{"product_id":"dji-talos-t60x-oem-weight-sensor-bracket-rear","title":"DJI Talos T60X OEM Weight Sensor Bracket (Rear)","description":"\u003cp\u003eThe DJI Talos T60X OEM Weight Sensor Bracket (Rear) is the black moulded bracket that holds a weight sensor at the rear of the Talos T60X payload weighing system. The product images show a rectangular bracket with two recessed fixing holes on either side of a slot cut down from its top edge, a round central boss below them, and two angled legs at the bottom, each with a moulded numeral 2. It is payload-system frame hardware: it carries no electronics of its own, but it decides where the weight sensor sits and how the load reaches it. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X rear weight sensor bracket, load sensor mount or weighing bracket after a hard landing has cracked a leg, after a fixing hole has split, or after the payload weight has started reading differently and the sensor itself has tested sound.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X, rear weighing position\u003c\/li\u003e\n\u003cli\u003eMatched by outline, fixing holes, central boss and leg markings against the bracket you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM payload-system frame hardware, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old bracket face-on, with its legs and any moulded markings visible, is all the match needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Weight Sensor Bracket (Rear)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne bracket, the rear position.\u003c\/strong\u003e The bracket replaces the one at the rear weighing position. It is not a set of brackets for every weighing point.\u003c\/p\u003e\n\u003cp\u003eNot included: the Weight Sensor Module, the Weight Sensor Signal Cable, the Weight Sensor Rubber Cover, screws or other fixings, and any payload or tank hardware. Those are separate parts.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the bare black bracket and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe Talos T60X weighs its payload through more than one weighing point. At each point a Weight Sensor Module sits between the payload and the airframe, and each sensor needs something to hold it in place. At the rear position that is this bracket.\u003c\/p\u003e\n\u003cp\u003eThe product images show what the bracket is built to do. Its upper half has two recessed fixing holes, one either side of a slot that runs down from the top edge, so it is clamped at two points. Below them is a round central boss with an opening into a pocket beneath. Its lower half divides into two legs that angle outward, each carrying a moulded numeral 2. The whole bracket is one black moulding.\u003c\/p\u003e\n\u003cp\u003eThe bracket carries no current and makes no measurement. Its role is geometric: it holds the sensor at a known position and angle so that the load passing through the weighing point goes through the sensor the way the sensor expects. A bracket that is cracked, twisted or loose changes that geometry, and the reading changes with it.\u003c\/p\u003e\n\u003cp\u003eWhat the rear weight sensor bracket lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe share of the payload load that passes through the rear weighing point on every flight\u003c\/li\u003e\n\u003cli\u003eShock loads from hard landings and rough take-offs with a full tank\u003c\/li\u003e\n\u003cli\u003eSpray mixes, fertiliser solutions and their residue in the payload area\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system, carried into the payload mounts\u003c\/li\u003e\n\u003cli\u003eTank and payload removal, which can knock or lever against it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is mechanical: a leg cracked or snapped in a hard landing, a fixing hole split by an over-tightened screw or an impact, the central boss cracked, or a bracket twisted so it no longer sits square. A bracket in that condition may still hold the sensor. It no longer holds it in the right place.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe bracket's engineering role is to locate the rear weight sensor. It does that in three ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing\u003c\/strong\u003e — the two recessed holes clamp the bracket to the aircraft at a set position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating\u003c\/strong\u003e — the central boss and the legs set where and at what angle the sensor sits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitting\u003c\/strong\u003e — the load at the rear weighing point passes through the bracket into the sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat last point is why the bracket matters to the weight reading. A weight sensor measures the load that reaches it along the direction it is built to measure. If the bracket holds it square, the rear share of the payload goes straight through the sensor. If the bracket has moved, part of that load can go around the sensor or reach it at an angle, and the sensor reports a different number for the same payload.\u003c\/p\u003e\n\u003cp\u003eWhat the bracket does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not measure anything; the Weight Sensor Module does\u003c\/li\u003e\n\u003cli\u003eIt does not carry the signal; the Weight Sensor Signal Cable does\u003c\/li\u003e\n\u003cli\u003eIt does not protect the sensor from wash water; that is the job of the Weight Sensor Rubber Cover\u003c\/li\u003e\n\u003cli\u003eIt does not hold the sensors at the other weighing points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a bracket that has moved changes the reading without touching the sensor\u003c\/h2\u003e\n\u003cp\u003eWhen the payload weight starts reading wrong, the natural suspect is the sensor. At the rear weighing point there is a second suspect that is easy to miss, because it has no wiring, no connector and nothing to test electrically: the bracket the sensor sits in.\u003c\/p\u003e\n\u003cp\u003eA bracket fails by geometry before it fails by breaking. A leg cracked at its root still stands. A fixing hole split by an impact still holds a screw. A bracket twisted a few degrees still clamps down. In each case the sensor is still there and still connected, but it is no longer held where it was. The rear share of the payload reaches it differently, and the total moves.\u003c\/p\u003e\n\u003cp\u003eThe tell is that the sensor tests sound and the error stays at the rear position. Swap the rear sensor with a sensor from another weighing point: if the error stays at the rear, the fault is not the sensor. It is the bracket, the fixings, the cable branch at that position, or the payload resting on something it should not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the rear weighing point in order:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmpty and rinse the tank, note the reading, add a known quantity of clean water and confirm the change\u003c\/li\u003e\n\u003cli\u003eSwap the rear sensor with one from another position and repeat; note whether the error moves or stays\u003c\/li\u003e\n\u003cli\u003eIf it stays, inspect the rear bracket: both legs at their roots, both fixing holes, the central boss\u003c\/li\u003e\n\u003cli\u003eCheck that both fixings are present and tight and that the bracket sits square on its mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point away from the bracket:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe error moves with the sensor when it is swapped — the sensor is the fault, not the bracket\u003c\/li\u003e\n\u003cli\u003eEvery weighing reading is missing at once — look at the Weight Sensor Signal Cable first\u003c\/li\u003e\n\u003cli\u003eThe payload is touching the frame or a shell — free it and test again\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRun the known-weight test and the swap first, while that information is still cheap. They take a tank of water and a few minutes, and they separate a bracket fault from a sensor fault.\u003c\/p\u003e\n\u003cp\u003eA rear bracket with a cracked leg or a split fixing hole should be replaced even if the reading is still close. Close is not the same as right, and a bracket that has started to move keeps moving.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the rear weight sensor bracket when inspection or testing confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack at the root of either leg, or a leg snapped off\u003c\/li\u003e\n\u003cli\u003eA fixing hole that is split, elongated or crushed so the bracket no longer clamps square\u003c\/li\u003e\n\u003cli\u003eA crack in or around the central boss\u003c\/li\u003e\n\u003cli\u003eA bracket that is twisted or no longer sits flat on its mounting with the fixings tight\u003c\/li\u003e\n\u003cli\u003eA known-weight error that stays at the rear position when the sensors are swapped, with the cable branch and fixings already checked\u003c\/li\u003e\n\u003cli\u003eWhitened stress marks in the moulding after a hard landing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Weight Sensor Module at the rear position\u003c\/li\u003e\n\u003cli\u003eThe rear branch of the Weight Sensor Signal Cable and its connector\u003c\/li\u003e\n\u003cli\u003eThe fixings and the mounting the bracket clamps to\u003c\/li\u003e\n\u003cli\u003eThe payload, to confirm it rests only on its weighing points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the weight sensor bracket. It is replaced when it is damaged or when testing shows it no longer holds the sensor true.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Bracket (Rear)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear weighing position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload system — weighing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Weight sensor bracket (frame hardware)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e Black moulded bracket with two recessed fixing holes beside a top slot, round central boss, and two angled legs each marked 2, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the bracket carries no wiring or electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Rear weighing point of the payload system; compare with the bracket you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Clamped through its two recessed fixing holes; holds the rear weight sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — fixings, sensor, cover and cable are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM payload-system frame hardware\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty and rinse the tank so the payload area is clean and unloaded\u003c\/li\u003e\n\u003cli\u003eRun the known-weight test and the sensor swap so you know the rear bracket is the fault\u003c\/li\u003e\n\u003cli\u003ePhotograph the rear weighing point in place, showing the bracket, the sensor, its cable branch and the fixings\u003c\/li\u003e\n\u003cli\u003eCompare the new bracket with the old one: outline, fixing holes, top slot, central boss, legs and their markings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnload the rear weighing point so the bracket is free of the payload before you release it\u003c\/li\u003e\n\u003cli\u003eDisconnect the rear sensor from its cable branch by the connector body, never by the lead\u003c\/li\u003e\n\u003cli\u003eRemove the fixings and lift the bracket and sensor out together, noting which way the legs faced\u003c\/li\u003e\n\u003cli\u003eTransfer the sensor to the new bracket in the same orientation, seated squarely with nothing under it\u003c\/li\u003e\n\u003cli\u003eClean the mounting surface so the new bracket sits flat\u003c\/li\u003e\n\u003cli\u003eFit the new bracket in the same orientation and tighten its fixings evenly; DJI does not publish a torque figure for them, so stop when it is held firmly and do not crush the recessed holes\u003c\/li\u003e\n\u003cli\u003eReconnect the sensor's cable branch and confirm it is fully seated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the payload rests on its weighing points and is not touching the frame or a shell\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eRepeat the known-weight test with clean water and confirm the reading changes by the right amount\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the test results in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the payload area at the end of a spray day so residue does not build up around the bracket and its sensor. After a hard landing with a full tank, look at the roots of both legs and both fixing holes, then repeat the known-weight test; a cracked leg is easiest to see when the bracket is clean.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe rear weight sensor bracket is for operators and technicians restoring the rear weighing point on the Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators with a rear bracket cracked or broken in a hard landing\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators whose known-weight error stays at the rear position after a sensor swap\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors who depend on the payload weight reading through the season\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding payload areas\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking spare payload hardware for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe error moves with the sensor when it is swapped — you need the Weight Sensor Module\u003c\/li\u003e\n\u003cli\u003eEvery weighing reading is missing at once — look at the Weight Sensor Signal Cable\u003c\/li\u003e\n\u003cli\u003eThe sensor is sound and only its protective rubber is split — you need the Weight Sensor Rubber Cover\u003c\/li\u003e\n\u003cli\u003eThe bracket you removed came from a weighing position other than the rear — match it to that position\u003c\/li\u003e\n\u003cli\u003eThe bracket is sound and only a fixing is missing — replace the fixing\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this bracket is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA weight sensor is only as accurate as the way it is held. The rear bracket holds the rear sensor, and it can change the reading without anything electrical being wrong.\u003c\/p\u003e\n\u003cp\u003eThat is the reason the bracket is worth suspecting. A cracked leg, a split fixing hole or a few degrees of twist all leave the sensor in place and connected. The rear share of the payload now reaches the sensor at an angle, or partly bypasses it, and the total weight moves for a reason no electrical test will find.\u003c\/p\u003e\n\u003cp\u003eThe sensor swap is what exposes it. When the error stays at the rear position after the sensors trade places, the sensor has been cleared and the bracket, its fixings and its cable branch are what remain. Of those, the bracket is the one that takes the impact in a hard landing.\u003c\/p\u003e\n\u003cp\u003eThe honest counterpoint matters too. When the error follows the sensor, a new bracket will not fix it; and when every reading drops out at once, the shared cable is the suspect. The bracket is the answer only when the test points to the rear position and the sensor has passed.\u003c\/p\u003e\n\u003cp\u003eTest, swap, inspect the bracket, replace it if it has moved, and test again. That puts the rear weighing point back where the sensor can measure it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Bracket (Rear)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Weight sensor bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear weighing position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload system — weighing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Holds the rear weight sensor at its position and angle so the load reaches it correctly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the bracket you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Weight Sensor Module, Weight Sensor Signal Cable, Weight Sensor Rubber Cover, fixings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdentifying features:\u003c\/strong\u003e Two recessed fixing holes beside a top slot, round central boss, two angled legs each marked 2\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions, weight and material:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A known-weight error that stays at the rear position after a sensor swap points at the bracket, its fixings or its cable branch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the error moves with the sensor, or every weighing reading is lost at once\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical damage:\u003c\/strong\u003e Cracked leg root, split fixing hole, cracked central boss, twisted bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM payload-system frame hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X rear weight sensor bracket; T60X load sensor mount; Talos weighing bracket; T60X rear sensor holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Weight Sensor Module, not the Weight Sensor Signal Cable, not the Weight Sensor Rubber Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X rear weight sensor bracket\u003c\/p\u003e\n\u003cp\u003eT60X weight sensor bracket\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X load sensor bracket\u003c\/p\u003e\n\u003cp\u003eTalos T60X weighing bracket\u003c\/p\u003e\n\u003cp\u003eT60X rear sensor mount\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor holder\u003c\/p\u003e\n\u003cp\u003eT60X weight reading wrong after hard landing\u003c\/p\u003e\n\u003cp\u003eTalos T60X payload weight error rear\u003c\/p\u003e\n\u003cp\u003eT60X weight sensor bracket cracked\u003c\/p\u003e\n\u003cp\u003eDJI Talos weight sensor mount\u003c\/p\u003e\n\u003cp\u003eTalos T60X weighing system bracket\u003c\/p\u003e\n\u003cp\u003eT60X rear weighing point\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor bracket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X payload hardware\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Weight Sensor Bracket (Rear)\u003c\/p\u003e\n\u003cp\u003eTalos T60X Weight Sensor Bracket (Rear)\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Weight Sensor Bracket (Rear)\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor bracket (rear) replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X payload system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X frame hardware\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone weight sensor bracket\u003c\/p\u003e\n\u003cp\u003espray drone load sensor mount\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Weight Sensor Bracket (Rear) Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X rear weight sensor bracket?\u003c\/strong\u003e The black moulded bracket that holds the weight sensor at the rear weighing point. It sets where the sensor sits and how the rear share of the payload reaches it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the weight sensor?\u003c\/strong\u003e No. The Weight Sensor Module is a separate part. The bracket is supplied bare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a bracket for every weighing point?\u003c\/strong\u003e No. It is the rear bracket, one piece for the rear weighing position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a bracket make the weight read wrong?\u003c\/strong\u003e Yes. A bracket that is cracked, twisted or loose holds the sensor at the wrong angle or lets load bypass it, and the reading moves even though the sensor is sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know it is the bracket and not the sensor?\u003c\/strong\u003e Swap the rear sensor with one from another position and repeat a known-weight test. If the error stays at the rear, the sensor is cleared and the bracket, its fixings and its cable branch remain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe error moved with the sensor. Do I need this bracket?\u003c\/strong\u003e No. The sensor is the fault. You need the Weight Sensor Module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll my weight readings disappeared together. Is it the bracket?\u003c\/strong\u003e Very unlikely. A bracket affects one weighing point. Look at the Weight Sensor Signal Cable and its main connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the numerals on the legs mean?\u003c\/strong\u003e The product images show a moulded numeral 2 on each leg. Compare the markings on the bracket you removed; the match is made against your part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the rubber cover included?\u003c\/strong\u003e No. The Weight Sensor Rubber Cover is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Fixings are not included. Reuse sound ones or replace them separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Unload the rear weighing point, move the sensor to the new bracket in the same orientation, fit the bracket, reconnect the cable branch and repeat the known-weight test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the fixings?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the bracket is held firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. Inspect the legs and fixing holes after hard landings and replace the bracket when it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is genuine DJI OEM payload-system frame hardware, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68055430234432,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-weight-sensor-bracket-rear-1.png?v=1794094889","url":"https:\/\/aresacres.com\/es\/products\/dji-talos-t60x-oem-weight-sensor-bracket-rear","provider":"Ares Acres","version":"1.0","type":"link"}