{"product_id":"dji-agras-t30-oem-left-hall-board","title":"DJI Agras T30 OEM Left Hall Board","description":"\u003cp\u003eThe DJI Agras T30 OEM Left Hall Board is the small left-side Hall sensor circuit board of the DJI Agras T30 and T10. As shown in the product images, it is an L-shaped black circuit board with four round gold screw pads, a rectangular gold contact pad on its upper arm, a U-shaped notch cut into one edge, and a sensor chip set in a dark round patch on the wider part of the board. A Hall board carries a Hall-effect sensor, which responds to the field of a nearby magnet, so the aircraft can tell whether something is in position. It belongs to the aircraft's sensing electronics, it is identified for the DJI Agras T30 and T10, and it is supplied brand new as one board. It is the left board of a pair, and the left and right boards are not mirror images of each other. Operators usually reach it while searching for a T30 Hall board, a T30 left Hall sensor board, a T10 Hall board or a T30 Hall sensor fault. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10, left-side Hall board position\u003c\/li\u003e\n\u003cli\u003eMatched by the L-shaped outline, the four gold screw pads, the gold contact pad and the round sensor patch against the board you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM sensing-electronics component, brand new, supplied as one left board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one left Hall board. It is not the right Hall board, not a pair and not a cable. If you want the match confirmed, photograph the board you removed flat on a table, component side up, and send it to us. We will match it for you, so the right part arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Left Hall Board, L-shaped black circuit board with four gold screw pads, a gold contact pad and a sensor chip in a dark round patch, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne board per order line.\u003c\/strong\u003e Each variant is a single left board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the board:\u003c\/strong\u003e the circuit board itself with its sensor chip, its gold contact pad and its four screw pads.\u003c\/p\u003e\n\u003cp\u003eNot included: the right Hall board, screws, any cable or ribbon that connects to it, the magnet it senses, any cover or housing around it, and tools. Each of these is a separate part.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the board on the aircraft. If a screw or cable from the old board is missing or damaged, tell us where it sat and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA Hall board is a small sensor board. Its Hall-effect sensor responds to the magnetic field of a magnet nearby, so the aircraft can tell whether a part carrying that magnet is in place. The T30 and T10 use a left and a right Hall board, and this is the left one.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, five features identify the left board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe L-shaped outline\u003c\/strong\u003e — a narrow upper arm rising from one end of a wider rectangular body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe gold contact pad\u003c\/strong\u003e — a rectangular gold pad with small test points across it, on the upper arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe round sensor patch\u003c\/strong\u003e — a dark round area on the wider body with a small sensor chip at its centre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe four gold screw pads\u003c\/strong\u003e — round gold-ringed holes near the corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe notch\u003c\/strong\u003e — a U-shaped cut-out in the edge below the upper arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe right Hall board is a different board. It has a wide ribbon connector and a small black socket, and it has no round sensor patch of the kind the left board carries. The two boards are not mirror images, and one cannot stand in for the other.\u003c\/p\u003e\n\u003cp\u003eA board like this fails in a small number of ways. A screw pad cracks when the board is over-tightened or the area around it takes a knock. Spray residue or moisture reaches the board and corrodes the gold contact pad or the chip's joints. Or the board is cracked across when the parts around it are damaged in a hard landing. Corrosion on the contact pad often looks like nothing more than a dull mark.\u003c\/p\u003e\n\u003cp\u003eThe exact location of the board on the aircraft, and the part it senses, are not published for this part. That is why the match is made by the board's own features and by the side it came from.\u003c\/p\u003e\n\u003cp\u003eThe board has no app setting. It is correct for the left position or it is not.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe board's engineering role is sensing. Its Hall-effect sensor turns the presence of a magnet into an electrical signal the aircraft can read.\u003c\/p\u003e\n\u003cp\u003eOn the aircraft it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarries the Hall-effect sensor for the left position\u003c\/li\u003e\n\u003cli\u003eIs held in place through its four screw pads\u003c\/li\u003e\n\u003cli\u003eMakes its connection through its gold contact pad\u003c\/li\u003e\n\u003cli\u003eReports whether the magnet it faces is in position\u003c\/li\u003e\n\u003cli\u003eCan be replaced on its own once its screws are released\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not move anything; it only reports\u003c\/li\u003e\n\u003cli\u003eIt does not stand in for the right Hall board\u003c\/li\u003e\n\u003cli\u003eIt does not carry the magnet; the magnet is on the part it senses\u003c\/li\u003e\n\u003cli\u003eIt does not fix a fault in the cable or the board it reports to\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA Hall sensor reads a magnet, not a part. If the magnet it faces is missing, cracked out of its seat or moved, the board reports exactly what it sees, and a new board will report the same thing.\u003c\/p\u003e\n\u003cp\u003eThe sensor type, signal output, supply voltage and the part it senses are not published for this part. The match is made by outline, pads and side.\u003c\/p\u003e\n\u003cp\u003eDimensions and weight are not published for this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — left and right are two different boards, so the side and the round patch decide the order\u003c\/h2\u003e\n\u003cp\u003eThe words left Hall board and right Hall board sound like a mirrored pair. On the T30 and T10 they are not. The left board carries a round sensor patch with a chip at its centre and a rectangular gold contact pad. The right board carries a wide ribbon connector and a small black socket. Ordering by the word Hall alone, or ordering the opposite side, is the usual mistake.\u003c\/p\u003e\n\u003cp\u003eThe way to avoid it is to read the board by its side and its features. Note which side the board came from before it is removed. Then look at it: a round dark patch with a chip in the middle and a gold contact pad means the left board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms that point at the left Hall board:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cracked board or a screw pad broken out at a corner\u003c\/li\u003e\n\u003cli\u003eGreen or white corrosion on the gold contact pad or around the sensor chip\u003c\/li\u003e\n\u003cli\u003eA chip lifted, chipped or burnt in the round patch\u003c\/li\u003e\n\u003cli\u003eA sensing fault on the left side that stays after the magnet, the screws and the connection are checked\u003c\/li\u003e\n\u003cli\u003eA sensing fault that appeared after a hard landing or a wash-down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat proves it:\u003c\/strong\u003e with the aircraft powered off and the battery removed, release the board and look at it under good light and magnification. Check the four screw pads, the gold contact pad and the round patch. Clean any residue gently and look again. Then check the part it faces: if the magnet is missing, cracked or out of its seat, the board is reporting correctly and the fault is on the other side of the gap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck these first, because they produce similar symptoms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe magnet the board senses, for a crack, a missing magnet or a shifted seat\u003c\/li\u003e\n\u003cli\u003eThe board's screws, for looseness that lets it sit at the wrong distance\u003c\/li\u003e\n\u003cli\u003eThe contact or cable the board connects through, for corrosion or a poor seat\u003c\/li\u003e\n\u003cli\u003eThe right Hall board, if the fault is on the right side rather than the left\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not explain:\u003c\/strong\u003e a fault on the right side, a motor, pump or spreader that will not run, or a warning from a different sensor. Those sit in the right Hall board, the drive parts or the sensor named in the warning.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the board when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cracked board or a broken screw pad\u003c\/li\u003e\n\u003cli\u003eCorrosion on the gold contact pad that does not clean back to bright metal\u003c\/li\u003e\n\u003cli\u003eA damaged, lifted or burnt sensor chip\u003c\/li\u003e\n\u003cli\u003eA left-side sensing fault that stays with the magnet, screws and connection all proved sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe magnet the board faces\u003c\/li\u003e\n\u003cli\u003eThe board's screws and how flat it sits\u003c\/li\u003e\n\u003cli\u003eThe contact or cable it connects through\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA board that still reads after a wash-down is not proved sound. Corrosion on a contact pad can come and go with moisture, so a fault that appears in damp weather and clears when dry is worth a close look at the pad.\u003c\/p\u003e\n\u003cp\u003eThere is no published service interval for the board. It is replaced when it is damaged, corroded beyond cleaning or proved faulty, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Left Hall Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30 and DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Sensing electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Hall sensor board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSide:\u003c\/strong\u003e Left\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e L-shaped black circuit board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Four gold screw pads, rectangular gold contact pad on the upper arm, sensor chip in a dark round patch, U-shaped edge notch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor:\u003c\/strong\u003e Hall-effect sensor; type and output not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e Gold contact pad; mating part not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black board with gold pads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Left-side Hall board position; exact location not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Screwed in place through its four screw pads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws and cables are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the board is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM sensing-electronics component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft off and remove the battery\u003c\/li\u003e\n\u003cli\u003eClean and dry the area around the board so no residue falls onto the electronics\u003c\/li\u003e\n\u003cli\u003ePhotograph the board in place, so its orientation and any connection are on record\u003c\/li\u003e\n\u003cli\u003eConfirm the board came from the left position\u003c\/li\u003e\n\u003cli\u003eLay the new board beside the old one and compare the outline, pads, contact pad and round patch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWork on a clean, dry surface and handle the board by its edges\u003c\/li\u003e\n\u003cli\u003eRelease the four screws and keep them in a tray\u003c\/li\u003e\n\u003cli\u003eLift the old board straight out and note how it sat\u003c\/li\u003e\n\u003cli\u003eCheck the magnet it faces, and the seat around it, for cracks or residue\u003c\/li\u003e\n\u003cli\u003eSet the new board the same way round as the old one and start all four screws by hand\u003c\/li\u003e\n\u003cli\u003eSnug the screws evenly; DJI does not publish a torque figure for these screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRefit any cover over the board\u003c\/li\u003e\n\u003cli\u003eFit the battery and power the aircraft on\u003c\/li\u003e\n\u003cli\u003eCheck that the left-side sensing warning, if there was one, has cleared\u003c\/li\u003e\n\u003cli\u003eExercise the part the board senses and confirm the aircraft reads it correctly\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Keep spray residue and wash-down water away from the board's area. When the aircraft is serviced, look at the gold contact pad for dulling or green marks, and check that the screws are snug. A clean, dry, firmly seated board is the whole of its maintenance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis board is for operators and technicians whose T30 or T10 has a confirmed fault at the left Hall board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators with a left-side sensing fault traced to the board\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators whose left Hall board is cracked or corroded\u003c\/li\u003e\n\u003cli\u003eAgras service centres repairing sensing electronics after a hard landing or water damage\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking small electronic boards for T30 and T10 aircraft\u003c\/li\u003e\n\u003cli\u003eTechnicians matching a removed board by side and features\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe board you removed has a ribbon connector and a black socket — that is the DJI Agras T30 OEM Right Hall Board\u003c\/li\u003e\n\u003cli\u003eThe magnet the board faces is cracked, missing or out of its seat — the board is reporting correctly\u003c\/li\u003e\n\u003cli\u003eThe board is sound and only its screws were loose — tighten them and test again\u003c\/li\u003e\n\u003cli\u003eYou fly a T20 and the fault is in the spreading system — the DJI Agras T20 OEM Spreading System Hall Plate is the T20 part\u003c\/li\u003e\n\u003cli\u003eYou fly a T16, T20, T40 or T50 — this board is identified for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eLeft and right Hall boards are named as a pair, so it is natural to expect two mirrored copies of one board. On the T30 and T10 they are two different boards. The left one carries the round sensor patch with its chip and a rectangular gold contact pad. The right one carries a wide ribbon connector and a small black socket. Neither can stand in for the other.\u003c\/p\u003e\n\u003cp\u003eThe way through is to order by side and confirm by features. Note the side before the board comes out. Then check the board in your hand: a round dark patch and a gold contact pad on the upper arm mean left.\u003c\/p\u003e\n\u003cp\u003eThat is the case for a moment of care at the bench. The side and the round patch together settle the order, while that information is still cheap.\u003c\/p\u003e\n\u003cp\u003eIt is also the case for keeping a sound board. A Hall sensor reports the magnet it faces. If the magnet is missing or moved, a new board will report the same fault, and the repair is on the other side of the gap.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Left Hall Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30, DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30; DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Hall sensor board, left side\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Sensing electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Senses a nearby magnet so the aircraft can tell whether a part is in position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e L-shaped black circuit board; four gold screw pads, gold contact pad, sensor chip in a dark round patch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSide:\u003c\/strong\u003e Left — not a mirror of the right board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Right Hall board, screws, cables, magnet, covers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A Hall sensor reports the magnet it faces; check the magnet before the board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked board or screw pad, corroded contact pad, damaged sensor chip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM sensing-electronics component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 Hall board; T30 left Hall sensor board; T10 Hall board; Agras T30 Hall sensor; DJI T30 Hall board left\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the DJI Agras T30 OEM Right Hall Board; not the DJI Agras T20 OEM Spreading System Hall Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 left Hall board\u003c\/p\u003e\n\u003cp\u003eDJI T30 Hall board\u003c\/p\u003e\n\u003cp\u003eT30 left Hall sensor board\u003c\/p\u003e\n\u003cp\u003eT30 Hall sensor board\u003c\/p\u003e\n\u003cp\u003eDJI T10 Hall board\u003c\/p\u003e\n\u003cp\u003eT10 left Hall board\u003c\/p\u003e\n\u003cp\u003eAgras T30 Hall sensor\u003c\/p\u003e\n\u003cp\u003eT30 Hall sensor fault\u003c\/p\u003e\n\u003cp\u003eT30 Hall board replacement\u003c\/p\u003e\n\u003cp\u003eDJI T30 sensor board\u003c\/p\u003e\n\u003cp\u003eAgras T10 Hall sensor board\u003c\/p\u003e\n\u003cp\u003eT30 T10 Hall board left\u003c\/p\u003e\n\u003cp\u003eAgras T30 Left Hall Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Left Hall Board\u003c\/p\u003e\n\u003cp\u003eAgras T30 left hall board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Left Hall Board\u003c\/p\u003e\n\u003cp\u003eAgras T10 Left Hall Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Left Hall Board\u003c\/p\u003e\n\u003cp\u003eAgras T10 left hall board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 electronics\u003c\/p\u003e\n\u003cp\u003eDJI Agras sensor boards\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone sensor board\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Left Hall Board Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 left Hall board?\u003c\/strong\u003e A small L-shaped black circuit board carrying a Hall-effect sensor for the left position. It has four gold screw pads, a gold contact pad and a sensor chip in a dark round patch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a Hall board do?\u003c\/strong\u003e Its Hall-effect sensor responds to the field of a nearby magnet, so the aircraft can tell whether the part carrying that magnet is in position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10. It is not identified for the T16, T20, T40 or T50.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the left and right Hall boards the same board?\u003c\/strong\u003e No. The left board carries a round sensor patch and a gold contact pad. The right board carries a ribbon connector and a small black socket. They are not interchangeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know which side I need?\u003c\/strong\u003e Note the side the board came from, then check it: a dark round patch with a chip and a gold contact pad on the upper arm mean the left board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I get both boards?\u003c\/strong\u003e No. Each variant is one left board. The right board is listed separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with screws or a cable?\u003c\/strong\u003e No. It is the board alone. Reuse the screws if their threads are sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich part does it sense?\u003c\/strong\u003e That is not published for this part. The board is matched by its outline, its pads, its round patch and the side it came from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy sensing warning came back after a new board. Why?\u003c\/strong\u003e A Hall sensor reports the magnet it faces. If that magnet is cracked, missing or out of its seat, a new board reports the same thing. Check the magnet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T20 spreading system Hall plate?\u003c\/strong\u003e No. The T20 part belongs to a different aircraft. This board is identified for the T30 and T10.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe contact pad looks dull. Is that a fault?\u003c\/strong\u003e It can be. Dulling or green marks are corrosion. Clean it gently; if it does not come back to bright metal, replace the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, with care. Power off, remove the battery, release the four screws, lift the old board out, set the new one the same way round and snug the screws evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually damages it?\u003c\/strong\u003e Hard landings that crack the board or a screw pad, over-tightened screws, and spray residue or wash-down water reaching the contact pad.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is damaged, corroded beyond cleaning or proved faulty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the board need calibrating after fitting?\u003c\/strong\u003e No calibration procedure is published for this part. Power on and check that the aircraft reads the sensed part correctly.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086843474240,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68086843507008,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-left-hall-board-1.png?v=1794387278","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-left-hall-board","provider":"Ares Acres","version":"1.0","type":"link"}