{"product_id":"dji-talos-t60x-oem-spray-tank-liquid-level-gauge","title":"DJI Talos T60X OEM Spray Tank Liquid Level Gauge","description":"\u003cp\u003eThe DJI Talos T60X OEM Spray Tank Liquid Level Gauge is a white moulded spray-tank part from the Talos T60X spraying system: the gauge piece that sits at the tank where the liquid level is read. In the product images it is a light-coloured plastic body with a curved upper hook, two short pegs on one side, a box-shaped centre section and a round white tube that leaves the body through a dark ring and runs out to a closed, rounded end. The photograph shows no lead, no wiring and no electrical connector on it, which is the first thing that separates it from the Liquid Level Gauge Sensor Module, the wired sensor that reports the tank level to the aircraft. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X tank level gauge, spray tank gauge or level gauge holder after a tank has been dropped, after a broken peg or hook has left the gauge loose at the tank, or after a tank strip-down has turned up a cracked moulding.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by hook, pegs, centre body and tube against the gauge you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spray-tank gauge component, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old gauge laid next to the new one, with the pegs and hook visible, settles the match faster than any description.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Spray Tank Liquid Level Gauge, the white moulded gauge as photographed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne moulded gauge, supplied on its own.\u003c\/strong\u003e The hook, the pegs, the centre body and the tube are one part as photographed.\u003c\/p\u003e\n\u003cp\u003eNot included: the Liquid Level Gauge Sensor Module (the wired sensor with its lead and connector), the spray tank, any seal, grommet, screw or clip, and any spraying-system cable. Those are separate parts and are listed separately.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the moulded gauge and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe spray tank liquid level gauge is the moulded piece at the tank that belongs to the level-reading position. It is the mechanical half of that position: a white plastic part shaped to locate on the tank, with a hook and two pegs that fix where it sits and a round tube that reaches out from the body.\u003c\/p\u003e\n\u003cp\u003eOn the Talos T60X the gauge is light-coloured so it sits against the white tank moulding, and it is shaped rather than flat. The curved hook rises from one end of the body, the two pegs project from the same side, and the tube leaves the body through a dark ring partway along its length. Each of those features is a locating or joining feature, which is why a broken one matters even when the rest of the part looks sound.\u003c\/p\u003e\n\u003cp\u003eThere are two parts on the Talos T60X whose names start with the words liquid level gauge, and they are not the same thing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray Tank Liquid Level Gauge\u003c\/strong\u003e — the white moulded gauge piece in the photograph: no lead, no connector, nothing electrical visible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid Level Gauge Sensor Module\u003c\/strong\u003e — the wired sensor with a round sensor head, a long thin lead and a sealed connector that plugs into the spraying-system wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhich one you need follows from what you took off the aircraft. If the part in your hand has a lead and a plug, it is the sensor module. If it is a white plastic moulding with pegs, a hook and a tube, it is this gauge.\u003c\/p\u003e\n\u003cp\u003eWhat the gauge lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray mixes and fertiliser solutions at the tank, and the residue they leave when a tank stands\u003c\/li\u003e\n\u003cli\u003eTank removal and refitting, which loads the hook and pegs each time the tank is handled\u003c\/li\u003e\n\u003cli\u003eKnocks to the tank during loading, transport and landing\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system, carried into the tank and everything fixed to it\u003c\/li\u003e\n\u003cli\u003eSunlight on the white moulding when the aircraft is parked in the open\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is almost always mechanical: a snapped peg, a cracked or broken hook, a split at the ring where the tube leaves the body, or a moulding that has cracked after the tank was dropped. Each of those is visible once the gauge is cleaned and looked at in good light.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe gauge's engineering role is to hold the tank's level-reading position in the right place. It does that in three ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating\u003c\/strong\u003e — the hook and the two pegs fix where the gauge sits on the tank and stop it turning or sliding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding shape\u003c\/strong\u003e — the moulded body keeps the tube and the centre section in a fixed relationship to the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoining\u003c\/strong\u003e — the dark ring marks the joint where the tube meets the body, which has to stay closed and whole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat is the whole of what can be said from the photograph and the name. The gauge is a shaped plastic part; it carries no wiring that can be seen and has no connector. The electrical tank-level reading the aircraft shows comes from the wired Liquid Level Gauge Sensor Module.\u003c\/p\u003e\n\u003cp\u003eBecause it is a locating part, its condition is judged by fit rather than by a reading. A gauge with every peg and the hook intact sits where it was designed to sit; a gauge with one peg gone sits almost there, and almost there is a different position.\u003c\/p\u003e\n\u003cp\u003eWhat the gauge does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not report the tank level to the aircraft by itself; there is no lead or connector on it\u003c\/li\u003e\n\u003cli\u003eIt does not move liquid, open a valve or set the flow rate\u003c\/li\u003e\n\u003cli\u003eIt does not seal a tank fitting unless the seal that belongs there is also present and sound\u003c\/li\u003e\n\u003cli\u003eIt does not repair a wired level sensor whose lead is cut or whose connector is damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the part with the plug and the part without one are two different orders\u003c\/h2\u003e\n\u003cp\u003eA level-reading problem at the spray tank sends most people looking for something called a liquid level gauge, and on the Talos T60X there are two parts with that phrase in their name. The most common wrong order at this position is the right name and the wrong part.\u003c\/p\u003e\n\u003cp\u003eThe way through it is to decide what has actually failed before choosing a part. A level problem has two kinds of cause: something electrical, where the reading is wrong or missing, and something mechanical, where the gauge piece at the tank is broken, loose or out of place. They lead to different parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fault pattern that points at this moulded gauge:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA peg or the hook on the white gauge is snapped, cracked or missing\u003c\/li\u003e\n\u003cli\u003eThe gauge moves or rocks at the tank when it should be held firm\u003c\/li\u003e\n\u003cli\u003eThe moulding is split, often at the dark ring where the tube leaves the body\u003c\/li\u003e\n\u003cli\u003eThe tank was dropped or struck and the gauge took the knock\u003c\/li\u003e\n\u003cli\u003eA level reading that wanders started at the same time as a loose or broken gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe fault pattern that points at the wired sensor module instead:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe level reading is missing or frozen while every moulded part at the tank is whole and firm\u003c\/li\u003e\n\u003cli\u003eThe lead is cut, crushed or pulled out, or the connector has bent or corroded pins\u003c\/li\u003e\n\u003cli\u003eThe aircraft reports an empty tank with liquid still in it and the gauge piece is undamaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect in this order:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrain and rinse the tank so you can see the gauge clearly\u003c\/li\u003e\n\u003cli\u003eLook at the hook, both pegs and the ring joint in good light, and run a fingernail over any line that might be a crack\u003c\/li\u003e\n\u003cli\u003ePress gently on the gauge where it sits; it should not rock or shift\u003c\/li\u003e\n\u003cli\u003eFollow the wired sensor's lead and look into its connector, so the electrical side is cleared at the same time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the moulding is damaged, this gauge is the part. If the moulding is whole and firm and the problem is the reading itself, the Liquid Level Gauge Sensor Module is the part to look at. Settling that first, while that information is still cheap, is what stops the wrong one arriving.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the gauge when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA snapped, cracked or missing peg\u003c\/li\u003e\n\u003cli\u003eA cracked or broken hook\u003c\/li\u003e\n\u003cli\u003eA split or crack at the dark ring where the tube meets the body\u003c\/li\u003e\n\u003cli\u003eA cracked centre body, often after the tank has been dropped\u003c\/li\u003e\n\u003cli\u003eA gauge that rocks, turns or slides at the tank with its locating features in place\u003c\/li\u003e\n\u003cli\u003eA tube that is cracked, crushed or no longer straight\u003c\/li\u003e\n\u003cli\u003eChemical staining that has left the moulding brittle or chalky\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they produce similar complaints:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Liquid Level Gauge Sensor Module, its lead and its connector\u003c\/li\u003e\n\u003cli\u003eAny seal or grommet that sits with the gauge at the tank\u003c\/li\u003e\n\u003cli\u003eThe tank moulding around the gauge position, which can crack in the same knock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the gauge. It is inspected with the tank and replaced when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Spray Tank Liquid Level Gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying system — spray tank, level-reading position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Spray tank liquid level gauge (moulded gauge piece)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e White moulding with curved hook, two pegs, box-shaped centre body and round tube joined through a dark ring, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None visible in the product images — no lead and no connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None — the wired level reading comes from the Liquid Level Gauge Sensor Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e At the spray tank, in the level-reading position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Located by its hook and pegs at the tank in the same position and orientation as the part removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — seals, grommets, screws and clips are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spray-tank gauge component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eDrain the spray tank, rinse it with clean water and let it drip dry\u003c\/li\u003e\n\u003cli\u003ePhotograph the gauge in place from two sides, showing the hook, both pegs and which way the tube points\u003c\/li\u003e\n\u003cli\u003eNote which parts sit with the gauge at the tank, including any seal, grommet or wired sensor, and photograph them too\u003c\/li\u003e\n\u003cli\u003eLay the new gauge beside the old one on the bench and compare the hook, the pegs, the centre body and the tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease any clip or fastener holding the old gauge and keep it; fasteners are not included\u003c\/li\u003e\n\u003cli\u003eEase the old gauge off its hook and pegs without levering against the tank moulding\u003c\/li\u003e\n\u003cli\u003eClean the seat on the tank and look for cracks in the tank around it\u003c\/li\u003e\n\u003cli\u003eIf the wired level sensor sits with the gauge, move it aside without pulling on its lead\u003c\/li\u003e\n\u003cli\u003eFit the new gauge in the same position and orientation as the old one, hook and pegs fully home\u003c\/li\u003e\n\u003cli\u003eRefit any seal or grommet that belongs with it so the tank stays sealed\u003c\/li\u003e\n\u003cli\u003eRefit the fastener or clip and confirm the gauge no longer rocks or turns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the wired level sensor's lead is not pinched by the new gauge\u003c\/li\u003e\n\u003cli\u003eFill the tank with clean water and look for seepage around the gauge position\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no tank-level warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eDrain the water and watch the level reading fall with it\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the tank at the end of every spray day and do not leave mixes standing in it. Look at the gauge's pegs and hook whenever the tank is off; a crack found on the bench is a part fitted on the bench rather than a part fitted in the field.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe gauge is for operators and technicians putting the Talos T60X spray tank back to its original fit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators with a cracked, loose or broken gauge at the spray tank\u003c\/li\u003e\n\u003cli\u003eOperators rebuilding a tank after a drop or a hard landing\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors keeping spare tank parts on the trailer\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians stripping and rebuilding spraying systems\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking the small mouldings that stop an aircraft for want of one piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe part you took off has a lead and a connector — that is the Liquid Level Gauge Sensor Module\u003c\/li\u003e\n\u003cli\u003eThe level reading is missing or wrong and every moulded part at the tank is whole and firm — look at the wired sensor\u003c\/li\u003e\n\u003cli\u003eThe tank itself is cracked — the tank is a separate part\u003c\/li\u003e\n\u003cli\u003eYou need a seal or grommet at the tank — those are separate parts\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this gauge is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe usual setback at this position is not the part itself. It is the second order: the wired sensor module arrives for a broken moulding, or the moulding arrives for a dead sensor, and the aircraft waits for the one that was actually needed.\u003c\/p\u003e\n\u003cp\u003eThat happens because the two parts share most of a name and sit at the same place on the tank. The difference between them is not subtle once you look: one has a lead and a plug, and the other is a white plastic moulding with a hook, two pegs and a tube. Looking takes a few seconds; the wrong part takes days.\u003c\/p\u003e\n\u003cp\u003eWhen the moulding is the fault, it matters more than its size suggests. A gauge with a missing peg sits close to its position rather than in it, and a gauge that can move at the tank is a gauge that will keep moving under vibration until something else is chafed or cracked.\u003c\/p\u003e\n\u003cp\u003eSo the honest advice is simple. Take the part off, look at it, and order the one that matches. If it is the white moulding with the hook, pegs and tube, it is this gauge. If it has a lead and a connector, it is the sensor module, and this gauge will not help.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Spray Tank Liquid Level Gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Spray tank liquid level gauge (moulded gauge piece)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e At the spray tank, in the level-reading position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Locates and holds the level-reading position at the spray tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the gauge you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e White moulding with hook, two pegs, centre body and tube through a dark ring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None visible — no lead, no connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Liquid Level Gauge Sensor Module, spray tank, seals, grommets, screws, clips\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey distinction:\u003c\/strong\u003e The moulded gauge has no lead or plug; the Liquid Level Gauge Sensor Module does\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst check:\u003c\/strong\u003e Look at what you removed: lead and plug means sensor module, white moulding means this gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical damage:\u003c\/strong\u003e Snapped peg, cracked hook, split at the ring joint, cracked body after a tank drop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spray-tank gauge component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X tank level gauge; Talos T60X level gauge holder; T60X spray tank gauge; Talos tank gauge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Liquid Level Gauge Sensor Module, not a flow meter, not a weight sensor, not the spray tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X spray tank liquid level gauge\u003c\/p\u003e\n\u003cp\u003eT60X tank level gauge\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X level gauge\u003c\/p\u003e\n\u003cp\u003eTalos T60X level gauge holder\u003c\/p\u003e\n\u003cp\u003eT60X spray tank gauge replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X tank gauge broken peg\u003c\/p\u003e\n\u003cp\u003eT60X level gauge cracked\u003c\/p\u003e\n\u003cp\u003eTalos T60X spray tank parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos tank level gauge\u003c\/p\u003e\n\u003cp\u003eT60X tank gauge moulding\u003c\/p\u003e\n\u003cp\u003eTalos T60X level gauge vs level sensor\u003c\/p\u003e\n\u003cp\u003eT60X spray tank gauge hook\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Spray Tank Liquid Level Gauge\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Spray Tank Liquid Level Gauge\u003c\/p\u003e\n\u003cp\u003eTalos T60X spray tank liquid level gauge replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X spraying system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X spray tank parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone tank parts\u003c\/p\u003e\n\u003cp\u003espray drone level gauge replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Spray Tank Liquid Level Gauge Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X spray tank liquid level gauge?\u003c\/strong\u003e A white moulded gauge piece that sits at the spray tank in the level-reading position, with a hook, two pegs, a centre body and a tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as the Liquid Level Gauge Sensor Module?\u003c\/strong\u003e No. The sensor module is the wired sensor with a lead and a connector. This gauge is the white moulding, with no lead or connector visible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know which one I need?\u003c\/strong\u003e Look at the part you removed. A lead and a plug means the sensor module. A white plastic moulding with pegs and a hook means this gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy tank level reading is missing. Will this gauge fix it?\u003c\/strong\u003e Only if the gauge is broken or loose. If the moulding is whole and firm, the missing reading points at the wired sensor module, its lead or its connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the gauge have wiring?\u003c\/strong\u003e None is visible in the product images. There is no lead and no connector on it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne peg snapped off. Can I keep using it?\u003c\/strong\u003e A gauge with a missing peg sits near its position rather than in it, and it can move under vibration. Replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a seal included?\u003c\/strong\u003e No. Any seal, grommet, screw or clip at the tank is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drain the tank to change it?\u003c\/strong\u003e Yes. Drain and rinse the tank first so you are working on a clean, dry part and can see any crack in the tank around it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a dropped tank break the gauge?\u003c\/strong\u003e Yes. The hook, the pegs and the ring joint take the knock, and a dropped tank is the most common reason the gauge cracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a broken peg back on?\u003c\/strong\u003e A glued peg at the tank lives in spray mix and wash water and is a new place for the fault to return. Replace the gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Drain the tank, photograph the old gauge, fit the new one in the same orientation with its hook and pegs fully home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check it after fitting?\u003c\/strong\u003e Fill the tank with clean water, look for seepage around the gauge, and confirm the level reading rises and falls with no warnings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. Inspect it whenever the tank is off and replace it when it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM spray-tank gauge component, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68055430299968,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-spray-tank-liquid-level-gauge-1.png?v=1794094889","url":"https:\/\/aresacres.com\/es\/products\/dji-talos-t60x-oem-spray-tank-liquid-level-gauge","provider":"Ares Acres","version":"1.0","type":"link"}