{"product_id":"dji-agras-t30-oem-round-ridged-base-bracket","title":"DJI Agras T30 OEM Round Ridged Base Bracket","description":"\u003cp\u003eThe DJI Agras T30 OEM Round Ridged Base Bracket is a single grey frame bracket for the DJI Agras T30 and T10, named in its part designation as the round ridged base bracket. As shown in the product images, it is made of three sections in one piece: a flat rectangular top plate with a raised lip around its edge and a ledge along one side, an angled column that runs down and across from the underside of that plate, and a foot plate at the bottom with two screw holes. The foot plate is where the bracket is fixed; the top plate is the face it presents to what it carries. Because the column is angled, the top plate sits offset from the foot, and the bracket's job depends on the top plate staying square and in the same place relative to the foot. It is a base bracket in the airframe, and its exact installed position is not published for this part, so it is matched by shape against the one you removed. It is identified for the DJI Agras T30 and T10, offered in DJI T30 and DJI T10 variants, and supplied brand new as one bracket. Operators usually reach it while searching for a T30 base bracket, a T30 round ridged bracket, a T10 base bracket, or a cracked or bent bracket found after a hard landing. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10, base bracket position in the airframe\u003c\/li\u003e\n\u003cli\u003eMatched by top plate outline and lip, angled column, foot plate and two-hole pattern against the bracket you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM airframe bracket, brand new, supplied as one bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one bracket. Because its installed position is not published for this part, a photograph settles the match. Photograph the bracket you removed from the side, so the angle of the column shows, and from below, so the two holes in the foot show, and send both to us. We will match it for you, so the right bracket arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Round Ridged Base Bracket, grey, with a flat lipped top plate, an angled column and a two-hole foot plate, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne bracket per order line.\u003c\/strong\u003e The variant is one piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the bracket:\u003c\/strong\u003e the top plate with its lip and side ledge, the angled column and the foot plate with its two screw holes, all as one piece.\u003c\/p\u003e\n\u003cp\u003eNot included: screws, nuts or washers for the foot plate, whatever the bracket carries or supports, and tools. Each of these is a separate part. Nothing is included because it appears near the bracket in a photograph.\u003c\/p\u003e\n\u003cp\u003eIf a screw from the old bracket is missing or damaged, tell us where it sat and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA base bracket is a small part with one job: it holds something at a fixed height and a fixed offset from the place it is screwed down. On this bracket the foot plate is screwed down, the angled column carries the load up and across, and the flat top plate is the face that meets what the bracket supports.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the bracket has five features that identify it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe top plate\u003c\/strong\u003e — a flat rectangular plate forming the upper face of the bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe raised lip\u003c\/strong\u003e — a rim around the edge of the top plate, with small openings visible at one end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe side ledge\u003c\/strong\u003e — a thinner flange that projects from one side of the top plate's underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe angled column\u003c\/strong\u003e — a solid column that runs from under the top plate down and across to the foot, so the top plate sits offset from the foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe foot plate\u003c\/strong\u003e — a flat base at the bottom of the column with two screw holes, where the bracket is fixed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe name in the part designation is round ridged base bracket. The product images show the plates as rectangular, so the name is not a description of the outline you will see on the bench. Match the bracket by its shape: the lipped top plate, the angle of the column and the two-hole foot.\u003c\/p\u003e\n\u003cp\u003eA bracket like this fails in two ways. It can crack or snap, usually where the column meets the foot plate or the top plate, because those corners carry the bending load. Or it can stay whole and bend or twist at the column, so the top plate no longer sits where it should. The first is easy to see. The second is the one that gets missed.\u003c\/p\u003e\n\u003cp\u003eThe bracket carries no wiring and no liquid, and it has no setting. Its job is to hold the top plate at a fixed height, offset and angle from the foot.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe bracket's engineering role is location. It fixes the position of whatever sits on its top plate relative to the structure its foot is screwed to: how high, how far across, and at what angle.\u003c\/p\u003e\n\u003cp\u003eOn the aircraft it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIs screwed down through the two holes in its foot plate\u003c\/li\u003e\n\u003cli\u003eCarries load from the top plate down the angled column to the foot\u003c\/li\u003e\n\u003cli\u003eHolds the top plate at a fixed offset from the foot because of the column's angle\u003c\/li\u003e\n\u003cli\u003ePresents a flat, lipped face to what it supports\u003c\/li\u003e\n\u003cli\u003eCan be replaced on its own once its screws and whatever it supports are released\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not carry or route wiring or hoses\u003c\/li\u003e\n\u003cli\u003eIt does not damp vibration; it is a rigid part\u003c\/li\u003e\n\u003cli\u003eIt holds no setting or calibration\u003c\/li\u003e\n\u003cli\u003eIt does not straighten the structure it is screwed to\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the column is angled, a small twist at the column moves the top plate further than the twist itself. That is why the bracket is judged by where its top plate sits, and not only by whether it is in one piece.\u003c\/p\u003e\n\u003cp\u003eMaterial, dimensions, weight and load rating are not published for this part. The match is made by plate outline, lip, column angle and hole pattern against the bracket you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a bent bracket still holds, and it is still wrong\u003c\/h2\u003e\n\u003cp\u003eAfter a hard landing or a knock, a bracket is checked by pulling on it. It does not move. The screws are tight. Nothing is cracked. It is passed as sound. But the thing it supports now sits a little lower, a little further across, or at a slight angle, and the cause is never traced back to the bracket because the bracket held.\u003c\/p\u003e\n\u003cp\u003eThat is the trap with an angled bracket. Strength and geometry are two different questions. A column that has bent or twisted a few degrees is still strong enough to hold, but it has moved the top plate. Because the column runs at an angle from the foot to the plate, a small bend near the foot shows up as a larger shift at the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms that point at the bracket:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhatever sits on the bracket is out of line with its partner on the other side, or with its usual position\u003c\/li\u003e\n\u003cli\u003eThe top plate is not parallel with the foot plate when sighted from the side\u003c\/li\u003e\n\u003cli\u003eA crack or whitened stress mark where the column meets the foot or the top plate\u003c\/li\u003e\n\u003cli\u003eThe lip on the top plate broken or pushed in\u003c\/li\u003e\n\u003cli\u003eTorn material around one of the two screw holes in the foot\u003c\/li\u003e\n\u003cli\u003eThe bracket rocks on its foot with the screws tight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat proves it:\u003c\/strong\u003e with the battery removed, release what the bracket supports and look at the bracket on its own. Sight along it from the side; the top plate and the foot plate should be parallel. Compare it with its partner on the other side of the aircraft, if there is one; the two should look the same. Lay the new bracket beside the old one on a flat surface; a twist that is hard to see on the aircraft is obvious when both sit side by side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck these first, because they produce similar symptoms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe screws through the foot plate, for looseness or a missing washer\u003c\/li\u003e\n\u003cli\u003eThe structure the foot is screwed to, for a crack or a bend\u003c\/li\u003e\n\u003cli\u003eWhatever the bracket supports, for its own damage\u003c\/li\u003e\n\u003cli\u003eAny fixing between the top plate and what it carries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not explain:\u003c\/strong\u003e a fault in the electronics, the spraying system or the propulsion that is not tied to something being out of position. If nothing has moved, the bracket is not the cause. Settle whether something has moved first, with the bracket on the bench and that information still cheap.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the bracket when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack at the column, especially where it meets the foot plate or the top plate\u003c\/li\u003e\n\u003cli\u003eA column that is bent or twisted, so the top plate is no longer parallel with the foot\u003c\/li\u003e\n\u003cli\u003eA broken or pushed-in lip on the top plate\u003c\/li\u003e\n\u003cli\u003eA torn or elongated screw hole in the foot plate\u003c\/li\u003e\n\u003cli\u003eA bracket that sits differently from its partner on the other side\u003c\/li\u003e\n\u003cli\u003eA bracket lost from the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe foot plate screws and washers\u003c\/li\u003e\n\u003cli\u003eThe structure under the foot plate\u003c\/li\u003e\n\u003cli\u003eWhatever the bracket supports, and its own fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA bracket that holds firm when pulled is not proved sound. Check where its top plate sits, not only whether it moves.\u003c\/p\u003e\n\u003cp\u003eThere is no published service interval for the bracket. It is replaced when it is cracked, bent, twisted, torn at a hole or lost, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Frame — base bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Rigid bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Flat rectangular top plate with a raised lip and a side ledge, an angled column, and a foot plate with two screw holes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixing points:\u003c\/strong\u003e Two screw holes in the foot plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Base bracket in the airframe; exact installed position not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Screwed down through the two holes in the foot plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws, nuts and washers are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the bracket is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM airframe component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft off and remove the battery\u003c\/li\u003e\n\u003cli\u003ePhotograph the bracket in place from the side and from above, so the angle of the column and what sits on the top plate both show\u003c\/li\u003e\n\u003cli\u003eNote which way the column leans and which side the ledge faces\u003c\/li\u003e\n\u003cli\u003eLay the new bracket beside the old one on a flat surface and compare plate, lip, ledge, column angle and holes\u003c\/li\u003e\n\u003cli\u003eLay out a tray for screws and keep them with the bracket they came from\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease whatever the bracket supports, without straining any cable or hose attached to it\u003c\/li\u003e\n\u003cli\u003eRemove the foot plate screws and lift the old bracket away\u003c\/li\u003e\n\u003cli\u003eClean the mounting face and check it for cracks around the screw holes\u003c\/li\u003e\n\u003cli\u003eSet the new bracket with its column leaning the same way and its ledge on the same side as the old one\u003c\/li\u003e\n\u003cli\u003eStart both foot screws by hand, then snug them evenly so the foot sits flat; DJI does not publish a torque figure for these fixings\u003c\/li\u003e\n\u003cli\u003eRefit what the bracket supports and secure its fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSight along the bracket from the side and confirm the top plate is parallel with the foot\u003c\/li\u003e\n\u003cli\u003eCompare it with its partner on the other side, if there is one\u003c\/li\u003e\n\u003cli\u003eCheck that what it supports sits in its usual position and is not strained\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e After any hard landing or knock, look at the bracket from the side as well as giving it a pull. Check that the foot screws are tight when the aircraft is cleaned. Keep the old bracket until the new one is fitted, so the column angle and orientation can be compared directly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis bracket is for operators and technicians whose base bracket is cracked, bent, twisted or lost:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators after a hard landing, a transport knock or an arm strike\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators putting a damaged airframe back to its original geometry\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding frames after impact damage\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking small airframe hardware\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own aircraft who want a part back in its proper position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe bracket only moves because a foot screw is loose — tighten the screw and keep the bracket\u003c\/li\u003e\n\u003cli\u003eThe structure under the bracket is cracked or bent — replace or repair that first, or the new bracket will sit wrong too\u003c\/li\u003e\n\u003cli\u003eWhat the bracket carries is itself damaged — that part is replaced separately\u003c\/li\u003e\n\u003cli\u003eYour bracket has a different column angle or a different hole pattern — send us a photograph so it is matched to the right part\u003c\/li\u003e\n\u003cli\u003eYou fly a T20, T40 or T50 — this bracket is identified only for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA bracket that has bent but not broken is easy to pass. It holds when pulled, its screws are tight, and nothing looks wrong at a glance. What has changed is where its top plate sits, and that change is passed on to whatever the bracket supports.\u003c\/p\u003e\n\u003cp\u003eThe angled column makes this worse, not better. Because the column runs at an angle between foot and plate, a small bend near the foot is carried up and across, and the plate moves further than the bend. A part that is still strong can be out of position by enough to matter.\u003c\/p\u003e\n\u003cp\u003eThat is the case for judging this bracket by geometry, not by strength. Sight it from the side, compare it with its partner, and lay it beside a new one. If the top plate is no longer parallel with the foot, the bracket is the part, however firmly it holds.\u003c\/p\u003e\n\u003cp\u003eIt is also the case for leaving a sound bracket alone. If the plate is square, the foot sits flat and the only movement came from a loose screw, a screwdriver fixes it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30; DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Base bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Frame\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Base bracket in the airframe; exact position not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Holds its top plate at a fixed height, offset and angle from its screwed-down foot\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Grey one-piece bracket: flat lipped top plate with side ledge, angled column, two-hole foot plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Screws, nuts, washers, and whatever the bracket supports\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A bracket that holds firm can still be bent; judge it by whether the top plate is parallel with the foot\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Crack at the column ends, bent or twisted column, broken lip, torn screw hole, lost bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNaming note:\u003c\/strong\u003e Named round ridged base bracket in its part designation; matched by shape, not by the name\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM airframe component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 base bracket; T30 round ridged bracket; T10 base bracket; DJI T30 frame bracket; Agras T30 mounting bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T10 Frame Support Bracket, not the T30 Flow Meter Bracket, not a landing gear adapter\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003eDJI T30 base bracket\u003c\/p\u003e\n\u003cp\u003eT30 round ridged bracket\u003c\/p\u003e\n\u003cp\u003eT10 base bracket\u003c\/p\u003e\n\u003cp\u003eAgras T30 base bracket replacement\u003c\/p\u003e\n\u003cp\u003eT30 bracket bent after hard landing\u003c\/p\u003e\n\u003cp\u003eT30 frame bracket cracked\u003c\/p\u003e\n\u003cp\u003eDJI T30 angled bracket\u003c\/p\u003e\n\u003cp\u003eDJI T10 frame base bracket\u003c\/p\u003e\n\u003cp\u003eAgras T30 Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003eAgras T30 round ridged base bracket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T10 Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Round Ridged Base Bracket\u003c\/p\u003e\n\u003cp\u003eAgras T10 round ridged base bracket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 frame parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 frame parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras airframe repair parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Round Ridged Base Bracket Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 round ridged base bracket?\u003c\/strong\u003e A one-piece grey bracket for the T30 and T10 with a flat lipped top plate, an angled column and a foot plate with two screw holes. It holds its top plate at a fixed height and offset from where its foot is screwed down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it called round ridged when the plates look rectangular?\u003c\/strong\u003e Round ridged base bracket is the name in its part designation. Match it by shape: the lipped top plate, the angle of the column and the two-hole foot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere exactly does it mount?\u003c\/strong\u003e It is a base bracket in the airframe; its exact installed position is not published for this part. Photograph the one you removed from the side and from below and send it to us, and we will match it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy bracket is not cracked and it does not move. Can it still be bad?\u003c\/strong\u003e Yes. A bent or twisted column still holds firm. Sight the bracket from the side; if the top plate is not parallel with the foot, it has moved what it supports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check it for a bend?\u003c\/strong\u003e Take it off, lay it beside the new one on a flat surface and compare. Or compare it on the aircraft with its partner on the other side, if there is one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bend it back?\u003c\/strong\u003e Do not rely on that. A bracket that has been bent and straightened can crack later at the same place. Replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include screws?\u003c\/strong\u003e No. It is the bracket alone. Reuse the original screws and washers if they are sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one bracket or a pair?\u003c\/strong\u003e One bracket per order line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T20 or T40?\u003c\/strong\u003e It is identified only for the T30 and T10.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T10 frame support bracket?\u003c\/strong\u003e No. The T10 Frame Support Bracket is a different part. Match by shape against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, for most operators. Release what it supports, remove the two foot screws, set the new bracket with its column leaning the same way, snug the screws evenly and refit what it carries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually damages it?\u003c\/strong\u003e Hard landings, transport knocks and impacts that load the column. Cracks start where the column meets the foot or the top plate; bends start in the column itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is cracked, bent, twisted, torn at a hole or lost.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086041182528,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68086041215296,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-round-ridged-base-bracket-1.png?v=1794379755","url":"https:\/\/aresacres.com\/es\/products\/dji-agras-t30-oem-round-ridged-base-bracket","provider":"Ares Acres","version":"1.0","type":"link"}