{"product_id":"dji-talos-t60x-oem-front-shell-of-front-cover","title":"DJI Talos T60X OEM Front Shell of Front Cover","description":"\u003cp\u003eThe DJI Talos T60X OEM Front Shell of Front Cover is the closed, grey outer panel of the front cover on the Talos T60X. The supplier photograph shows a solid moulded panel with a raised, tapered ridge running down its centre, two angled recesses where the ridge meets the top edge, a wide flat wing on each side with a single fixing hole near its outer end, and two tabs projecting from the bottom edge. It is an airframe shell component with no wiring or electronics of its own: the outer skin of the front cover, the face of the aircraft that meets spray, dust and the occasional crop obstacle first. It is listed by the supplier for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. The name is long because it is precise. It is the shell, of the cover, at the front, and each of those words rules out a different part that sits close by and looks like a reasonable guess when you are standing over a damaged aircraft.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eListed by the supplier for the DJI Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by outline, centre ridge, side fixing holes and lower tabs against the front cover shell you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM airframe shell component, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you want the match confirmed, photograph the old panel face-on with both side fixing holes and the two lower tabs in view. Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Front Shell of Front Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne closed panel, supplied on its own.\u003c\/strong\u003e It is the outer shell of the front cover only, not the Front Shell Module behind it and not the Front Shell Bottom Plate below it.\u003c\/p\u003e\n\u003cp\u003eNot included: the Front Shell Module, the Front Shell Bottom Plate, screws for the two side fixing holes, clips, seals, decals, and anything mounted behind the panel. Those are separate parts.\u003c\/p\u003e\n\u003cp\u003eIf the screws that held the old panel are bent or their heads are damaged, replace them with it; a new panel held by a damaged screw is a new panel that will crack at the same hole.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe front shell of the front cover is the closed outer panel at the front of the T60X. It is the surface you see when you face the aircraft: a raised ridge tapering down the centre, angled recesses at the top of the ridge, and a broad wing on each side.\u003c\/p\u003e\n\u003cp\u003eUnlike the front shell module, which is an open structure, this panel is solid. It closes the front of the aircraft and presents a continuous face to the outside. From the photograph it is fixed by a screw through each side wing and located by the two tabs on its lower edge; check those against the panel you removed, because the tabs and holes are what make it the right panel.\u003c\/p\u003e\n\u003cp\u003eWhat the panel is exposed to over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray mist and chemical residue settling on the face of the aircraft\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of each spray day\u003c\/li\u003e\n\u003cli\u003eDust, chaff and grit thrown up on take-off and landing\u003c\/li\u003e\n\u003cli\u003eBrushes with crop canopy, branches and wires at the front of the aircraft\u003c\/li\u003e\n\u003cli\u003eKnocks during loading, transport and refilling\u003c\/li\u003e\n\u003cli\u003eSunlight on the exposed face whenever the aircraft is parked outside\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat damages it is usually contact: a nose-first touch on a crop row, a branch strike, a fall during handling, or a tool dropped against the front of the aircraft. The usual results are a crack through the face, a crack radiating from a side fixing hole, a snapped lower tab, or a gouge through the surface of the ridge.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe panel's engineering role is closure. It does that in four ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e — it closes the front of the cover so that what sits behind it is not exposed to spray, residue and wash water head-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e — its ridge and wings give the front of the aircraft its outer shape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing\u003c\/strong\u003e — two side screw points and two lower tabs hold it in a fixed position against the parts around it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSacrificial face\u003c\/strong\u003e — as the outermost surface at the front, it takes minor contact so that the structure behind it does not\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe panel has no electrical role. It carries no current and no signal, it has no connector, and the aircraft does not monitor it.\u003c\/p\u003e\n\u003cp\u003eWhat the front cover shell does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not replace the Front Shell Module; the module is the structure, the panel is the skin\u003c\/li\u003e\n\u003cli\u003eIt does not replace the Front Shell Bottom Plate underneath the front of the aircraft\u003c\/li\u003e\n\u003cli\u003eIt does not repair anything behind it that was damaged in the same impact\u003c\/li\u003e\n\u003cli\u003eIt does not straighten a module or frame that has moved; it fits to whatever it is fixed to\u003c\/li\u003e\n\u003cli\u003eIt does not change any setting, calibration or firmware behaviour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — read the name as an address before you read the damage\u003c\/h2\u003e\n\u003cp\u003eThree front shell parts are listed for the T60X: the Front Shell Module, the Front Shell of Front Cover, and the Front Shell Bottom Plate. They share words, they sit next to each other, and after an impact more than one of them can be marked. The part you need is decided by where the damage is, so the first job is to read each name as a location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow the three names map to the aircraft:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Shell of Front Cover\u003c\/strong\u003e — the closed outer panel that faces forward: solid face, raised centre ridge, side wings with one fixing hole each, two tabs on the lower edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Shell Module\u003c\/strong\u003e — the open structure behind the front of the aircraft: open centre, posts and tabs across the top, two round openings at the lower corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Shell Bottom Plate\u003c\/strong\u003e — the long plate under the front of the body, with raised ends and rows of slots\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the damage is on the solid face you look at from in front of the aircraft, it is this panel. If the face is sound but something behind it is cracked or the round openings are affected, it is the module. If the damage is underneath, it is the bottom plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThen decide whether the panel itself is damaged or only displaced:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith the aircraft powered down and the battery removed, look across the face of the panel in raking light; cracks and stress whitening show far better at a low angle\u003c\/li\u003e\n\u003cli\u003eCheck each side fixing hole for a crack running outward from its edge\u003c\/li\u003e\n\u003cli\u003eCheck both lower tabs for cracks at their roots\u003c\/li\u003e\n\u003cli\u003eRemove the panel and look at its back face, where cracks often start before they reach the front\u003c\/li\u003e\n\u003cli\u003eOffer the panel back up by hand; a panel that only fits with force may be sound and sitting on a module that has moved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point somewhere else:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA panel with no cracks that will not sit flush usually means the module behind it has moved, not that the panel is wrong\u003c\/li\u003e\n\u003cli\u003eA panel that rattles with intact tabs and holes usually means missing or loose screws\u003c\/li\u003e\n\u003cli\u003eA gap that appears only in flight points at the fixings, not the panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo these checks first, while that information is still cheap. Reading the name as an address, and the damage as cracked or merely displaced, is what gets the right part on the bench the first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the front cover shell when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack anywhere through the face of the panel\u003c\/li\u003e\n\u003cli\u003eA crack radiating from either side fixing hole\u003c\/li\u003e\n\u003cli\u003eA cracked, snapped or missing lower tab\u003c\/li\u003e\n\u003cli\u003eA gouge or puncture through the surface of the centre ridge\u003c\/li\u003e\n\u003cli\u003eA fixing hole torn or elongated so that the screw no longer holds\u003c\/li\u003e\n\u003cli\u003eStress whitening across the face after an impact, showing the plastic has been bent past its limit\u003c\/li\u003e\n\u003cli\u003ePrevious repairs with adhesive or tape across a crack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Front Shell Module behind the panel, its tabs and posts\u003c\/li\u003e\n\u003cli\u003eThe screws at the two side fixing holes\u003c\/li\u003e\n\u003cli\u003eThe Front Shell Bottom Plate below the front of the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSurface scuffs and dulling from wash-down and sunlight are not, on their own, a reason to replace the panel. There is no published service interval for it. It is replaced when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell of Front Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — front cover, outer shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Front cover outer shell panel (single moulded panel)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 panel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey, as shown in the supplier photograph\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisible features:\u003c\/strong\u003e Solid face, raised tapered centre ridge with angled recesses at the top, a side wing each side with one fixing hole, two tabs on the lower edge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Outer face of the front cover of the T60X; compare with the panel you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Located by the two lower tabs and fixed through the two side holes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws and clips are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — a moulded shell part with no wiring, connector or electronics of its own\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct and undamaged or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the front of the aircraft so residue does not end up behind the new panel\u003c\/li\u003e\n\u003cli\u003ePhotograph the front of the aircraft face-on and from each side\u003c\/li\u003e\n\u003cli\u003eCompare the new panel with the old one: outline, centre ridge, both side fixing holes, both lower tabs\u003c\/li\u003e\n\u003cli\u003eHave replacement screws ready if the old ones are bent or have damaged heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the two side screws and ease the panel away, freeing the lower tabs last\u003c\/li\u003e\n\u003cli\u003eWith the panel off, inspect the Front Shell Module behind it for cracks or movement; this is the best view of it you will get\u003c\/li\u003e\n\u003cli\u003eClean the seating faces where the new panel will sit\u003c\/li\u003e\n\u003cli\u003eEngage the two lower tabs first, then swing the panel into place against the module\u003c\/li\u003e\n\u003cli\u003eStart both side screws by hand before tightening either; DJI does not publish a torque figure for them, so tighten evenly and stop when the panel is held firmly\u003c\/li\u003e\n\u003cli\u003eIf the panel needs force to reach its holes, stop and check the module before you tighten anything\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the panel sits flush and evenly along all of its edges\u003c\/li\u003e\n\u003cli\u003ePress gently on each wing and on the ridge; nothing should move or creak\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight and listen for any rattle from the front\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and what caused the damage in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e At wash-down, look across the face of the panel in low light and check the two side screws. A loose screw lets the panel move on every flight, and a panel that moves cracks at its fixing hole.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe front cover shell is for operators and technicians restoring the outer front face of a Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators repairing the front face after a branch strike, crop contact or handling knock\u003c\/li\u003e\n\u003cli\u003eCommercial spray and spreading contractors keeping T60X aircraft closed up and serviceable through the season\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding T60X front covers\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking the most exposed front panel for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe outer panel is intact and the damage is to the open structure behind it — that is the Front Shell Module\u003c\/li\u003e\n\u003cli\u003eThe damage is underneath the front of the aircraft — that is the Front Shell Bottom Plate\u003c\/li\u003e\n\u003cli\u003eThe panel is uncracked but will not sit flush — check the module behind it first; a new panel will not fit a module that has moved\u003c\/li\u003e\n\u003cli\u003eThe only problem is a missing or stripped screw — replace the screw\u003c\/li\u003e\n\u003cli\u003eThe panel is scuffed or dulled but not cracked — that is cosmetic wear, not a failure\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — the panel is listed by the supplier for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe name of this part is unusually long, and every word in it is doing work. Front tells you which end of the aircraft. Cover tells you which assembly. Shell tells you it is the outer skin of that assembly rather than the structure behind it. Read together, the name is an address, and it points at one panel among several that share the same words.\u003c\/p\u003e\n\u003cp\u003eThat matters because the three T60X front shell parts are easy to confuse when you are standing over a damaged aircraft. The panel on the face of the aircraft is the obvious casualty after any forward contact, but the open module behind it and the plate underneath can be damaged in the same event. Ordering the panel because it is the part you can see, when the module is the part that moved, leaves you with a new panel that will not sit flush.\u003c\/p\u003e\n\u003cp\u003eThe checks in the Diagnosis section separate those cases quickly. Damage on the solid outer face is this panel. A sound panel that will not sit right is the module. Damage underneath is the bottom plate. Ten minutes with the panel off, looking at its back face and at the module behind it, answers the question.\u003c\/p\u003e\n\u003cp\u003eWhen the panel is the damaged part, replacing it restores the closed front of the aircraft: residue and wash water meet a continuous face again, the side fixings hold without strain, and the lower tabs locate the panel where it belongs. When it is not, leave it on and fix what is actually wrong.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell of Front Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Front cover outer shell panel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — front cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Outer forward face of the front cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Closes and shapes the front of the aircraft and takes minor contact at the front face\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisible features:\u003c\/strong\u003e Raised tapered centre ridge, side wings with one fixing hole each, two lower tabs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical role:\u003c\/strong\u003e None — no wiring, connector or electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched from a photograph of the label on the part removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 panel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Front Shell Module, Front Shell Bottom Plate, screws, clips, seals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Read the name as a location: outer front face is this panel, open structure behind is the module, underside is the bottom plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical damage:\u003c\/strong\u003e Face cracks, cracks from the side fixing holes, snapped lower tabs, gouges in the ridge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X front cover; T60X front cover shell; Talos T60X front panel; T60X nose cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Front Shell Module, not the Front Shell Bottom Plate, not a rear cover, not a complete shell set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Talos T60X front cover shell replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X front cover\u003c\/p\u003e\n\u003cp\u003eT60X front cover shell\u003c\/p\u003e\n\u003cp\u003eTalos T60X front panel\u003c\/p\u003e\n\u003cp\u003eT60X front cover outer shell\u003c\/p\u003e\n\u003cp\u003eTalos T60X nose cover\u003c\/p\u003e\n\u003cp\u003eT60X front cover cracked\u003c\/p\u003e\n\u003cp\u003eT60X front cover panel not flush\u003c\/p\u003e\n\u003cp\u003eDJI T60X front cover part\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell panel\u003c\/p\u003e\n\u003cp\u003eT60X branch strike repair\u003c\/p\u003e\n\u003cp\u003eTalos T60X front face panel\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell of Front Cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X Front Shell of Front Cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Front Shell of Front Cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell of front cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X body shell parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X airframe parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003espray drone cover replacement\u003c\/p\u003e\n\u003cp\u003eagricultural drone front cover\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI OEM spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell of Front Cover Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Talos T60X Front Shell of Front Cover?\u003c\/strong\u003e The closed, grey outer panel at the front of the T60X: a solid face with a raised centre ridge, a side wing each side with one fixing hole, and two tabs on its lower edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the name so long?\u003c\/strong\u003e Because it is an address. Front is the end of the aircraft, cover is the assembly, shell is the outer skin of that assembly. It separates this panel from the Front Shell Module and the Front Shell Bottom Plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is listed by the supplier for the Talos T60X. Compare it with the panel you removed: outline, ridge, side holes and lower tabs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit other DJI spray aircraft?\u003c\/strong\u003e It is listed for the Talos T60X only. We do not offer it for any other aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the Front Shell Module?\u003c\/strong\u003e No. The module is the open structure behind the front of the aircraft, with two round openings at its lower corners. This panel is the closed outer face. They are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the screws included?\u003c\/strong\u003e No. The panel is supplied on its own. Reuse sound screws, or replace any that are bent or have damaged heads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy new panel will not sit flush. Is it the wrong part?\u003c\/strong\u003e Check the Front Shell Module behind it first. A panel that matches the old one but needs force to reach its holes is usually sitting on a module that moved in the same impact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe panel is scuffed but not cracked. Should I replace it?\u003c\/strong\u003e Not for scuffs alone. Replace it for cracks, a damaged fixing hole, a broken tab, or a gouge through the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a cracked front cover cause an error on the remote controller?\u003c\/strong\u003e No. It has no wiring and nothing monitors it. A cracked panel lets residue and wash water in at the front of the aircraft and can work loose at its fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere do cracks usually start?\u003c\/strong\u003e At the side fixing holes and the roots of the lower tabs. Check the back face too; cracks often begin there before they show on the front.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Remove the two side screws, free the lower tabs, engage the new tabs first, then start both screws by hand and tighten evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the screws?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the panel is held firmly; over-tightening can crack the panel at the hole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. The panel is replaced when it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM airframe shell component, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68048377938240,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-front-shell-of-front-cover-1.png?v=1793966908","url":"https:\/\/aresacres.com\/es\/products\/dji-talos-t60x-oem-front-shell-of-front-cover","provider":"Ares Acres","version":"1.0","type":"link"}