{"product_id":"xag-p150-oem-hall-sensor-wire","title":"XAG P150 OEM Hall Sensor Wire","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P150 OEM Hall Sensor Wire\u003c\/strong\u003e, XAG part number 01-027-02869, is the sensor wire of the application system mechanism on the XAG P150 (2024) agricultural drone. A Hall sensor detects a magnetic field, and in a mechanism it is the part that tells the aircraft where a moving part is or whether it is moving. The sensor can only report what reaches the controller through its wire. That makes the wire a frequent, and frequently overlooked, cause of sensor faults. A wire that is chafed, pinched or cracked at a connector gives itself away in one specific way: the fault changes when the wire moves. Operators reach it through searches such as P150 Hall sensor wire, XAG P150 sensor cable, P150 Hall sensor error, or XAG P150 application system sensor fault.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P150 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eFitted as the Hall sensor wire of the application system mechanism on the XAG P150 (2024); not confirmed for the P150 Max\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 01-027-02869 and by connector type and length against the wire you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM sensor wire, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P150 Hall sensor wire, XAG part number 01-027-02869\u003c\/li\u003e\n\u003cli\u003eOne wire as XAG supplies it under this part number\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether the Hall sensor itself comes attached to this wire is not published for this part. Compare the item against the part you are replacing, or ask us and we will confirm before dispatch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the magnetic steel (02-002-09459), the gearbox silicone O-ring (02-001-07784), the middle connecting rod assembly (14-007-00076), cable ties, or tools.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA Hall sensor is a small electronic device that responds to a magnetic field. Mounted next to a moving part that carries a magnet, it produces a signal each time the magnet passes. A controller reads those signals, and from them it knows the position of the part, whether it is moving, and how often it completes a cycle. It is a simple, contact-free way of watching a mechanism, and it has no wearing surfaces of its own.\u003c\/p\u003e\n\u003cp\u003eOn the XAG P150, the application system mechanism has a Hall sensor, and this part is its wire. The same mechanism also lists a magnetic steel element, XAG part number 02-002-09459, among its parts. The exact pairing between this sensor and that magnet, and the exact signal the controller reads, are not published for this part. What matters for service is the general principle: the sensor, the magnet and the wire form one chain, and a break anywhere in that chain looks like a sensor fault.\u003c\/p\u003e\n\u003cp\u003eOf the three links, the wire is the one most exposed. The sensor sits in a fixed position and the magnet is carried on the mechanism, but the wire has to run from the mechanism to the electronics, past moving parts, across vibrating structure and through the same wash-down and spray exposure as everything else on the aircraft. Wires fail where they bend, where they are clamped, where they rub against an edge, and where they enter a connector.\u003c\/p\u003e\n\u003cp\u003eA wire fault behaves differently from a sensor fault. A failed sensor usually fails steadily: no signal, all the time. A damaged wire often fails intermittently. The copper inside is cracked or the insulation is worn through, and contact is made or broken as the wire moves. Vibration in flight is enough to move it. So is the operator's hand on the ground.\u003c\/p\u003e\n\u003cp\u003eThat difference gives the most useful test in the whole sensing chain. With the propellers removed and the aircraft safely powered for diagnosis, watch the sensor status while gently flexing the wire along its length and at each connector. If the fault appears or clears as the wire moves, the wire is the problem. If the fault is steady no matter how the wire is handled, look at the sensor and the magnet.\u003c\/p\u003e\n\u003cp\u003eConnectors deserve their own look. A connector that is not fully seated, has a bent pin, or shows green or white corrosion can produce exactly the same symptoms as a broken wire. Wash-down water and spray residue reach connectors on an agricultural aircraft every day. Cleaning and reseating a connector is always worth doing first, because it takes a few minutes and sometimes settles the question.\u003c\/p\u003e\n\u003cp\u003eWhen the wire is replaced, the route matters as much as the wire. A new wire laid along the path that damaged the old one will be damaged in the same place. Follow the original route, refit every clip and tie, keep the wire clear of moving parts through the full travel of the mechanism, and leave a gentle service loop rather than a tight pull at the connectors.\u003c\/p\u003e\n\u003cp\u003eSensor wiring is also easily pinched under a cover or between case halves when the mechanism is reassembled after other work. A sensor fault that starts immediately after a gearbox or connecting rod service is very often a pinched wire rather than a coincidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e Between the Hall sensor on the application system mechanism and the electronics it reports to; exact route not published for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The Hall sensor at one end and its connector at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Vibration at bends and clamps. Chafing against edges. Pinching on reassembly. Moisture and residue at the connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not the magnetic steel, the gearbox or the mechanism's moving parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy a part-number match matters.\u003c\/strong\u003e Sensor wires differ in length, connector type and pin arrangement. A wire that looks similar but has a different connector or a different length will not seat correctly or will end up routed under tension. Matching XAG part number 01-027-02869 is the way to be sure the replacement fits the route and the connector it was designed for.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe Hall sensor wire carries the sensor's signal from the application system mechanism to the electronics that read it.\u003c\/p\u003e\n\u003cp\u003eA sound Hall sensor wire provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA clean, continuous sensor signal\u003c\/li\u003e\n\u003cli\u003eReliable position and movement reporting from the mechanism\u003c\/li\u003e\n\u003cli\u003eFewer intermittent sensor errors in flight\u003c\/li\u003e\n\u003cli\u003eSecure connections at each end\u003c\/li\u003e\n\u003cli\u003eConfidence that a reported fault is real\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts value is in making sure the aircraft sees what the mechanism is actually doing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a sensor fault that changes when the wire is flexed: the wire, not the sensor\u003c\/h2\u003e\n\u003cp\u003eThe sensor, the magnet and the wire form one chain. Moving the wire is how you tell which link has failed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote when the fault appears.\u003c\/strong\u003e A fault that comes and goes in flight, or appears only under vibration, points at the wire or a connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMake the aircraft safe.\u003c\/strong\u003e Remove the propellers before any powered diagnosis, and remove the flight battery before handling connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the connectors.\u003c\/strong\u003e Look for a connector not fully seated, bent pins, and green or white corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and reseat.\u003c\/strong\u003e Clean any corrosion, reseat each connector fully, and test again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrace the route.\u003c\/strong\u003e Follow the wire from the sensor to its connector, looking for chafing, flattening, cuts and tight bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlex test.\u003c\/strong\u003e With the aircraft safely powered for diagnosis, watch the sensor status while gently flexing the wire section by section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead the result.\u003c\/strong\u003e A fault that appears or clears as the wire moves means the wire. A steady fault that ignores the wire points at the sensor or the magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph and ask.\u003c\/strong\u003e Send us the XAG part number and what you found and we will confirm the match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the fault follows the movement of the wire, or the wire is visibly damaged, this Hall sensor wire is the part. Correct the route that damaged it when you fit the new one.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eHall sensor wire replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn application system sensor error that comes and goes\u003c\/li\u003e\n\u003cli\u003eA fault that appears in flight and clears on the ground\u003c\/li\u003e\n\u003cli\u003eA fault that changes when the wire is flexed\u003c\/li\u003e\n\u003cli\u003eChafed, flattened or cut insulation along the route\u003c\/li\u003e\n\u003cli\u003eA cracked or loose connector body\u003c\/li\u003e\n\u003cli\u003eCorrosion on the connector pins that returns after cleaning\u003c\/li\u003e\n\u003cli\u003eA sensor fault that began right after mechanism service\u003c\/li\u003e\n\u003cli\u003eA wire found pinched under a cover or between case halves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese come from vibration, chafing, pinching on reassembly and moisture at the connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not Hall sensor wire symptoms, and this part will not fix them.\u003c\/strong\u003e A steady fault that does not change when the wire is flexed points at the sensor or the magnetic steel. A mechanism that binds, knocks or runs rough needs its mechanical parts checked. Water or grit in the gearbox needs its O-ring. A new wire carries the signal; it does not repair a sensor or a magnet that has failed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P150 OEM Hall Sensor Wire\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 01-027-02869\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Application system mechanism, sensing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Sensor wire\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Carries the Hall sensor signal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector type:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor attached:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Connected at both ends and routed along the original path with its clips and ties\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and confirm the aircraft cannot be powered\u003c\/li\u003e\n\u003cli\u003eConfirm the wire is XAG part number 01-027-02869 and matches the old one\u003c\/li\u003e\n\u003cli\u003ePhotograph the old wire's route, clips and connectors before removing it\u003c\/li\u003e\n\u003cli\u003eNote what damaged the old wire so the cause can be removed\u003c\/li\u003e\n\u003cli\u003eWork in a clean, dry area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect each connector by its body, never by pulling the wire\u003c\/li\u003e\n\u003cli\u003eRoute the new wire along the original path\u003c\/li\u003e\n\u003cli\u003eRefit every clip and tie that held the old wire\u003c\/li\u003e\n\u003cli\u003eKeep the wire clear of moving parts through the mechanism's full travel\u003c\/li\u003e\n\u003cli\u003eSeat each connector fully and leave a gentle service loop at each end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm no part of the wire can be pinched when covers are refitted\u003c\/li\u003e\n\u003cli\u003eWith the propellers removed, power the aircraft and confirm the sensor reads normally\u003c\/li\u003e\n\u003cli\u003eRepeat the flex test and confirm the reading stays steady\u003c\/li\u003e\n\u003cli\u003eKeep wash-down water away from connectors\u003c\/li\u003e\n\u003cli\u003eInspect the route and connectors at every major service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe Hall sensor wire is how the aircraft knows what its application system mechanism is doing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P150 operators chasing an intermittent sensor error\u003c\/li\u003e\n\u003cli\u003eTechnicians repairing chafed or pinched wiring\u003c\/li\u003e\n\u003cli\u003eCrews who have just serviced the mechanism and now see a fault\u003c\/li\u003e\n\u003cli\u003eCustom application contractors flying long, high-vibration days\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres doing mechanism rebuilds\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eService centres check sensor wiring as part of every mechanism rebuild, because the wire is the link in the sensing chain most exposed to vibration and handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e the fault is steady and does not change when the wire is flexed, or the wire is intact and the connectors are clean. In that case check the sensor and the magnetic steel first. And if your aircraft is a P150 Max, confirm the part number on your wire; this one is identified for the P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFleet operators\u003c\/strong\u003e who see the same sensor wire fail on several aircraft should look at the route rather than the wire. Repeated failures at one point mean something on that route is cutting, pinching or flexing it, and correcting that point protects every aircraft in the fleet.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA sensor is only as reliable as the wire that carries its signal. When the wire fails, the aircraft loses sight of its own mechanism.\u003c\/p\u003e\n\u003cp\u003eWire faults are usually intermittent, which makes them frustrating to find. The flex test turns an intermittent fault into a repeatable one.\u003c\/p\u003e\n\u003cp\u003eCleaning and reseating connectors first takes minutes and sometimes settles the question.\u003c\/p\u003e\n\u003cp\u003eWhen the wire is replaced, correcting the route that damaged it is what stops the fault returning.\u003c\/p\u003e\n\u003cp\u003eA sensor fault right after mechanism service is very often a pinched wire. Checking for that first avoids replacing parts that were never faulty.\u003c\/p\u003e\n\u003cp\u003eFor crews flying long days with heavy vibration, inspecting sensor wiring at major services catches chafing before it becomes a fault.\u003c\/p\u003e\n\u003cp\u003eA sound Hall sensor wire restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA steady, trustworthy sensor signal\u003c\/li\u003e\n\u003cli\u003eCorrect reporting from the application system mechanism\u003c\/li\u003e\n\u003cli\u003eFreedom from intermittent errors\u003c\/li\u003e\n\u003cli\u003eClean, secure connections\u003c\/li\u003e\n\u003cli\u003eConfidence in what the aircraft reports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe sensing chain has three links: the sensor, the magnet and the wire. The wire is the one that travels, bends and rubs, and it is the one to check first when a fault comes and goes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P150 OEM Hall Sensor Wire\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 01-027-02869\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Hall sensor wire\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Application system sensing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Carrying the Hall sensor signal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure modes:\u003c\/strong\u003e Chafing, cracked conductors, pinching, connector corrosion\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e A fault that changes when the wire is flexed is the wire, not the sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Vibration, chafing, pinching on reassembly, moisture\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear driver:\u003c\/strong\u003e Vibration and handling during service\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated parts:\u003c\/strong\u003e Magnetic steel 02-002-09459, middle connecting rod assembly 14-007-00076, gearbox silicone O-ring 02-001-07784\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector type:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Magnetic steel, cable ties, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 01-027-02869 plus connector type and length against the removed wire\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e Sensor reads steadily through the flex test\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService habit:\u003c\/strong\u003e Check sensor wiring for pinching after every mechanism service\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P150 Hall sensor wire\u003c\/p\u003e\n\u003cp\u003eXAG 01-027-02869\u003c\/p\u003e\n\u003cp\u003e01-027-02869 sensor wire\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM Hall sensor wire\u003c\/p\u003e\n\u003cp\u003eP150 Hall sensor wire replacement\u003c\/p\u003e\n\u003cp\u003eXAG P150 sensor cable\u003c\/p\u003e\n\u003cp\u003eXAG P150 Hall sensor error\u003c\/p\u003e\n\u003cp\u003eXAG P150 application system sensor fault\u003c\/p\u003e\n\u003cp\u003eP150 intermittent sensor error\u003c\/p\u003e\n\u003cp\u003eXAG P150 application system parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 wiring parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 sensor parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P150 Hall sensor wire Canada\u003c\/p\u003e\n\u003cp\u003eXAG P150 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P150 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P150 Hall sensor wire?\u003c\/strong\u003e It is the wire, XAG part number 01-027-02869, that carries the signal from the Hall sensor in the application system mechanism of the XAG P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The XAG P150 (2024). It is not confirmed for the P150 Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe sensor error comes and goes. Is it the sensor?\u003c\/strong\u003e Often it is the wire. Gently flex the wire while watching the sensor status; if the fault changes, the wire is the cause.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a Hall sensor do?\u003c\/strong\u003e It detects a magnetic field, letting the aircraft know the position or movement of a part in the mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the Hall sensor attached?\u003c\/strong\u003e That is not published for this part. Compare against the part you are replacing, or ask us to confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the magnetic steel?\u003c\/strong\u003e No. The magnetic steel is XAG part number 02-002-09459.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is it?\u003c\/strong\u003e The length is not published for this part. Match against the wire you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fault started right after I serviced the mechanism. Why?\u003c\/strong\u003e A wire pinched under a cover or between case halves is the most common cause. Check the route before replacing parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I clean the connectors first?\u003c\/strong\u003e Yes. Clean any corrosion and reseat each connector fully, then test again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Follow the original route, refit every clip and tie, and seat each connector fully.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the repair?\u003c\/strong\u003e With the propellers removed, power the aircraft and confirm the sensor reads steadily, including while the wire is gently flexed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new wire fix a steady sensor fault?\u003c\/strong\u003e Not if the old wire was sound. A steady fault that ignores the wire points at the sensor or the magnet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I splice the old wire instead?\u003c\/strong\u003e Not recommended. A splice in a vibrating sensor wire is a common source of new intermittent faults.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P150 Max wire fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number; this one is identified for the P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the same wire keep failing?\u003c\/strong\u003e Something on the route is cutting, pinching or flexing it. Correct the route when fitting the new wire.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can I protect the wire?\u003c\/strong\u003e Keep it on its original route with every clip fitted, and keep wash-down water away from the connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I keep spares?\u003c\/strong\u003e Yes, with other application system service parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 01-027-02869 on the packaging, or send us what you found and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68140559794496,"sku":"01-027-02869","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p150-oem-hall-sensor-wire-1.png?v=1794886391","url":"https:\/\/aresacres.com\/es\/products\/xag-p150-oem-hall-sensor-wire","provider":"Ares Acres","version":"1.0","type":"link"}