{"product_id":"xag-p150-oem-m5x12x10-screw-kit","title":"XAG P150 OEM M5×12×10 Screw Kit","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P150 OEM M5×12×10 Screw Kit\u003c\/strong\u003e, XAG part number 02-004-00256, is a kit of M5 screws for the XAG P150 (2024) agricultural drone. M5 is the metric designation for a 5 mm thread. Screws in a kit like this look alike, and that is exactly the risk. A screw that is too long for its hole reaches the bottom of a blind thread before its head clamps the part. It stops turning, it feels tight, and the part underneath is still loose. On a vibrating spray aircraft, a joint that is not truly clamped works itself looser every flight. Operators reach it through searches such as P150 M5 screw kit, XAG P150 screws, P150 fastener kit, or XAG P150 replacement screws.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P150 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the XAG P150 (2024); not confirmed for the P150 Max\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 02-004-00256 and by thread, length and head against the screws you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM screw kit, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P150 M5×12×10 screw kit, XAG part number 02-004-00256\u003c\/li\u003e\n\u003cli\u003eScrews as XAG supplies them under this part number\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe number of screws in the kit is not published for this part. Check the listing quantity, or ask us and we will confirm before dispatch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the parts the screws fasten, threaded inserts, washers or nuts unless supplied by XAG under this part number, threadlocker, or tools.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA screw clamps one part to another by stretching very slightly as it is tightened. That stretch is what holds the joint together, and it only happens when the head of the screw bears down on the part it is holding. A screw that stops turning for any other reason feels just as tight in the hand, but it is not clamping anything.\u003c\/p\u003e\n\u003cp\u003eThe XAG part name gives this kit as M5×12×10. M5 is the standard metric designation for a 5 mm thread. What the 12 and 10 figures describe is not published for this part, and the exact positions on the P150 where these screws are fitted are not published either. The safe rule follows from that: match the kit by XAG part number, and match each screw against the one you removed for thread, length and head before you drive it.\u003c\/p\u003e\n\u003cp\u003eLength matters more than most people expect. Many screws on a drone go into blind holes, threaded holes with a bottom, often in an insert set into plastic or composite. A screw that is longer than the hole is deep reaches the bottom before its head reaches the part. It stops dead, and to the hand that feels like a properly tightened screw. The part underneath can still be lifted or rocked, and the gap under the head is often too small to notice without looking for it.\u003c\/p\u003e\n\u003cp\u003eA screw that is too short has the opposite problem. It engages only a few threads, and a few threads carry the whole clamping load. Under vibration those threads strip, often taking the thread in the hole with them, and a simple screw replacement becomes an insert or housing repair.\u003c\/p\u003e\n\u003cp\u003eBoth mistakes usually happen the same way: screws from different positions are removed together during a service, put in one tray, and refitted wherever they seem to go. On an aircraft that is serviced often and in the field, that is common. A kit of correct, new screws, laid out against the positions they came from, removes the guesswork.\u003c\/p\u003e\n\u003cp\u003eVibration is what turns a loose joint into a failure. A spray drone shakes from its motors and propellers through every flight. A joint that is not truly clamped moves a little with each vibration cycle. The movement wears the hole, loosens the screw further and, if the part carries load or holds a moving component, can let it shift out of line.\u003c\/p\u003e\n\u003cp\u003eOld screws also wear. Threads stretch, heads round off from repeated driving, and corrosion from spray residue and wash-down roughens threads so that the screw binds before it clamps. Replacing worn screws with new OEM screws, rather than reusing them, restores a known, clean clamping joint.\u003c\/p\u003e\n\u003cp\u003eWhere XAG service guidance calls for threadlocker on a particular screw, follow it. Whether threadlocker is specified for these positions is not published for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e Positions on the XAG P150 that take these M5 screws; exact positions not published for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The parts it fastens and the threaded holes or inserts it screws into.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Repeated removal and refitting. Vibration. Corrosion from spray residue. Overtightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not a threaded insert, a nut or the part being fastened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy a part-number match matters.\u003c\/strong\u003e Generic M5 screws come in many lengths, head shapes, materials and finishes. A screw with the right thread and the wrong length is exactly the mistake that leaves a joint loose under a tight head. Matching XAG part number 02-004-00256 gives the screw XAG specified for these positions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe M5×12×10 screw kit supplies new M5 screws to clamp parts on the XAG P150.\u003c\/p\u003e\n\u003cp\u003eA correct, new set of screws provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJoints that are truly clamped, not just tight\u003c\/li\u003e\n\u003cli\u003eFull thread engagement in each hole\u003c\/li\u003e\n\u003cli\u003eResistance to loosening under vibration\u003c\/li\u003e\n\u003cli\u003eClean threads free of corrosion and wear\u003c\/li\u003e\n\u003cli\u003eFresh heads that take the driver without rounding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts value is in making every fastened joint hold the way it was designed to.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the screw is tight but the part still moves: check that the screw has not bottomed out\u003c\/h2\u003e\n\u003cp\u003eA screw can stop turning for two reasons: it has clamped the part, or it has hit the bottom of its hole. Only one of those holds the part.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMake the aircraft safe.\u003c\/strong\u003e Remove the flight battery and confirm the aircraft cannot be powered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest the joint.\u003c\/strong\u003e With the screw tight, try to lift, rock or slide the part it holds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLook under the head.\u003c\/strong\u003e A visible gap between the screw head and the part means the screw has bottomed out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the screw.\u003c\/strong\u003e Compare its length against a screw from the matching position on the other side, or against the XAG part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the hole.\u003c\/strong\u003e Look for debris in the bottom of the hole, which also stops a screw early.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the threads.\u003c\/strong\u003e Stretched, corroded or damaged threads on the screw mean it should not go back in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the correct screw.\u003c\/strong\u003e A screw of the right length draws the part down and then stops firmly with no gap under the head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph and ask.\u003c\/strong\u003e Send us the XAG part number and what you found and we will confirm the match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the screw is the wrong length, worn or corroded, this screw kit is the part. If the thread in the hole is stripped, the hole or its insert needs repair first.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eM5 screw kit replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA part that moves although its screw feels tight\u003c\/li\u003e\n\u003cli\u003eA gap visible under a tightened screw head\u003c\/li\u003e\n\u003cli\u003eScrews mixed up after a service\u003c\/li\u003e\n\u003cli\u003eMissing screws found at preflight\u003c\/li\u003e\n\u003cli\u003eRounded or damaged screw heads\u003c\/li\u003e\n\u003cli\u003eCorroded or stretched threads\u003c\/li\u003e\n\u003cli\u003eScrews that keep backing out under vibration\u003c\/li\u003e\n\u003cli\u003eAny service where the original screws have been removed several times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese come from mixed-up screws, wear, corrosion and vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not screw symptoms, and this part will not fix them.\u003c\/strong\u003e A screw that spins without tightening usually means a stripped hole or a failed insert, which a new screw will not repair. A cracked part needs the part. A joint that loosens again with correct screws may need the XAG-specified threadlocker or a check of the mating surfaces. A new screw clamps a sound hole; it does not rebuild a damaged one.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P150 OEM M5×12×10 Screw Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-004-00256\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Screw kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e M5, per the XAG part name\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMeaning of the 12 and 10 figures:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead type:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial and finish:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity per kit:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTightening torque:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and confirm the aircraft cannot be powered\u003c\/li\u003e\n\u003cli\u003eConfirm the kit is XAG part number 02-004-00256\u003c\/li\u003e\n\u003cli\u003eCompare each new screw with the one it replaces for thread, length and head\u003c\/li\u003e\n\u003cli\u003eLay out removed screws in order of their positions\u003c\/li\u003e\n\u003cli\u003eClear debris from each threaded hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart each screw by hand to avoid cross-threading\u003c\/li\u003e\n\u003cli\u003eUse a driver that fits the head fully\u003c\/li\u003e\n\u003cli\u003eTighten firmly and evenly without overtightening\u003c\/li\u003e\n\u003cli\u003eApply XAG-specified threadlocker where service guidance calls for it\u003c\/li\u003e\n\u003cli\u003eConfirm there is no gap under the head once tight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTry to move the fastened part and confirm it is firmly clamped\u003c\/li\u003e\n\u003cli\u003eCheck the screws again after the first flights\u003c\/li\u003e\n\u003cli\u003eInclude screw checks in every preflight\u003c\/li\u003e\n\u003cli\u003eKeep spare screws so worn ones are never reused\u003c\/li\u003e\n\u003cli\u003eKeep screws from different positions separate during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe M5 screw kit keeps fastened joints on the P150 clamped the way they were designed to be.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P150 operators who found loose or missing screws\u003c\/li\u003e\n\u003cli\u003eTechnicians reassembling after a service\u003c\/li\u003e\n\u003cli\u003eCrews whose screws were mixed up during a field repair\u003c\/li\u003e\n\u003cli\u003eCustom application contractors flying long, high-vibration days\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres stocking fasteners\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eService centres fit new screws during rebuilds rather than reusing old ones, because a worn or wrong-length screw is one of the easiest faults to build back into an aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e the screw spins without tightening because the hole or insert is stripped, or the part it holds is cracked. Repair those first. And if your aircraft is a P150 Max, confirm the part number on your screws; this kit is identified for the P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFleet operators\u003c\/strong\u003e who service several aircraft in the field should keep screw kits in the service case and keep each aircraft's screws separate during work. Most wrong-length screws come from a shared tray, and a sorted kit makes the right screw the easy choice.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA screw that feels tight is not always holding anything. The difference is whether its head is clamping the part or its tip has hit the bottom of the hole.\u003c\/p\u003e\n\u003cp\u003eOn a vibrating spray aircraft, a joint that is not truly clamped loosens a little every flight and wears the hole as it goes.\u003c\/p\u003e\n\u003cp\u003eLooking for a gap under the head and testing the part for movement takes seconds and tells you which kind of tight you have.\u003c\/p\u003e\n\u003cp\u003eFitting new, correct screws restores a clean thread and a known clamping joint, rather than relying on worn or corroded threads.\u003c\/p\u003e\n\u003cp\u003eKeeping screws from different positions apart during service prevents most wrong-length mistakes before they happen.\u003c\/p\u003e\n\u003cp\u003eFor crews servicing aircraft in the field, a spare kit means a missing or damaged screw never has to be replaced with whatever is in the toolbox.\u003c\/p\u003e\n\u003cp\u003eA correct, new set of M5 screws restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTruly clamped joints\u003c\/li\u003e\n\u003cli\u003eFull thread engagement\u003c\/li\u003e\n\u003cli\u003eResistance to vibration loosening\u003c\/li\u003e\n\u003cli\u003eClean, sound threads\u003c\/li\u003e\n\u003cli\u003eConfidence after every reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eScrews are the smallest parts on the aircraft and the ones that hold everything else in place. Getting the right one in the right hole is the simplest way to keep every other part where it belongs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P150 OEM M5×12×10 Screw Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-004-00256\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e M5 screw kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e M5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Clamping fastened parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure modes:\u003c\/strong\u003e Wrong length, stretched or corroded threads, rounded heads, loosening\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e A tight screw with a gap under its head has bottomed out and is not clamping\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Mixed-up screws after service, wear, corrosion, vibration\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear driver:\u003c\/strong\u003e Repeated removal and vibration\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity per kit:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTightening torque:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Fastened parts, inserts, threadlocker, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 02-004-00256 plus thread, length and head against the removed screw\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e No gap under the head; fastened part does not move\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService habit:\u003c\/strong\u003e Keep screws from different positions separate during service\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P150 M5×12×10 screw kit\u003c\/p\u003e\n\u003cp\u003eXAG 02-004-00256\u003c\/p\u003e\n\u003cp\u003e02-004-00256 screw kit\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM M5 screws\u003c\/p\u003e\n\u003cp\u003eP150 screw kit replacement\u003c\/p\u003e\n\u003cp\u003eXAG P150 screws\u003c\/p\u003e\n\u003cp\u003eXAG P150 fastener kit\u003c\/p\u003e\n\u003cp\u003eXAG P150 M5 screw\u003c\/p\u003e\n\u003cp\u003eP150 loose screw\u003c\/p\u003e\n\u003cp\u003eXAG P150 hardware kit\u003c\/p\u003e\n\u003cp\u003eXAG P150 fasteners\u003c\/p\u003e\n\u003cp\u003eXAG P150 service parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P150 screw kit Canada\u003c\/p\u003e\n\u003cp\u003eXAG P150 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P150 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P150 M5×12×10 screw kit?\u003c\/strong\u003e It is a kit of M5 screws, XAG part number 02-004-00256, for the XAG P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The XAG P150 (2024). It is not confirmed for the P150 Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy screw is tight but the part still moves. Why?\u003c\/strong\u003e The screw has probably bottomed out in its hole. Look for a gap under the head and check its length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does M5 mean?\u003c\/strong\u003e It is the standard metric designation for a 5 mm thread.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the 12 and 10 figures mean?\u003c\/strong\u003e That is not published for this part. Match each screw against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many screws come in the kit?\u003c\/strong\u003e The quantity is not published for this part. Check the listing quantity or ask us to confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere are these screws fitted?\u003c\/strong\u003e The exact positions are not published for this part. Match by XAG part number and against the screws you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reuse the old screws?\u003c\/strong\u003e Not recommended if they are worn, stretched or corroded. Fit new ones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use generic M5 screws?\u003c\/strong\u003e Not recommended. Length, head and material may not match, and wrong length is the commonest cause of a loose joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat torque should I use?\u003c\/strong\u003e The tightening torque is not published for this part. Tighten firmly and evenly without overtightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I use threadlocker?\u003c\/strong\u003e Follow XAG service guidance where it calls for threadlocker. It is not published for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe screw spins and will not tighten. Will a new screw fix it?\u003c\/strong\u003e No. That usually means a stripped hole or failed insert, which needs repair first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the repair?\u003c\/strong\u003e There is no gap under the head and the fastened part does not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P150 Max screw kit fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number; this kit is identified for the P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I avoid mixing screws up?\u003c\/strong\u003e Lay removed screws out in order of their positions and keep each aircraft's screws separate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit them myself?\u003c\/strong\u003e Yes. Start each screw by hand, use a driver that fits the head fully and tighten evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I keep spares?\u003c\/strong\u003e Yes, in the field service case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 02-004-00256 on the packaging, or send us what you found and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68140559827264,"sku":"02-004-00256","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p150-oem-m5x12x10-screw-kit-1.png?v=1794886393","url":"https:\/\/aresacres.com\/es\/products\/xag-p150-oem-m5x12x10-screw-kit","provider":"Ares Acres","version":"1.0","type":"link"}