{"product_id":"xag-p100-oem-front-hood-rack","title":"XAG P100 OEM Front Hood Rack","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P100 OEM Front Hood Rack\u003c\/strong\u003e, XAG part number 02-001-08076, is the structural rack at the front of the original XAG P100 agricultural drone that supports and locates the front hood on the fuselage. It is the frame the nose cover sits on: it holds the hood in the right position so that it closes flush, latches with its clips and seals the forward electronics bay against spray, dust and rain. Operators reach it through searches such as P100 front hood rack, XAG P100 nose cover frame, P100 hood will not close, or XAG P100 front hood support.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P100 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eFitted at the nose of the original XAG P100 (2022); not confirmed for the P100 Pro\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 02-001-08076 and by mounting points and hood locating features against the rack you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM structural component, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × XAG P100 front hood rack, XAG part number 02-001-08076\u003c\/li\u003e\n\u003cli\u003eThe rack as XAG supplies it under this part number\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the front hood (05-002-01634), the front hood clips (rear 02-001-07397, front 02-001-07399), the fuselage front compartment frame (02-001-08157), the front rack (02-002-09969), or fasteners. Reuse sound original screws, or replace damaged ones by their own part numbers.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe front hood of a P100 is more than a cosmetic cover. It closes the forward electronics bay, protects the parts mounted in the nose from spray, dust, rain and debris, and takes the first contact in a nose strike. For it to do any of that, it has to sit in exactly the right place: flush with the fuselage, its edges meeting their seals, its clips engaging their catches with the right tension. The front hood rack is the part that puts it there.\u003c\/p\u003e\n\u003cp\u003eThe rack is a locating structure. It gives the hood its seating surfaces and its alignment features, and it carries the hood's weight and the loads that pass through it — airflow at speed, vibration through the airframe, and the levering force every time the hood is opened and closed. When the rack is true, the hood closes as if it were part of the fuselage. When the rack is not, every other part of the nose closure starts to fight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e At the front of the fuselage, part of the nose structure that the front hood rests on and latches to. It sits in the same area as the fuselage front compartment frame and the front rack, and it should not be confused with either.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The fuselage structure on one side, and the front hood — with its front and rear clips — on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Nose impacts, even minor ones, which push load straight into the rack. Repeated opening and closing, especially when the hood is levered or forced. Vibration over seasons. UV and chemical exposure. Overtightened fasteners that crack the mounting points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not the front hood itself, not the hood clips, not the front compartment frame and not the front rack. Each is a separate part with its own number, and a closure problem can sit in any one of them.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe front hood rack holds the nose cover in the position it was designed for, so that the cover seals, latches and survives the loads of flight.\u003c\/p\u003e\n\u003cp\u003eA sound rack provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect seating and alignment of the front hood on the fuselage\u003c\/li\u003e\n\u003cli\u003eFlush closure, so hood edges meet their sealing surfaces\u003c\/li\u003e\n\u003cli\u003eCorrect geometry for the front and rear hood clips to engage with the right tension\u003c\/li\u003e\n\u003cli\u003eSupport for the hood against airflow and vibration in flight\u003c\/li\u003e\n\u003cli\u003eA stable structure that spreads hood loads into the fuselage\u003c\/li\u003e\n\u003cli\u003eProtection of the forward electronics bay by keeping the closure tight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts success is invisible. A hood on a good rack closes, latches and stays put, and nobody thinks about why. A rack that has moved, cracked or warped shows itself through every other part of the nose: a hood that will not seat, clips that break, gaps where spray gets in.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a hood that will not close cleanly is telling you about the rack\u003c\/h2\u003e\n\u003cp\u003eWhen the front hood stops closing well, the usual reaction is to blame the hood or the clips, because that is where the struggle is felt. Often the hood and clips are fine, and they are struggling because the structure they sit on is no longer where it should be. Replacing clips on a distorted rack produces new clips that break the same way. Replacing the hood produces a new hood that sits as badly as the old one.\u003c\/p\u003e\n\u003cp\u003eThe way to tell is to look at the pattern of the problem, not the point where it is felt.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLook at the gaps.\u003c\/strong\u003e Close the hood and look along its edges. An even gap all round with one clip failing points at that clip. A gap that is wide on one side and tight on the other points at the hood sitting off-centre — the rack or its mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeel the closing force.\u003c\/strong\u003e A hood that needs to be pressed hard on one corner to latch, or springs up on one side, is being held out of position by something underneath it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck clip history.\u003c\/strong\u003e If the same clip has broken more than once, the clip is not the root cause. Something is loading it beyond its design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the rack directly.\u003c\/strong\u003e With the hood removed, look for cracks at mounting points and corners, white stress marks in the plastic, twist, and any section that sits differently from its mirror side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the mounting fasteners.\u003c\/strong\u003e A loose rack lets the whole hood shift. An overtightened one can crack at the screw boss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemember recent impacts.\u003c\/strong\u003e Even a gentle nose contact on landing or in transport can move the rack enough to change the hood's fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph the rack in place.\u003c\/strong\u003e Send us the photograph if you want the match confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the rack is sound and true, the problem is in the hood or a clip. If the rack is cracked, loose or distorted, fix it first — the other parts cannot sit correctly until it does.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eFront hood rack replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA front hood that will not sit flush or close evenly\u003c\/li\u003e\n\u003cli\u003eUneven gaps around the hood, wide on one side and tight on the other\u003c\/li\u003e\n\u003cli\u003eHood clips that break repeatedly in the same position\u003c\/li\u003e\n\u003cli\u003eCracks at the rack's mounting points, corners or locating features\u003c\/li\u003e\n\u003cli\u003eStress whitening or visible distortion in the rack\u003c\/li\u003e\n\u003cli\u003eA hood that lifts, rattles or vibrates in flight\u003c\/li\u003e\n\u003cli\u003eSpray, dust or water found inside the forward bay after work\u003c\/li\u003e\n\u003cli\u003eDamage after a nose impact, even when the hood itself survived\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are the consequences of where the rack lives: at the front, in the path of impacts, opened and closed often, and loaded by airflow and vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not rack symptoms, and this part will not fix them.\u003c\/strong\u003e A cracked or holed hood needs the front hood. A single broken clip on an otherwise well-seated hood needs that clip. Damage to the structure deeper in the nose may be the front compartment frame. A bent radar mount needs the dynamic radar bracket. None of those is the hood rack.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P100 OEM Front Hood Rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-001-08076\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P100 (2022, original P100)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P100 Pro\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Airframe, nose closure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Front hood support and locating rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Front of the fuselage, beneath and around the front hood\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Supports and locates the front hood for correct closure and latching\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 × rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial, dimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFasteners:\u003c\/strong\u003e Not included; reuse sound originals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Direct replacement on the existing mounting points\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the rack is true or it is not; no shim or setting compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM structural component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and power the aircraft down\u003c\/li\u003e\n\u003cli\u003eConfirm the old rack carries XAG part number 02-001-08076\u003c\/li\u003e\n\u003cli\u003ePhotograph the nose with the hood removed, showing the rack, cables and nearby parts\u003c\/li\u003e\n\u003cli\u003eNote any cables or components routed around the rack so they go back the same way\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the old rack without levering against electronics in the nose\u003c\/li\u003e\n\u003cli\u003eInspect the fuselage mounting points for cracks before fitting the new rack\u003c\/li\u003e\n\u003cli\u003eFit the new rack and tighten its fasteners evenly and firmly, without overtightening into plastic\u003c\/li\u003e\n\u003cli\u003eCheck that no cable is trapped between the rack and the fuselage\u003c\/li\u003e\n\u003cli\u003eInspect the hood clips; replace any that are cracked or weakened at the same time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFit the hood and check the gaps are even all round\u003c\/li\u003e\n\u003cli\u003eConfirm both clips latch with normal, even pressure\u003c\/li\u003e\n\u003cli\u003eDo a short hover and check the hood does not rattle or lift\u003c\/li\u003e\n\u003cli\u003eInspect the rack after any nose contact, and open the hood by its intended method, never by levering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe hood rack is a structural repair part for anyone whose nose closure has started to fight back.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P100 operators who have had a nose strike or a hard landing\u003c\/li\u003e\n\u003cli\u003eCrews who open the nose often for inspection and cleaning\u003c\/li\u003e\n\u003cli\u003eAerial applicators protecting forward electronics from spray and dust\u003c\/li\u003e\n\u003cli\u003eCustom application contractors transporting aircraft frequently\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres doing structural repairs on XAG aircraft\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e the hood itself is cracked, if a single clip has failed on a hood that otherwise sits flush, or if the damage is deeper in the nose structure. Check the gaps and the clip history first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your rack; this one is identified for the original P100.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe front hood rack is a geometry part. Its strength matters less than its shape, because its job is to put the hood in a precise place. A rack that has cracked but still holds, or twisted slightly but still supports the hood, is still doing the wrong job: it is holding the hood somewhere it was not designed to be.\u003c\/p\u003e\n\u003cp\u003eThe consequences spread outward. Clips are forced to latch against misalignment and break. Gaps open where seals should meet, and spray and dust find their way into the forward bay, where the electronics live. The hood vibrates at speed and wears at its edges. Each of those looks like its own problem, and each is fixed by putting the hood back where it belongs.\u003c\/p\u003e\n\u003cp\u003eA true rack restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA front hood that closes flush and evenly\u003c\/li\u003e\n\u003cli\u003eClips that latch at their designed tension and last\u003c\/li\u003e\n\u003cli\u003eA sealed forward bay that keeps spray and dust off electronics\u003c\/li\u003e\n\u003cli\u003eA quiet nose with no rattle or lift in flight\u003c\/li\u003e\n\u003cli\u003eQuick, easy access to the nose for inspections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe honest point: if your clips keep breaking, the clips are probably the evidence, not the cause. Check the rack before buying clips a third time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P100 OEM Front Hood Rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-001-08076\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Front hood support and locating rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Body shells and covers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P100 (2022, original P100)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P100 Pro\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Front of the fuselage, beneath and around the front hood\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Supporting and locating the front hood so it seals and latches correctly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure mode:\u003c\/strong\u003e Cracking or distortion that misaligns the hood\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e Uneven hood gaps and repeat clip failures point at the rack; a single failed clip on a flush hood points at the clip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownstream effects:\u003c\/strong\u003e Broken clips, gaps at seals, spray and dust in the forward bay, hood rattle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Nose impacts, levering the hood, vibration, overtightened fasteners, UV and chemical exposure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 × rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Front hood 05-002-01634, hood clips 02-001-07397 and 02-001-07399, fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated but distinct parts:\u003c\/strong\u003e Fuselage front compartment frame 02-001-08157, front rack 02-002-09969\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 02-001-08076 plus mounting points and locating features against the removed rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e Even hood gaps, both clips latching with even pressure, no rattle in hover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM structural component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P100 front hood rack\u003c\/p\u003e\n\u003cp\u003eXAG 02-001-08076\u003c\/p\u003e\n\u003cp\u003e02-001-08076 front hood rack\u003c\/p\u003e\n\u003cp\u003eXAG P100 OEM front hood rack\u003c\/p\u003e\n\u003cp\u003eP100 front hood rack replacement\u003c\/p\u003e\n\u003cp\u003eXAG P100 nose cover frame\u003c\/p\u003e\n\u003cp\u003eXAG P100 hood will not close\u003c\/p\u003e\n\u003cp\u003eXAG P100 front hood support\u003c\/p\u003e\n\u003cp\u003eP100 hood clips keep breaking\u003c\/p\u003e\n\u003cp\u003eXAG P100 nose structure\u003c\/p\u003e\n\u003cp\u003eXAG P100 airframe parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 body parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P100 front hood rack Canada\u003c\/p\u003e\n\u003cp\u003eXAG P100 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P100 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P100 front hood rack?\u003c\/strong\u003e It is the structural rack at the nose of the original P100, XAG part number 02-001-08076, that supports and locates the front hood so it closes flush, latches and seals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The original XAG P100 (2022). It is not confirmed for the P100 Pro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the front hood?\u003c\/strong\u003e No. The front hood (05-002-01634) is the nose cover. The rack is the structure it sits on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy hood clips keep breaking. Do I need new clips or a new rack?\u003c\/strong\u003e If the same clip breaks repeatedly, or the hood sits unevenly, the rack is the likely cause. New clips on a distorted rack break the same way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tell if the rack is distorted?\u003c\/strong\u003e Close the hood and check the gaps. Even gaps all round mean the rack is true. Gaps that are wide on one side and tight on the other mean the hood is being held off-centre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a small knock damage the rack?\u003c\/strong\u003e Yes. Even a gentle nose contact can move or crack it enough to change how the hood fits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does hood fit matter?\u003c\/strong\u003e Because the hood seals the forward electronics bay. Gaps let spray, dust and water reach the electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the hood or clips?\u003c\/strong\u003e No. The hood and the front and rear clips are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, with basic tools. Remove the hood, photograph the nose, note cable routing, and tighten the new rack's fasteners evenly without overtightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the new rack?\u003c\/strong\u003e Fit the hood, check the gaps are even, confirm both clips latch with normal pressure, and hover briefly to check for rattle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a cracked rack still be used?\u003c\/strong\u003e It may still hold, but it no longer holds the hood in the right place. That is enough to cause leaks and clip failures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the front rack?\u003c\/strong\u003e No. The front rack (02-002-09969) and the fuselage front compartment frame (02-001-08157) are different parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P100 Pro rack fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number on the rack you removed; this one is identified for the original P100.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 02-001-08076 on the rack you removed, or send us a photograph and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68140270223680,"sku":"02-001-08076","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p100-oem-front-hood-rack-1.png?v=1794885531","url":"https:\/\/aresacres.com\/es\/products\/xag-p100-oem-front-hood-rack","provider":"Ares Acres","version":"1.0","type":"link"}