{"product_id":"dji-talos-t60x-oem-front-shell-module","title":"DJI Talos T60X OEM Front Shell Module","description":"\u003cp\u003eThe DJI Talos T60X OEM Front Shell Module is the open, grey, moulded structure at the front of the Talos T60X body shell. In the supplier photograph it is a frame-shaped moulding rather than a flat panel: an open centre, a raised upper section with mounting posts and tabs, a wide body that curves down at each side, and two round, tube-like openings at its lower corners. It is an airframe shell component, carrying no wiring or electronics of its own, and its job is to give the front of the aircraft its shape and to hold the pieces fitted into and onto it in the right place. It is listed by the supplier for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for it after a nose-first impact, a hard landing that twisted the front of the aircraft, or a transport knock that cracked a mounting tab, and the question they are trying to answer is whether a module that still hangs together is still the right shape.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eListed by the supplier for the DJI Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by outline, mounting posts, tabs and the two lower round openings against the front shell module you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM airframe shell component, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you want the match confirmed, photograph the old module from the front and from above, with the two round openings and the upper mounting posts in view. Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Front Shell Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne moulded module, supplied on its own.\u003c\/strong\u003e It is the front shell structure only: not a complete shell set, not a front cover, and not a bottom plate.\u003c\/p\u003e\n\u003cp\u003eNot included: the Front Shell of Front Cover panel, the Front Shell Bottom Plate, screws, clips, rubber seals, any light, lens, sensor or camera fitted through or onto the module, cables, and decals. Those are separate parts. Anything you can see seated in the round openings of the supplier photograph is not counted as included; the module is the moulding.\u003c\/p\u003e\n\u003cp\u003eIf screws or clips came off damaged with the old module, replace them at the same time rather than refitting stretched or cracked hardware into new mounting holes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe front shell module is the part that sets the shape of the front of the T60X. Where a cover panel is a skin, the module is a structure: it has an open centre, a raised upper section carrying mounting posts and tabs, and a body that wraps down at each side to two round, tube-like openings at the lower corners.\u003c\/p\u003e\n\u003cp\u003eBecause it is open in the middle, the module is plainly not meant to be the outer face of the aircraft on its own. It is the part other pieces are positioned by. The supplier photograph shows small tabs along the inner edges and posts across the top, which is how a moulding like this is located and fixed; the exact fixing pattern on your aircraft is best read from the part you removed.\u003c\/p\u003e\n\u003cp\u003eWhat the module is asked to do, flight after flight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHold its own outline, so that panels fitted to it close up evenly\u003c\/li\u003e\n\u003cli\u003eKeep its mounting posts and tabs in the positions they were moulded in\u003c\/li\u003e\n\u003cli\u003eKeep the two lower round openings aligned with whatever passes through or sits in them on your aircraft\u003c\/li\u003e\n\u003cli\u003eCarry the vibration of the propulsion system without cracking at the tabs\u003c\/li\u003e\n\u003cli\u003eSurvive wash-down, chemical mist and dust on its exposed surfaces\u003c\/li\u003e\n\u003cli\u003eStand up to handling when the aircraft is loaded, carried and serviced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat damages it is almost always a single mechanical event: a nose-first contact with the ground or a crop obstacle, a hard landing that loads the front of the body, a fall from a trailer or tailgate, or a previous repair that forced it onto its fixings. The usual results are a cracked or snapped tab, a split around a mounting post, a crack running from one of the round openings, or a twist across the open centre.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe module's engineering role is location. It does that in four ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutline\u003c\/strong\u003e — it defines the shape of the front of the body, so the panels fitted to it meet their neighbours along the lines DJI designed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing points\u003c\/strong\u003e — its posts and tabs are the reference positions for everything screwed or clipped to it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpenings\u003c\/strong\u003e — the two round openings at the lower corners hold their position relative to the rest of the front of the aircraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad path\u003c\/strong\u003e — it spreads handling and vibration loads into its fixings instead of into the panels it carries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe module has no electrical role. It carries no current and no signal, has no connector, and nothing on the aircraft monitors it. The aircraft cannot tell you it is bent.\u003c\/p\u003e\n\u003cp\u003eWhat the front shell module does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not replace the Front Shell of Front Cover panel; that is a separate part\u003c\/li\u003e\n\u003cli\u003eIt does not replace the Front Shell Bottom Plate; that is a separate part\u003c\/li\u003e\n\u003cli\u003eIt does not repair anything fitted through its round openings\u003c\/li\u003e\n\u003cli\u003eIt does not straighten a bent airframe behind it; it follows the frame it is fixed to\u003c\/li\u003e\n\u003cli\u003eIt does not change any setting, calibration or firmware behaviour; it restores a physical shape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a module that still holds can still be the wrong shape\u003c\/h2\u003e\n\u003cp\u003eA damaged front shell module rarely falls off. Moulded structures with several fixing points tend to stay attached after an impact, held by the posts and tabs that survived. That is what makes the damage easy to live with and easy to miss: the front of the aircraft looks assembled, so the module is assumed to be fine.\u003c\/p\u003e\n\u003cp\u003eThe question is not whether the module holds. It is whether it still holds things where they belong. A tab that has cracked and closed up again, a post that has leaned a few degrees, or a twist across the open centre will still let the panels go on. They simply go on in the wrong place, and every piece fitted to the module inherits the error.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat a module that has moved looks like on the aircraft:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePanels that used to close up flush now leave a gap on one side and pinch on the other\u003c\/li\u003e\n\u003cli\u003eA screw that used to start by hand now has to be pushed or levered to find its hole\u003c\/li\u003e\n\u003cli\u003eOne of the two lower round openings no longer lines up with what sits in it, or sits higher or lower than the other\u003c\/li\u003e\n\u003cli\u003eA clip that used to snap home now needs force, or will not stay engaged\u003c\/li\u003e\n\u003cli\u003eThe front of the aircraft looks slightly skewed when you sight along it from the front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect the module itself:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith the aircraft powered down and the battery removed, look closely at every tab and post for hairline cracks, especially at their roots where they meet the body\u003c\/li\u003e\n\u003cli\u003eCheck each round opening for cracks running outward from its rim\u003c\/li\u003e\n\u003cli\u003eSight across the open centre from the front and from above and compare the two sides; a twist shows as one side sitting higher or further forward\u003c\/li\u003e\n\u003cli\u003eRemove the module if you can and lay it on a flat surface; a module that rocks is not flat\u003c\/li\u003e\n\u003cli\u003eCompare it, tab for tab, with the same area on another T60X if you have one in the fleet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point somewhere else:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the module is straight and uncracked but the panels still do not close, look at the panels themselves and at their clips\u003c\/li\u003e\n\u003cli\u003eIf the whole front of the aircraft sits skewed, check the frame behind the shell before blaming the shell\u003c\/li\u003e\n\u003cli\u003eIf a fitting in one of the round openings is loose but the opening itself is sound, the fitting or its retainer is the fault, not the module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo these checks first, while that information is still cheap. They cost minutes, and they decide whether the job is one moulded module or something deeper in the airframe.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the front shell module when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cracked, snapped or missing mounting tab\u003c\/li\u003e\n\u003cli\u003eA split at the root of a mounting post\u003c\/li\u003e\n\u003cli\u003eA crack running from the rim of either lower round opening\u003c\/li\u003e\n\u003cli\u003eA twist across the open centre, seen as one side sitting higher or further forward than the other\u003c\/li\u003e\n\u003cli\u003eTorn or elongated screw holes that no longer hold a fixing firmly\u003c\/li\u003e\n\u003cli\u003ePanels that no longer close evenly against the module when the panels themselves are sound\u003c\/li\u003e\n\u003cli\u003eAny nose-first impact that visibly deformed the front of the body\u003c\/li\u003e\n\u003cli\u003eA module that rocks when laid on a flat surface\u003c\/li\u003e\n\u003cli\u003ePrevious repairs with adhesive, plastic welding or cable ties holding a tab in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Front Shell of Front Cover panel and its clips\u003c\/li\u003e\n\u003cli\u003eThe Front Shell Bottom Plate and its fixings\u003c\/li\u003e\n\u003cli\u003eThe frame structure behind the front shell\u003c\/li\u003e\n\u003cli\u003eWhatever is fitted through the two round openings on your aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the front shell module. It is replaced when it is damaged, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — front body shell structure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Front shell module (single moulded structure)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey, as shown in the supplier photograph\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisible features:\u003c\/strong\u003e Open centre, raised upper section with mounting posts and tabs, two round tube-like openings at the lower corners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Front of the T60X body shell; compare with the module you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fixed to the airframe through its posts, tabs and screw points; panels then fitted to it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws, clips and seals are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — a moulded shell part with no wiring, connector or electronics of its own\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct and undamaged or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the front of the aircraft so you are not working through chemical residue\u003c\/li\u003e\n\u003cli\u003ePhotograph the front of the aircraft from the front, from above and from each side before anything comes off\u003c\/li\u003e\n\u003cli\u003eNote which panels, fittings and cables are attached to or pass through the module, and in what order they come off\u003c\/li\u003e\n\u003cli\u003eLabel any connector you have to unplug to free a fitting from the module\u003c\/li\u003e\n\u003cli\u003eLay the new module beside the old one and compare the outline, the posts, the tabs and the two round openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the panels fitted to the module first, then release the module's own fixings\u003c\/li\u003e\n\u003cli\u003eEase the module away without levering against tabs that are still engaged; a tab that is still sound on the old part is a tab you can read for routing\u003c\/li\u003e\n\u003cli\u003eTransfer any fittings from the old module to the new one only after checking each fitting for damage of its own\u003c\/li\u003e\n\u003cli\u003eSeat the new module on its fixings by hand before tightening anything, so every post and tab finds its position without force\u003c\/li\u003e\n\u003cli\u003eTighten the fixings evenly and in stages; DJI does not publish a torque figure for these fixings, so stop when the module is held firmly and do not pull plastic into a screw head\u003c\/li\u003e\n\u003cli\u003eRefit the panels and check that each one closes up evenly against the new module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSight along the front of the aircraft from the front and from above; both sides should match\u003c\/li\u003e\n\u003cli\u003eCheck that both lower round openings sit level with each other and line up with their fittings\u003c\/li\u003e\n\u003cli\u003eConfirm every clip is engaged and every screw is present\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight and listen for any rattle from the front of the body\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the cause of the damage in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e At wash-down, look at the module's exposed tabs and the rims of the two round openings. A crack in a moulding grows with vibration, so a hairline caught after a hard landing is a planned replacement; the same crack found after a season is a part that let go in the field.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe front shell module is for operators and technicians putting the front of a Talos T60X back to its original shape:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators repairing the front of the aircraft after a nose-first impact or hard landing\u003c\/li\u003e\n\u003cli\u003eCommercial spray and spreading contractors keeping T60X airframes in service through the season\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding T60X front shells\u003c\/li\u003e\n\u003cli\u003eTechnicians chasing panels that no longer close evenly after a repair\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping a front shell module on the trailer for the T60X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnly the outer front cover panel is cracked or scuffed and the module behind it is sound — that panel is the Front Shell of Front Cover, a separate part\u003c\/li\u003e\n\u003cli\u003eThe damage is to the plate underneath the front of the aircraft — that is the Front Shell Bottom Plate\u003c\/li\u003e\n\u003cli\u003eThe fault is in a fitting seated in one of the round openings and the opening itself is undamaged\u003c\/li\u003e\n\u003cli\u003eThe frame behind the shell is bent — a new module fitted to a bent frame takes the frame's shape; repair the frame first\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — the module is listed by the supplier for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe front shell module is a structure whose whole value is in its geometry. It is not there to be strong in the way a frame tube is strong; it is there to hold a set of posts, tabs and openings in exact positions relative to each other, so that everything fitted to it lands where DJI put it.\u003c\/p\u003e\n\u003cp\u003eThat is why a module that has survived an impact can still be the wrong part to keep. A cracked tab that has closed up, a post that has leaned, or a slight twist across the open centre leaves a module that still holds. Holding is not the test. A module that holds every panel a little out of place makes every panel fit badly, puts uneven load on every clip, and leaves the two lower openings out of line with each other.\u003c\/p\u003e\n\u003cp\u003eThe cost of keeping it shows up slowly. Clips that are forced home wear and break. Screws that are pushed into misaligned holes strip them. Panels that pinch on one side crack at the pinch point. Each of those is another part, and each one is a symptom of the module, not a separate failure.\u003c\/p\u003e\n\u003cp\u003eReplacing the module resets all of that at once. With the structure back to its moulded shape, the panels close evenly, the clips engage without force, and the round openings line up again. It is the difference between treating the symptoms one panel at a time and putting the reference back.\u003c\/p\u003e\n\u003cp\u003eIf inspection shows the module is straight and sound, keep it. The checks in the Diagnosis section are there to tell you which case you are in, so that the module is replaced when it has moved and left alone when it has not.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Front shell module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — front body shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Front of the T60X body shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Sets the shape of the front of the body and locates the panels and fittings attached to it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisible features:\u003c\/strong\u003e Open centre, upper mounting posts and tabs, two round openings at the lower corners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical role:\u003c\/strong\u003e None — no wiring, connector or electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched from a photograph of the label on the part removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Front Shell of Front Cover, Front Shell Bottom Plate, screws, clips, seals, fittings seated in the openings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A damaged module usually still holds; the test is whether panels close evenly and the two lower openings sit level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical damage:\u003c\/strong\u003e Cracked tabs, split posts, cracks from the round openings, twist across the open centre\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X front shell; T60X front shell frame; Talos T60X front body shell; T60X nose shell module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Front Shell of Front Cover panel, not the Front Shell Bottom Plate, not a rear shell part, not a complete shell set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Talos T60X front shell module replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell\u003c\/p\u003e\n\u003cp\u003eT60X front shell module\u003c\/p\u003e\n\u003cp\u003eTalos T60X front body shell\u003c\/p\u003e\n\u003cp\u003eT60X front shell structure\u003c\/p\u003e\n\u003cp\u003eTalos T60X nose shell\u003c\/p\u003e\n\u003cp\u003eT60X front shell cracked tab\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell repair\u003c\/p\u003e\n\u003cp\u003eT60X front panels not closing evenly\u003c\/p\u003e\n\u003cp\u003eDJI T60X front shell part\u003c\/p\u003e\n\u003cp\u003eTalos T60X shell module\u003c\/p\u003e\n\u003cp\u003eT60X crash repair front shell\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell Module\u003c\/p\u003e\n\u003cp\u003eTalos T60X Front Shell Module\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Front Shell Module\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell module replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X body shell parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X airframe parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003espray drone body shell parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone shell replacement\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI OEM spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell Module Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Talos T60X front shell module?\u003c\/strong\u003e The open, grey moulded structure at the front of the T60X body shell. It has an open centre, mounting posts and tabs across the top, and two round, tube-like openings at its lower corners. It sets the shape of the front of the aircraft and locates the panels fitted to it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is listed by the supplier for the Talos T60X. Compare it with the module you removed: outline, posts, tabs and the two lower openings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit other DJI spray aircraft?\u003c\/strong\u003e It is listed for the Talos T60X only. We do not offer it for any other aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same part as the Front Shell of Front Cover?\u003c\/strong\u003e No. The Front Shell of Front Cover is a closed panel. The module is the open structure behind the front of the aircraft. They are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Front Shell Bottom Plate included?\u003c\/strong\u003e No. The bottom plate is a separate part, as are screws, clips, seals and anything fitted through the round openings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy module is cracked at one tab but still holds. Do I need to replace it?\u003c\/strong\u003e Check whether the panels close evenly and the two lower openings sit level. If they do not, the module has moved and should be replaced. A tab that has cracked will keep working loose under vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a damaged front shell module cause an error on the remote controller?\u003c\/strong\u003e Not directly. It has no wiring and nothing monitors it. Its effects are physical: panels that do not close, clips that will not hold, openings out of line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do my front panels leave a gap on one side after a crash?\u003c\/strong\u003e If the panels themselves are sound, the module they fit to has usually moved: a twisted centre, a leaning post or a cracked tab. Inspect the module first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a broken tab?\u003c\/strong\u003e A glued tab rarely holds its original position under vibration, and a module that has been glued is usually also slightly distorted. Replace the module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the fittings in the round openings included?\u003c\/strong\u003e No. The module is supplied as the moulding only. Transfer your fittings after checking each one for damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Photograph the front of the aircraft first, remove the panels before the module, seat the new module by hand, and tighten the fixings evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the fixings?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the module is held firmly; over-tightening can crack the plastic around a screw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. The module is replaced when it is damaged, usually after an impact or hard landing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM airframe shell component, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68048377610560,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-front-shell-module-1.png?v=1793966922","url":"https:\/\/aresacres.com\/es\/products\/dji-talos-t60x-oem-front-shell-module","provider":"Ares Acres","version":"1.0","type":"link"}