{"product_id":"dji-talos-t60x-oem-front-shell-top-cover","title":"DJI Talos T60X OEM Front Shell Top Cover","description":"\u003cp\u003eThe DJI Talos T60X OEM Front Shell Top Cover is the grey moulded panel that closes the top of the front shell on the Talos T60X. The product images show a wide panel with one large round opening taking up most of its face, a fixing hole near each upper corner, side walls that angle outward into a flared lower skirt, and three short tabs along its bottom edge. It is an airframe shell component with no wiring or electronics of its own. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X front top cover, front shell cover or top shell panel after a fixing corner has torn out, after a crack has run in from the edge of the round opening, or after a transport or landing knock has bent the skirt out of line with the shell around it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by outline, round opening, fixing holes and bottom tabs against the cover you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM airframe shell component, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A square-on photograph of the old cover, showing the opening, both fixing corners and the bottom tabs, is all the match needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Front Shell Top Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne panel, one position.\u003c\/strong\u003e The cover replaces the top panel of the front shell. It is not the whole front shell and it is not a set of front shell panels.\u003c\/p\u003e\n\u003cp\u003eNot included: screws or other fixings, the Front Shell Module, the Front Shell of Front Cover, the Front Shell Bottom Plate, and anything that sits in or behind the round opening. Those are separate parts or stay with the aircraft.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the bare grey cover and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe front shell of the Talos T60X is built from several mouldings rather than one. The Front Shell Module is the open structure that gives the nose its shape, the Front Shell of Front Cover is the closed outer panel with the raised centre ridge, and the Front Shell Bottom Plate closes the underside. The Front Shell Top Cover is the panel on top, and it is the only one of them with a single large round opening through its face.\u003c\/p\u003e\n\u003cp\u003eThat opening is the first thing to check against the part you removed. In the product images it is a clean circle taking up most of the panel's width and reaching almost to the top edge. A panel with a closed face, a centre ridge, an oval opening or a row of rectangular openings is a different part; the Power Distribution Board Upper Cover, for example, is also grey and also has an opening, but its opening is oval and it sits over the power distribution board, not on the front shell.\u003c\/p\u003e\n\u003cp\u003eAround the opening the cover is simple: a flat upper section with a fixing hole near each corner, side walls that angle outward toward the bottom, a flared skirt, and three short tabs along the lower edge that locate it against the shell below. It carries no wiring and no electronics. Its work is to close the top of the front shell, keep the outline of the nose continuous, and keep spray, dust and wash water out of the space underneath.\u003c\/p\u003e\n\u003cp\u003eWhat the top cover lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray drift and residue settling on the top of the nose on every flight\u003c\/li\u003e\n\u003cli\u003eSunlight on its upper face whenever the aircraft is parked outside\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system, carried through its two fixing corners\u003c\/li\u003e\n\u003cli\u003eHands and tools resting on the nose during tank and battery changes\u003c\/li\u003e\n\u003cli\u003eKnocks from loading, transport straps and storage racks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is almost always mechanical: a fixing corner that has torn through, a crack that starts at the edge of the round opening, a tab that has snapped off the bottom edge, or a skirt that has been bent out of line. The panel does not wear out in normal use. It is replaced when it can no longer be held in its place, or no longer closes the shell around it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe top cover's engineering role is to close the top of the front shell and keep its outline continuous. It does that in three ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating\u003c\/strong\u003e — the three bottom tabs set the cover's position against the shell below\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding\u003c\/strong\u003e — the two fixing corners clamp the cover down so it cannot lift or rattle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosing\u003c\/strong\u003e — the panel and skirt shut the gap between the front shell pieces around it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe geometry of the panel decides where it is strong and where it is not. The round opening is large, and it reaches almost to the top edge, so the band of material across the top of the panel, between the two fixing corners, is the narrowest part of the whole cover. The fixing corners sit at the two ends of that band. Every load that reaches the cover through its fixings passes along it.\u003c\/p\u003e\n\u003cp\u003eWhat the top cover does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not carry structural load for the airframe; the frame tubes and the Front Shell Module do that\u003c\/li\u003e\n\u003cli\u003eIt does not hold any electronics, sensors or wiring\u003c\/li\u003e\n\u003cli\u003eIt does not seal the front shell against water by itself; it closes the top, and the rest of the shell closes the rest\u003c\/li\u003e\n\u003cli\u003eIt does not straighten a front shell that has been distorted in an impact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the narrow band above the opening is where the cover gives way\u003c\/h2\u003e\n\u003cp\u003eMost top covers that need replacing tell you so plainly: a corner is missing, a tab is gone, or the panel is lifting at one side. The cover worth inspecting closely is the one that still looks fitted, because the failure that matters starts in the one place a quick look misses.\u003c\/p\u003e\n\u003cp\u003eThat place is the narrow band of material across the top of the cover, above the round opening. The opening takes most of the panel, so the band is thin, and both fixing corners pull on it. A crack that starts at a fixing hole or at the top of the opening only has a short distance to run before it separates the band. Once it does, one fixing corner is no longer connected to the rest of the cover, and the panel is held at one corner and its tabs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect the band first:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the top of the cover so a hairline is not hidden under residue\u003c\/li\u003e\n\u003cli\u003eLook along the band from each fixing hole toward the top of the opening\u003c\/li\u003e\n\u003cli\u003eLook at the top edge of the opening, where the band is at its narrowest\u003c\/li\u003e\n\u003cli\u003ePress gently down on each fixing corner in turn and watch whether the band flexes more on one side than the other\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThen inspect the rest of the cover:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach fixing hole: round and clean, or elongated, split or torn toward the edge\u003c\/li\u003e\n\u003cli\u003eThe three bottom tabs: present, straight and seating into the shell below\u003c\/li\u003e\n\u003cli\u003eThe side walls and skirt: in line with the shell around them, with no fold or whitened crease\u003c\/li\u003e\n\u003cli\u003eThe edge of the round opening all the way round: smooth, or chipped and cracked\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point away from the cover:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe cover is intact but will not sit flat — check whether the Front Shell Module beneath it has been distorted\u003c\/li\u003e\n\u003cli\u003eThe cover rattles but both corners and all tabs are sound — check that the fixings are present and the holes they thread into are not stripped\u003c\/li\u003e\n\u003cli\u003eThere is a gap at the front of the nose — check the Front Shell of Front Cover, which closes that face\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect the band, the corners and the tabs first, while that information is still cheap. They decide whether you need a new top cover, a different front shell part, or only a set of fixings.\u003c\/p\u003e\n\u003cp\u003eA cover with a crack through the band above the opening is finished, even if it still sits in place. A cover with a light surface scuff and every corner and tab intact is not.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the front shell top cover when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack across the narrow band above the round opening\u003c\/li\u003e\n\u003cli\u003eA fixing hole that is torn through to the edge, split, or elongated so the fixing no longer clamps\u003c\/li\u003e\n\u003cli\u003eA bottom tab that is snapped off or bent so it no longer locates the cover\u003c\/li\u003e\n\u003cli\u003eA crack running outward from the edge of the round opening\u003c\/li\u003e\n\u003cli\u003eA side wall or skirt that is folded, creased white, or bent out of line with the shell around it\u003c\/li\u003e\n\u003cli\u003eA cover that lifts at one corner even with sound fixings fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Front Shell Module, which the cover sits on and which sets its position\u003c\/li\u003e\n\u003cli\u003eThe fixings and the holes they thread into\u003c\/li\u003e\n\u003cli\u003eThe Front Shell of Front Cover and the Front Shell Bottom Plate, which close the rest of the nose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the front shell top cover. It is replaced when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell Top Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — front shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Front shell top cover (single panel)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e Grey moulded panel with one large round opening, a fixing hole near each upper corner, flared skirt and three bottom tabs, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the cover carries no wiring or electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Top of the front shell; compare with the cover you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Located by its bottom tabs and held by fixings at its two upper corners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — fixings are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the front of the aircraft so residue does not fall into the shell when the cover comes off\u003c\/li\u003e\n\u003cli\u003ePhotograph the cover in place from above and from each side, showing both fixing corners and how the skirt meets the shell\u003c\/li\u003e\n\u003cli\u003eCompare the new cover with the old one: round opening, fixing holes, side walls, skirt and the three bottom tabs\u003c\/li\u003e\n\u003cli\u003eCheck the Front Shell Module underneath for cracks or distortion once the old cover is off, so the new one goes onto a sound base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the fixings at the two upper corners and keep them together\u003c\/li\u003e\n\u003cli\u003eLift the cover upward and away, easing the bottom tabs out of their seats rather than levering on the band above the opening\u003c\/li\u003e\n\u003cli\u003eClean the seating surfaces and tab locations on the shell below\u003c\/li\u003e\n\u003cli\u003eSet the new cover's three bottom tabs into their seats first, then lower the upper corners into place\u003c\/li\u003e\n\u003cli\u003eFit the fixings at both corners and tighten them evenly, alternating sides; DJI does not publish a torque figure for them, so stop when the cover is held firmly and do not over-tighten into the narrow band\u003c\/li\u003e\n\u003cli\u003eConfirm the skirt sits in line with the shell on both sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress gently on each corner and confirm the cover does not lift or rattle\u003c\/li\u003e\n\u003cli\u003eLook along the nose from the side and confirm the cover follows the line of the shell\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight and listen for any new rattle from the nose\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the top of the nose at the end of a spray day so residue does not hide a crack in the band above the opening. Keep tools and full containers off the top of the nose; the cover is a closing panel, not a shelf, and loads pressed onto it go straight into its two fixing corners.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe front shell top cover is for operators and technicians restoring the front shell of the Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators with a top cover cracked across the band above its opening\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators with a fixing corner torn out or a bottom tab snapped off\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors keeping a fleet's front shells closed against spray and wash water\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding a front shell after a nose impact\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking spare shell panels for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe panel you removed has a closed face with a raised centre ridge — that is the Front Shell of Front Cover\u003c\/li\u003e\n\u003cli\u003eThe part you removed is the open frame-shaped moulding the panels fit onto — that is the Front Shell Module\u003c\/li\u003e\n\u003cli\u003eThe panel you removed is from the underside of the nose — that is the Front Shell Bottom Plate\u003c\/li\u003e\n\u003cli\u003eThe cover you removed has an oval opening and sits over the power distribution board — that is the Power Distribution Board Upper Cover\u003c\/li\u003e\n\u003cli\u003eThe cover is sound and only the fixings are missing — replace the fixings\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this cover is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe top cover is a light panel with a large hole in it, and that is exactly why its weak point is predictable. The round opening takes most of the face and reaches almost to the top edge, so the band of material above it, between the two fixing corners, carries every load that comes through the fixings.\u003c\/p\u003e\n\u003cp\u003eA cover can hold in that state for a while. A crack through the band does not make the panel fall off; it leaves it held at one corner and three tabs, and it starts to move with every vibration from the propulsion system. The movement works the remaining corner and the tabs, and the next failure follows from the first.\u003c\/p\u003e\n\u003cp\u003eThat is why the inspection starts at the band and the corners, not at the surface. A scuffed cover with sound corners is doing its job. A clean-looking cover with a hairline across the band is not, and it is the one to replace.\u003c\/p\u003e\n\u003cp\u003eGetting the right panel matters as much as replacing the damaged one. The front shell is several mouldings, and three of them are grey panels that sit close together. The round opening, the two upper fixing corners and the three bottom tabs identify the top cover; anything else is a different part.\u003c\/p\u003e\n\u003cp\u003eCheck the band, confirm the shape, fit the cover onto a sound Front Shell Module, and tighten the corners evenly. That closes the top of the nose and keeps it closed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Front Shell Top Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Front shell top cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — front shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Top of the front shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Closes the top of the front shell and keeps the outline of the nose continuous\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the cover you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Fixings, Front Shell Module, Front Shell of Front Cover, Front Shell Bottom Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdentifying features:\u003c\/strong\u003e One large round opening, fixing hole near each upper corner, flared skirt, three bottom tabs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions, weight and material:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeak point:\u003c\/strong\u003e The narrow band of material above the round opening, between the two fixing corners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Inspect the band above the opening and both fixing corners before the surface\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the damaged panel has a closed face, an oval opening, or is the frame-shaped Front Shell Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM airframe shell component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X front top cover; T60X front shell cover; Talos top shell panel; T60X nose top cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Front Shell Module, not the Front Shell of Front Cover, not the Power Distribution Board Upper Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X front shell top cover\u003c\/p\u003e\n\u003cp\u003eT60X front top cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X top cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell cover\u003c\/p\u003e\n\u003cp\u003eT60X top shell panel\u003c\/p\u003e\n\u003cp\u003eTalos T60X nose cover\u003c\/p\u003e\n\u003cp\u003eT60X front cover cracked\u003c\/p\u003e\n\u003cp\u003eTalos T60X top cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos front shell panel\u003c\/p\u003e\n\u003cp\u003eT60X front shell top panel\u003c\/p\u003e\n\u003cp\u003eTalos T60X shell cover with round opening\u003c\/p\u003e\n\u003cp\u003eT60X top cover fixing corner broken\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X front shell parts\u003c\/p\u003e\n\u003cp\u003eTalos T60X body shell top cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell Top Cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Front Shell Top Cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X front shell top cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X airframe parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X body shell parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone shell cover\u003c\/p\u003e\n\u003cp\u003espray drone front cover replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Front Shell Top Cover Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X front shell top cover?\u003c\/strong\u003e The grey panel that closes the top of the front shell. It has one large round opening, a fixing hole near each upper corner, a flared skirt and three tabs along its bottom edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the whole front shell?\u003c\/strong\u003e No. It is the top panel only. The Front Shell Module, the Front Shell of Front Cover and the Front Shell Bottom Plate are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tell it apart from the Front Shell of Front Cover?\u003c\/strong\u003e The top cover has a large round opening through its face. The Front Shell of Front Cover is a closed panel with a raised ridge down its centre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the power distribution board cover?\u003c\/strong\u003e No. The Power Distribution Board Upper Cover has an oval opening and sits over the power distribution board. The top cover has a round opening and sits on the front shell.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does a top cover usually crack?\u003c\/strong\u003e Across the narrow band above the round opening, between the two fixing corners. The opening reaches almost to the top edge, so that band is the thinnest part of the panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy cover still sits in place but has a crack. Should I replace it?\u003c\/strong\u003e Yes, if the crack runs across the band above the opening or through a fixing corner. The cover is then held at one corner and starts to move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is only scuffed. Does it need replacing?\u003c\/strong\u003e No. A surface scuff with both fixing corners and all three tabs intact is cosmetic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Fixings are not included. Reuse sound fixings from the old cover or replace them separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe new cover will not sit flat. What is wrong?\u003c\/strong\u003e Check the Front Shell Module underneath. A distorted base will not let a straight cover sit flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes anything come with the round opening, such as a grille or lens?\u003c\/strong\u003e No. The cover is supplied bare. Anything that sits in or behind the opening stays with the aircraft or is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Remove the two corner fixings, ease the tabs out, set the new cover's tabs first, then fit and tighten both corners evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the fixings?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly, alternating corners, and stop when the cover is held firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. Inspect the band above the opening after impacts and replace the cover when it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM airframe shell component, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68055425974592,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-front-shell-top-cover-1.png?v=1794094884","url":"https:\/\/aresacres.com\/es\/products\/dji-talos-t60x-oem-front-shell-top-cover","provider":"Ares Acres","version":"1.0","type":"link"}