{"product_id":"dji-agras-t20-oem-charger-head-cover","title":"DJI Agras T20 OEM Charger Head Cover","description":"\u003cp\u003eThe DJI Agras T20 OEM Charger Head Cover is the black, moulded, angled housing that encloses the output head of the charger, the end that connects to the flight battery during charging. It is a compact shell with one steeply chamfered face, a flat raised panel set off by a recessed step, rounded edges and a stepped lower edge where it closes onto the rest of the head. It belongs to the ground power and charging equipment, not to the aircraft, and it is an outer housing only: it holds no contacts and carries no current itself. It is identified for the DJI Agras T20 and T16. Operators usually find it while searching for a T20 charger head cover, a T16 charging head housing, a cracked charger plug cover, or a replacement shell for the end of the charging lead. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T20 \/ DJI Agras T16 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T20 and T16 charging equipment, output-head position\u003c\/li\u003e\n\u003cli\u003eMatched by outline, chamfered face, raised panel and stepped lower edge against the cover you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM charging-equipment housing, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you want the match confirmed, photograph the cover you removed from the chamfered side and from underneath, so the raised panel and the stepped lower edge are both visible, and send it to us — we will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Charger Head Cover — the one-piece black moulded housing for the charger's output head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the cover alone.\u003c\/strong\u003e It is an outer housing, not a charging head, not a connector and not a charger.\u003c\/p\u003e\n\u003cp\u003eNot included: the charger, the output cable, the connector body, contacts or terminals, any internal wiring, seals or strain relief, and the screws or clips that hold the cover. Reuse the original fixings only if their threads and heads are sound.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the cover on the charger. If a fixing or insert is missing from the head you are rebuilding, tell us which one and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe charger head cover is the outer shell at the business end of the charging equipment. It is the part the operator's hand closes around every time the charger is connected to or pulled from a battery, and it is the part that hits the ground, the tailgate or the trailer deck when the lead is dropped.\u003c\/p\u003e\n\u003cp\u003eIts shape tells you how it is handled. Looking at the part on its own, it has four working areas:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe chamfered face\u003c\/strong\u003e — a steep angled face across one end of the housing, which shapes the head and sets how it sits in the hand and against the battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe raised panel\u003c\/strong\u003e — a flat panel standing proud of the main face behind a recessed step, giving the housing a defined grip and orientation face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe rounded body\u003c\/strong\u003e — a compact box-like shell with rounded corners and edges that closes around the inner parts of the head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe stepped lower edge\u003c\/strong\u003e — the edge where the cover closes onto the rest of the head, which locates the cover and lets it seat flush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the cover encloses the inner parts of the head, it does two jobs at once: it gives the operator something solid to hold, and it keeps dust, residue, moisture and fingers away from what sits inside. When it is whole and seated, neither job is noticed. When it cracks, chips or comes loose, both start to fail.\u003c\/p\u003e\n\u003cp\u003eOver a working season the cover sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHundreds of connect and disconnect cycles, each one a pull or a push through the housing\u003c\/li\u003e\n\u003cli\u003eDrops onto concrete, gravel, tailgates and trailer decks\u003c\/li\u003e\n\u003cli\u003eDust and chaff in the field and in the truck\u003c\/li\u003e\n\u003cli\u003eChemical residue carried on gloves and hands from the spray side of the operation\u003c\/li\u003e\n\u003cli\u003eSun and heat on a trailer or in a vehicle between flights\u003c\/li\u003e\n\u003cli\u003eBeing stepped on, driven over or crushed under equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCovers in this position come out for three reasons: a crack from a drop, a chipped or broken edge that no longer closes flush, or a cover that has worked loose and no longer stays seated. Each of those is a housing problem. The more important question, and the one this part's diagnosis is built around, is whether the damage stopped at the housing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe cover's engineering role is enclosure and handling. It holds the outer form of the charger's output head, gives the operator a solid grip for connecting and disconnecting, and keeps the parts inside the head covered.\u003c\/p\u003e\n\u003cp\u003eAt the output head it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEncloses the inner parts of the charging head\u003c\/li\u003e\n\u003cli\u003eProvides the grip surface used for every connect and disconnect\u003c\/li\u003e\n\u003cli\u003eGives the head its outer shape and orientation in the hand\u003c\/li\u003e\n\u003cli\u003eKeeps dust, chaff, residue and fingers away from what sits inside\u003c\/li\u003e\n\u003cli\u003eTakes knocks and drops on the moulding rather than on the inner parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt carries no current and holds no electrical function of its own\u003c\/li\u003e\n\u003cli\u003eIt is not the connector; the contacts and terminals are separate parts inside the head\u003c\/li\u003e\n\u003cli\u003eIt does not regulate, limit or monitor charging; that is the charger's job\u003c\/li\u003e\n\u003cli\u003eIt is not a waterproof seal; a closed cover reduces exposure, it does not make the head watertight\u003c\/li\u003e\n\u003cli\u003eIt will not cure a head that does not charge, charges intermittently or runs hot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat last point is the reason this part needs an honest page. A cracked cover and a charging fault often arrive together, after the same drop, and it is easy to assume one part explains both. It usually does not.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a charging fault lives in the contacts; a cracked cover only exposes them\u003c\/h2\u003e\n\u003cp\u003eA dropped charging head typically comes back with two problems at once: a cracked cover you can see, and a charging fault you can only infer. The cover is the one in your hand, so it gets the blame. A new cover fixes the crack. It does not fix the charging.\u003c\/p\u003e\n\u003cp\u003eThe cover is an outer housing. The contacts, terminals and wiring that carry current sit inside it and are separate parts. If the head stopped charging after a drop, the drop has reached those parts, and they need to be checked on their own merits, not assumed sound because the outside will look new again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSort the symptoms into two groups:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing symptoms — a new cover is the repair:\u003c\/strong\u003e a crack or chip in the moulding, a broken edge, a cover that will not close flush or stay seated, a rough or split grip surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical symptoms — the cover is not the repair:\u003c\/strong\u003e no charging, intermittent charging, a connection that drops when the lead is moved, error messages on the charger, a head or battery terminal that runs hot, discoloured or melted material at the contacts, a burning smell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse the cover as a clue, not a verdict.\u003c\/strong\u003e Heat marks, browning or softening on the inside of the cover near the contacts point at a hot connection inside the head. That is an electrical problem to resolve before the head is used again, and covering it with a new housing would hide the evidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore fitting a new cover, with the charger switched off and disconnected from its power source:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook at the contacts for bending, pitting, burning or discolouration\u003c\/li\u003e\n\u003cli\u003eLook at the inner parts the cover encloses for cracks or displacement\u003c\/li\u003e\n\u003cli\u003eLook for residue, moisture or debris that entered through the crack\u003c\/li\u003e\n\u003cli\u003eCheck the battery-side terminals the head mates with; a damaged battery terminal can damage a good head\u003c\/li\u003e\n\u003cli\u003eConfirm the lead behind the head is not cut, crushed or pulled from its strain relief\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClear those checks first, while the head is already open and that information is still cheap. If they are clean, the cover is the whole repair. If any of them is not, the cover is the last thing to replace, not the first.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the charger head cover when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack anywhere in the moulding\u003c\/li\u003e\n\u003cli\u003eA chipped or broken edge, so the cover no longer closes flush\u003c\/li\u003e\n\u003cli\u003eA cover that will not stay seated on the head\u003c\/li\u003e\n\u003cli\u003eA crushed or split grip surface after a drop or a vehicle strike\u003c\/li\u003e\n\u003cli\u003eStress whitening in the moulding\u003c\/li\u003e\n\u003cli\u003ePrevious repairs with tape, adhesive or filler\u003c\/li\u003e\n\u003cli\u003eA cover missing or lost from the head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStop and check the electrical side first if you see any of these, because a cover will not resolve them:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe head does not charge, or charges only when the lead is held a certain way\u003c\/li\u003e\n\u003cli\u003eError messages on the charger when the head is connected\u003c\/li\u003e\n\u003cli\u003eHeat, browning or melting at the contacts or on the inside of the cover\u003c\/li\u003e\n\u003cli\u003eA burning smell from the head or the battery terminal\u003c\/li\u003e\n\u003cli\u003eDamage to the battery terminals the head connects to\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for this cover. It is replaced when it is cracked, broken, loose or missing, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T20 OEM Charger Head Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T20\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T20 and T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Power — charging equipment, output head\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e One-piece moulded housing cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Compact angled housing with a steep chamfered face, a raised flat panel behind a recessed step, rounded edges and a stepped lower edge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the cover carries no current; contacts and wiring are separate parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None on the cover itself\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Outer housing of the charger's output head\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Closes over the inner parts of the head and is retained by the original fixings; fixings are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM charging-equipment housing\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch the charger off and disconnect it from its power source; do not open a head that is connected to power\u003c\/li\u003e\n\u003cli\u003eDisconnect the head from any battery and let it cool if it has been in use\u003c\/li\u003e\n\u003cli\u003eClean and dry the head so residue does not fall inside when the cover comes off\u003c\/li\u003e\n\u003cli\u003ePhotograph the head from each side with the old cover in place\u003c\/li\u003e\n\u003cli\u003eLay the new cover beside the old one and compare the chamfered face, the raised panel and the stepped lower edge\u003c\/li\u003e\n\u003cli\u003eKeep the original fixings together in a tray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease the original fixings and lift the old cover off without pulling on the lead or the inner parts\u003c\/li\u003e\n\u003cli\u003eCarry out the electrical checks while the inside of the head is in view: contacts, inner parts, residue, the lead and its strain relief\u003c\/li\u003e\n\u003cli\u003eDo not continue if you find burning, melting or damaged contacts; that is an electrical repair first\u003c\/li\u003e\n\u003cli\u003eSeat the new cover so the stepped lower edge closes flush all the way round before fitting any fixing\u003c\/li\u003e\n\u003cli\u003eStart every fixing by hand; DJI does not publish a torque figure for these fixings, so snug them without crushing the moulding\u003c\/li\u003e\n\u003cli\u003eCheck that no wire, seal or inner part is pinched under the edge of the cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the cover sits flush and does not move when the head is gripped\u003c\/li\u003e\n\u003cli\u003eConnect to a battery with the charger off and check the head seats fully and squarely\u003c\/li\u003e\n\u003cli\u003ePower the charger and run a normal charge while watching for errors\u003c\/li\u003e\n\u003cli\u003eFeel the head after a few minutes of charging; it should not be running hotter than before the damage\u003c\/li\u003e\n\u003cli\u003eRecord the replacement, and any electrical findings, in the equipment log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Hang or stow the charging lead so the head is not left on the ground or the trailer deck where it can be stepped on or driven over. Wipe residue off the head with a dry cloth, and keep spray-side gloves off the charger. Disconnect by gripping the head, not by pulling the lead; that keeps the load off the cover's lower edge and off the strain relief behind it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis cover is for operators and technicians putting the charging equipment for a T20 or T16 back into good order:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T20 operators whose charger head cover has cracked or come loose\u003c\/li\u003e\n\u003cli\u003eDJI Agras T16 operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators running several charge cycles a day from a truck or trailer\u003c\/li\u003e\n\u003cli\u003eAgras service centres refurbishing ground equipment between seasons\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping chargers safe and tidy across several aircraft\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own aircraft who want a head that closes properly again\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe head does not charge or charges only intermittently — the fault is in the contacts, wiring or charger, and a new cover will not change it\u003c\/li\u003e\n\u003cli\u003eThere is heat damage, melting or burning at the contacts — resolve the electrical fault first and do not use the head until then\u003c\/li\u003e\n\u003cli\u003eThe output cable is cut, crushed or pulled from its strain relief — that is a cable repair\u003c\/li\u003e\n\u003cli\u003eThe battery's own terminals are damaged — repair or replace the battery side\u003c\/li\u003e\n\u003cli\u003eThe cover is scuffed but whole and still seats flush — it is still doing its job\u003c\/li\u003e\n\u003cli\u003eYou use charging equipment for a T20P, T10, T30, T40 or T50 — this cover is identified only for the T20 and T16\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe charger head cover is handled more than almost any other part of an Agras operation. Every flight cycle ends with a hand closing around it to connect a battery and begins with the same hand pulling it free. It is the grip, the shell and the first line of protection for everything inside the head.\u003c\/p\u003e\n\u003cp\u003eA cracked cover matters for that reason. Once it is open, dust, chaff, residue and moisture reach the inner parts of the head every time the lead is set down, and the cracked edge takes the full load of every connect and disconnect. A head with a broken cover keeps working until the day those inner parts are the next thing to fail.\u003c\/p\u003e\n\u003cp\u003eThe honest limit matters just as much. A cover is a housing. It does not charge, it does not connect and it does not cure a charging fault that arrived with the same drop. If the head has stopped charging or shows heat at its contacts, the cover is not the repair, and replacing it first would only make a damaged head look sound.\u003c\/p\u003e\n\u003cp\u003eThe check is quick. With the charger switched off and disconnected, look at the contacts and the inner parts while the old cover is off. If they are clean, this is the part that closes the head up again and puts a solid grip back in the operator's hand.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T20 OEM Charger Head Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T20\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T20; DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T20 and T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Charger head cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Power — charging equipment\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Outer housing of the charger's output head, the end that connects to the flight battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Encloses the inner parts of the charging head and provides the grip for connecting and disconnecting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e One-piece black moulded angled housing: chamfered face, raised panel, rounded edges, stepped lower edge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Charger, output cable, connector contacts or terminals, internal wiring, fixings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical function:\u003c\/strong\u003e None — the cover carries no current\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Housing damage is fixed by a new cover; no charging, intermittent charging or heat at the contacts is an electrical fault the cover does not resolve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked moulding from a drop, chipped or broken edge, cover worked loose, cover lost\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM charging-equipment housing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T20 charger head cover; T16 charger head housing; T20 charging head shell; Agras T20 charger plug cover; T16 T20 charger head case; DJI T20 charger output head cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a charger, not a charging cable, not a connector or contact set, not a battery, not a battery terminal cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T20 charger head cover\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 charger head cover\u003c\/p\u003e\n\u003cp\u003eDJI T16 T20 charger head housing\u003c\/p\u003e\n\u003cp\u003eAgras T20 charging head shell\u003c\/p\u003e\n\u003cp\u003eT20 charger plug cover\u003c\/p\u003e\n\u003cp\u003eT16 charging head cover\u003c\/p\u003e\n\u003cp\u003eDJI T20 charger output head cover\u003c\/p\u003e\n\u003cp\u003eT20 cracked charger head cover\u003c\/p\u003e\n\u003cp\u003eAgras T20 charger housing replacement\u003c\/p\u003e\n\u003cp\u003eDJI T20 charging equipment parts\u003c\/p\u003e\n\u003cp\u003eAgras T20 Charger Head Cover\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 OEM Charger Head Cover\u003c\/p\u003e\n\u003cp\u003eAgras T20 charger head cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T16 Charger Head Cover\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 OEM Charger Head Cover\u003c\/p\u003e\n\u003cp\u003eAgras T16 charger head cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 charging parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 charging parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras batteries and charging\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 Charger Head Cover Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T20 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T20 charger head cover?\u003c\/strong\u003e A one-piece black moulded angled housing that encloses the charger's output head, the end that connects to the flight battery. It is the grip and outer shell of the head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich equipment does it fit?\u003c\/strong\u003e It is identified for the charging equipment of the DJI Agras T20 and T16. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit T20P charging equipment?\u003c\/strong\u003e The T20P is a different aircraft from the T20. This cover is identified only for the T20 and T16, so do not fit it to T20P, T10, T30, T40 or T50 equipment on the strength of a similar shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the whole charging head?\u003c\/strong\u003e No. It is the outer cover only. The contacts, terminals, wiring and cable are separate parts and are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the charger?\u003c\/strong\u003e No. It is a replacement housing for the head of an existing charger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy head stopped charging after I dropped it. Will a new cover fix it?\u003c\/strong\u003e Not by itself. A drop that cracks the cover can also damage the contacts or wiring inside. Switch off and disconnect the charger, open the head, and check those parts. If the head will not charge, the fault is electrical, not the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe inside of the old cover is brown near the contacts. What does that mean?\u003c\/strong\u003e Heat marks there point at a hot connection inside the head. Resolve that electrical problem before using the head again. A new cover would only hide the evidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old cover from the chamfered side and from underneath and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cover waterproof?\u003c\/strong\u003e No. A whole, seated cover reduces exposure to dust, residue and moisture, but it is not a seal. Keep the head off wet ground and out of spray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I keep using a head with a cracked cover?\u003c\/strong\u003e A cracked cover lets dust, residue and moisture reach the inner parts and leaves the cracked edge taking every connect and disconnect. Replace it once the electrical checks are clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Reuse the original fixings if their threads and heads are sound, or replace them separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most operators can. Switch the charger off and disconnect it from power first, photograph the head, check the contacts while the cover is off, seat the new cover flush, and start every fixing by hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque value for the cover fixings?\u003c\/strong\u003e DJI does not publish one for these fixings. Snug them evenly and stop before the moulding deforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is cracked, broken, loose or missing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I make the new cover last?\u003c\/strong\u003e Do not leave the head on the ground or trailer deck, disconnect by gripping the head rather than pulling the lead, and keep spray-side gloves and residue off it.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T20","offer_id":68079109275968,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"DJI T16","offer_id":68079109308736,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t20-oem-charger-head-cover-1.png?v=1794323973","url":"https:\/\/aresacres.com\/products\/dji-agras-t20-oem-charger-head-cover","provider":"Ares Acres","version":"1.0","type":"link"}