{"product_id":"dji-agras-t30-oem-spreading-disc-spacer-gasket","title":"DJI Agras T30 OEM Spreading Disc Spacer Gasket","description":"\u003cp\u003eThe DJI Agras T30 OEM Spreading Disc Spacer Gasket is a single flat black round gasket from the spreading system of the DJI Agras T30, T10, T40 and T20P, the spacer that sits at the spreading disc in the granular spreader. As shown in the product images, it is a thin, flat disc with one round hole at its centre and four smaller bolt holes set in a square pattern around that centre hole. It is a spacer and a gasket in one: it fills a set gap at the spreading disc and gives the joint there a flat, even face to clamp against. It belongs to the spreading system, not to the spraying, power or flight-control systems, and it is identified for the DJI Agras T30, T10, T40 and T20P, offered in a variant for each. It is supplied brand new as one gasket. Operators usually reach it while searching for a T30 spreader disc gasket, a spreading disc spacer, a T40 spreader spacer gasket, a T20P spreading disc washer, or a missing gasket found when the spreading disc was taken apart for cleaning. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ T10 \/ T40 \/ T20P Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30, T10, T40 and T20P, spreading disc spacer position\u003c\/li\u003e\n\u003cli\u003eMatched by outline, centre hole and the four-hole bolt pattern against the gasket you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spreading-system component, brand new, supplied as one gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one gasket, and the four variants are the four aircraft it is identified for. Pick the variant for the aircraft you fly. If you want the match confirmed, lay the old gasket flat next to a ruler, photograph it face-on and edge-on, and send both pictures to us. We will match it for you, so the right gasket arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Spreading Disc Spacer Gasket, flat, black, round, with a centre hole and four bolt holes, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne gasket per order line.\u003c\/strong\u003e The variant is a single gasket, not a pack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the gasket:\u003c\/strong\u003e the flat round body, the centre hole and the four bolt holes, all as one piece.\u003c\/p\u003e\n\u003cp\u003eNot included: the bolts or screws that pass through the four holes, washers, the spreading disc and its main body, the spreading motor, the hopper, the box cover and any tools. Each of these is a separate part.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the gasket on the aircraft. If a bolt from the old joint is missing or damaged, tell us where it sat and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA spacer gasket is a small part that does two jobs at once. As a spacer, it fills a set gap, so the parts on either side of it sit at a fixed distance from each other. As a gasket, it gives the joint a flat, even face, so the clamping load from the bolts is spread across the whole joint instead of landing on a few high spots.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the gasket has four features that identify it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe round outline\u003c\/strong\u003e — a flat disc, black, with a clean round edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe centre hole\u003c\/strong\u003e — one round hole at the middle of the disc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe four bolt holes\u003c\/strong\u003e — four smaller round holes set in a square pattern around the centre hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe flat faces\u003c\/strong\u003e — both faces plain and flat, with no raised bead, rib or groove visible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe name in the part designation is spreading disc spacer gasket, and it is identified across four aircraft: the T30, T10, T40 and T20P. One gasket shape serving several spreading systems is not unusual for a flat spacer, because it only has to match a bolt pattern and a gap, not the shape of a whole assembly.\u003c\/p\u003e\n\u003cp\u003eA gasket like this rarely breaks in two. It fails in quieter ways: it is lost when the spreading disc is stripped for cleaning, it tears at a bolt hole when a bolt is over-tightened or pulled out at an angle, or it gives up some of its thickness under repeated clamping and no longer fills the gap it was made to fill. The first two are easy to see. The third is the one that gets missed.\u003c\/p\u003e\n\u003cp\u003eThe gasket carries no wiring and has no setting. Its job is to fill its gap and give the joint an even face.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe gasket's engineering role is distance and evenness. It sets how far apart the two faces of its joint sit, and it makes the bolts clamp that joint evenly.\u003c\/p\u003e\n\u003cp\u003eOn the aircraft it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSits at the spreading disc, in the spacer position named in its part designation\u003c\/li\u003e\n\u003cli\u003eIs clamped between two faces by bolts passing through its four holes\u003c\/li\u003e\n\u003cli\u003eFills a set gap, so the parts on either side sit at a fixed distance\u003c\/li\u003e\n\u003cli\u003eSpreads the bolt load across the joint, so the joint is clamped evenly\u003c\/li\u003e\n\u003cli\u003eLeaves a clear centre opening through the middle of the joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not spin the disc; the spreading motor does that\u003c\/li\u003e\n\u003cli\u003eIt does not throw or meter granules; the disc and the spreading system do that\u003c\/li\u003e\n\u003cli\u003eIt does not hold the bolts on its own; the bolts and their threads do\u003c\/li\u003e\n\u003cli\u003eIt does not cure a bent, cracked or worn spreading disc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMaterial, thickness, outside diameter and hole sizes are not published for this part. The match is made by outline, centre hole and four-hole pattern against the gasket you removed, and its thickness is judged against a new one side by side.\u003c\/p\u003e\n\u003cp\u003eWhether the gasket is also meant to keep fine dust out of the joint is not published for this part. It is matched as a spacer and a gasket, and nothing more is claimed for it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a thinned gasket looks perfect face-on, so look at it edge-on\u003c\/h2\u003e\n\u003cp\u003eA spacer gasket that has been clamped for many hours can look perfect when it is held up and looked at face-on. The outline is round, the holes are clean, nothing is torn. It goes back in. What the face-on view cannot show is thickness. A gasket that has taken a set under its bolts is thinner than it was, and a spacer that is thinner than it was no longer fills its gap.\u003c\/p\u003e\n\u003cp\u003eThat is the invisible failure on this part. It is not a crack you can see. It is a dimension that has quietly changed. The joint can still be tight, because the bolts pull the faces together, but the distance the gasket was there to hold is shorter, and whatever sits on the far side of it sits closer than it should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to check it properly:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTake the gasket out and look at it edge-on, not face-on\u003c\/li\u003e\n\u003cli\u003eLay it beside a new gasket on a flat surface and compare the two edges\u003c\/li\u003e\n\u003cli\u003eLook for a gasket that is thinner around its bolt holes than at its outer edge\u003c\/li\u003e\n\u003cli\u003eLook for shiny, flattened rings around the bolt holes where the bolt heads or faces bore down\u003c\/li\u003e\n\u003cli\u003eRun a fingernail across the face; a ridge or step means it has been pressed unevenly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms that point at the gasket:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA gasket missing from the joint after the spreading disc was cleaned or reassembled\u003c\/li\u003e\n\u003cli\u003eA tear running out from one of the four bolt holes\u003c\/li\u003e\n\u003cli\u003eA gasket that is visibly thinner than a new one when the two are laid side by side\u003c\/li\u003e\n\u003cli\u003eBolts at the spreading disc that will not stay snug after reassembly\u003c\/li\u003e\n\u003cli\u003eA joint at the spreading disc that sits differently from how it sat before the last strip-down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCheck these first, because they produce similar symptoms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe bolts and their threads, for stripping, stretch or a missing washer\u003c\/li\u003e\n\u003cli\u003eThe spreading disc main body, for cracks, wear or a rough hub\u003c\/li\u003e\n\u003cli\u003eThe mating faces either side of the gasket, for granule residue packed into the joint\u003c\/li\u003e\n\u003cli\u003eThe spreading motor mount, if the whole disc runs out of true\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not explain:\u003c\/strong\u003e a spreading error, a disc that will not spin, a metering fault or a weighing reading that is wrong. Those sit in the motor, the signal cable, the weighing assembly or the settings. A gasket fills a gap; it does not drive or measure anything.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the gasket when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe gasket is missing from the joint\u003c\/li\u003e\n\u003cli\u003eA tear at any of the four bolt holes or at the centre hole\u003c\/li\u003e\n\u003cli\u003eThe gasket is visibly thinner than a new one when compared edge-on\u003c\/li\u003e\n\u003cli\u003eFlattened, shiny rings or a step pressed into the face around the bolt holes\u003c\/li\u003e\n\u003cli\u003eThe gasket was damaged or creased when the joint was taken apart\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe bolts, threads and washers at the joint\u003c\/li\u003e\n\u003cli\u003eThe spreading disc main body\u003c\/li\u003e\n\u003cli\u003eThe mating faces either side of the gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA gasket that looks perfect face-on is not proved sound. Look at its edge beside a new one.\u003c\/p\u003e\n\u003cp\u003eThere is no published service interval for the gasket. A practical rule is to fit a new one whenever the joint is taken apart and the old one is torn, thinned or lost.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T10, T40 and T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30, T10, T40 and T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spreading — spreading disc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Flat spacer gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Flat round disc with one centre hole and four bolt holes in a square pattern\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHoles:\u003c\/strong\u003e Five: one centre hole and four bolt holes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutside diameter:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHole sizes:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Spacer position at the spreading disc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Clamped between two faces by bolts through its four holes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — bolts and washers are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the gasket is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spreading-system component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft off and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the hopper and clear granules from around the spreading disc\u003c\/li\u003e\n\u003cli\u003ePhotograph the spreading disc and its joint before anything is removed, so the order of parts is on record\u003c\/li\u003e\n\u003cli\u003eLay the new gasket beside the old one and compare outline, centre hole and the four-hole pattern\u003c\/li\u003e\n\u003cli\u003eLay out a tray for the bolts and washers and keep them in the order they came out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the bolts through the joint evenly, a little at a time, so no single bolt carries the whole load\u003c\/li\u003e\n\u003cli\u003eLift the parts apart and remove the old gasket; do not lever it off with a blade that can score the faces\u003c\/li\u003e\n\u003cli\u003eBrush or wipe both mating faces clean of granule dust and residue\u003c\/li\u003e\n\u003cli\u003eSet the new gasket with its four holes lined up with the bolt holes and its centre hole clear\u003c\/li\u003e\n\u003cli\u003eStart every bolt by hand first, then snug them in a cross pattern so the gasket is clamped evenly; DJI does not publish a torque figure for this joint\u003c\/li\u003e\n\u003cli\u003eDo not over-tighten; a gasket crushed at one bolt is thinner at that bolt and the joint sits unevenly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurn the spreading disc by hand and check it moves freely and does not rub\u003c\/li\u003e\n\u003cli\u003eCheck the edge of the gasket all the way round; it should sit flat with no part pushed out\u003c\/li\u003e\n\u003cli\u003eRun the spreading system briefly with the hopper empty and listen for rubbing or knocking\u003c\/li\u003e\n\u003cli\u003eRecheck the bolts after the first job\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Granular products leave fine dust in every joint of a spreader. When the spreading disc is cleaned, check that the gasket is still in place and still flat, and look at its edge beside a spare. Keeping one spare gasket with the aircraft means a gasket lost or torn during cleaning is replaced on the spot.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis gasket is for operators and technicians whose spreading disc spacer gasket is missing, torn or thinned:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 and T10 operators who run the granular spreading system\u003c\/li\u003e\n\u003cli\u003eDJI Agras T40 and T20P operators who strip and clean the spreading disc between products\u003c\/li\u003e\n\u003cli\u003eSeeding and fertiliser applicators who take the spreader apart on the job\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding spreading systems\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking small spreading-system hardware for mixed T30, T10, T40 and T20P fleets\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own aircraft who clean and reassemble the spreader themselves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe spreading disc itself is cracked, chipped or rough at its hub — on the T30 and T10 that is the DJI Agras T30 OEM Spreading Disc Main Body, a separate part\u003c\/li\u003e\n\u003cli\u003eThe whole spreader is damaged — the DJI Agras T30 OEM Spreading System is the complete system\u003c\/li\u003e\n\u003cli\u003eThe spreader box lid is cracked or lost — that is the T30 Spreading System Box Cover\u003c\/li\u003e\n\u003cli\u003eThe disc does not spin or the spreader reports an error — check the motor, the signal cable and the settings first\u003c\/li\u003e\n\u003cli\u003eOnly a bolt is stripped — replace the bolt and keep a sound gasket\u003c\/li\u003e\n\u003cli\u003eYou fly a T16, T20, T25 or T50 — this gasket is identified only for the T30, T10, T40 and T20P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eMost worn parts show their wear. This one hides it. A spacer gasket is judged by its thickness, and thickness is the one thing a face-on glance cannot see.\u003c\/p\u003e\n\u003cp\u003eThat matters because a spacer exists to hold a distance. When it thins under its bolts, the joint still feels tight, because the bolts close the faces together. What has gone is the gap, and the parts beyond the gasket now sit closer than they were set to sit.\u003c\/p\u003e\n\u003cp\u003eThat is the case for looking at this gasket edge-on, beside a new one, every time the spreading disc comes apart. If it is thinner, torn at a hole, pressed into a step or missing, it is the part. It is a small part, and a new one restores the gap the joint was built around.\u003c\/p\u003e\n\u003cp\u003eIt is also the case for not blaming it for everything. A gasket fills a gap and evens a clamp. It does not spin the disc, meter the granules or report errors. If the spreader misbehaves with a sound, flat gasket in place, the cause is elsewhere.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T10; DJI Agras T40; DJI Agras T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30; DJI Agras T10; DJI Agras T40; DJI Agras T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30, T10, T40 and T20P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Spreading disc spacer gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spreading\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Spacer position at the spreading disc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Fills a set gap at the spreading disc and spreads the bolt clamp evenly across the joint\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Flat black round disc with a centre hole and four bolt holes in a square pattern\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Bolts, washers, spreading disc main body, motor, hopper, box cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Judge it edge-on beside a new gasket; thinning does not show face-on\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Lost during cleaning, torn at a bolt hole, thinned or stepped under clamping\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spreading-system component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 spreader disc gasket; spreading disc spacer; T40 spreader spacer gasket; T20P spreading disc washer; T10 spreader gasket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T30 Spreading Disc Main Body, not the T30 Spreading System, not the T30 Spreading System Box Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras spreading disc spacer gasket\u003c\/p\u003e\n\u003cp\u003eT30 spreader disc gasket\u003c\/p\u003e\n\u003cp\u003eT40 spreader spacer gasket\u003c\/p\u003e\n\u003cp\u003eT20P spreading disc gasket\u003c\/p\u003e\n\u003cp\u003eAgras spreading disc spacer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T30 Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T30 spreading disc spacer gasket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T10 Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T10 spreading disc spacer gasket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T40 Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 OEM Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T40 spreading disc spacer gasket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T20P Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P OEM Spreading Disc Spacer Gasket\u003c\/p\u003e\n\u003cp\u003eAgras T20P spreading disc spacer gasket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20P replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras spreading system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Spreading Disc Spacer Gasket Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras spreading disc spacer gasket?\u003c\/strong\u003e A flat black round gasket with a centre hole and four bolt holes. It sits at the spreading disc, fills a set gap and gives the joint an even face to clamp against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30, T10, T40 and T20P. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the gasket the same for all four aircraft?\u003c\/strong\u003e It is identified for all four, and each has its own variant so the order records the aircraft it is for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one gasket or a pack?\u003c\/strong\u003e One gasket per order line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy old gasket looks fine. Why replace it?\u003c\/strong\u003e Because thinning does not show face-on. Lay it beside a new one and look at the edges. If it is thinner, stepped around the holes or torn, replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI lost the gasket while cleaning the spreader. Can I run without it?\u003c\/strong\u003e Do not. The gasket is a spacer; without it the parts either side of the joint sit closer than they were set to sit, and the bolts clamp an uneven joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the bolts?\u003c\/strong\u003e No. It is the gasket alone. Reuse the original bolts and washers if their threads and heads are sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut a gasket from sheet material instead?\u003c\/strong\u003e Not reliably. Its thickness, material and hole sizes are not published for this part, so a home-made gasket cannot be shown to match the gap. Use the matched part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the spreading disc main body?\u003c\/strong\u003e No. The DJI Agras T30 OEM Spreading Disc Main Body is the round disc body itself, identified for the T30 and T10. The gasket is the flat spacer at the disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new gasket fix a spreading error?\u003c\/strong\u003e Not on its own. Errors usually come from the motor, the signal cable, the weighing assembly or the settings. The gasket fills a gap; it does not drive or measure anything.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, for most operators. Empty the hopper, remove the bolts evenly, clean both faces, set the new gasket with its holes lined up, then snug the bolts in a cross pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight should the bolts be?\u003c\/strong\u003e DJI does not publish a torque figure for this joint. Snug them evenly in a cross pattern and do not over-tighten, so the gasket is not crushed at one bolt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T50 or T25?\u003c\/strong\u003e It is identified only for the T30, T10, T40 and T20P.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is lost, torn, thinned or stepped, and check it whenever the spreading disc comes apart.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086247686464,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68086247719232,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"DJI T40","offer_id":68086247752000,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"DJI T20P","offer_id":68086247784768,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-spreading-disc-spacer-gasket-1.png?v=1794382431","url":"https:\/\/aresacres.com\/es\/products\/dji-agras-t30-oem-spreading-disc-spacer-gasket","provider":"Ares Acres","version":"1.0","type":"link"}