\n\u003cp\u003eClear those checks first, while the controller is already open and that information is still cheap.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the button board when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA button, the knob encoder or the slide switch that fails with the ribbon and cable correctly seated and the caps sound\u003c\/li\u003e\n\u003cli\u003eA rotary knob that skips or misreads its direction with a sound cap\u003c\/li\u003e\n\u003cli\u003eA status LED that stays dark while others on the board light\u003c\/li\u003e\n\u003cli\u003eCorrosion on the board that does not clean off, or that has eaten into tracks or pads\u003c\/li\u003e\n\u003cli\u003eA cracked board, broken fixing point, or a component knocked off\u003c\/li\u003e\n\u003cli\u003eA torn or broken ribbon or cable connector on the board itself\u003c\/li\u003e\n\u003cli\u003eA damaged ceramic antenna element or its central pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe ribbon cable and its latch, and the small cable connector\u003c\/li\u003e\n\u003cli\u003eButton caps and the knob cap\u003c\/li\u003e\n\u003cli\u003eThe controller's mode or screen settings\u003c\/li\u003e\n\u003cli\u003eThe DJI Agras T30 OEM RF Module and the controller's link, if the aircraft connection is the complaint\u003c\/li\u003e\n\u003cli\u003eThe DJI Agras T30 OEM Remote Controller Cooling Fan, if faults come only with heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the button board. It is replaced when a control on it fails or the board is damaged, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Remote controller — front-panel controls and status indication\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Populated circuit board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black rectangular circuit board with a raised top edge, copper-ringed fixing holes, push buttons at each end, a row of LEDs along the top edge, a central square ceramic antenna element, a slide switch, a rotary knob encoder and two connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls on the board:\u003c\/strong\u003e Tactile push buttons, two-position slide switch, rotary knob encoder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndicators on the board:\u003c\/strong\u003e Row of small status LEDs along the top edge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAntenna element:\u003c\/strong\u003e Square ceramic element with a central pin, mounted at the centre of the board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black board; tan ceramic antenna element\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e Wide ribbon connector on the lower edge and a small cable connector at the left end\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Inside the remote controller, behind the front-panel button caps, knob and status window\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Screw-fastened inside the controller case; ribbon and cable plugged into the board's connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — caps, cables and screws are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — no calibration or pairing is stored on the board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM remote controller component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the remote controller off fully and disconnect any charger\u003c\/li\u003e\n\u003cli\u003eWork on a clean, dry, static-safe surface and ground yourself before touching the board\u003c\/li\u003e\n\u003cli\u003ePhotograph the inside of the controller once the case is open, including the ribbon and cable routing and how the caps sit over the controls\u003c\/li\u003e\n\u003cli\u003eLay the new board beside the old one and compare outline, button and LED positions, switch, knob and connectors\u003c\/li\u003e\n\u003cli\u003eLay out a tray for screws and keep them grouped by location; controller case screws are not always all the same length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOpen the controller case in the order described in DJI's service documentation for the controller, without forcing clips\u003c\/li\u003e\n\u003cli\u003eLift the ribbon connector latch before drawing out the ribbon, and unplug the small cable by its connector body\u003c\/li\u003e\n\u003cli\u003eUnscrew the board and lift it out square, without bending it against the knob or switch\u003c\/li\u003e\n\u003cli\u003eTransfer nothing between boards except what is plainly separate, such as a knob cap\u003c\/li\u003e\n\u003cli\u003eSeat the new board on its fixing points so every control lines up with its cap and opening before driving any screw home\u003c\/li\u003e\n\u003cli\u003eStart every screw by hand, then snug them evenly; DJI does not publish a torque figure for these fixings\u003c\/li\u003e\n\u003cli\u003ePush the ribbon fully and squarely home before closing its latch, and reseat the small cable until it clicks or sits flush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBefore closing the case fully, power up and press every button, turn the knob both ways, move the switch and watch the LEDs\u003c\/li\u003e\n\u003cli\u003eClose the case and check every cap moves freely and returns without sticking\u003c\/li\u003e\n\u003cli\u003eConfirm the controller links to the aircraft and behaves normally in its usual screens\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Keep the controller out of spray drift and rain where you can, and dry it before storage if it got wet. Do not press buttons with gloves soaked in product. Each time the case is opened for other work, reseat the ribbon to the board carefully and confirm the latch is closed; a half-seated ribbon is the most common reason a sound board appears to fail.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis button board is for operators and technicians whose remote controller has a failed front-panel control, LED or damaged board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators with a button, knob or switch that has stopped responding\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators whose controller took a drop or got wet in the field\u003c\/li\u003e\n\u003cli\u003eAgras service centres repairing controllers at board level instead of replacing the whole unit\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping controllers running across several aircraft\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own aircraft who would rather fix a control than replace a controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery control on the board stopped at once and returns after the ribbon is reseated — keep the board\u003c\/li\u003e\n\u003cli\u003eThe controller is lost, crushed or water-damaged throughout — the DJI Agras T30 OEM Remote Controller is the complete unit\u003c\/li\u003e\n\u003cli\u003eThe controller loses its link to the aircraft — look at the DJI Agras T30 OEM RF Module and the antennas first\u003c\/li\u003e\n\u003cli\u003eThe controller overheats or shuts down in the heat — check the DJI Agras T30 OEM Remote Controller Cooling Fan\u003c\/li\u003e\n\u003cli\u003eA control stick drifts or does not respond — the sticks are separate modules, not this board\u003c\/li\u003e\n\u003cli\u003eOnly a button cap or knob cap is broken — replace the cap\u003c\/li\u003e\n\u003cli\u003eYou fly a T20, T16, T40 or T50 — this board is identified only for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA remote controller with one dead button is still a controller you cannot rely on in the field. The button board is how that is fixed without replacing the whole unit: one board, the controls and status LEDs that go with it, and the case closed again.\u003c\/p\u003e\n\u003cp\u003eThe case for understanding it before replacing it is in the pattern. Controls on this board fail one at a time. Connections fail all at once. A controller whose buttons, knob and LEDs went dead together after a drop or after the case was last opened is, more often than not, a ribbon that needs reseating. A controller with one button that stopped while everything around it works is a board.\u003c\/p\u003e\n\u003cp\u003eGetting that right saves both ways. It stops a sound board being replaced when the ribbon was the fault, and it stops a whole controller being replaced when one board would have done.\u003c\/p\u003e\n\u003cp\u003eThe check costs nothing once the case is open. Reseat the ribbon and cable, try every control, watch the LEDs. If they all return, close it up. If one does not, this is the part that brings it back.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30; DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Remote controller button board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Remote controller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Inside the remote controller, behind the front-panel button caps, knob and status window\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Carries the controller's push buttons, rotary knob, slide switch and status LEDs and passes their signals to the rest of the controller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black populated circuit board with push buttons, LED row, slide switch, rotary knob encoder, central square ceramic antenna element, ribbon and cable connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Controller case, button and knob caps, ribbon and internal cables, sticks, screen, battery, fan, RF module, screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e One control dead with others working points at the board; all controls dead together points at the ribbon or cable connection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Worn or dead push button, skipping knob encoder, dark LED, corrosion, cracked board or torn connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStored settings:\u003c\/strong\u003e None; no pairing or calibration transfers with the board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM remote controller component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 remote controller button board; T30 controller button not working; T10 remote button board; T30 controller knob board; DJI Agras T10\/T30 remote control button board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T30 Remote Controller, not the T30 RF Module, not the T30 Remote Controller Cooling Fan, not a control stick module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10\/T30 remote control button board\u003c\/p\u003e\n\u003cp\u003eT30 remote controller button not working\u003c\/p\u003e\n\u003cp\u003eT30 controller knob not responding\u003c\/p\u003e\n\u003cp\u003eT10 remote controller button board\u003c\/p\u003e\n\u003cp\u003eAgras T30 controller LED board\u003c\/p\u003e\n\u003cp\u003eT30 remote controller circuit board\u003c\/p\u003e\n\u003cp\u003eDJI T30 remote button board replacement\u003c\/p\u003e\n\u003cp\u003eT10 remote control button repair\u003c\/p\u003e\n\u003cp\u003eAgras T30 Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003eAgras T30 remote controller button board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T10 Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Remote Controller Button Board\u003c\/p\u003e\n\u003cp\u003eAgras T10 remote controller button board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 remote controller parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 remote controller parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras remote controller repair parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Remote Controller Button Board Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 remote controller button board?\u003c\/strong\u003e The black circuit board inside the remote controller that carries its front-panel push buttons, a row of status LEDs, a slide switch, a rotary knob encoder and a square ceramic antenna element, joined to the rest of the controller by a ribbon and a small cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10 remote controller. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old board flat with both connectors in frame and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll my buttons and LEDs stopped at once. Do I need this board?\u003c\/strong\u003e Probably not yet. When everything on the board stops together, reseat the ribbon and the small cable first. Controls fail one at a time; connections fail all at once.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly one button stopped working. Is it the board?\u003c\/strong\u003e Usually. Check the button cap first. If the cap is sound and the ribbon is seated, a single dead control with its neighbours working points at the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe knob skips or turns the wrong way. Is that this board?\u003c\/strong\u003e The rotary knob encoder is on this board. Check the knob cap is not slipping on the shaft first; if the cap is tight and the knob still misreads, replace the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with button caps or the knob cap?\u003c\/strong\u003e No. It is the board with its switches, encoder, LEDs and antenna element fitted. Caps sit in the case and are reused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the ribbon cable?\u003c\/strong\u003e No. Reuse your ribbon and cable if they are sound, and reseat them carefully.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill I need to pair or calibrate after fitting it?\u003c\/strong\u003e No settings are stored on this board, so there is nothing to transfer. Check every control and the link to the aircraft before flying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy controller keeps losing the aircraft. Is this the part?\u003c\/strong\u003e Unlikely. Link problems point at the DJI Agras T30 OEM RF Module and the antennas first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the whole remote controller?\u003c\/strong\u003e No. The DJI Agras T30 OEM Remote Controller is the complete unit. This is one board inside it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy controller got wet. Should I replace the board?\u003c\/strong\u003e Open it, dry it and look for corrosion. If corrosion has eaten into tracks or pads, or controls stay dead after cleaning, replace the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e A careful technician can. Work static-safe, photograph the inside before you start, lift the ribbon latch before pulling the ribbon, seat the new board so every control meets its cap, and test every control before closing the case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T20 or T40 controller?\u003c\/strong\u003e It is identified only for the T30 and T10. Do not fit it to other controllers on the strength of a similar-looking board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when a control on it fails with the ribbon seated and the caps sound, or when the board is cracked or corroded.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68085750399296,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68085750432064,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-remote-controller-button-board-1.png?v=1794378300","url":"https:\/\/aresacres.com\/es\/products\/dji-agras-t30-oem-remote-controller-button-board","provider":"Ares Acres","version":"1.0","type":"link"}