{"product_id":"dji-talos-t60x-oem-front-shell-bottom-plate","title":"DJI Talos T60X OEM Front Shell Bottom Plate","description":"\u003cp\u003eThe DJI Talos T60X OEM Front Shell Bottom Plate is the long, grey, moulded plate that forms the underside of the front shell on the Talos T60X. The supplier photograph shows a wide plate with a raised section at each end, each with a large window cut-out, a recessed rectangular opening near the centre, rows of small rectangular slots along its lower edge, and small fittings at each end. It is an airframe shell component with no wiring or electronics of its own. It is listed by the supplier for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Because it sits underneath the front of the aircraft, it is the front shell part that lives closest to the ground, and the question most operators bring to it is a practical one: when a plate that is meant to take knocks has taken some, is it worn or is it finished?\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eListed by the supplier for the DJI Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by outline, raised end sections, window cut-outs and slot pattern against the front bottom plate you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM airframe shell component, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you want the match confirmed, photograph the old plate from the front and from below with both raised ends in view. Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Front Shell Bottom Plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne moulded plate, supplied on its own.\u003c\/strong\u003e It is the underside of the front shell only, not the Front Shell Module and not the Front Shell of Front Cover panel.\u003c\/p\u003e\n\u003cp\u003eNot included: the Front Shell Module, the Front Shell of Front Cover, the Rear Shell Bottom Plate, screws, clips, seals, and anything mounted to or through the plate. The small fittings visible at the ends of the plate in the supplier photograph are not counted as included hardware; compare with the plate you removed and transfer any fittings that are sound.\u003c\/p\u003e\n\u003cp\u003eIf screws or clips came off damaged with the old plate, replace them alongside it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe front shell bottom plate closes the underside of the front of the T60X body. Where the front cover shell faces forward and the front shell module sets the structure, the bottom plate is the floor of the front shell: the part you see when you look up at the aircraft from below.\u003c\/p\u003e\n\u003cp\u003eFrom the supplier photograph it is a long moulding with a raised section at each end, each with a large window cut-out, a recessed rectangular opening near the middle, rows of small rectangular slots along its lower edge, and fixing points at both ends. The raised ends and the slot pattern are what distinguish it from the rear shell bottom plate, which is a different shape; check them against the part you removed.\u003c\/p\u003e\n\u003cp\u003eWhat the plate is exposed to over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrit, dust and stubble thrown up on every take-off and landing\u003c\/li\u003e\n\u003cli\u003eSpray drift and residue collecting on the underside of the aircraft\u003c\/li\u003e\n\u003cli\u003ePressure washing aimed up under the body at the end of the day\u003c\/li\u003e\n\u003cli\u003eContact with uneven ground, crop rows and stones on landing\u003c\/li\u003e\n\u003cli\u003eScraping when the aircraft is slid onto or off a trailer bed or tailgate\u003c\/li\u003e\n\u003cli\u003eKnocks from refill hoses, tools and handling around the front of the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMost of that leaves marks. Some of it leaves damage. The difference between the two is what decides whether the plate needs replacing, and it is the most common question about this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe plate's engineering role is to close and protect the underside of the front shell. It does that in four ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure\u003c\/strong\u003e — it forms the floor of the front shell, so what sits inside is not open to the ground beneath\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding\u003c\/strong\u003e — it puts a moulded surface between the underside of the aircraft and the grit, residue and wash water thrown up from below\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing\u003c\/strong\u003e — its end fixings and slots hold it in a fixed position against the rest of the front shell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSacrificial surface\u003c\/strong\u003e — as the lowest front shell part, it takes scrapes and minor ground contact so that the parts above it do not\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe plate has no electrical role. It carries no current and no signal, it has no connector, and the aircraft does not monitor it.\u003c\/p\u003e\n\u003cp\u003eWhat the front shell bottom plate does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not replace the Front Shell Module or the Front Shell of Front Cover\u003c\/li\u003e\n\u003cli\u003eIt does not replace the Rear Shell Bottom Plate, which is a different part at the other end of the body\u003c\/li\u003e\n\u003cli\u003eIt does not repair anything inside the front shell that was damaged in the same landing\u003c\/li\u003e\n\u003cli\u003eIt does not straighten a front shell or frame that has moved\u003c\/li\u003e\n\u003cli\u003eIt does not change any setting, calibration or firmware behaviour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a scraped plate is doing its job; a cracked one has stopped\u003c\/h2\u003e\n\u003cp\u003eA bottom plate is meant to be marked. It is the lowest part of the front shell, it lives in the grit and residue thrown up from the ground, and every landing on rough ground and every slide onto a trailer bed puts another scrape on it. A plate that is scuffed, dulled and scratched is a plate that has been protecting the aircraft above it. That alone is not a reason to replace it.\u003c\/p\u003e\n\u003cp\u003eWhat ends a bottom plate's service is not appearance but integrity. Once the plate is cracked through, has lost a fixing point, or has been pushed out of its shape, it stops closing the underside properly and starts working loose under vibration. That is the line to look for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear — keep flying it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurface scratches and scuffs that do not go through the plate\u003c\/li\u003e\n\u003cli\u003eDulled or discoloured areas from residue and wash-down\u003c\/li\u003e\n\u003cli\u003eShallow scrape marks along the lower edge\u003c\/li\u003e\n\u003cli\u003eLight marks around the slots that do not extend into cracks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFailure — replace it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack that goes through the plate, however short\u003c\/li\u003e\n\u003cli\u003eA crack starting from the corner of a slot or the edge of a window cut-out\u003c\/li\u003e\n\u003cli\u003eA snapped or cracked end fixing, or a raised end section split at its base\u003c\/li\u003e\n\u003cli\u003eA dent or bow that leaves a gap between the plate and the shell around it\u003c\/li\u003e\n\u003cli\u003eA hole worn or punched through the surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to tell them apart:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith the aircraft powered down and the battery removed, clean the plate first; residue hides cracks and makes scuffs look worse than they are\u003c\/li\u003e\n\u003cli\u003eLook at the plate in raking light from several angles; a scratch reflects as a line, a crack shows as a shadow with an edge\u003c\/li\u003e\n\u003cli\u003eFlex the plate gently by hand near any suspect line; a crack opens, a scratch does not\u003c\/li\u003e\n\u003cli\u003eCheck every slot corner and both window cut-outs closely, because moulded corners are where cracks begin\u003c\/li\u003e\n\u003cli\u003eRemove the plate and look at its inner face; a crack that has reached the inside is through the plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo these checks first, while that information is still cheap. They take ten minutes and they stop a sound plate being thrown away for its scars, or a cracked one being left on because it still looks like the others.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the front shell bottom plate when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack through the plate anywhere along its length\u003c\/li\u003e\n\u003cli\u003eA crack from the corner of any slot or window cut-out\u003c\/li\u003e\n\u003cli\u003eA cracked or broken end fixing or raised end section\u003c\/li\u003e\n\u003cli\u003eTorn or elongated screw holes that no longer hold\u003c\/li\u003e\n\u003cli\u003eA bow or dent that leaves a visible gap against the surrounding shell\u003c\/li\u003e\n\u003cli\u003eA hole worn or punched through the surface\u003c\/li\u003e\n\u003cli\u003eA plate that buzzes or rattles in flight with all fixings present and tight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese on their own are wear, not a reason to replace:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurface scuffs and scratches\u003c\/li\u003e\n\u003cli\u003eDulling, staining or discolouration from residue\u003c\/li\u003e\n\u003cli\u003eShallow scrape marks along the lower edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because damage underneath the front of the aircraft rarely stops at one part:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Front Shell Module above the plate\u003c\/li\u003e\n\u003cli\u003eThe Front Shell of Front Cover at the front face\u003c\/li\u003e\n\u003cli\u003eThe landing gear and its mounts, after any hard or uneven landing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the bottom plate. It is replaced when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell Bottom Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — underside of the front body shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Front shell bottom plate (single moulded plate)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey, as shown in the supplier photograph\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisible features:\u003c\/strong\u003e Raised end sections with large window cut-outs, recessed rectangular opening near the centre, rows of small rectangular slots, fixing points at each end\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Underside of the front shell of the T60X; compare with the plate you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fixed to the front shell at its ends and along its slots; compare with the plate you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws, clips and seals are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — a moulded shell part with no wiring, connector or electronics of its own\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct and undamaged or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the underside of the aircraft so you are not working through residue and grit\u003c\/li\u003e\n\u003cli\u003eSupport the aircraft so you can reach the underside safely without it resting on the plate\u003c\/li\u003e\n\u003cli\u003ePhotograph the underside of the front shell from below and from each side\u003c\/li\u003e\n\u003cli\u003eLay the new plate beside the old one and compare the raised ends, the window cut-outs and the slot pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease the plate's fixings, working from one end to the other, and ease it away without levering against the shell\u003c\/li\u003e\n\u003cli\u003eWith the plate off, inspect the inside of the front shell and the Front Shell Module for damage from the same event\u003c\/li\u003e\n\u003cli\u003eTransfer any end fittings from the old plate only after checking each one for cracks\u003c\/li\u003e\n\u003cli\u003eClean the seating faces on the shell where the new plate will sit\u003c\/li\u003e\n\u003cli\u003eOffer the new plate up and start every fixing by hand before tightening any of them\u003c\/li\u003e\n\u003cli\u003eTighten the fixings evenly; DJI does not publish a torque figure for them, so stop when the plate is held firmly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the plate sits evenly along its full length with no gap against the shell\u003c\/li\u003e\n\u003cli\u003ePress along the plate; nothing should move, click or buzz\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight and listen for any buzz from the underside\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the cause in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Clean the underside at wash-down and look at the plate in good light. Scuffs can wait. A new line at a slot corner or a window edge should be checked the same day, because a crack in a moulded plate grows with every flight.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe front shell bottom plate is for operators and technicians closing up the underside of the front of a Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators repairing the underside after a hard or uneven landing\u003c\/li\u003e\n\u003cli\u003eCommercial spray and spreading contractors working from rough fields, stubble and gravel pads\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding T60X front shells\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking the front shell part most exposed to ground contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe plate is scuffed, scratched or stained but not cracked — that is wear, and the plate is still doing its job\u003c\/li\u003e\n\u003cli\u003eThe damage is underneath the rear of the aircraft — that is the Rear Shell Bottom Plate\u003c\/li\u003e\n\u003cli\u003eThe damage is on the forward face of the aircraft — that is the Front Shell of Front Cover\u003c\/li\u003e\n\u003cli\u003eThe open structure behind the front of the aircraft is cracked — that is the Front Shell Module\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — the plate is listed by the supplier for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe front shell bottom plate is the one shell part on the front of the T60X whose job is to get marked. It sits lowest, takes the grit and stubble on every landing, and takes the scrape when the aircraft is slid onto a trailer. A plate covered in scuffs after a season is not a worn-out plate. It is a plate that has protected the parts above it, and it can keep doing so.\u003c\/p\u003e\n\u003cp\u003eThat is the honest case against replacing it. A plate that is scratched, dulled or stained still closes the underside, still holds its fixings, and still shields the front shell from below. Replacing it for appearance buys a cleaner underside and nothing else.\u003c\/p\u003e\n\u003cp\u003eThe case for replacing it is equally clear, and it is about integrity. A crack through the plate, a broken end fixing, or a bow that opens a gap against the shell changes what the plate does. The underside is no longer closed. The plate starts to move on its fixings under vibration, and a moving plate cracks further at every slot corner it has.\u003c\/p\u003e\n\u003cp\u003eThe Diagnosis section gives the test: clean it, look in raking light, flex near any suspect line, check every corner, look at the inside face. Scuffs reflect. Cracks cast shadows and open when flexed. That ten-minute check is the whole decision, and it is worth making properly in both directions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell Bottom Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Front shell bottom plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — underside of the front body shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Underside of the front shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Closes and shields the underside of the front shell and takes minor ground contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisible features:\u003c\/strong\u003e Raised end sections with window cut-outs, recessed central opening, rows of rectangular slots\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical role:\u003c\/strong\u003e None — no wiring, connector or electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched from a photograph of the label on the part removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Front Shell Module, Front Shell of Front Cover, Rear Shell Bottom Plate, screws, clips, seals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Scuffs and scratches are wear; a crack through the plate, a broken fixing or a gap against the shell is failure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical damage:\u003c\/strong\u003e Cracks from slot corners and window edges, broken end fixings, bows from uneven landings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X front bottom plate; T60X front underside panel; Talos T60X front belly plate; T60X front shell base plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Rear Shell Bottom Plate, not the Front Shell Module, not the Front Shell of Front Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Talos T60X front shell bottom plate replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X front bottom plate\u003c\/p\u003e\n\u003cp\u003eT60X front shell bottom plate\u003c\/p\u003e\n\u003cp\u003eTalos T60X front underside panel\u003c\/p\u003e\n\u003cp\u003eT60X front belly plate\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell base plate\u003c\/p\u003e\n\u003cp\u003eT60X bottom plate cracked\u003c\/p\u003e\n\u003cp\u003eT60X underside damage after landing\u003c\/p\u003e\n\u003cp\u003eDJI T60X bottom plate part\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell underside\u003c\/p\u003e\n\u003cp\u003eT60X front bottom plate scuffed or cracked\u003c\/p\u003e\n\u003cp\u003eTalos T60X bottom shell plate\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell Bottom Plate\u003c\/p\u003e\n\u003cp\u003eTalos T60X Front Shell Bottom Plate\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Front Shell Bottom Plate\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell bottom plate replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X body shell parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X airframe parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003espray drone bottom plate\u003c\/p\u003e\n\u003cp\u003eagricultural drone underside panel\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI OEM spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell Bottom Plate Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Talos T60X front shell bottom plate?\u003c\/strong\u003e The long, grey, moulded plate that closes the underside of the T60X front shell. It has a raised section with a window cut-out at each end, a recessed opening near the centre, and rows of small slots.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is listed by the supplier for the Talos T60X. Compare it with the plate you removed: raised ends, window cut-outs and slot pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit other DJI spray aircraft?\u003c\/strong\u003e It is listed for the Talos T60X only. We do not offer it for any other aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy bottom plate is badly scuffed. Should I replace it?\u003c\/strong\u003e Not for scuffs alone. Scratches and dulling are wear from doing its job. Replace it when it is cracked through, has a broken fixing, or no longer sits flush against the shell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tell a scratch from a crack?\u003c\/strong\u003e Clean the plate and look in raking light. A scratch reflects as a line; a crack casts a shadow and opens when you flex the plate gently beside it. Check the inner face too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere do cracks usually start?\u003c\/strong\u003e At the corners of the slots and the edges of the two window cut-outs, where the moulding changes direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the rear shell bottom plate?\u003c\/strong\u003e No. The rear shell bottom plate is a different part with a different shape, under the rear of the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the fittings at the ends included?\u003c\/strong\u003e Count only the plate as included. Compare with the plate you removed and transfer any end fittings that are sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a cracked bottom plate cause an error on the remote controller?\u003c\/strong\u003e No. It has no wiring and nothing monitors it. A cracked plate lets grit and residue into the underside of the front shell and can buzz or work loose in flight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy plate buzzes in flight. Is it cracked?\u003c\/strong\u003e Check the fixings first. If every fixing is present and tight and the plate still buzzes, look for a crack or a bow that has opened a gap against the shell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Support the aircraft so it does not rest on the plate, release the fixings from one end, start every new fixing by hand, then tighten evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the fixings?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the plate is held firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. The plate is replaced when it is damaged, not when it is scuffed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM airframe shell component, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68048380985664,"sku":null,"price":75.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-front-shell-bottom-plate-1.png?v=1793966943","url":"https:\/\/aresacres.com\/es\/products\/dji-talos-t60x-oem-front-shell-bottom-plate","provider":"Ares Acres","version":"1.0","type":"link"}