{"product_id":"dji-agras-t30-oem-orchard-branch-spray-pressure-retaining-valve","title":"DJI Agras T30 OEM Orchard Branch Spray Pressure Retaining Valve","description":"\u003cp\u003eThe DJI Agras T30 OEM Orchard Branch Spray Pressure Retaining Valve is the black cross-shaped valve body fitted in the orchard, or branch, spray layout of the DJI Agras T30. As shown in the product images, it has four ports: a tall, smooth, round inlet standing up from the top, a collar beneath that inlet held by two screws, two threaded side outlets that end in hose barbs, and a third threaded outlet running down from the bottom that also ends in a hose barb. Seen face on, the three outlets and the inlet make a cross. It belongs to the spraying system, it is identified for the DJI Agras T30, and it is supplied brand new as one valve. As the name says, it is a pressure retaining valve: its job is to hold pressure in the branch lines it feeds rather than let them drain. Operators usually reach it while searching for a T30 orchard spray valve, a T30 branch spray valve, a T30 pressure retaining valve, a T30 orchard kit valve or a cracked T30 spray valve barb. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30, pressure retaining valve position in the orchard (branch) spray layout\u003c\/li\u003e\n\u003cli\u003eMatched by the cross-shaped body, the smooth top inlet, the two-screw collar and the three threaded barbed outlets against the valve you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spraying-system component, brand new, supplied as one valve body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one valve. It is not a nozzle, not a solenoid vent valve, not a hose and not the pump head. If you want the match confirmed, photograph the valve you removed face on, so the inlet and all three outlets show, and send it to us. We will match it for you, so the right part arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Orchard Branch Spray Pressure Retaining Valve, black, cross-shaped, with a smooth top inlet, a two-screw collar and three threaded barbed outlets, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne valve per order line.\u003c\/strong\u003e The variant is a single valve body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the valve:\u003c\/strong\u003e the body, the smooth top inlet, the collar with its two screws, the two threaded barbed side outlets and the threaded barbed bottom outlet, all as one assembly.\u003c\/p\u003e\n\u003cp\u003eNot included: hoses, hose clamps, threaded nuts or fittings that screw onto the outlets, nozzles, the spray lances or branch pipes, the pump, the tank and tools. Each of these is a separate part.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the valve on the aircraft. If a nut, clamp or hose from the old orchard layout is missing or split, tell us where it sat and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe DJI Agras T30 can be set up with an orchard, or branch, spray layout for tree and vine work, where the liquid is carried out to branch lines rather than only to the standard spray positions. The pressure retaining valve is the cross-shaped body in that layout that takes liquid in at the top and passes it out through three barbed outlets.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, five features identify it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe smooth top inlet\u003c\/strong\u003e — a tall, plain round tube standing up from the body, with no thread and no barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe collar\u003c\/strong\u003e — a flat collar under the inlet, held by two screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe two side outlets\u003c\/strong\u003e — one each side, each with a threaded section and a hose barb at its tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe bottom outlet\u003c\/strong\u003e — a third outlet running straight down, also threaded and ending in a hose barb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe colour and form\u003c\/strong\u003e — black throughout, the four ports arranged as a cross\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe word valve covers several different parts on a T30. The T30 Spray Rod Solenoid Vent Valve Cable serves an electrically switched valve and carries wiring. The pressure retaining valve has no wiring and no plug. It is a mechanical body with one inlet and three outlets.\u003c\/p\u003e\n\u003cp\u003eA part like this fails in a small number of ways. A barb snaps or cracks, usually from a hose being pulled sideways or the aircraft landing on the branch lines. A thread is damaged when a fitting is cross-threaded on. The body cracks from a knock. Or residue builds up inside so the valve no longer behaves as it did. A snapped barb is easy to see; a hairline crack at the root of a barb often is not.\u003c\/p\u003e\n\u003cp\u003eThe barbs are the weakest points. Each one is a short tip carrying a hose, and a hose that is pulled or snagged loads that tip at its root. A crack there can weep only under pressure, so it shows while spraying and disappears when the system is still.\u003c\/p\u003e\n\u003cp\u003eThe valve carries no wiring and has no app setting. Its job is to take liquid in at one port, pass it out at three, and hold pressure in the lines it feeds.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe valve's engineering role is distribution and pressure retention in the orchard layout. It joins one supply line to three branch lines and, as its name states, retains pressure in those lines.\u003c\/p\u003e\n\u003cp\u003eIn the orchard layout it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTakes liquid in through the smooth top inlet\u003c\/li\u003e\n\u003cli\u003ePasses it out through the two side outlets and the bottom outlet\u003c\/li\u003e\n\u003cli\u003eHolds each branch hose on a barb, with a threaded section behind it\u003c\/li\u003e\n\u003cli\u003eRetains pressure in the branch lines rather than letting them drain\u003c\/li\u003e\n\u003cli\u003eCan be replaced on its own once the hoses are released\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not pump liquid; the water pump does that\u003c\/li\u003e\n\u003cli\u003eIt does not atomise the spray; the nozzles at the ends of the lines do that\u003c\/li\u003e\n\u003cli\u003eIt does not measure flow; the flow meter does that\u003c\/li\u003e\n\u003cli\u003eIt is not switched electrically; it has no wiring and no plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePressure retention matters at the ends of the lines. A branch line that drains between passes has to refill before the nozzles at its end spray evenly again; a line held at pressure is ready at once. That is the behaviour the name describes.\u003c\/p\u003e\n\u003cp\u003eThe opening pressure, the flow rate and the internal design of the valve are not published for this part. The match is made by shape, port layout and barbs, not by a pressure figure.\u003c\/p\u003e\n\u003cp\u003eMaterial, dimensions, weight and thread size are not published for this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a valve is matched by its ports, so count the inlet and outlets before blaming the name\u003c\/h2\u003e\n\u003cp\u003eOn a T30 the word valve is used for more than one part, and an orchard layout has several fittings that look alike at a glance. The pressure retaining valve is the one with four ports arranged as a cross: a smooth inlet on top and three threaded barbed outlets. A fitting with two or three ports, a part with wiring, or a nozzle is something else.\u003c\/p\u003e\n\u003cp\u003eThe way to avoid a wrong order is to read the part by its ports. Count them. Look at the top: a plain round tube with no barb is this valve's inlet. Look at the collar for its two screws. Then look at the three outlets: each has a thread and a barb. If all of that matches, the fault is in this valve or its hoses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms that point at the valve:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA barb snapped off, or cracked at its root\u003c\/li\u003e\n\u003cli\u003eA weep at the root of a barb or at the collar that appears only while spraying\u003c\/li\u003e\n\u003cli\u003eA damaged or cross-threaded thread on one of the outlets\u003c\/li\u003e\n\u003cli\u003eA crack in the body after a knock or a hard landing\u003c\/li\u003e\n\u003cli\u003eBranch lines that drain between passes when they did not before, with hoses and clamps sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat proves it:\u003c\/strong\u003e with the aircraft powered off, the battery removed and the spraying system drained and rinsed, take the valve off and look at it under good light. Follow each barb from tip to root. Check each thread. Look at the collar and its two screws. A hairline crack often shows as a line of residue left behind after the valve is wiped. Then fill the system with clean water and watch the valve while the pump runs: a weep that appears only under pressure is in the valve or at a joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck these first, because they produce similar symptoms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe hoses on each barb, for a split end or a loose clamp\u003c\/li\u003e\n\u003cli\u003eThe nuts or fittings on the threaded outlets, for a cross-thread or a cracked nut\u003c\/li\u003e\n\u003cli\u003eThe nozzles at the ends of the branch lines, for a blocked tip or a worn seal\u003c\/li\u003e\n\u003cli\u003eThe supply hose to the top inlet, for a split or a loose joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not explain:\u003c\/strong\u003e a pump that will not run, a flow reading that does not match the setting, a fault on the standard spray lances, or a warning about a solenoid valve. Those sit in the pump, the flow meter, the spray lances or the solenoid vent valve and its cable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the valve when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA snapped or cracked barb\u003c\/li\u003e\n\u003cli\u003eA crack anywhere in the body or at the collar\u003c\/li\u003e\n\u003cli\u003eA damaged thread on an outlet that will no longer take its fitting squarely\u003c\/li\u003e\n\u003cli\u003eA weep from the body itself, not from a hose or clamp, during a water test\u003c\/li\u003e\n\u003cli\u003eBranch lines that will not hold pressure with every hose, clamp and nozzle sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe hose ends and clamps on each barb\u003c\/li\u003e\n\u003cli\u003eThe fittings on the threaded outlets\u003c\/li\u003e\n\u003cli\u003eThe nozzles at the ends of the branch lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA barb with a crack at its root can still hold a hose when the system is still. It is not proved sound because it holds at rest; the test is a water run under pressure.\u003c\/p\u003e\n\u003cp\u003eThere is no published service interval for the valve. It is replaced when it is cracked, broken at a barb, damaged at a thread or no longer holds the lines, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Orchard Branch Spray Pressure Retaining Valve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying — orchard (branch) spray layout\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Pressure retaining valve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 valve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Cross-shaped body: smooth round inlet on top, two-screw collar, two threaded barbed side outlets, one threaded barbed bottom outlet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e Four — one inlet, three outlets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose connections:\u003c\/strong\u003e Barbs on the three outlets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpening pressure:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlow rate:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThread size:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e In the T30 orchard (branch) spray layout, between the supply line and the branch lines\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Hoses pushed onto the barbs and secured; fittings on the threaded outlets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — hoses, clamps, nuts and nozzles are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the valve is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spraying-system component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft off and remove the battery\u003c\/li\u003e\n\u003cli\u003eDrain the tank and run clean water through the spraying system, then drain it again\u003c\/li\u003e\n\u003cli\u003ePhotograph the valve in place face on, so the hose on each port is on record\u003c\/li\u003e\n\u003cli\u003eLabel each hose with the port it came off: top, left, right or bottom\u003c\/li\u003e\n\u003cli\u003eLay the new valve beside the old one and compare the inlet, the collar and all three outlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves; treat any residue at the valve as the product that was last sprayed\u003c\/li\u003e\n\u003cli\u003eRelease each hose clamp and ease each hose straight off its barb; do not lever it sideways\u003c\/li\u003e\n\u003cli\u003eRelease any fitting on a threaded outlet by hand where it allows\u003c\/li\u003e\n\u003cli\u003eCheck every hose end for splits and trim or replace a damaged end\u003c\/li\u003e\n\u003cli\u003eFit the new valve the same way round as the old one, with the inlet on top\u003c\/li\u003e\n\u003cli\u003ePush each hose fully onto its barb and secure it; start any threaded fitting by hand so it runs on square\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFill the tank with clean water and run the pump\u003c\/li\u003e\n\u003cli\u003eWatch each barb, each thread and the collar for weeps while the system is under pressure\u003c\/li\u003e\n\u003cli\u003eCheck that the branch lines spray evenly at their nozzles\u003c\/li\u003e\n\u003cli\u003eStop the pump and check that the branch lines hold rather than drain\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the orchard layout after every day of spraying so residue does not dry inside the valve or hide a crack at a barb. Route the branch hoses so they cannot be snagged or landed on; a hose pulled sideways loads its barb at the root, and that is where these valves break.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis valve is for operators and technicians running the orchard (branch) spray layout on a T30 whose pressure retaining valve is cracked, broken at a barb or no longer holds the lines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators spraying orchards, vineyards and tree crops with the branch layout\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators who switch their T30 between the standard and orchard layouts\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding T30 orchard layouts after a hard landing\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking small spraying fittings for T30 aircraft\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own T30 in orchards who service the spray lines themselves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe leak is at a hose end or a clamp, with the valve and its barbs sound — replace the hose or clamp\u003c\/li\u003e\n\u003cli\u003eA nozzle drips or sprays unevenly — check the nozzle and its seal; the T30 Sprinkler Nozzle Sealing Ring \u0026amp; Connector Nut Kit covers that seating hardware\u003c\/li\u003e\n\u003cli\u003eThe fault is on an electrically switched valve or its wiring — that is the T30 Spray Rod Solenoid Vent Valve Cable or the valve it serves\u003c\/li\u003e\n\u003cli\u003eThe leak is at a barbed connector on the pump — that is the T30 Water Pump Head\u003c\/li\u003e\n\u003cli\u003eYou fly a T10, T16, T20, T40 or T50 — this valve is identified only for the T30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eOn a T30 the word valve does not identify a part. A solenoid valve is switched electrically and carries wiring. A nozzle has a valve in its name on some aircraft and sprays at the end of a line. The orchard pressure retaining valve is neither: it is a mechanical body with one smooth inlet on top and three threaded barbed outlets, arranged as a cross.\u003c\/p\u003e\n\u003cp\u003eThe way through is to name the part by its ports, not by the word. Count four. Check that the top port is a plain tube with no barb. Check the two screws on the collar. Check that all three outlets carry a thread and a barb. If the part in your hand matches, this is it; if it has wiring, fewer ports or a spray tip, it is a different part.\u003c\/p\u003e\n\u003cp\u003eThat one look is the case for the valve. It is quick, it needs no tools and it settles which of several similarly named parts has failed, while that information is still cheap.\u003c\/p\u003e\n\u003cp\u003eIt is also the case for keeping a sound valve. If every barb is whole, every thread takes its fitting and the body holds in a water test, a fault in the orchard layout is in a hose, a clamp or a nozzle, and a new valve will not change it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Orchard Branch Spray Pressure Retaining Valve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Pressure retaining valve, orchard (branch) spray layout\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Between the supply line and the branch lines of the T30 orchard layout\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Distributes liquid from one inlet to three outlets and retains pressure in the branch lines\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black cross-shaped body; smooth top inlet, two-screw collar, three threaded barbed outlets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — no wiring, no plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 valve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Hoses, clamps, nuts, nozzles, spray lances, pump, tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Count the ports: one smooth inlet and three threaded barbed outlets identify this valve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Snapped or cracked barb, crack at a barb root, damaged thread, cracked body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpening pressure:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spraying-system component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 orchard spray valve; T30 branch spray valve; T30 pressure retaining valve; T30 orchard kit valve; Agras T30 four-way spray valve\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a solenoid vent valve, not a nozzle, not the T30 Water Pump Head, not a hose fitting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 pressure retaining valve\u003c\/p\u003e\n\u003cp\u003eDJI T30 orchard spray valve\u003c\/p\u003e\n\u003cp\u003eT30 branch spray valve\u003c\/p\u003e\n\u003cp\u003eT30 orchard branch spray valve\u003c\/p\u003e\n\u003cp\u003eAgras T30 orchard kit valve\u003c\/p\u003e\n\u003cp\u003eT30 pressure retaining valve replacement\u003c\/p\u003e\n\u003cp\u003eT30 spray valve barb broken\u003c\/p\u003e\n\u003cp\u003eT30 orchard spray layout parts\u003c\/p\u003e\n\u003cp\u003eDJI T30 four-way spray valve\u003c\/p\u003e\n\u003cp\u003eAgras T30 branch spray parts\u003c\/p\u003e\n\u003cp\u003eDJI T30 spray valve\u003c\/p\u003e\n\u003cp\u003eT30 spraying system valve\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Orchard Branch Spray Pressure Retaining Valve\u003c\/p\u003e\n\u003cp\u003eAgras T30 Orchard Branch Spray Pressure Retaining Valve\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Orchard Branch Spray Pressure Retaining Valve\u003c\/p\u003e\n\u003cp\u003eAgras T30 orchard branch spray pressure retaining valve replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 spray parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras spraying system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone orchard spray parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Orchard Branch Spray Pressure Retaining Valve Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 orchard branch spray pressure retaining valve?\u003c\/strong\u003e The black cross-shaped valve body fitted in the T30 orchard, or branch, spray layout. It has a smooth inlet on top, a collar held by two screws, two threaded barbed side outlets and a threaded barbed bottom outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a pressure retaining valve do?\u003c\/strong\u003e As the name says, it holds pressure in the lines it feeds rather than letting them drain. Its opening pressure is not published for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30. It is not identified for the T10, T16, T20, T40 or T50.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the solenoid vent valve?\u003c\/strong\u003e No. A solenoid valve is switched electrically and has wiring. This valve has no wiring and no plug; it is a mechanical body with four ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know I have the right valve?\u003c\/strong\u003e Count the ports. One smooth round inlet on top with no barb, a collar with two screws, and three outlets that each carry a thread and a hose barb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need it for the standard spray setup?\u003c\/strong\u003e It is fitted in the orchard (branch) spray layout. If your T30 runs only the standard layout and that layout is the one with the fault, look at the standard spray parts instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne barb is cracked but the hose still holds. Can I leave it?\u003c\/strong\u003e A crack at a barb root often weeps only under pressure. Run the system with clean water and watch it; if it weeps, replace the valve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with hoses or clamps?\u003c\/strong\u003e No. It is the valve alone. Reuse the hoses and clamps if they are sound, and replace any split hose end separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thread size are the outlets?\u003c\/strong\u003e That is not published for this part. The valve is matched by its shape, its ports and its barbs against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy nozzles drip after the pump stops. Is it this valve?\u003c\/strong\u003e It can be, if the branch lines no longer hold. Check the nozzles, their seals and every hose and clamp first; if all are sound and the lines still drain, the valve is next.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, for most operators. Drain and rinse the system, label each hose, ease the hoses off their barbs, fit the new valve with the inlet on top and push each hose back fully onto its barb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually breaks it?\u003c\/strong\u003e Hoses pulled or snagged sideways, landings on the branch lines, and fittings cross-threaded onto an outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it change my spray rate?\u003c\/strong\u003e Not by itself. The rate is set in the app and delivered by the pump; the valve distributes the liquid and holds pressure in the branch lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is cracked, broken at a barb, damaged at a thread or no longer holds the lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I find a hairline crack?\u003c\/strong\u003e Rinse and wipe the valve, then look under good light at the root of each barb and around the collar. A crack often shows as a thin line of residue left behind after wiping.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086842949952,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-orchard-branch-spray-pressure-retaining-valve-1.png?v=1794387280","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-orchard-branch-spray-pressure-retaining-valve","provider":"Ares Acres","version":"1.0","type":"link"}