{"product_id":"dji-talos-t60x-oem-connector-rubber-stopper","title":"DJI Talos T60X OEM Connector Rubber Stopper","description":"\u003cp\u003eThe DJI Talos T60X OEM Connector Rubber Stopper is the tethered black rubber stopper that closes an open connector on the Talos T60X, supplied in two types: Female and Male. Each is a flat rubber strap with a stopper at one end and a mounting tab at the other. In the product images the Female stopper ends in a square plug head with a ribbed collar and a moulded multi-cavity face, and the Male stopper ends in a rounded, hollow cap. It is a wiring-system seal: it carries no current, but while a connector is open it keeps spray residue, dust and wash water off the contacts. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X connector stopper, connector dust cap or rubber plug after the old one has torn off its strap, been lost in the field, or split so it no longer seals.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X, in Female and Male types\u003c\/li\u003e\n\u003cli\u003eMatched by stopper end, strap and mounting tab against the stopper you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM wiring-system rubber stopper, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. If the stopper is lost, a photograph of the open connector it closed tells us which type you need.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Connector Rubber Stopper, in the type you select (Female or Male)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne stopper per line.\u003c\/strong\u003e Each type is a single stopper. Female and Male are two different parts, not a matched pair, and selecting one does not include the other.\u003c\/p\u003e\n\u003cp\u003eNot included: the connector the stopper closes, the cable it is on, the Cable Rubber Stopper, the Sealing Rings and any fixings. Those are separate parts or stay with the aircraft.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. Each photograph shows one stopper of one type.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA connector that is open on a spray aircraft is a connector collecting residue. Whenever a module is removed, a lead is unplugged for transport or a payload is changed, the contacts it leaves exposed sit in the same spray drift, dust and wash water as the rest of the airframe. The connector rubber stopper closes that opening until the connector is used again.\u003c\/p\u003e\n\u003cp\u003eIt does that while staying attached to the aircraft. Both types are built the same way: a flat black rubber strap, a stopper at one end and a mounting tab at the other. The tab anchors the strap, so when the stopper is pulled out of its connector it hangs where it was used instead of going into a pocket or onto the ground.\u003c\/p\u003e\n\u003cp\u003eThe two types differ at the stopper end, and that difference is the whole reason there are two:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale\u003c\/strong\u003e — the product images show a square plug head with rounded corners, a ribbed collar of stacked rubber rings behind it, and a moulded face with several cavities. Its far end is a T-shaped crossbar with a slotted tab at one side and an angled tab at the other. A round moulded dot and small moulded lettering sit along its strap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale\u003c\/strong\u003e — the product images show a rounded, hollow, boot-like cap at the end of the strap, open on its face, with an angled anchor and a flat tab at the far end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Female stopper's head is the shape that pushes into a socket and seals against its walls with its ribs. The Male stopper's cap is the shape that fits over a plug and closes around it. Each stopper is named after the connector it closes.\u003c\/p\u003e\n\u003cp\u003eWhat the stopper lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBeing pulled out and pushed back in every time its connector is used\u003c\/li\u003e\n\u003cli\u003eSpray drift and residue settling on it while it hangs on its strap\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day\u003c\/li\u003e\n\u003cli\u003eSunlight and heat whenever the aircraft is parked outside\u003c\/li\u003e\n\u003cli\u003eSnagging on hands, tools and transport straps while it hangs open\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system, which works at the strap and the tab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is the rubber: a strap torn at the head or at the tab, a stopper lost after the strap broke, ribs or a cap edge split so it no longer seals, or rubber hardened so it no longer grips.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe stopper's engineering role is to seal an open connector and stay with the aircraft. It does that in three ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e — the Female head seals inside a socket, and the Male cap closes over a plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetaining\u003c\/strong\u003e — the strap and mounting tab keep the stopper attached when it is out of the connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcluding\u003c\/strong\u003e — while fitted, it keeps residue, dust and wash water off the connector contacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eContacts that have been left open in a spray environment collect residue, and residue on contacts causes intermittent connections that are hard to trace. The stopper prevents that for the time a connector is open, which is exactly when it is most exposed.\u003c\/p\u003e\n\u003cp\u003eWhat the stopper does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not carry current or signal; it only closes a connector that is not in use\u003c\/li\u003e\n\u003cli\u003eIt does not seal a connector that is plugged in; a mated connector seals itself\u003c\/li\u003e\n\u003cli\u003eIt does not clean or repair contacts that are already corroded\u003c\/li\u003e\n\u003cli\u003eIt does not seal a cable entry; that is the Cable Rubber Stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the stopper is named for the connector it closes, so look at the connector\u003c\/h2\u003e\n\u003cp\u003eThe only real mistake with a connector rubber stopper is ordering the wrong type. Female and Male look alike from a distance: both are black rubber straps of a similar kind with a stopper at one end and a tab at the other. They do opposite jobs.\u003c\/p\u003e\n\u003cp\u003eThe Female stopper's plug head is made to go into a socket. The Male stopper's hollow cap is made to go over a plug. A plug head cannot close a plug, and a cap cannot seal inside a socket. Fitting the wrong one either does not stay in or leaves the contacts open around it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTell them apart by the stopper end you removed:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA square head with a ribbed collar and a moulded face with cavities — Female\u003c\/li\u003e\n\u003cli\u003eA rounded, hollow cap that is open on its face — Male\u003c\/li\u003e\n\u003cli\u003eA T-shaped crossbar with a slotted tab at the far end of the strap — Female\u003c\/li\u003e\n\u003cli\u003eAn angled anchor with a flat tab at the far end of the strap — Male\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIf the stopper is lost, look at the connector it closed:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA connector that is a socket, with an opening for something to push into, takes the stopper whose head pushes in\u003c\/li\u003e\n\u003cli\u003eA connector that is a plug, standing proud with something to cover, takes the stopper whose cap fits over\u003c\/li\u003e\n\u003cli\u003eIf you are unsure, photograph the open connector and send it to us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point away from the stopper:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA connection is intermittent while plugged in — the stopper is not in the circuit; inspect the connector and its contacts\u003c\/li\u003e\n\u003cli\u003eWater is getting in where a cable passes through — that is the Cable Rubber Stopper\u003c\/li\u003e\n\u003cli\u003eA liquid joint in the spray system is weeping — that is a sealing ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdentify the type from the old stopper or the connector first, while that information is still cheap. A photograph answers it in seconds.\u003c\/p\u003e\n\u003cp\u003eA stopper with a torn strap, a split head or a split cap should be replaced even if it still pushes in. It will either fall out in flight or let residue in.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the connector rubber stopper when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA strap torn at the stopper end or at the mounting tab\u003c\/li\u003e\n\u003cli\u003eA stopper lost after its strap broke\u003c\/li\u003e\n\u003cli\u003eRibs on the Female plug head torn or flattened so it no longer grips in its socket\u003c\/li\u003e\n\u003cli\u003eThe edge of the Male cap split so it no longer closes around its plug\u003c\/li\u003e\n\u003cli\u003eRubber hardened, cracked when flexed, or no longer springing back\u003c\/li\u003e\n\u003cli\u003eA stopper that falls out of its connector during handling or flight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they are often affected together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe connector contacts the stopper protects, for residue or corrosion\u003c\/li\u003e\n\u003cli\u003eThe mounting point the tab anchors to\u003c\/li\u003e\n\u003cli\u003eAny other stoppers on the aircraft, which have lived through the same conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the connector rubber stopper. It is replaced when it is damaged, hardened or lost.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Connector Rubber Stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e Female; Male\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Wiring — connector protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Tethered connector rubber stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 stopper of the selected type\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale appearance:\u003c\/strong\u003e Black rubber strap with a square plug head, ribbed collar and multi-cavity face; T-shaped crossbar with slotted and angled tabs at the far end, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale appearance:\u003c\/strong\u003e Black rubber strap with a rounded, hollow, boot-like cap; angled anchor with a flat tab at the far end, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber, as named in the part designation; compound not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the stopper carries no current or signal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e At the connector it closes, anchored by its tab; the specific connector is not published for this part, so compare with the stopper you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Tab anchored at its mounting point; stopper pushed into or over the connector by hand\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM wiring-system rubber stopper\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eIdentify the type from the old stopper or from the connector it closes: plug head for a socket, hollow cap for a plug\u003c\/li\u003e\n\u003cli\u003ePhotograph the old stopper in place, showing where its tab is anchored and how its strap runs\u003c\/li\u003e\n\u003cli\u003eRinse and dry the area around the connector\u003c\/li\u003e\n\u003cli\u003eCompare the new stopper with the old one: stopper end, strap and mounting tab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePull the old stopper out of or off its connector by the stopper body, not by the strap\u003c\/li\u003e\n\u003cli\u003eRelease the old tab from its mounting point and note how it was held\u003c\/li\u003e\n\u003cli\u003eInspect the connector contacts; clean away residue and let them dry before closing them again\u003c\/li\u003e\n\u003cli\u003eAnchor the new stopper's tab at the same point, with the strap running the same way\u003c\/li\u003e\n\u003cli\u003ePush the stopper into or over the connector by hand until it sits fully home with no lifted edge\u003c\/li\u003e\n\u003cli\u003eDo not use grease or solvent on the rubber unless DJI service guidance for the aircraft calls for it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTug gently on the strap and confirm the tab is anchored\u003c\/li\u003e\n\u003cli\u003eConfirm the stopper stays seated when the area is handled\u003c\/li\u003e\n\u003cli\u003eConfirm the strap does not hang where a propeller, hose or moving part can catch it\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Refit stoppers on any open connector before washing the aircraft, never after. Flex-check the strap and the stopper end at the start of the season, because rubber hardens in storage as well as in use, and a strap that tears in flight takes the stopper with it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe connector rubber stopper is for operators and technicians keeping open connectors on the Talos T60X clean and dry:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators who have lost a stopper or torn its strap\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators with a stopper that no longer stays in or no longer closes\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors who unplug modules or leads for transport and payload changes\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians closing connectors during and after repairs\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking spare stoppers of both types for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater is getting in where a cable passes through — you need the Cable Rubber Stopper\u003c\/li\u003e\n\u003cli\u003eThe rubber you removed covered a weight sensor — you need the Weight Sensor Rubber Cover\u003c\/li\u003e\n\u003cli\u003eA liquid joint in the spray system is leaking — you need the Sealing Rings\u003c\/li\u003e\n\u003cli\u003eThe connector itself is cracked or its contacts are damaged — the stopper will not fix the connector\u003c\/li\u003e\n\u003cli\u003eYou need both types — Female and Male are separate lines; select each one you need\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this stopper is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA connector rubber stopper is small, but it protects the part of the aircraft that tolerates residue least: open electrical contacts. Residue that settles on contacts during a spray day does not cause a clean failure. It causes intermittent connections that come and go and are hard to pin down.\u003c\/p\u003e\n\u003cp\u003eThe stopper's job is to close a connector for exactly the time it is open, and its strap keeps it with the aircraft so it is there to refit. When the strap tears, the stopper is usually lost, and the connector stays open until someone notices.\u003c\/p\u003e\n\u003cp\u003eThe two types are the part to get right. Each is named after the connector it closes. The Female stopper ends in a ribbed plug head that pushes into a socket; the Male stopper ends in a hollow cap that fits over a plug. They are not two sizes of one thing, and one cannot stand in for the other.\u003c\/p\u003e\n\u003cp\u003eThe old stopper settles it, and if the stopper is lost the connector does. A socket takes the head that pushes in; a plug takes the cap that goes over. A photograph of either is enough for us to confirm the type.\u003c\/p\u003e\n\u003cp\u003eIdentify the connector, select the matching type, anchor the strap and seat the stopper fully. That keeps open contacts clean until they are used again.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Connector Rubber Stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e Female; Male\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Tethered connector rubber stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Wiring — connector protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Seals an open connector against residue, dust and wash water and stays attached by its strap\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale type:\u003c\/strong\u003e Square plug head with ribbed collar and multi-cavity face; pushes into a socket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale type:\u003c\/strong\u003e Rounded hollow cap; fits over a plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the stopper you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 stopper of the selected type\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e The connector, the cable, the Cable Rubber Stopper, the Sealing Rings, fixings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber; compound not published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Identify the type from the stopper end you removed, or from whether the open connector is a socket or a plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the leak is at a cable entry or a spray-system joint, or the connector itself is damaged\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM wiring-system rubber stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X connector stopper; T60X connector dust cap; Talos rubber plug; T60X female connector cap; T60X male connector cap\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Cable Rubber Stopper, not the Weight Sensor Rubber Cover, not the Sealing Rings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X connector rubber stopper\u003c\/p\u003e\n\u003cp\u003eT60X connector stopper\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X female connector rubber stopper\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X male connector rubber stopper\u003c\/p\u003e\n\u003cp\u003eTalos T60X connector dust cap\u003c\/p\u003e\n\u003cp\u003eT60X rubber plug\u003c\/p\u003e\n\u003cp\u003eTalos T60X connector cover\u003c\/p\u003e\n\u003cp\u003eT60X female connector cap\u003c\/p\u003e\n\u003cp\u003eT60X male connector cap\u003c\/p\u003e\n\u003cp\u003eTalos T60X tethered connector stopper\u003c\/p\u003e\n\u003cp\u003eT60X connector stopper lost\u003c\/p\u003e\n\u003cp\u003eDJI Talos connector rubber plug\u003c\/p\u003e\n\u003cp\u003eTalos T60X connector seal\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X wiring parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Connector Rubber Stopper\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Connector Rubber Stopper\u003c\/p\u003e\n\u003cp\u003eTalos T60X connector rubber stopper replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X seals\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X wiring protection\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone connector cap\u003c\/p\u003e\n\u003cp\u003espray drone rubber stopper\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Connector Rubber Stopper Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X connector rubber stopper?\u003c\/strong\u003e A tethered black rubber stopper that closes an open connector. It keeps residue, dust and wash water off the contacts and stays attached to the aircraft by its strap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Female and Male?\u003c\/strong\u003e The Female stopper ends in a square plug head with a ribbed collar, the shape that pushes into a socket. The Male stopper ends in a rounded hollow cap, the shape that fits over a plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre Female and Male a pair?\u003c\/strong\u003e No. They are two different parts for two different connectors. Each line is one stopper of one type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI lost the stopper. How do I know which type to select?\u003c\/strong\u003e Look at the open connector. A socket takes the Female stopper, whose head pushes in. A plug takes the Male stopper, whose cap fits over. If unsure, send us a photograph of the connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a Male stopper on a socket?\u003c\/strong\u003e No. The hollow cap cannot seal inside a socket, and the plug head cannot close over a plug. Select the type that matches the connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich connector on the aircraft does it close?\u003c\/strong\u003e The connector for each type is not published for this part. Match against the stopper you removed or a photograph of the open connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it carry any signal?\u003c\/strong\u003e No. It carries no current or signal. It only closes a connector that is not in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the Cable Rubber Stopper?\u003c\/strong\u003e No. The Connector Rubber Stopper closes a connector. The Cable Rubber Stopper sits on a cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe old one still pushes in but the strap is torn. Should I replace it?\u003c\/strong\u003e Yes. Without its strap it will be lost the next time it is pulled out, and the connector will be left open.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a stopper fix an intermittent connection?\u003c\/strong\u003e No. A stopper protects contacts that are clean. Contacts that are already contaminated or corroded need cleaning or the connector needs attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Anchor the tab where the old one was, route the strap the same way, and push the stopper into or over the connector until it is fully home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should the stopper be fitted?\u003c\/strong\u003e Whenever its connector is open, and always before washing the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. Flex-check stoppers at the start of each season and replace any that are torn, split, hardened or lost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM wiring-system rubber stopper, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Female","offer_id":68055445832000,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true},{"title":"Male","offer_id":68055445864768,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-connector-rubber-stopper-2.png?v=1794094909","url":"https:\/\/aresacres.com\/es\/products\/dji-talos-t60x-oem-connector-rubber-stopper","provider":"Ares Acres","version":"1.0","type":"link"}