{"product_id":"dji-agras-t70p-oem-front-radar-signal-cable-yc-xc-xx001467-04","title":"DJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04)","description":"\u003cp\u003e\u003cstrong\u003eDJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04) | Navigation \/ Radar Wiring | Professional DJI Agras repair reference\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eComponent overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04)\u003c\/strong\u003e is a front radar \/ obstacle-sensing signal harness used in the Navigation \/ Radar Wiring system of the DJI Agras T70P platform. This harness is a dedicated signal path for the front radar \/ obstacle-sensing assembly. It is not a generic wire: connector keying, cable length, mounting tabs, shielding, and routing determine whether it fits the aircraft correctly.\u003c\/p\u003e\n\u003cp\u003eRadar faults after an impact can originate in the sensor, mounting bracket, cable, connector, or upstream electronics. A damaged signal harness is one of the lowest-cost items in that chain and should be inspected before replacing an expensive radar module.\u003c\/p\u003e\n\u003cp\u003eThis listing is structured as an OEM replacement reference based on the supplier source and current Ares Acres catalog context.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI material number \/ supplier-listed identifier:\u003c\/strong\u003e YC.XC.XX001467.04. Confirm the printed identifier on the original component before installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility and fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70P\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary catalog model:\u003c\/strong\u003e DJI Agras T70P.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional storefront variant:\u003c\/strong\u003e DJI Agras T70. The product title is intentionally standardized around T70P, while the T70 fitment is retained as a selectable compatibility variant where the supplier source and current catalog mapping support it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional compatibility note:\u003c\/strong\u003e The supplier source also references DJI Agras T100 compatibility. This T70P-centered listing retains T70P and T70 storefront variants while recording T100 as a cross-compatibility reference that should be confirmed against the original cable and aircraft revision.\u003c\/p\u003e\n\u003cp\u003eDo not rely on appearance alone. Before installation, compare the removed component for connector keying, cable length, mounting points, housing geometry, printed labels, directional markings, and aircraft revision. DJI may revise internal parts during a production run without changing the external aircraft model name.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\n\u003cp\u003eThe cable transfers radar signal data between the front sensing hardware and the aircraft electronics system.\u003c\/p\u003e\n\u003cp\u003eReliable connector contact and undamaged conductors are required for stable communication. A cable can fail intermittently when vibration or steering of the harness changes the contact condition.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarries front radar signal communication\u003c\/li\u003e\n\u003cli\u003eMaintains the intended connector path between sensing hardware and aircraft electronics\u003c\/li\u003e\n\u003cli\u003eProvides strain-relieved routing through the front sensing area\u003c\/li\u003e\n\u003cli\u003eAllows cable-level repair without radar-module replacement\u003c\/li\u003e\n\u003cli\u003eSupports obstacle-sensing system service and fault isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy operators replace this component\u003c\/h2\u003e\n\u003cp\u003eReplace the cable when physical inspection or electrical diagnosis isolates the fault to the harness or connectors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut or abraded cable jacket\u003c\/li\u003e\n\u003cli\u003eBroken connector latch\u003c\/li\u003e\n\u003cli\u003eBent, corroded, or recessed pins\u003c\/li\u003e\n\u003cli\u003eHarness damaged in a front impact\u003c\/li\u003e\n\u003cli\u003eIntermittent radar communication when the cable is moved\u003c\/li\u003e\n\u003cli\u003eCable pinched during shell or bracket service\u003c\/li\u003e\n\u003cli\u003eMoisture or chemical contamination at a connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA failed adjacent component can create similar symptoms. Confirm the fault path before replacing high-value electronics, sensors, camera assemblies, or propulsion hardware.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDiagnostic context\u003c\/h2\u003e\n\u003cp\u003eStart with the cable whenever the radar problem follows an impact, shell repair, or prior service in the front sensing area. Inspect the connector on both ends before ordering a radar module.\u003c\/p\u003e\n\u003cp\u003eA cable fault can be intermittent. Wiggle-related changes in the fault, visible conductor damage, or connector movement are strong reasons to investigate the harness further.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect both connector housings and locking features\u003c\/li\u003e\n\u003cli\u003eCompare cable routing with a known-good aircraft\u003c\/li\u003e\n\u003cli\u003eCheck for abrasion at clips and frame pass-throughs\u003c\/li\u003e\n\u003cli\u003eInspect the front radar bracket for impact deformation\u003c\/li\u003e\n\u003cli\u003eCheck the radar module connector itself for damage\u003c\/li\u003e\n\u003cli\u003eUse appropriate continuity \/ signal-path testing where supported by the service procedure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor intermittent faults, reproduce the symptom with the aircraft stationary and powered only when safe to do so. Inspect the connector and harness path before assuming the module itself has failed. Record fault codes, controller messages, physical damage, and the state in which the fault appears.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation and service notes\u003c\/h2\u003e\n\u003cp\u003ePower the aircraft down completely and remove flight batteries before service. Photograph the original installation before disconnecting anything. Preserve routing, shielding, fastener locations, gaskets, clips, cable strain relief, and component orientation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoute the cable exactly along the original path\u003c\/li\u003e\n\u003cli\u003eEngage all clips and strain-relief points\u003c\/li\u003e\n\u003cli\u003eDo not stretch the harness between connectors\u003c\/li\u003e\n\u003cli\u003eKeep the cable clear of sharp frame edges and moving assemblies\u003c\/li\u003e\n\u003cli\u003eComplete obstacle-sensing functional checks after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installation, verify that all connectors are fully seated, locking tabs are engaged, no cable is pinched, the component is mechanically secure, and no moving assembly is obstructed. Any repair involving flight electronics, sensing, navigation, propulsion, or camera systems should be followed by the relevant DJI inspection, calibration, firmware, and functional checks before returning the aircraft to service.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications and catalog identity\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft family:\u003c\/strong\u003e DJI Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary model:\u003c\/strong\u003e DJI Agras T70P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible variant:\u003c\/strong\u003e DJI Agras T70\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Navigation \/ Radar Wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Front Radar Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled area:\u003c\/strong\u003e front radar \/ obstacle-sensing wiring path\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e carries signal communication between the front radar assembly and the aircraft wiring \/ electronics system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New replacement component unless the selected supplier option states otherwise\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage quantity:\u003c\/strong\u003e 1 front radar signal cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment verification:\u003c\/strong\u003e Compare original component, mounting geometry, connectors, printed identifiers, and aircraft revision before installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePackage includes\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e1 × front radar signal cable, supplier-listed identifier YC.XC.XX001467.04\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eUnless the product title or selected variant explicitly states otherwise, the aircraft, batteries, surrounding assemblies, tools, unrelated wiring, fasteners, and other context items are not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eField-use importance\u003c\/h2\u003e\n\u003cp\u003eRadar modules are high-value components. Verifying the harness first is one of the most efficient ways to avoid replacing a good sensor because of a low-cost wiring fault.\u003c\/p\u003e\n\u003cp\u003eFor a fleet, stocking signal cables alongside brackets and radar components shortens diagnosis and repair time after front-end impact or teardown.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRestores a damaged front radar signal path\u003c\/li\u003e\n\u003cli\u003eProtects against unnecessary radar-module replacement\u003c\/li\u003e\n\u003cli\u003eVerified supplier-listed identifier improves part matching\u003c\/li\u003e\n\u003cli\u003eUseful critical spare for obstacle-sensing repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon repair scenarios\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront impact damages the radar cable\u003c\/li\u003e\n\u003cli\u003eConnector latch breaks during sensor service\u003c\/li\u003e\n\u003cli\u003eRadar warning appears only when the harness is moved\u003c\/li\u003e\n\u003cli\u003eShell repair pinches or abrades the signal cable\u003c\/li\u003e\n\u003cli\u003eTechnician isolates a communication fault to the harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor commercial spray operations, the objective is not merely to replace a visible part. The objective is to return the complete subsystem to predictable operation, protect adjacent components from secondary damage, and minimize repeated teardown during a narrow application window.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment verification workflow\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConfirm the aircraft model and selected T70P or T70 variant.\u003c\/li\u003e\n\u003cli\u003eIdentify the subsystem and exact installed position of the failed component.\u003c\/li\u003e\n\u003cli\u003eCompare the original part against the listing image and mounting geometry.\u003c\/li\u003e\n\u003cli\u003eCheck every visible DJI material number, QR label, revision mark, connector type, and directional marking.\u003c\/li\u003e\n\u003cli\u003eInspect adjacent cables, brackets, seals, fasteners, and mounting points for secondary damage.\u003c\/li\u003e\n\u003cli\u003eIf the part is electrical, isolate wiring faults before condemning the module.\u003c\/li\u003e\n\u003cli\u003eIf the part affects sensing, camera, navigation, or flight control, complete the relevant post-repair calibration and system check.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch2\u003eRelated DJI Agras T70P service paths\u003c\/h2\u003e\u003cp\u003eUse these internal paths to move from diagnosis to adjacent assemblies without starting over:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/es\/collections\/dji-t70-parts\"\u003eDJI Agras T70P Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/collections\/dji-parts\"\u003eDJI Agras Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/pages\/dji-agras-parts-finder\"\u003eDJI Agras Parts Finder\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/dji-agras-t70-t70p-oem-gimbal-camera-lens\"\u003eT70P Gimbal Camera Lens\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/dji-agras-t70-t70p-oem-gimbal-camera-assembly-1\"\u003eT70P Gimbal Camera Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/dji-agras-t70-t70p-oem-rear-vision-radar-bracket-1\"\u003eT70P Rear Vision Radar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/dji-agras-t70-t70p-main-board-1\"\u003eT70P Main Board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/dji-agras-t70-t70p-oem-propeller-adapter-holder-quick-release-mount-1\"\u003eT70P Propeller Adapter Holder\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/es\/products\/dji-agras-t70-t70p-fpv-2-pin-plug-conversion-cable-1\"\u003eT70P FPV 2-Pin Conversion Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eAI index — entity and fitment reference\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEntity:\u003c\/strong\u003e DJI Agras T70P OEM Front Radar Signal Cable (YC.XC.XX001467.04)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDefinition:\u003c\/strong\u003e A front radar signal harness for DJI Agras T70P\/T70 aircraft, supplier-listed as YC.XC.XX001467.04, carrying communication between the front obstacle-sensing radar and aircraft electronics. Supplier context also references T100 compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Agras T70P, DJI Agras T70\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e OEM replacement component \/ service part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary buyer:\u003c\/strong\u003e DJI Agras operators, agricultural drone technicians, repair shops, fleet managers, and commercial spraying organizations maintaining T70P\/T70 aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSearch intent:\u003c\/strong\u003e component identification, repair replacement, compatibility verification, fleet maintenance, and hard-to-find Agras service part sourcing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSEO and technical search terms\u003c\/h2\u003e\n\u003cp\u003eYC.XC.XX001467.04 • DJI Agras T70P front radar signal cable • DJI T70 radar cable • Agras T70P obstacle sensing harness • T70P front radar wiring • DJI agricultural drone radar cable\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat material number is shown?\u003c\/strong\u003e\u003cbr\u003eThe supplier-listed identifier is YC.XC.XX001467.04.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this also fit the T100?\u003c\/strong\u003e\u003cbr\u003eThe supplier source references T100 compatibility, but confirm the original cable, connector layout, and aircraft revision before using this T70P-centered listing for a T100 repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace the radar module first?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Inspect the cable, connectors, mounting bracket, and power \/ communication path before replacing the radar module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the original supplier screenshot attached?\u003c\/strong\u003e\u003cbr\u003eYes. The current product media includes the original source screenshot for identification.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAres Acres DJI Agras support\u003c\/h2\u003e\n\u003cp\u003eAres Acres maintains a growing catalog of DJI Agras aircraft, spraying, propulsion, sensing, power, camera, structural, and wiring components. For difficult identification cases, use the \u003ca href=\"\/es\/pages\/dji-agras-parts-finder\"\u003eDJI Agras Parts Finder\u003c\/a\u003e or send a clear photo of the removed component together with the aircraft model and every visible printed identifier.\u003c\/p\u003e\n\u003cp\u003eBrowse the \u003ca href=\"\/es\/collections\/dji-t70-parts\"\u003eDJI T70P \/ T70 parts collection\u003c\/a\u003e for additional repair components and the broader \u003ca href=\"\/es\/collections\/dji-parts\"\u003eDJI parts catalog\u003c\/a\u003e for related systems.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"T70P","offer_id":53182873207104,"sku":"YC.XC.XX001467.04","price":64.99,"currency_code":"USD","in_stock":true},{"title":"T70","offer_id":53182880383296,"sku":"YC.XC.XX001467.04","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t70p-oem-front-radar-signal-cable-yc-xc-xx001467-04-1.png?v=1794514822","url":"https:\/\/aresacres.com\/es\/products\/dji-agras-t70p-oem-front-radar-signal-cable-yc-xc-xx001467-04","provider":"Ares Acres","version":"1.0","type":"link"}