{"product_id":"dji-agras-t20-oem-nozzle-clip-2-pcs","title":"DJI Agras T20 OEM Nozzle Clip (2 Pcs)","description":"\u003cp\u003eThe DJI Agras T20 OEM Nozzle Clip (2 Pcs) is a pack of two orange moulded clips from the spray system, each a short ring with a square bore through its centre and a set of radial tabs standing out around its rim. As its name says, it is the clip that holds a nozzle at its place on the spray system; it does not meter, atomise or shut off the spray. It is identified for the DJI Agras T20 and T16. Operators usually find it while searching for a T20 nozzle clip, a T16 nozzle retainer, an orange T20 nozzle ring, a lost nozzle clip after cleaning, or a loose T16 nozzle. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T20 \/ DJI Agras T16 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T20 and T16, nozzle position on the spray system\u003c\/li\u003e\n\u003cli\u003eMatched by ring profile, square bore and radial tab layout against the clip you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spray system part, brand new, supplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach variant is a pack of two clips. If you want the match confirmed, photograph the clip you removed from the end, so the square bore and the tabs are visible, and from the side, and send it to us — we will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 × Nozzle Clip — orange moulded rings, each with a square bore and radial tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is two clips, not a nozzle.\u003c\/strong\u003e The pack holds the clips only.\u003c\/p\u003e\n\u003cp\u003eNot included: nozzles or nozzle tips, nozzle filters, check valves, seals and O-rings, the spray bar or nozzle mount, hoses and hose clamps, and any fasteners. Reuse the original nozzles and seals only if they are clean, undamaged and sealing.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the clip on the aircraft. If a seal, filter or other nozzle part is missing from the position you are rebuilding, tell us which one and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe nozzle clip is one of the smallest parts on the T20 and T16 spray system and one of the most handled. Every time a nozzle comes off for cleaning, a tip change or a winter strip-down, the clip comes off with it, and that is where most clips are lost.\u003c\/p\u003e\n\u003cp\u003eIts shape, as shown in the product images, has three working areas:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe ring\u003c\/strong\u003e — a short orange moulded body, open through its centre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe square bore\u003c\/strong\u003e — the hole through the ring is square rather than round, so the clip locates on a matching square seat instead of spinning on it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe radial tabs\u003c\/strong\u003e — tabs standing out around the rim, giving fingers something to grip when the clip is fitted and removed, and stiffening the ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bright orange is practical as much as anything: a clip dropped in grass, gravel or a bucket of rinse water is far easier to find in orange than in black.\u003c\/p\u003e\n\u003cp\u003eOver a working season a nozzle clip sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoval and refitting every time its nozzle is cleaned or changed\u003c\/li\u003e\n\u003cli\u003eSpray mix and chemical residue at every nozzle\u003c\/li\u003e\n\u003cli\u003eRinse water at the end of every day\u003c\/li\u003e\n\u003cli\u003eVibration from the airframe and pressure pulses from the spray system\u003c\/li\u003e\n\u003cli\u003eKnocks from crop, stubble and the ground at the low points of the aircraft\u003c\/li\u003e\n\u003cli\u003eSun and heat on the trailer between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the bore is square, a clip that has been forced on crooked, or has had its bore worn round by repeated fitting, is easy to recognise: it turns on its seat when the nozzle is twisted by hand. A sound clip does not.\u003c\/p\u003e\n\u003cp\u003eClips are replaced for three reasons: they get lost during cleaning, a tab or the ring cracks, or the square bore wears or splits so the clip no longer holds its nozzle firmly. What a clip is not replaced for is a spray problem, and that is the point this part turns on.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe nozzle clip's engineering role is retention. It holds the nozzle in its position on the spray system so the nozzle stays seated, stays pointed where it was set, and does not work loose under vibration.\u003c\/p\u003e\n\u003cp\u003eAt each nozzle position it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds the nozzle at its mounting point\u003c\/li\u003e\n\u003cli\u003eLocates on its seat through the square bore so it cannot simply spin round\u003c\/li\u003e\n\u003cli\u003eKeeps the nozzle from working loose under vibration and pressure\u003c\/li\u003e\n\u003cli\u003eLets the nozzle be removed and refitted by hand for cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters more on this part than on almost any other:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not set the flow rate; the nozzle tip and the pump do that\u003c\/li\u003e\n\u003cli\u003eIt does not atomise the spray or shape the spray pattern; the nozzle does that\u003c\/li\u003e\n\u003cli\u003eIt does not filter the liquid; the nozzle filter does that\u003c\/li\u003e\n\u003cli\u003eIt does not stop drips after shut-off; the check valve does that\u003c\/li\u003e\n\u003cli\u003eIt is not a seal; the seals and O-rings at the nozzle do the sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the clip sits between the nozzle and its seat, it also sets how consistently the nozzle can be refitted after cleaning. A clip that locates firmly on its square seat puts the nozzle back the same way every time; a worn clip lets each refit land a little differently.\u003c\/p\u003e\n\u003cp\u003eThat list is the honest case for and against this part. A missing or broken clip means a nozzle that is not held. A nozzle that sprays badly while firmly held is a nozzle, filter, valve or seal problem, and new clips will not change it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a clip holds the nozzle, it does not make the spray — so ask first whether the nozzle is loose or the spray is wrong\u003c\/h2\u003e\n\u003cp\u003eWhen a T20 or T16 starts spraying badly at one position, the clip is the part that gets noticed, because it is bright orange and easy to reach. It is rarely the cause. The clip's whole job is to hold the nozzle. If the nozzle is held, the clip is working, and the fault is somewhere in the nozzle assembly.\u003c\/p\u003e\n\u003cp\u003eSo the diagnosis turns on one question: is the nozzle loose, or is the spray wrong?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the clip is the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe clip is missing — lost during cleaning, or gone after a flight\u003c\/li\u003e\n\u003cli\u003eA tab or the ring is cracked or broken off\u003c\/li\u003e\n\u003cli\u003eThe square bore is split or worn so the clip turns or slides on its seat\u003c\/li\u003e\n\u003cli\u003eThe nozzle can be moved, rotated or wobbled by hand with the clip in place\u003c\/li\u003e\n\u003cli\u003eThe nozzle has changed its angle after a flight even though nobody touched it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the clip is not the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeak or uneven spray from a firmly held nozzle\u003c\/strong\u003e — clean or replace the nozzle tip and its filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDripping after the spray is switched off\u003c\/strong\u003e — a check valve symptom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA leak at the nozzle body with the nozzle held tight\u003c\/strong\u003e — a seal or O-ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo spray at one position\u003c\/strong\u003e — a blocked filter, a kinked hose or a blocked nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe same fault at every position\u003c\/strong\u003e — the pump, the flow system or the mix, not a clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA quick test:\u003c\/strong\u003e with the system at rest, take hold of the nozzle and try to move it. If it does not move, the clip is doing its job, so leave it and work on the nozzle, filter, valve or seal. If it moves, check the clip first.\u003c\/p\u003e\n\u003cp\u003eMake that test first, while that information is still cheap. It takes seconds, and it separates a clip problem from a spray problem before any parts are changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwap test for a spray fault:\u003c\/strong\u003e move the suspect nozzle to a healthy position, with its own clip. If the fault follows the nozzle, the nozzle is the cause. If it stays at the position, look at the hose, valve and filter there.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the nozzle clip when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe clip is missing from a nozzle position\u003c\/li\u003e\n\u003cli\u003eA crack in the ring or across a tab\u003c\/li\u003e\n\u003cli\u003eOne or more tabs broken off\u003c\/li\u003e\n\u003cli\u003eA square bore that is split, rounded or worn so the clip no longer locates\u003c\/li\u003e\n\u003cli\u003eA nozzle that moves, rotates or wobbles with the clip fitted\u003c\/li\u003e\n\u003cli\u003eA clip that has gone brittle or chalky after long exposure to sun and chemicals\u003c\/li\u003e\n\u003cli\u003eA clip that has been repaired with tape or adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they cause spray faults that are blamed on the clip:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe nozzle tip — wear, blockage or damage\u003c\/li\u003e\n\u003cli\u003eThe nozzle filter\u003c\/li\u003e\n\u003cli\u003eThe check valve at that nozzle\u003c\/li\u003e\n\u003cli\u003eThe seals and O-rings at the nozzle body\u003c\/li\u003e\n\u003cli\u003eThe hose and clamp feeding that position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the nozzle clip. It is replaced when it is lost, cracked, or no longer holds its nozzle firmly, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T20 OEM Nozzle Clip (2 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T20\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T20 and T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying — nozzle retention\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Moulded nozzle clip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 clips per pack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Short ring with a square bore and radial tabs around its rim\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Orange\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e At a nozzle position on the spray system, holding the nozzle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fitted by hand over its square seat to retain the nozzle; no tools or fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spray system part\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the tank, flush the spray system with clean water and let it drain\u003c\/li\u003e\n\u003cli\u003eWear gloves and eye protection; residue collects at the nozzles\u003c\/li\u003e\n\u003cli\u003eWork over a tray or a clean cloth so small parts cannot drop into grass or gravel\u003c\/li\u003e\n\u003cli\u003eCompare the new clip with one still fitted at another position: ring profile, square bore and tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the damaged clip, if any, by its tabs without levering against the nozzle body\u003c\/li\u003e\n\u003cli\u003eCheck the nozzle, its seal and its seat while they are exposed; clean off dried residue\u003c\/li\u003e\n\u003cli\u003eConfirm the nozzle is fully seated before fitting the clip\u003c\/li\u003e\n\u003cli\u003eLine the square bore up with its square seat and fit the clip by hand\u003c\/li\u003e\n\u003cli\u003eDo not force a clip that will not go on; check its orientation and the seat for residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTry to move the nozzle by hand; it should be held firmly\u003c\/li\u003e\n\u003cli\u003eFill the tank with clean water and run the pump on the ground\u003c\/li\u003e\n\u003cli\u003eWatch the spray from that position and compare it with its neighbours\u003c\/li\u003e\n\u003cli\u003eCheck for drips at the nozzle body under pressure\u003c\/li\u003e\n\u003cli\u003eKeep the spare clip from the pack in the field kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the nozzles and clips with the rest of the spray system at the end of each day. When removing nozzles for cleaning, put each clip straight into a tray with its nozzle; most clips are lost in the minute between removal and refitting. Look at every clip on the pre-flight walk-around — a missing orange ring is easy to spot.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThese clips are for operators and technicians keeping T20 and T16 nozzles held in place:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T20 operators replacing clips lost during nozzle cleaning\u003c\/li\u003e\n\u003cli\u003eDJI Agras T16 operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators who strip and clean nozzles every day\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding spray systems\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking spare clips in every field kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe nozzle is held firmly but sprays weakly or unevenly — clean or replace the nozzle tip and filter\u003c\/li\u003e\n\u003cli\u003eThe aircraft drips after shut-off — that is a check valve\u003c\/li\u003e\n\u003cli\u003eThe nozzle body leaks while firmly held — replace the seal or O-ring\u003c\/li\u003e\n\u003cli\u003eThe bar or mount the nozzle sits on is cracked or bent — that is the Spray Bar\u003c\/li\u003e\n\u003cli\u003eEvery position sprays badly — look at the pump, flow system and mix, not the clips\u003c\/li\u003e\n\u003cli\u003eYou fly a T20P, T10, T30, T40 or T50 — these clips are identified only for the T20 and T16\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe nozzle clip matters in one situation: when a nozzle is not held. A nozzle without its clip can work loose, change angle, or come off in flight, and a T20 or T16 spraying with a nozzle out of position lays down an uneven pattern without any warning on the controller.\u003c\/p\u003e\n\u003cp\u003eOutside that situation, the clip is the wrong part to buy. It does not set the flow, shape the spray, filter the liquid or stop drips. If the nozzle is held firmly and the spray is still wrong, a new clip will change nothing, and the time spent fitting it is time not spent on the nozzle, filter, valve or seal that is actually at fault.\u003c\/p\u003e\n\u003cp\u003eThere is also a quieter case for keeping spares. A clip is the one nozzle part that is routinely taken off in the field, by hand, in grass, mud or stubble, often at the end of a long day. A missing clip found at the morning walk-around is a two-minute fix with a spare in the kit, and a lost morning without one.\u003c\/p\u003e\n\u003cp\u003eThat is the honest case: buy clips because one is missing, cracked or no longer grips, and for no other reason. The test takes seconds — take hold of the nozzle and try to move it.\u003c\/p\u003e\n\u003cp\u003eBecause clips are small, bright and handled every day, they are lost far more often than they break. A pair covers one lost clip and leaves a spare in the field kit for the next one.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T20 OEM Nozzle Clip (2 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T20\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso listed for:\u003c\/strong\u003e DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T20; DJI Agras T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T20 and T16\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Nozzle clip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e At a nozzle position on the spray system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Holds the nozzle in place at its mounting point\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Orange moulded ring with a square bore and radial tabs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 2 clips\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Nozzles, filters, check valves, seals, spray bar, hoses\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical function:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Try to move the nozzle; if it is held, the clip is working and the spray fault is elsewhere\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Lost during cleaning, cracked ring or tab, worn or split square bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spray system part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T20 nozzle clip; T16 nozzle clip; T20 nozzle retainer; orange nozzle ring T20; Agras T16 nozzle holder; DJI T20 nozzle lock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a nozzle, not a nozzle filter, not a check valve, not a seal, not the spray bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T20 nozzle clip\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 nozzle clip\u003c\/p\u003e\n\u003cp\u003eDJI T16 T20 nozzle clip 2 pcs\u003c\/p\u003e\n\u003cp\u003eAgras T20 nozzle retainer\u003c\/p\u003e\n\u003cp\u003eT16 nozzle retainer clip\u003c\/p\u003e\n\u003cp\u003eT20 orange nozzle clip\u003c\/p\u003e\n\u003cp\u003eDJI T20 nozzle holder\u003c\/p\u003e\n\u003cp\u003eT20 lost nozzle clip\u003c\/p\u003e\n\u003cp\u003eAgras T16 nozzle ring\u003c\/p\u003e\n\u003cp\u003eT20 loose nozzle fix\u003c\/p\u003e\n\u003cp\u003eAgras T20 Nozzle Clip\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 OEM Nozzle Clip\u003c\/p\u003e\n\u003cp\u003eAgras T20 nozzle clip replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T16 Nozzle Clip\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 OEM Nozzle Clip\u003c\/p\u003e\n\u003cp\u003eAgras T16 nozzle clip replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T16 spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras nozzle parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 Nozzle Clip Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T20 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T20 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T20 nozzle clip?\u003c\/strong\u003e A small orange moulded ring with a square bore and radial tabs that holds a nozzle in place on the spray system. This pack contains two.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T20 and T16. Pick the variant for the aircraft you fly; each is a pack of two.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T20P?\u003c\/strong\u003e The T20P is a different aircraft from the T20. These clips are identified only for the T20 and T16, so do not fit them to a T20P, T10, T30, T40 or T50 on the strength of a similar shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a nozzle included?\u003c\/strong\u003e No. The pack contains two clips only. Nozzles, filters, valves and seals are separate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy nozzle sprays unevenly. Will new clips fix it?\u003c\/strong\u003e Only if the nozzle is loose. Take hold of it and try to move it. If it is held firmly, the clip is working; clean or replace the nozzle tip and filter instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe aircraft drips after shut-off. Is it the clip?\u003c\/strong\u003e No. Dripping after shut-off is a check valve symptom. The clip holds the nozzle; it does not stop the flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the bore square?\u003c\/strong\u003e A square bore locates on a square seat, so the clip cannot simply spin round on it once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the tabs for?\u003c\/strong\u003e They give your fingers something to grip when fitting and removing the clip, and they stiffen the ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old clip from the end and the side and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these usually break, or get lost?\u003c\/strong\u003e Mostly lost. Clips come off every time a nozzle is cleaned, and most go missing in the minute between removal and refitting. Work over a tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many do I need?\u003c\/strong\u003e One clip per nozzle position that is missing or damaged. A pack of two replaces one clip and leaves a spare for the field kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fly with a clip missing?\u003c\/strong\u003e The nozzle at that position is no longer held and can work loose, change angle or come off. Fit a clip before spraying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the clip a seal?\u003c\/strong\u003e No. Sealing is done by the seals and O-rings at the nozzle. If the nozzle body leaks while firmly held, replace the seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Make sure the nozzle is fully seated, line the square bore up with its seat, and press the clip on by hand. No tools or fasteners are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe nozzle changed angle after a flight. Is that the clip?\u003c\/strong\u003e Very likely, if nobody touched it. A clip that is cracked or has a worn square bore lets the nozzle turn or tilt under vibration. Check the clip, then check that the mount the nozzle sits on is straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a cable tie instead of a clip?\u003c\/strong\u003e Not as a repair. A tie does not locate on the square seat, can let the nozzle tilt, and can slip under vibration. Fit a clip and keep the tie for emergencies only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace a clip when it is lost, cracked or no longer holds the nozzle firmly. Check every clip on the pre-flight walk-around.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T20","offer_id":68079404220736,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true},{"title":"DJI T16","offer_id":68079404253504,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t20-oem-nozzle-clip-2-pcs-1.png?v=1794325568","url":"https:\/\/aresacres.com\/products\/dji-agras-t20-oem-nozzle-clip-2-pcs","provider":"Ares Acres","version":"1.0","type":"link"}