{"product_id":"dji-agras-t30-oem-landing-gear-mount-front-left-rear-right","title":"DJI Agras T30 OEM Landing Gear Mount (Front Left or Rear Right)","description":"\u003cp\u003eThe DJI Agras T30 OEM Landing Gear Mount (Front Left \u0026amp; Rear Right) is the black angled socket that joins a landing leg to the airframe of the DJI Agras T30 spray aircraft at the front-left and rear-right corners. It is a single moulded piece: a square flange plate on top with four screw holes and a ribbed face, an angled tube socket below it with a slot running down the socket wall, and a lug with a hole at the bottom of the socket, as shown in the product images. It belongs to the frame system, it is identified for the DJI Agras T30, and it is supplied brand new as one mount. The flange fastens to the aircraft and the socket receives the top of a landing leg, so the mount sets the angle at which that leg meets the ground. The front-right and rear-left corners take a different mount. Operators usually look for it as a T30 landing gear mount, a T30 landing leg socket, an Agras T30 landing gear connector or a T30 landing gear bracket after a hard landing has cracked the socket or torn the flange. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30, front-left and rear-right landing gear positions\u003c\/li\u003e\n\u003cli\u003eMatched by flange shape, hole pattern, socket angle, socket slot and bottom lug against the mount you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM landing gear mount, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote which corner of the aircraft the damaged mount came from, photograph it from the flange side and from the socket side, and send both to us. We will match it for you, so the right mount arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Landing Gear Mount (Front Left \u0026amp; Rear Right), as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne mount.\u003c\/strong\u003e A single landing gear mount, the shape that serves the front-left and rear-right corners. One mount fits one corner; two corners on the same diagonal need two mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the mount:\u003c\/strong\u003e the square flange plate with its four screw holes and ribbed face, the angled tube socket, the slot down the socket wall, and the lug with its hole at the bottom of the socket. These come with the mount because they are the mount.\u003c\/p\u003e\n\u003cp\u003eNot included: the screws that fasten the flange to the aircraft, any clamp screw or pin that passes through the socket or the lug, the landing leg tube, the shock pads, the landing gear tubes, and the mount for the front-right and rear-left corners. Each of these is a separate part or stays on the aircraft.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. If an image shows a floor, a box or anything not named above, it is not part of the order. The order is one mount.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eEach landing leg on the Agras T30 meets the airframe at a mount. The mount is the joint: on one side it is fastened flat to the aircraft, on the other it grips the top of the leg at the angle the landing gear was designed for. Every landing load that leg takes goes through it.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the mount has these working features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe flange plate\u003c\/strong\u003e — a square plate on top of the mount with four screw holes at its corners and a ribbed face, which fastens flat to the aircraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe angled socket\u003c\/strong\u003e — a tube socket below the flange that leans away from it, and receives the top of a landing leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe slot\u003c\/strong\u003e — a narrow slot running down the socket wall, so the socket can close on the leg when it is clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe bottom lug\u003c\/strong\u003e — a lug with a hole at the bottom of the socket, a fixing point at the lower end of the mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe black finish\u003c\/strong\u003e — a dark moulded surface across the flange and socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere it sits and what it touches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e the front-left or the rear-right corner of the T30's landing gear, where a leg meets the airframe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbove it:\u003c\/strong\u003e the aircraft structure that the flange is screwed to\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside it:\u003c\/strong\u003e the top of a landing leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e frame, at the joint between the body and the landing gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA landing gear mount on a spray aircraft of the T30's size works hard for its size. Over a season it sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery landing load from its leg, concentrated at the socket and the flange\u003c\/li\u003e\n\u003cli\u003eSide loads from landings on slopes, ruts and soft headlands\u003c\/li\u003e\n\u003cli\u003eLeverage from the full length of the leg when the aircraft is dragged, tipped or lands on one corner\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system through the airframe on every sortie\u003c\/li\u003e\n\u003cli\u003eSpray residue, fertiliser and mud working into the socket and around the screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMounts are replaced for a small number of reasons: a cracked socket, a split along or beyond the slot, a cracked or torn flange around its screw holes, a broken bottom lug, or a socket that no longer holds its leg firmly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe mount's engineering role is to fix the landing leg to the airframe at the right angle and pass the landing load from the leg into the aircraft.\u003c\/p\u003e\n\u003cp\u003eIn the T30's frame it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFastens flat to the aircraft through its square four-hole flange\u003c\/li\u003e\n\u003cli\u003eGrips the top of a landing leg in its socket, closed on the leg across its slot\u003c\/li\u003e\n\u003cli\u003eSets the angle at which that leg leaves the aircraft, which sets where its foot meets the ground\u003c\/li\u003e\n\u003cli\u003eCarries that leg's share of every landing load into the airframe\u003c\/li\u003e\n\u003cli\u003eProvides a lower fixing point through the lug at the bottom of the socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe angle is built into the moulding. The socket does not run straight down from the flange; it leans. That lean is what puts the leg where the landing gear needs it, and it is why the mount has a direction.\u003c\/p\u003e\n\u003cp\u003eWhat the mount does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not cushion landings; the shock pads do that\u003c\/li\u003e\n\u003cli\u003eIt does not form the leg or the lower landing gear; the landing gear tubes do that\u003c\/li\u003e\n\u003cli\u003eIt does not adjust; the angle is fixed in the moulding\u003c\/li\u003e\n\u003cli\u003eIt does not carry wiring or liquid; it is structure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the angled socket sets a direction, so the corner decides the mount\u003c\/h2\u003e\n\u003cp\u003eThe first question with a broken landing gear mount is not whether it is broken. A cracked socket or a torn flange is plain to see. The first question is which mount the corner takes, because the T30 does not use one mount at all four corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy there are two mounts.\u003c\/strong\u003e The socket on this mount leans away from its flange. A leaning socket has a direction: once the flange is fastened to the aircraft, the socket points its leg one particular way relative to the airframe. A mount that points its leg correctly at one corner points it wrongly at the corner beside it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy front left and rear right share a mount.\u003c\/strong\u003e Turn the aircraft half a turn on the ground and the front-left corner lands exactly where the rear-right corner was. The two corners on a diagonal are the same corner turned around, so the same shape serves both. The front-right and rear-left corners form the other diagonal, which is the mirror image, and they take the other mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSo identify the mount by the corner it came from:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront left or rear right:\u003c\/strong\u003e this mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront right or rear left:\u003c\/strong\u003e the other mount, which is not this part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot sure which corner:\u003c\/strong\u003e look at the airframe; the mounts that remain on the aircraft show which diagonal is missing one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoose mount in a parts box:\u003c\/strong\u003e send us a photograph of the flange side and the socket side and we will match it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOnce the corner is settled, confirm the fault is the mount:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack in the socket wall, especially running on from the end of the slot\u003c\/li\u003e\n\u003cli\u003eA crack or tear in the flange around a screw hole\u003c\/li\u003e\n\u003cli\u003eA broken or cracked bottom lug\u003c\/li\u003e\n\u003cli\u003eA leg that turns or slides in the socket after the clamp has been tightened\u003c\/li\u003e\n\u003cli\u003eA leg that sits at a visibly different angle from the leg on the other end of the same diagonal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClear these first, because they imitate a bad mount:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoose flange screws:\u003c\/strong\u003e a mount that rocks on loose screws makes a sound leg lean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA loose clamp on the socket:\u003c\/strong\u003e the leg turns in a sound socket until the clamp is tightened\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA bent leg tube:\u003c\/strong\u003e a bent tube in a sound mount looks like a bent mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA flattened shock pad:\u003c\/strong\u003e a pad that has lost its height lowers one corner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe diagonal rule is the one fact that prevents the commonest wrong order on this part: a mount ordered for the corner beside the broken one.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the landing gear mount when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack in the socket wall, at the slot or anywhere around the socket\u003c\/li\u003e\n\u003cli\u003eA crack, tear or chip in the flange, especially around the screw holes\u003c\/li\u003e\n\u003cli\u003eA broken, cracked or bent bottom lug\u003c\/li\u003e\n\u003cli\u003eA socket that no longer grips its leg when the clamp is tightened\u003c\/li\u003e\n\u003cli\u003eScrew holes that are elongated or stripped so the flange cannot be fastened firmly\u003c\/li\u003e\n\u003cli\u003eA leg angle at that corner that does not match its diagonal partner when the leg itself is true\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe flange screws, for looseness or loss\u003c\/li\u003e\n\u003cli\u003eThe clamp at the socket, for looseness\u003c\/li\u003e\n\u003cli\u003eThe landing leg tube, for bends and cracks\u003c\/li\u003e\n\u003cli\u003eThe shock pads, for flattening or loss\u003c\/li\u003e\n\u003cli\u003eThe aircraft structure the flange fastens to, for cracks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no service interval for the mount. Check it after every hard landing, tip-over or strike, and whenever a leg looks out of line.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Landing Gear Mount (Front Left \u0026amp; Rear Right)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePositions served:\u003c\/strong\u003e Front left and rear right (one diagonal); front right and rear left take a different mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Frame — landing gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Angled landing gear mount with flange and tube socket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Square flange plate with four screw holes and a ribbed face; angled tube socket with a slot down its wall; lug with a hole at the bottom\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSocket angle:\u003c\/strong\u003e Not published for this part; set by the moulding and matched against the mount you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Where a landing leg meets the T30 airframe, at the front-left or rear-right corner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Flange screwed to the aircraft through four holes; leg held in the socket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Flange screws, clamp screw or pin, landing leg tube, shock pads, the front-right and rear-left mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM frame component; landing gear joint\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNote the corner the damaged mount came from and confirm it is front left or rear right\u003c\/li\u003e\n\u003cli\u003ePhotograph the mount and the leg in place from the front and the side, so the reassembly matches\u003c\/li\u003e\n\u003cli\u003eHold the new mount beside the old one, flange to flange, and confirm the socket leans the same way\u003c\/li\u003e\n\u003cli\u003eInspect the leg tube, the shock pads and the aircraft structure around the flange, and replace anything cracked at the same time\u003c\/li\u003e\n\u003cli\u003eRemove the batteries and empty the tank, and support the aircraft so that corner carries no weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease the clamp at the socket and draw the leg out of the old mount\u003c\/li\u003e\n\u003cli\u003eRemove the flange screws and take the old mount off the aircraft\u003c\/li\u003e\n\u003cli\u003eClean the mounting face on the aircraft and the top of the leg of residue and grit\u003c\/li\u003e\n\u003cli\u003eFit the new mount with its socket leaning the same way as the original and start all four flange screws by hand before tightening any\u003c\/li\u003e\n\u003cli\u003eTighten the flange screws evenly, then seat the leg fully in the socket and secure it with its clamp; do not overtighten into the moulding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStand the aircraft on a flat, level floor and check it sits level\u003c\/li\u003e\n\u003cli\u003eCompare the leg angle at this corner with its diagonal partner\u003c\/li\u003e\n\u003cli\u003eRock the aircraft gently by hand and check nothing moves at the flange or in the socket\u003c\/li\u003e\n\u003cli\u003eMake a short, light test hover and a gentle landing before working with a loaded tank\u003c\/li\u003e\n\u003cli\u003eRecheck the flange screws and the clamp after the first working day, and record the change in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse residue out of the socket and from around the flange screws, look for hairline cracks running from the end of the slot, and check the screws are tight. A crack that starts at the slot grows from there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrder by diagonal.\u003c\/strong\u003e If a landing has damaged two mounts, check whether they are on the same diagonal. Two mounts on one diagonal are two of this part; one on each diagonal is one of this part and one of the other.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis mount is for T30 operators with a damaged front-left or rear-right landing gear joint:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators returning an aircraft to service after a hard landing or a tip-over\u003c\/li\u003e\n\u003cli\u003eOperators whose T30 has a cracked socket, a torn flange or a broken lug at the front-left or rear-right corner\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators running T30 aircraft on rough ground\u003c\/li\u003e\n\u003cli\u003eAgras service centres and repair technicians rebuilding T30 landing gear\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own T30 who keep a spare mount for each diagonal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe damaged mount is at the front-right or rear-left corner; that corner takes the other mount\u003c\/li\u003e\n\u003cli\u003eThe mount is sound and the leg tube is bent; that is a landing gear tube, such as the DJI Agras T30 OEM Landing Gear Aluminum Tube\u003c\/li\u003e\n\u003cli\u003eThe cushioning has worn out; that is the T40\/T30\/T20P Landing Gear Shock Pad Kit\u003c\/li\u003e\n\u003cli\u003eOnly the flange screws or the clamp are loose; tighten or replace the screws\u003c\/li\u003e\n\u003cli\u003eYou fly a T10, T20, T40 or T50; this mount is identified for the T30 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA landing gear mount looks like a simple part, and the failure is usually obvious. The trap is the order, not the diagnosis.\u003c\/p\u003e\n\u003cp\u003eThe socket on the mount leans. A leaning socket points its leg in a direction, and the T30's four legs do not all point the same way. So the T30 needs two mounts, and each serves two corners. Which two is a matter of geometry: turn the aircraft half a turn and front left becomes rear right. The corners on a diagonal are the same corner seen from the other end, so they share a shape. The other diagonal, front right and rear left, is the mirror image and takes the other mount.\u003c\/p\u003e\n\u003cp\u003eThat is why the part name carries two positions that sit at opposite ends of the aircraft. It is not a pair, and it is not a left and a right. It is one shape for one diagonal.\u003c\/p\u003e\n\u003cp\u003eThe wrong order this prevents is the obvious one: a mount ordered for the corner beside the broken one. It will bolt on, because the flange is square. It will point its leg the wrong way, because the socket leans.\u003c\/p\u003e\n\u003cp\u003eWhen it is this corner and this mount, a new one restores the joint: fit it leaning the same way as the original, tighten the four flange screws evenly, seat the leg, and check the aircraft stands level against its diagonal partner.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure which corner a mount came from, send us a photograph of the flange side and the socket side. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Landing Gear Mount (Front Left \u0026amp; Rear Right)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Landing gear mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePositions served:\u003c\/strong\u003e Front left and rear right\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther positions:\u003c\/strong\u003e Front right and rear left take a different mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Frame — landing gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Fastens a landing leg to the airframe at its designed angle and carries its landing load into the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Square four-hole flange with ribbed face; angled tube socket with a slot; lug with a hole at the bottom\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the mount you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and material:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Flange screws, clamp screw or pin, leg tube, shock pads, the other diagonal's mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey identification point:\u003c\/strong\u003e The socket leans, so the mount has a direction; corners on one diagonal share a shape, the other diagonal is the mirror\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Cracks at the slot, the flange holes or the lug; a leg angle that differs from its diagonal partner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM frame component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated parts:\u003c\/strong\u003e DJI Agras T30 OEM Landing Gear Aluminum Tube (landing gear tube); T40\/T30\/T20P Landing Gear Shock Pad Kit (cushioning)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 landing gear mount; T30 landing leg socket; Agras T30 landing gear connector; T30 landing gear bracket; T30 front left landing gear mount; T30 rear right landing gear mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the front-right or rear-left mount, not a pair, not a landing gear tube, not a shock pad, not a part for the T10, T20, T40 or T50\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 landing gear mount\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 landing gear mount front left\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 landing gear mount rear right\u003c\/p\u003e\n\u003cp\u003eAgras T30 landing leg socket\u003c\/p\u003e\n\u003cp\u003eT30 landing gear connector\u003c\/p\u003e\n\u003cp\u003eT30 landing gear bracket\u003c\/p\u003e\n\u003cp\u003eT30 landing gear mount cracked\u003c\/p\u003e\n\u003cp\u003eT30 landing leg loose in socket\u003c\/p\u003e\n\u003cp\u003eAgras T30 landing gear joint\u003c\/p\u003e\n\u003cp\u003eDJI T30 OEM landing gear mount\u003c\/p\u003e\n\u003cp\u003eT30 front left rear right mount\u003c\/p\u003e\n\u003cp\u003ewhich T30 landing gear mount do I need\u003c\/p\u003e\n\u003cp\u003eAgras T30 hard landing repair parts\u003c\/p\u003e\n\u003cp\u003eT30 landing gear flange socket\u003c\/p\u003e\n\u003cp\u003eAgras T30 spare landing gear mount\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Landing Gear Mount (Front Left \u0026amp; Rear Right)\u003c\/p\u003e\n\u003cp\u003eAgras T30 Landing Gear Mount (Front Left \u0026amp; Rear Right)\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Landing Gear Mount (Front Left \u0026amp; Rear Right)\u003c\/p\u003e\n\u003cp\u003eAgras T30 landing gear mount (front left \u0026amp; rear right) replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 frame parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras landing gear parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Landing Gear Mount (Front Left \u0026amp; Rear Right) Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 landing gear mount (front left \u0026amp; rear right)?\u003c\/strong\u003e It is the angled socket that joins a landing leg to the T30's airframe at the front-left or rear-right corner. Its square flange screws to the aircraft and its socket holds the top of the leg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30. Send us a photograph of the mount you removed and we will match it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does one mount cover front left and rear right?\u003c\/strong\u003e Turn the aircraft half a turn and front left lands where rear right was. Corners on the same diagonal are the same corner turned around, so they share one shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit front right or rear left?\u003c\/strong\u003e No. That diagonal is the mirror image and takes a different mount. The socket on this one would point the leg the wrong way there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a pair?\u003c\/strong\u003e No. The order is one mount. Two corners on the same diagonal need two of this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe flange is square. Can I not just turn it to fit the other corner?\u003c\/strong\u003e The flange will bolt on, but the socket leans. Turned to fit, it points the leg in the wrong direction. Order the mount for the corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know which corner my broken mount came from?\u003c\/strong\u003e Look at the aircraft: the mounts still fitted show which diagonal is missing one. Or send us a photograph of the flange side and the socket side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy leg turns in the socket. Is the mount broken?\u003c\/strong\u003e Tighten the clamp first. If the leg still turns, look for a crack running from the slot in the socket wall. A cracked socket cannot grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with screws?\u003c\/strong\u003e No. Flange screws, the clamp screw or pin, the leg tube and the shock pads are separate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e The material is not published for this part. It is a black moulded mount, as shown in the product images.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it new?\u003c\/strong\u003e Yes. The mount is supplied brand new.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a T10 or T20?\u003c\/strong\u003e No. This mount is identified for the T30 only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the shock pad kit?\u003c\/strong\u003e No. The T40\/T30\/T20P Landing Gear Shock Pad Kit is the cushioning. This mount is the structural joint between leg and airframe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, with the aircraft supported, the batteries out and the tank empty. Fit it leaning the same way as the original, tighten the four flange screws evenly, then seat and clamp the leg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo mounts broke in the same landing. Do I need two of these?\u003c\/strong\u003e Only if both are on the front-left to rear-right diagonal. One on each diagonal means one of this part and one of the other mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Send us a photograph and we will confirm it.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Left","offer_id":68086840459584,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true},{"title":"Right","offer_id":68087141892416,"sku":null,"price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-landing-gear-mount-front-left-rear-right-1.png?v=1794387272","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-landing-gear-mount-front-left-rear-right","provider":"Ares Acres","version":"1.0","type":"link"}