{"product_id":"dji-agras-t30-oem-battery-interface-10-pcs","title":"DJI Agras T30 OEM Battery Interface (10 Pcs)","description":"\u003cp\u003eThe DJI Agras T30 OEM Battery Interface (10 Pcs) is a pack of ten battery interface contact blocks for the DJI Agras T30 spray aircraft. Each one is the long, narrow black connector block of the battery connection, the point where the flight battery and the aircraft meet and every amp the aircraft flies on has to pass. As shown in the product images, each block carries two rows of many spring contact pins arranged in groups along its length, with a rounded latch end at each side. It belongs to the power system, it is identified for the DJI Agras T30, and it is supplied brand new, ten pieces to a pack. Operators and technicians usually look for it as a T30 battery interface, a T30 battery connector, an Agras T30 battery contact block, a T30 battery pins replacement, or the fix for a T30 battery connection that has burnt, pitted or loosened. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30, battery connection position\u003c\/li\u003e\n\u003cli\u003eMatched by block length, contact rows and groups, and latch ends against the interface you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM battery interface contact blocks, brand new, ten pieces per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhotograph the interface you removed, contact face up and square to the camera, beside a ruler if you have one, and send it to us. We will match it for you, so the right block arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10 × DJI Agras T30 OEM Battery Interface contact block, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTen blocks in one pack.\u003c\/strong\u003e The order is ten identical battery interface contact blocks. It is not ten different connectors, not a matched male-and-female pair, and not a cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat each block is:\u003c\/strong\u003e the black connector body with its two rows of spring contact pins and a rounded latch end at each side. That is the whole part.\u003c\/p\u003e\n\u003cp\u003eNot included: a flight battery, a battery case, a cable or wiring harness, a circuit board, screws or fixing hardware, solder, tools, or contact cleaner. Each of these is a separate item or stays with the aircraft or the pack.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The product images show one block on its own. Ten blocks of that kind are the order, and nothing else is.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eEvery sortie a T30 flies begins with a flight battery being pushed into the battery bay, and every sortie depends on what happens at the moment the battery's connector meets the aircraft's. The battery interface is the contact block at that meeting point. It carries the flight current from the pack into the aircraft, and it carries the pack's management signals alongside it.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, each block has these features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe body\u003c\/strong\u003e — a long, narrow black block that holds the contacts in line and in register\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe contacts\u003c\/strong\u003e — two rows of many spring contact pins, set in groups along the block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe latch ends\u003c\/strong\u003e — a rounded end at each side of the block, which locate it in its position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere it sits and what it touches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e the battery connection of the T30, where the flight battery and the aircraft meet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn one side:\u003c\/strong\u003e the flight battery's own connector, every time a pack is loaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn the other side:\u003c\/strong\u003e the aircraft's power and signal path into the airframe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e power, at the entrance of everything the aircraft does\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA battery contact block on a spray aircraft does more work than its size suggests. Over a season it sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA pack pushed in and pulled out after almost every sortie, many times a day\u003c\/li\u003e\n\u003cli\u003eHeavy current on every lift-off with a loaded tank\u003c\/li\u003e\n\u003cli\u003eHeat from that current, concentrated at any contact that is not touching cleanly\u003c\/li\u003e\n\u003cli\u003eDust, chaff, sand and spray residue carried in on the pack's connector\u003c\/li\u003e\n\u003cli\u003ePacks loaded at an angle or in a hurry, which bend and spread contacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlocks are replaced when contacts have burnt, pitted, discoloured, bent, spread or broken, or when the body has cracked or melted at a contact. They are rarely replaced for any other reason.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe battery interface's engineering role is contact. It makes and holds a low-resistance electrical joint between the flight battery and the aircraft, pin by pin, every time a pack is loaded.\u003c\/p\u003e\n\u003cp\u003eIn the T30's power system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarries flight current from the pack into the aircraft\u003c\/li\u003e\n\u003cli\u003eCarries the pack's management and status signals alongside the power\u003c\/li\u003e\n\u003cli\u003eHolds each contact in line with its mate so that every pin lands where it should\u003c\/li\u003e\n\u003cli\u003eLocates itself in its position by its rounded latch ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA contact joint has one property that matters more than any other: its resistance under load. A clean, well-sprung contact passes current with almost no loss. A pitted, burnt or weakly sprung one turns part of that current into heat, at exactly the point where the pack and the aircraft meet.\u003c\/p\u003e\n\u003cp\u003eWhat the interface does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not store energy; the flight battery does\u003c\/li\u003e\n\u003cli\u003eIt does not manage the pack; the battery's own management electronics do\u003c\/li\u003e\n\u003cli\u003eIt does not hold the pack in the aircraft; the battery bay does\u003c\/li\u003e\n\u003cli\u003eIt does not distribute power through the aircraft; the aircraft's power wiring and boards do\u003c\/li\u003e\n\u003cli\u003eIt does not charge anything; the charger works on the pack, not on this block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a contact that looks seated can still sag under lift-off current\u003c\/h2\u003e\n\u003cp\u003eA worn battery contact block is one of the hardest faults on the aircraft to see, because it looks right. The pack goes in. It seats. The aircraft powers up and shows the pack. On the ground, at the light current the aircraft draws when it is idle, a damaged contact passes enough for everything to read normally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fault only shows under load.\u003c\/strong\u003e At lift-off with a loaded tank, the current through every contact jumps. A contact with a pitted face, a burnt tip or a tired spring has more resistance than its neighbours, and under that current it drops voltage and makes heat. The aircraft sees the drop as a battery problem: a low-voltage warning, a pack that seems to empty early, a sortie cut short. Nothing about it looks like a connector problem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSo the fit does not decide it. The contacts do.\u003c\/strong\u003e With the aircraft powered down and the pack removed, inspect the block in good light:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat marks:\u003c\/strong\u003e brown, blue or black discolouration on a contact or the body around it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitting:\u003c\/strong\u003e a rough, cratered or eaten-away contact face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMelt:\u003c\/strong\u003e a softened, bubbled or deformed patch of the black body next to a contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e a contact that sits lower, wider or looser than the ones beside it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebris:\u003c\/strong\u003e grit, residue or corrosion packed between the contacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross the fault with your packs.\u003c\/strong\u003e If you run several packs, the interface fault has a signature: the same load-related warning arrives with every pack you fit to one aircraft, while the same packs fly normally on another. A fault that follows one pack from aircraft to aircraft is that pack's own connector, not this block.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClear these first, because they imitate a worn interface:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA pack that is simply flat or failing:\u003c\/strong\u003e test the same pack on another aircraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA pack not fully seated:\u003c\/strong\u003e reseat it and check it cannot move\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit or residue on the contacts:\u003c\/strong\u003e clean, dry and retest before condemning anything\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA damaged connector on the pack itself:\u003c\/strong\u003e inspect the pack's side of the joint as closely as this one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA heat mark is the evidence. A pack that seats is not.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the battery interface block when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrown, blue or black heat discolouration on any contact\u003c\/li\u003e\n\u003cli\u003eA pitted, burnt or eroded contact face\u003c\/li\u003e\n\u003cli\u003eSoftened, melted or deformed body material around a contact\u003c\/li\u003e\n\u003cli\u003eA bent, spread, sunken or broken contact\u003c\/li\u003e\n\u003cli\u003eA cracked body or a broken latch end\u003c\/li\u003e\n\u003cli\u003eCorrosion that does not clean off the contacts\u003c\/li\u003e\n\u003cli\u003eThe same low-voltage or battery warning under load with every pack on one aircraft, with heat marks found on the block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe flight battery's own connector, for the same kinds of damage\u003c\/li\u003e\n\u003cli\u003eThe pack itself, on another aircraft\u003c\/li\u003e\n\u003cli\u003eThe battery bay, for anything stopping full seating\u003c\/li\u003e\n\u003cli\u003eThe contacts, for debris that cleaning will remove\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA block found burnt on one aircraft is a reason to inspect the blocks on every other aircraft that shares the same packs, because a damaged pack connector carries its damage from bay to bay.\u003c\/p\u003e\n\u003cp\u003eThere is no service interval for the block. Replace it on evidence: heat, pitting, melt or a contact that no longer springs like its neighbours.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Battery Interface (10 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power — battery connection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Battery interface contact block\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 10 pieces per pack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Long, narrow black connector block with two rows of many spring contact pins in groups and a rounded latch end at each side\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black body with metal contacts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact count:\u003c\/strong\u003e Not published for this part; match the rows and groups against the block you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody material:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact plating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e T30 battery connection, where the flight battery meets the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fitted in place of the block removed, in the same orientation; the method follows how the original was mounted\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Flight battery, cable or harness, circuit board, fixing hardware, solder, tools, contact cleaner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM power-system component; electrical connector\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft fully down and remove every flight battery from it\u003c\/li\u003e\n\u003cli\u003eInspect the old block in good light and confirm the damage: heat marks, pitting, melt, bent or sunken contacts\u003c\/li\u003e\n\u003cli\u003eInspect the connector on every pack that has been fitted to this aircraft; a burnt pack connector will damage a new block\u003c\/li\u003e\n\u003cli\u003ePhotograph the old block in place, from above and from the side, so its orientation and routing are on record\u003c\/li\u003e\n\u003cli\u003eLay one new block beside the old one and compare length, contact rows and groups, and latch ends\u003c\/li\u003e\n\u003cli\u003eWork on a clean, dry bench with good light; contact blocks do not forgive grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the old block the way it was fitted, without levering against the contacts\u003c\/li\u003e\n\u003cli\u003eClean the seat the block sits in of residue, grit and any melted material\u003c\/li\u003e\n\u003cli\u003eFit the new block in the same orientation as the old one, using your photograph\u003c\/li\u003e\n\u003cli\u003eSeat both latch ends fully; a block that sits proud on one end loads its contacts unevenly\u003c\/li\u003e\n\u003cli\u003eDo not bend, file or reshape any contact to make it fit; if it does not fit, it is not the same block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoad a known good, fully charged pack and confirm the aircraft recognises it normally\u003c\/li\u003e\n\u003cli\u003eFly a short, light test hover before a loaded sortie\u003c\/li\u003e\n\u003cli\u003eAfter landing, feel the bay end of the pack and the area of the block for unusual heat\u003c\/li\u003e\n\u003cli\u003eRepeat with each pack in the rotation\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log, with the date and the packs tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Wipe each pack's connector before it goes into the bay, keep the bay free of chaff and residue, and look at the contacts whenever a pack is changed. A contact that has started to darken is a short bench job now, and a burnt pack connector later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting skill.\u003c\/strong\u003e Replacing a battery contact block is bench work for an operator or technician comfortable with multi-pin power connectors. If the original was soldered or fixed to a board, treat the job accordingly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThese blocks are for T30 operators and technicians who have found the battery contact itself to be the fault:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators whose aircraft gives load-related battery warnings with every pack\u003c\/li\u003e\n\u003cli\u003eAgras service centres and repair technicians who replace battery contacts as routine bench work\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators running several T30s who keep battery contacts on the shelf\u003c\/li\u003e\n\u003cli\u003eFleet managers who want spare blocks on hand for the season rather than one at a time\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own T30 with the bench skills to replace a connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne pack faults on every aircraft; that is the pack, and the part you need is the DJI Agras T30 OEM Intelligent Flight Battery\u003c\/li\u003e\n\u003cli\u003eThe contacts are clean, bright, level and evenly sprung; the block is not the fault\u003c\/li\u003e\n\u003cli\u003eThe contacts are only dirty; clean and retest first\u003c\/li\u003e\n\u003cli\u003eYou fly a T50; the DJI Agras T50 OEM Battery Interface Connector (Female \u0026amp; Male) is the part for that aircraft\u003c\/li\u003e\n\u003cli\u003eYou fly a T10, T16, T20 or T40; these blocks are identified for the T30 only\u003c\/li\u003e\n\u003cli\u003eYou need a cable or a harness; a contact block is not a cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe battery interface is the smallest part in the T30's power path and the one that hides its condition best.\u003c\/p\u003e\n\u003cp\u003eA worn battery contact does not stop the aircraft. The pack still seats, the aircraft still powers up, and on the ground every reading looks normal. The damage only speaks at lift-off, when the current through the joint jumps and a pitted or tired contact drops voltage and makes heat. What the operator sees then is a battery warning, an early return or a pack that seems tired, and what usually gets replaced is the pack.\u003c\/p\u003e\n\u003cp\u003eThat is the reason to look at the contacts, not the fit. Heat leaves marks. A brown or blue contact, a cratered face, a soft patch of the body beside a pin or a contact that has sunk below its neighbours tells you the block is the fault before another pack is set aside. A block that is clean, bright and even tells you to look elsewhere.\u003c\/p\u003e\n\u003cp\u003eA damaged block also damages what it touches. A burnt contact heats the mating contact on every pack loaded into it. Replacing the block stops that; leaving it spreads it through the rotation.\u003c\/p\u003e\n\u003cp\u003eThe pack of ten is for the way battery contacts are actually replaced: on more than one aircraft, more than once in a season, and on the bench rather than in the field. Ten blocks on the shelf means the next burnt contact is a short bench job, not a wait.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure whether the block you removed is this one, send us a photograph of its contact face and we will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Battery Interface (10 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Battery interface contact block\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Battery connection, where the flight battery meets the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Makes the electrical joint for flight current and battery signals between the pack and the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Long, narrow black block; two rows of many spring contact pins in groups; rounded latch end at each side\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the block you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 10 pieces\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact count and rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Flight battery, cable or harness, circuit board, fixing hardware, solder, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Inspect the contacts for heat marks, pitting, melt and sunken pins; a block can seat normally and still fail under lift-off current\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon misdiagnosis:\u003c\/strong\u003e A worn battery contact is blamed on the flight battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePack-crossing test:\u003c\/strong\u003e The same load-related warning with every pack on one aircraft points at the aircraft's battery connection; a fault that follows one pack is that pack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM power-system component; electrical connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated parts:\u003c\/strong\u003e DJI Agras T30 OEM Intelligent Flight Battery (the pack); DJI Agras T50 OEM Battery Interface Connector (Female \u0026amp; Male) (T50 part)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 battery interface; T30 battery connector; Agras T30 battery contact block; T30 battery pins; T30 battery port contacts; T30 burnt battery connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a flight battery, not a cable or harness, not the T50 interface connector, not identified for the T10, T16, T20 or T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 battery interface\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 battery connector\u003c\/p\u003e\n\u003cp\u003eAgras T30 battery contact block\u003c\/p\u003e\n\u003cp\u003eT30 battery interface 10 pcs\u003c\/p\u003e\n\u003cp\u003eT30 battery pins replacement\u003c\/p\u003e\n\u003cp\u003eT30 burnt battery connector\u003c\/p\u003e\n\u003cp\u003eT30 battery contacts pitted\u003c\/p\u003e\n\u003cp\u003eT30 low voltage warning under load\u003c\/p\u003e\n\u003cp\u003eAgras T30 battery port contacts\u003c\/p\u003e\n\u003cp\u003eDJI T30 OEM battery interface\u003c\/p\u003e\n\u003cp\u003eT30 battery connection repair\u003c\/p\u003e\n\u003cp\u003eAgras T30 power connector\u003c\/p\u003e\n\u003cp\u003eT30 battery bay connector\u003c\/p\u003e\n\u003cp\u003eAgras T30 battery not recognised connector\u003c\/p\u003e\n\u003cp\u003eT30 battery interface heat damage\u003c\/p\u003e\n\u003cp\u003eDJI T30 battery terminal block\u003c\/p\u003e\n\u003cp\u003eAgras T30 Battery Interface\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Battery Interface\u003c\/p\u003e\n\u003cp\u003eAgras T30 battery interface replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 power system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras batteries and charging\u003c\/p\u003e\n\u003cp\u003eDJI Agras battery connectors\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Battery Interface Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 battery interface?\u003c\/strong\u003e It is the long black contact block of the T30's battery connection, where the flight battery meets the aircraft. It carries the flight current and the battery's signals through two rows of spring contact pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many come in the pack?\u003c\/strong\u003e Ten. The order is ten identical battery interface contact blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30. Send us a photograph of the block you removed and we will match it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my T50?\u003c\/strong\u003e No. The T50 has its own battery interface connector, sold as the DJI Agras T50 OEM Battery Interface Connector (Female \u0026amp; Male).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it new?\u003c\/strong\u003e Yes. The blocks are supplied brand new.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy battery seats and the aircraft sees it. Can the interface still be bad?\u003c\/strong\u003e Yes. A pitted or tired contact passes enough current on the ground to read normally, then drops voltage and makes heat at lift-off. Inspect the contacts for heat marks, pitting and melt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI get a low-voltage warning with every battery on one aircraft. Is it the batteries?\u003c\/strong\u003e Probably not. When the same load-related warning arrives with every pack on one aircraft, and those packs fly normally elsewhere, the aircraft's battery connection is the first suspect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne battery faults on every aircraft. Do I need this?\u003c\/strong\u003e No. A fault that follows one pack is that pack or its own connector. Look at the DJI Agras T30 OEM Intelligent Flight Battery instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a burnt battery contact look like?\u003c\/strong\u003e Brown, blue or black discolouration on the contact or the body around it, a pitted or cratered contact face, or softened black plastic beside a pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I clean the contacts instead of replacing the block?\u003c\/strong\u003e If the contacts are only dirty, yes: clean, dry and retest. Heat marks, pitting, melt and bent or sunken pins do not clean away, and the block should be replaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a burnt interface damage my batteries?\u003c\/strong\u003e Yes. A burnt contact heats the mating contact on every pack loaded into it. Replacing the block stops the damage spreading through the rotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a cable or screws?\u003c\/strong\u003e No. Each piece is the contact block alone. Cables, boards, fixing hardware and tools are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e If you are comfortable with multi-pin power connectors on the bench, yes. Photograph the old block in place first, fit the new one in the same orientation, and never bend a contact to make it fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many contacts does it have?\u003c\/strong\u003e The contact count is not published for this part. Match the rows and groups against the block you removed, or send us a photograph.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy ten?\u003c\/strong\u003e Battery contacts are replaced on more than one aircraft and more than once in a season. Ten on the shelf makes the next one a short bench job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph the block and send it to us.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68081502552384,"sku":null,"price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-battery-interface-10-pcs-1.png?v=1794343263","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-battery-interface-10-pcs","provider":"Ares Acres","version":"1.0","type":"link"}