{"product_id":"dji-agras-t30-oem-load-sensor-module-no-3-4","title":"DJI Agras T30 OEM Load Sensor Module (No. 3 \u0026 4)","description":"\u003cp\u003eThe DJI Agras T30 OEM Load Sensor Module (No. 3 \u0026amp; 4) is the pair of weighing sensors that serves positions 3 and 4 of the payload weighing system on the DJI Agras T30 spray aircraft. It is one module made of two black weighing sensor housings, each on its own lead, with the two leads joining into a branched cable that ends in one black connector, as shown in the product images. It is identified for the DJI Agras T30 and is supplied brand new. Operators look for it as a T30 load sensor, a T30 weighing sensor No. 3 and 4, an Agras T30 load cell or a T30 weighing module when the aircraft reports the wrong payload weight, a sensor housing has been cracked, or the branched lead has been cut or crushed. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the payload weighing positions No. 3 and 4 of the DJI Agras T30\u003c\/li\u003e\n\u003cli\u003eMatched by position designation, sensor housings, branched lead and connector against the module you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM load sensor module, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhotograph the sensor you are replacing in place, with any position marking on its housing and the route of its lead in view, and send it to us. We will match it for you, so the right pair arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Load Sensor Module (No. 3 \u0026amp; 4): two black weighing sensor housings, each on its own lead, joined into one branched cable with one black connector, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTwo sensors, one module.\u003c\/strong\u003e The two sensor housings share one branched cable and one connector, so they are supplied and fitted together. They are not two separate sensors, and they are not the whole weighing system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePositions 3 and 4 only.\u003c\/strong\u003e The designation No. 3 \u0026amp; 4 is the address of this pair in the weighing system. It covers those two positions and no others.\u003c\/p\u003e\n\u003cp\u003eNot included: the sensors for any other position, the load collection board the sensors report to, the spray tank, the spreading system, mounting screws, cable ties and any tool. Keep your original fixings when you remove the old module.\u003c\/p\u003e\n\u003cp\u003eIf the board that gathers the weighing signals has failed and the sensors are sound, the DJI Agras T30 OEM Load Collection Board is the part to look at. If the weighing fault is on the spreading system, the DJI Agras T30 OEM Spreading System Weighing Assembly is the complete spreader weighing set of three sensors, harness and board.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. If an image shows anything not named above, it is not part of the module.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA T30 knows how much it is carrying because it weighs it, and it weighs it at more than one point. Each point has its own sensor, and each sensor has a number. This module is the pair that serves positions 3 and 4: two sensor housings sharing one branched cable and one connector.\u003c\/p\u003e\n\u003cp\u003eThe module's working features, as shown in the product images:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo black weighing sensor housings,\u003c\/strong\u003e each with screw points at its corners for fixing at its position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLabels on the housings,\u003c\/strong\u003e one of them marked 3, which identify the position each sensor serves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA black lead from each housing,\u003c\/strong\u003e running to the point where the two join\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA branched cable,\u003c\/strong\u003e where the two leads meet and run on together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne black connector\u003c\/strong\u003e at the end of the branched cable, which plugs the pair into the weighing system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere it sits and what it touches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e payload weighing, on the T30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor housings:\u003c\/strong\u003e fixed at weighing positions 3 and 4, where they carry part of the load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranched cable:\u003c\/strong\u003e routed through the airframe from the two positions to a common point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e plugged into the weighing system, which gathers the signals from every position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeighing sensors on a spray aircraft carry a changing load and live in a wet, dirty place. Over a season they see:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepeated filling and emptying, so the sensors work under load all day\u003c\/li\u003e\n\u003cli\u003eSpray residue and fertiliser dust settling on housings, leads and the connector\u003c\/li\u003e\n\u003cli\u003eRinse water when the aircraft is washed down\u003c\/li\u003e\n\u003cli\u003eShock and vibration from flight and from landings with a full load\u003c\/li\u003e\n\u003cli\u003eLeads pulled or pinched when covers, the tank or the spreader are removed and refitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLoad sensor modules are replaced for a short list of reasons: a sensor housing cracked or distorted by a hard landing, a lead or the branched cable crushed, cut or chafed through, a connector damaged or corroded, or weighing at these positions that stays wrong after cleaning, reseating and calibration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe module's role is measurement at two of the weighing positions. Each sensor housing carries its share of the payload and turns that load into a signal. The two signals travel on their own leads into the branched cable and leave through the one connector, and the weighing system combines them with the signals from the other positions to give the payload weight the operator sees.\u003c\/p\u003e\n\u003cp\u003eIn the weighing system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSenses the load at position 3 through one sensor housing\u003c\/li\u003e\n\u003cli\u003eSenses the load at position 4 through the other sensor housing\u003c\/li\u003e\n\u003cli\u003eCarries both signals through their leads into the branched cable\u003c\/li\u003e\n\u003cli\u003eConnects both positions to the weighing system through one connector\u003c\/li\u003e\n\u003cli\u003eKeeps the two leads in a fixed route, away from moving parts and covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFigures for the module, such as load capacity per sensor, accuracy, signal type, lead lengths and connector pin assignments, are not published for this part. The module is replaced like for like: the same two sensors at the same two positions, with the cable routed the same way.\u003c\/p\u003e\n\u003cp\u003eWhat a new load sensor module does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not cure a damaged sensor at any position other than 3 or 4\u003c\/li\u003e\n\u003cli\u003eIt does not cure a fault in the load collection board that gathers the weighing signals\u003c\/li\u003e\n\u003cli\u003eIt does not cure a tank or spreader that is not seated squarely, so the load sits partly off the sensors\u003c\/li\u003e\n\u003cli\u003eIt does not cure readings thrown off by residue packed around a sensor housing\u003c\/li\u003e\n\u003cli\u003eIt does not remove the need to run any calibration the app offers after fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — find which position is wrong before you choose a pair\u003c\/h2\u003e\n\u003cp\u003eA wrong payload weight on the T30 can come from any weighing position, from the cable between the sensors and the board, from the board itself, or from the way the load sits. This module covers exactly two of those positions. So the question is not whether the weighing is wrong, but where it is wrong, and whether that place is position 3 or position 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStart with the free checks, in this order:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean.\u003c\/strong\u003e Brush and rinse residue from around every sensor housing and dry them. Packed residue can carry part of the load around a sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat.\u003c\/strong\u003e Check the tank or spreader sits squarely and fully, so the load rests on the sensors as it should.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector.\u003c\/strong\u003e Unplug and reseat the connector of the No. 3 \u0026amp; 4 module and look for corrosion or bent contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibrate.\u003c\/strong\u003e Run any calibration the app offers with the aircraft empty, then check the reading with a known load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocate.\u003c\/strong\u003e Inspect each sensor housing and its lead. Read the position marking on any housing that is cracked, distorted or has a damaged lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point at the No. 3 \u0026amp; 4 module:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cracked or distorted sensor housing marked for position 3 or position 4\u003c\/li\u003e\n\u003cli\u003eA crushed, cut or chafed lead from either of those two housings, or a damaged branched cable\u003c\/li\u003e\n\u003cli\u003eA damaged or corroded connector on this module\u003c\/li\u003e\n\u003cli\u003eWeighing still wrong after cleaning, seating and calibration, with the damage found at positions 3 or 4\u003c\/li\u003e\n\u003cli\u003eWeighing trouble that began after a hard landing on the side where positions 3 and 4 sit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClear these first, because they imitate a failed pair:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamage at another position:\u003c\/strong\u003e a sensor that is not 3 or 4 needs the module for its own position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA load collection board fault:\u003c\/strong\u003e the sensors are sound and the board that gathers them is not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA tank or spreader not seated squarely:\u003c\/strong\u003e the load is not resting on the sensors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidue packed around a housing:\u003c\/strong\u003e part of the load is bypassing a sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA loose or corroded connector:\u003c\/strong\u003e the pair is sound and badly connected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen the cleaning, seating, connector and calibration are cleared, and the damage is found on a housing or lead marked for position 3 or 4, this module is the part. When the damage is anywhere else, it is not, however close the fault looks.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the No. 3 \u0026amp; 4 load sensor module when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe sensor housing at position 3 or position 4 is cracked, distorted or damaged\u003c\/li\u003e\n\u003cli\u003eA lead from either housing, or the branched cable, is crushed, cut or chafed through\u003c\/li\u003e\n\u003cli\u003eThe module's connector is damaged, or corroded beyond what cleaning clears\u003c\/li\u003e\n\u003cli\u003eWeighing stays wrong after cleaning, seating, reseating and calibration, with the fault traced to positions 3 or 4\u003c\/li\u003e\n\u003cli\u003eThe pair was damaged in a hard landing or a crash\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe sensors at every other weighing position\u003c\/li\u003e\n\u003cli\u003eThe load collection board\u003c\/li\u003e\n\u003cli\u003eHow squarely the tank or spreader sits on the sensors\u003c\/li\u003e\n\u003cli\u003eResidue packed around the sensor housings\u003c\/li\u003e\n\u003cli\u003eThe seating and contacts of the module's connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for this module. It is replaced when it has failed or been damaged, not on a calendar.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Load Sensor Module (No. 3 \u0026amp; 4)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the payload weighing positions No. 3 and 4 of the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying (payload weighing)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Load sensor module: two weighing sensors on one branched cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePosition designation:\u003c\/strong\u003e No. 3 \u0026amp; 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 module: two sensor housings, their leads, one branched cable and one connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor housings:\u003c\/strong\u003e Two black housings with corner screw points and position labels\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable:\u003c\/strong\u003e Black lead from each housing, joined into one branched cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e One black connector at the end of the branched cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black housings, cable and connector; white labels\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad capacity per sensor:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccuracy and signal type:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and lead lengths:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Weighing positions 3 and 4 of the T30 payload weighing system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Each sensor housing fixed at its own position with your original fixings; cable routed as the original; connector plugged into the weighing system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Sensors for other positions, load collection board, tank, spreader, fixings, cable ties and tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e App calibration where the app offers it; no adjustment compensates for a damaged sensor or lead\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM payload weighing component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the tank or spreader and clean residue from around the sensors\u003c\/li\u003e\n\u003cli\u003eClear the free checks first: cleaning, seating, connector and calibration\u003c\/li\u003e\n\u003cli\u003eFind the damaged sensor and read its position marking; confirm it is 3 or 4\u003c\/li\u003e\n\u003cli\u003ePhotograph the old module in place: both housings at their positions, their orientation, the cable route and the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug the connector by its housing, never by the cable\u003c\/li\u003e\n\u003cli\u003eRelease the cable from its clips and ties without stretching it\u003c\/li\u003e\n\u003cli\u003eRemove the fixings from both sensor housings, keeping them together and in order\u003c\/li\u003e\n\u003cli\u003eLift the old module out, drawing the cable through without catching it\u003c\/li\u003e\n\u003cli\u003eClean both sensor seats of residue and corrosion and dry them\u003c\/li\u003e\n\u003cli\u003eFit the sensor marked 3 at position 3 and the sensor marked 4 at position 4, each in the orientation of the one it replaces\u003c\/li\u003e\n\u003cli\u003eRefit every fixing firmly; no torque figure is published, so do not force them\u003c\/li\u003e\n\u003cli\u003eRoute the cable as the original, clear of moving parts and covers, and plug the connector in fully\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that no lead is pinched under a sensor housing or a cover\u003c\/li\u003e\n\u003cli\u003eRefit the battery and power the aircraft up\u003c\/li\u003e\n\u003cli\u003eRun any calibration the app offers with the aircraft empty\u003c\/li\u003e\n\u003cli\u003eCheck the reported weight empty and then with a known load\u003c\/li\u003e\n\u003cli\u003eMake a short supervised test before returning to work\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the positions changed in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse residue from around the sensor housings and the connector after work and let them dry. Whenever the tank, spreader or a nearby cover comes off, look along both leads and the branched cable for chafe before refitting. Recheck the reported weight with a known load from time to time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis module is for operators and technicians keeping payload weighing accurate on a DJI Agras T30:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators whose sensor at position 3 or 4 has been damaged\u003c\/li\u003e\n\u003cli\u003eCommercial applicators who rely on the reported payload weight to plan loads and routes\u003c\/li\u003e\n\u003cli\u003eAgras service centres and repair technicians rebuilding the weighing system\u003c\/li\u003e\n\u003cli\u003eTechnicians repairing a T30 after a hard landing with a full load\u003c\/li\u003e\n\u003cli\u003eTechnicians who have traced a weighing fault to positions 3 or 4\u003c\/li\u003e\n\u003cli\u003eFleet managers who keep position-specific weighing spares in the service kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe damaged sensor is at a position other than 3 or 4\u003c\/li\u003e\n\u003cli\u003eThe sensors are sound and the board that gathers their signals has failed; look at the DJI Agras T30 OEM Load Collection Board\u003c\/li\u003e\n\u003cli\u003eThe weighing fault is on the spreading system; the DJI Agras T30 OEM Spreading System Weighing Assembly is the complete spreader weighing set\u003c\/li\u003e\n\u003cli\u003eCleaning, reseating the connector or running calibration cured the reading\u003c\/li\u003e\n\u003cli\u003eThe tank or spreader was not seated squarely and reseating it cured the reading\u003c\/li\u003e\n\u003cli\u003eYou fly a T10 or any Agras model other than the T30; this module is identified for the T30 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe No. 3 \u0026amp; 4 in the name is the most important thing about this module. It is an address, not a description. The T30 weighs its payload at more than one point, each point has its own number, and this module serves two of them: position 3 and position 4. A sensor at any other position will look much the same, sit in a similar housing and fail in the same way, and this pair will not replace it.\u003c\/p\u003e\n\u003cp\u003eThat is why the first job is finding which position is wrong. Clean, seat, reseat and calibrate, then go from sensor to sensor and read the marking on any housing that is cracked or has a damaged lead. If the marking is 3 or 4, this is the module. If it is anything else, this pair is the wrong order, and the right one is the module for that position.\u003c\/p\u003e\n\u003cp\u003eThe pair is also the right order when both of its sensors share the trouble, because they share one branched cable and one connector. A crushed branched cable or a corroded connector takes out both positions at once, and the module puts both back together.\u003c\/p\u003e\n\u003cp\u003eFit each sensor at its own numbered position in its original orientation, route the cable as it was, calibrate, and check the reported weight with a known load before returning to work.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure which position your damaged sensor serves, send us a photograph of it in place, with its marking in view, and we will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Load Sensor Module (No. 3 \u0026amp; 4)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the payload weighing positions No. 3 and 4 of the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Load sensor module: two weighing sensors on one branched cable with one connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePosition designation:\u003c\/strong\u003e No. 3 \u0026amp; 4; covers weighing positions 3 and 4 only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying (payload weighing)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Senses the payload load at positions 3 and 4 and passes both signals to the weighing system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Two black sensor housings with corner screw points and position labels; black leads joined into one branched cable; one black connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 module (two sensors)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePublished figures:\u003c\/strong\u003e Load capacity, accuracy, signal type, dimensions, lead lengths and weight not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Sensors for other positions, load collection board, tank, spreader, fixings, cable ties and tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Read the position marking on the damaged sensor housing; this module is the match only for positions 3 and 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked sensor housing, crushed or cut lead or branched cable, damaged or corroded connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM payload weighing component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 load sensor; T30 weighing sensor No. 3 and 4; Agras T30 load cell; T30 weighing module; DJI T30 load sensor 3 4; T30 payload weight sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the DJI Agras T30 OEM Load Collection Board, not the DJI Agras T30 OEM Spreading System Weighing Assembly, not the sensors for any other position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 load sensor module No. 3 and 4\u003c\/p\u003e\n\u003cp\u003eT30 load sensor\u003c\/p\u003e\n\u003cp\u003eT30 weighing sensor No. 3\u003c\/p\u003e\n\u003cp\u003eT30 weighing sensor No. 4\u003c\/p\u003e\n\u003cp\u003eAgras T30 load cell\u003c\/p\u003e\n\u003cp\u003eT30 weighing module\u003c\/p\u003e\n\u003cp\u003eDJI T30 payload weight wrong\u003c\/p\u003e\n\u003cp\u003eT30 weight sensor replacement\u003c\/p\u003e\n\u003cp\u003eAgras T30 weighing sensor pair\u003c\/p\u003e\n\u003cp\u003eDJI T30 load sensor 3 and 4\u003c\/p\u003e\n\u003cp\u003eT30 weighing system parts\u003c\/p\u003e\n\u003cp\u003eAgras T30 payload weighing sensor\u003c\/p\u003e\n\u003cp\u003eDJI T30 tank weight reading wrong\u003c\/p\u003e\n\u003cp\u003eT30 load sensor cable damaged\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Load Sensor Module (No. 3 \u0026amp; 4)\u003c\/p\u003e\n\u003cp\u003eAgras T30 Load Sensor Module (No. 3 \u0026amp; 4)\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Load Sensor Module (No. 3 \u0026amp; 4)\u003c\/p\u003e\n\u003cp\u003eAgras T30 load sensor module (no. 3 \u0026amp; 4) replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 spraying parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras weighing sensors\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Load Sensor Module (No. 3 \u0026amp; 4) Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 load sensor module No. 3 and 4?\u003c\/strong\u003e It is the pair of weighing sensors for positions 3 and 4 of the T30 payload weighing system: two black sensor housings on one branched cable with one connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does No. 3 \u0026amp; 4 mean?\u003c\/strong\u003e It is the address of the pair. The T30 weighs its payload at more than one position, and this module serves positions 3 and 4. It does not replace a sensor at any other position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know which position my damaged sensor is?\u003c\/strong\u003e Read the marking on its housing. In the product images one housing carries a label marked 3. If you cannot read it, send us a photograph of the sensor in place and we will match it for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one sensor or two?\u003c\/strong\u003e Two sensors, sharing one branched cable and one connector. They are supplied and fitted together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T30 load collection board?\u003c\/strong\u003e No. The DJI Agras T30 OEM Load Collection Board gathers the weighing signals. This module is two of the sensors that feed it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T30 spreading system weighing assembly?\u003c\/strong\u003e No. The DJI Agras T30 OEM Spreading System Weighing Assembly is the complete spreader weighing set of three sensors, harness and board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy T30 shows the wrong payload weight. Do I need this?\u003c\/strong\u003e Clean around the sensors, check the tank or spreader is seated squarely, reseat the connector and run calibration first. If the reading is still wrong and the damage is at position 3 or 4, this module is the part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly one of the two sensors is damaged. Do I still need the pair?\u003c\/strong\u003e The two sensors share one cable and one connector, so the module is supplied as a pair. Send us a photograph and we will confirm the match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to calibrate after fitting?\u003c\/strong\u003e Run any calibration the app offers with the aircraft empty, then check the reading with a known load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can each sensor carry?\u003c\/strong\u003e Load capacity, accuracy and signal type are not published for this part. We match the module against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with screws?\u003c\/strong\u003e No. Fixings are not included; keep the originals when you remove the old module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old module and send it to us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it new?\u003c\/strong\u003e Yes. The module is supplied brand new.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a T10, T20 or T40?\u003c\/strong\u003e It is identified for the T30 only. Fitment to other models is not claimed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I make it last?\u003c\/strong\u003e Rinse residue from the sensors and connector after work, keep the leads clear of covers and moving parts, and recheck the reported weight with a known load from time to time.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086255419712,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-load-sensor-module-no-3-4-1.png?v=1794382428","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-load-sensor-module-no-3-4","provider":"Ares Acres","version":"1.0","type":"link"}