{"product_id":"dji-agras-t30-oem-remote-controller-main-board","title":"DJI Agras T30 OEM Remote Controller Main Board","description":"\u003cp\u003eThe DJI Agras T30 OEM Remote Controller Main Board is the main circuit board inside the remote controller of the DJI Agras T30 and T10, the board the controller's other modules plug into. As shown in the product images, it is a black, U-shaped circuit board: a wide upper section carrying a large flat metal shield and a row of square metal RF shield cans along its top edge, a further shield can on the left, a long metal shield along the right-hand arm, and a narrow lower arm ending in a flex connector, with gold screw pads around its edges. It belongs to the remote controller, it is identified for the DJI Agras T30 and T10, and it is supplied brand new as one bare board. Operators usually reach it while searching for a T30 remote controller main board, a T10 RC motherboard, a T30 controller logic board, or the reason a controller stays dead or faulty after the battery, screen and other modules have been checked. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10 remote controller, main board position inside the controller housing\u003c\/li\u003e\n\u003cli\u003eMatched by the U-shaped board outline, the layout of the metal shield cans, the flex connector and the screw pads against the board you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM remote controller component, brand new, supplied as one bare board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one bare main board. It is not a complete remote controller, not the Remote Controller Button Board, not the RF Module and not a battery. Choose the variant for the aircraft the controller flies; the board is the same item under both. If you want the match confirmed, photograph the board in place with the controller opened, so the shield cans and the flex connector show, and send it to us. We will match it for you, so the right part arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Remote Controller Main Board, black U-shaped circuit board with metal RF shield cans and a flex connector, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne board per order line.\u003c\/strong\u003e The variant is a single bare board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the board:\u003c\/strong\u003e the U-shaped circuit board, the metal shield cans fitted to it and the flex connector on its lower arm, as one assembly.\u003c\/p\u003e\n\u003cp\u003eNot included: the controller housing, screen, control sticks, button board, RF module, antennas, cooling fan, internal battery, flex and ribbon cables that run between modules, screws, thermal pads and tools. Each of these is a separate item.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the board inside the controller. If a cable, thermal pad or screw is missing or damaged, tell us where it sat and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe T30 and T10 remote controller is built from modules: a screen, two stick modules, a button board, an RF module with its antennas, a cooling fan and an internal battery. They all meet at the main board. It is the board that the rest of the controller is wired to, and the one that runs the controller's processing.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, the board has five features that identify it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe U-shaped outline\u003c\/strong\u003e — a wide upper section with two arms running down, one long arm on the right and a short lower arm, leaving an open space in the middle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe row of shield cans along the top\u003c\/strong\u003e — three square metal RF shield cans across the upper edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe large flat shield\u003c\/strong\u003e — a wide metal shield covering most of the upper section, with two round bosses on it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe long right-hand shield\u003c\/strong\u003e — a long metal shield running down the right arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe flex connector\u003c\/strong\u003e — a connector on the narrow lower arm, between two gold screw pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe shield cans are the board's most visible feature and the main reason it is easy to recognise. They cover the radio and processing circuits and keep their interference off each other. They are fitted to the board and are not separate parts.\u003c\/p\u003e\n\u003cp\u003eA main board fails in a smaller number of ways than its symptoms suggest. Water or chemical residue gets into the controller and corrodes the board. A drop cracks the board or tears a connector from its pads. A short elsewhere in the controller, often from a damaged cable or battery, damages a circuit on the board. In each case the result looks like a controller fault, and so do a dozen other failures that are not the board at all.\u003c\/p\u003e\n\u003cp\u003eThe board has no adjustment. Its firmware is installed and updated through DJI's own tools, and after a board change the controller is expected to be linked to the aircraft again.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe board's engineering role is processing and interconnection. It runs the controller and joins its modules together.\u003c\/p\u003e\n\u003cp\u003eIn the controller it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnects the screen, stick modules, button board, RF module, fan and battery\u003c\/li\u003e\n\u003cli\u003eReads the sticks and buttons and passes the commands on for transmission\u003c\/li\u003e\n\u003cli\u003eCarries the processing circuits under its shield cans\u003c\/li\u003e\n\u003cli\u003eConnects through its flex connector on the lower arm\u003c\/li\u003e\n\u003cli\u003eCan be replaced on its own once the housing is opened and its connections and screws are released\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not store energy; the internal battery does that\u003c\/li\u003e\n\u003cli\u003eIt is not the display; the screen is a separate module\u003c\/li\u003e\n\u003cli\u003eIt is not the stick gimbals or the buttons; those are separate modules\u003c\/li\u003e\n\u003cli\u003eIt is not the RF Module; the radio link module and its antennas are separate parts\u003c\/li\u003e\n\u003cli\u003eIt does not cool itself; the Remote Controller Cooling Fan does that\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause every module connects to it, the main board sees every fault in the controller. A dead battery, a broken flex cable, a failed screen, a stuck button or a dead RF module can each make the controller look dead or faulty, and each one is a far smaller repair than the board.\u003c\/p\u003e\n\u003cp\u003eProcessor, memory, radio specifications, dimensions and weight are not published for this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the board is the last suspect, reached only after power, screen, sticks, buttons, fan and radio are ruled out\u003c\/h2\u003e\n\u003cp\u003eWhen a remote controller fails, the main board is the part people think of first and the one that should be tested last. It is connected to everything, so it appears to be involved in everything. Most controller faults are not on the board.\u003c\/p\u003e\n\u003cp\u003eWork outward-in. Rule out each module that can produce the symptom, starting with the cheapest and easiest to check, and reach the board only when nothing else explains the fault.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms that can point at the main board:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA controller that will not power on with a known-good, charged internal battery and sound power connections\u003c\/li\u003e\n\u003cli\u003eA controller that powers on but freezes, restarts or will not boot, with the screen and its cable proved good\u003c\/li\u003e\n\u003cli\u003eSeveral unrelated functions failing at once, after a drop or water exposure\u003c\/li\u003e\n\u003cli\u003eVisible corrosion, burn marks or a cracked area on the board when the controller is opened\u003c\/li\u003e\n\u003cli\u003eA connector torn from its pads on the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat proves it:\u003c\/strong\u003e with the controller powered off and its battery disconnected, open the housing and look at the board under good light for corrosion, burn marks, cracks and lifted connectors. Then test each module that can cause the symptom: a known-good battery, the screen cable reseated, the sticks and button board checked, the RF module and antennas checked. A fault that remains with all of them ruled out, or visible damage on the board itself, is the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck these first, because they produce similar symptoms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe internal battery and its lead, for a dead or failing battery\u003c\/li\u003e\n\u003cli\u003eThe screen and its cable, for a controller that runs but shows nothing\u003c\/li\u003e\n\u003cli\u003eThe stick modules, for a stick that reads wrongly or not at all\u003c\/li\u003e\n\u003cli\u003eThe Remote Controller Button Board, for buttons that do not respond\u003c\/li\u003e\n\u003cli\u003eThe RF Module and antennas, for a controller that runs but will not link or keeps losing the aircraft\u003c\/li\u003e\n\u003cli\u003eThe Remote Controller Cooling Fan, for a controller that shuts down when warm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not explain:\u003c\/strong\u003e a single stick that reads wrongly, a single button that does not respond, a cracked screen, weak range with damaged antennas, or a controller that only fails when it is hot and its fan is not running. Those sit in the stick module, the button board, the screen, the RF module or the fan.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the board when inspection and testing confirm one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrosion or residue damage on the board after water or chemical exposure\u003c\/li\u003e\n\u003cli\u003eA cracked board or a connector torn from its pads\u003c\/li\u003e\n\u003cli\u003eBurn marks or a damaged component on the board\u003c\/li\u003e\n\u003cli\u003eA controller that will not power on or boot with every connected module proved good\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe internal battery and its lead\u003c\/li\u003e\n\u003cli\u003eThe screen and its cable\u003c\/li\u003e\n\u003cli\u003eThe stick modules and the button board\u003c\/li\u003e\n\u003cli\u003eThe RF Module, antennas and cooling fan\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA board with corrosion on it can still run, for a while. Corrosion keeps working after the controller is dried out, and intermittent faults that come and go are often its first sign. A corroded board is not proved sound because the controller still powers on today.\u003c\/p\u003e\n\u003cp\u003eThere is no published service interval for the board. It is replaced when it is damaged or proved faulty, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Remote controller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Controller main board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e U-shaped circuit board with a row of three square shield cans along the top, a large flat shield, a further shield can on the left, a long shield on the right arm and a flex connector on the lower arm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black board with metal shield cans and gold screw pads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProcessor and memory:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadio specifications:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e Flex connector on the lower arm; further module connections as on the board you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Inside the T30 and T10 remote controller housing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Screwed into the controller housing through its gold screw pads; modules connected by their cables\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws, cables and thermal pads are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware:\u003c\/strong\u003e Installed and updated through DJI's own tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the board is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM remote controller component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the controller off and disconnect its internal battery as soon as the housing allows\u003c\/li\u003e\n\u003cli\u003eWork on an anti-static mat and wear an earthed wrist strap; the board is sensitive to static\u003c\/li\u003e\n\u003cli\u003ePhotograph every connector and cable on the old board, and the routing of each cable, before anything is undone\u003c\/li\u003e\n\u003cli\u003eNote the position of every screw and any thermal pad on or under the shield cans\u003c\/li\u003e\n\u003cli\u003eLay the new board beside the old one and compare the outline, the shield cans and the flex connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease the flex and ribbon cables by their latches, never by pulling the cable\u003c\/li\u003e\n\u003cli\u003eRemove the board screws and lift the old board out without bending it\u003c\/li\u003e\n\u003cli\u003eTransfer or renew any thermal pads so they sit where they sat on the old board\u003c\/li\u003e\n\u003cli\u003eSeat the new board on its screw posts without forcing it, and fit the screws evenly\u003c\/li\u003e\n\u003cli\u003eReconnect each cable as the photographs show, with every latch fully closed\u003c\/li\u003e\n\u003cli\u003eReconnect the internal battery last\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClose the housing without pinching any cable\u003c\/li\u003e\n\u003cli\u003ePower the controller on and confirm the screen, sticks and buttons respond\u003c\/li\u003e\n\u003cli\u003eUpdate the controller firmware through DJI's own tools if prompted\u003c\/li\u003e\n\u003cli\u003eLink the controller to the aircraft following DJI's own procedure in the app\u003c\/li\u003e\n\u003cli\u003eConfirm a stable link and correct stick response before any flight, then record the replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Keep the controller dry, and keep it out of spray drift and chemical residue; most board failures start as residue that finds its way inside. Wipe the controller after each day with a damp cloth, never a running tap. Keep the cooling fan's intake and outlet clear, and store the controller charged and out of the sun.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis board is for operators and technicians whose T30 or T10 remote controller has been proved to have a main board fault:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 and T10 operators with a controller damaged by water or chemical residue\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators whose controller failed after a drop, with its other modules proved good\u003c\/li\u003e\n\u003cli\u003eAgras service centres repairing T30 and T10 controllers at board level\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping a controller in service rather than retiring it for one failed board\u003c\/li\u003e\n\u003cli\u003eRepair technicians with the anti-static equipment and care that board work needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe controller is dead but its internal battery has not been tested — test the battery first\u003c\/li\u003e\n\u003cli\u003eOnly the screen is blank or cracked — that is the screen or its cable\u003c\/li\u003e\n\u003cli\u003eOne stick or one button does not respond — that is the stick module or the Remote Controller Button Board\u003c\/li\u003e\n\u003cli\u003eThe controller runs but will not link or keeps losing the aircraft — check the RF Module and antennas\u003c\/li\u003e\n\u003cli\u003eYou want a complete working controller — that is the DJI Agras T30 OEM Remote Controller, a whole unit\u003c\/li\u003e\n\u003cli\u003eYou fly a T16, T20, T40 or T50 — this board is identified only for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe main board is the most expensive part inside the controller and the one most often blamed. It is connected to everything, so every fault seems to pass through it. Most do not start there.\u003c\/p\u003e\n\u003cp\u003eThe right order is outward-in: battery, screen and cable, sticks, buttons, radio and fan, each one checked or swapped, and the board reached only when they are all ruled out. On many controllers that search ends at a battery or a cable, and the board never needs to be touched.\u003c\/p\u003e\n\u003cp\u003eThat is the case for testing first, while that information is still cheap. Each of those checks takes minutes and costs little. A board replaced when the fault was elsewhere leaves the fault in place and the controller still down.\u003c\/p\u003e\n\u003cp\u003eWhen the search does end at the board, through corrosion, a crack, a torn connector or a fault that survives every other test, this is the part, and replacing it returns the rest of the controller to service. The honest reason to buy it is that everything else has already been ruled out.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30; DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Remote controller main board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Remote controller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Inside the T30 and T10 remote controller housing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Runs the controller and connects its screen, sticks, buttons, radio, fan and battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black U-shaped circuit board with metal RF shield cans and a flex connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 bare board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Housing, screen, sticks, button board, RF module, antennas, fan, battery, cables, screws, thermal pads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Rule out battery, screen, sticks, buttons, RF module and fan first; the board is the last suspect\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Water or residue corrosion, drop damage, torn connector, damage from a short elsewhere\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAfter replacement:\u003c\/strong\u003e Firmware update through DJI's tools if prompted; link the controller to the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM remote controller component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 remote controller main board; T10 RC motherboard; T30 controller logic board; Agras T30 RC mainboard; DJI T10 remote controller board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the complete T30 Remote Controller, not the Remote Controller Button Board, not the RF Module, not the internal battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI T30 remote controller main board\u003c\/p\u003e\n\u003cp\u003eT30 RC main board\u003c\/p\u003e\n\u003cp\u003eT30 RC motherboard\u003c\/p\u003e\n\u003cp\u003eT10 remote controller main board\u003c\/p\u003e\n\u003cp\u003eAgras T10 RC motherboard\u003c\/p\u003e\n\u003cp\u003eT30 controller logic board\u003c\/p\u003e\n\u003cp\u003eT30 remote controller will not power on\u003c\/p\u003e\n\u003cp\u003eT30 remote controller water damage\u003c\/p\u003e\n\u003cp\u003eAgras T30 remote controller repair parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 remote controller parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003eAgras T30 Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003eAgras T30 remote controller main board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003eAgras T10 Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Remote Controller Main Board\u003c\/p\u003e\n\u003cp\u003eAgras T10 remote controller main board replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras remote controller parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras RC repair parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone remote controller board\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Remote Controller Main Board Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 remote controller main board?\u003c\/strong\u003e The main circuit board inside the T30 and T10 remote controller. Every other module in the controller connects to it, and it runs the controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy controller will not turn on. Do I need the main board?\u003c\/strong\u003e Probably not first. Test the internal battery and its lead, and check the power connections. The board is the last suspect, reached after those are ruled out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T10 controller as well as the T30?\u003c\/strong\u003e Yes. It is identified for the DJI Agras T30 and T10 remote controller. Choose the variant for the aircraft you fly; the board is the same item.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a complete remote controller?\u003c\/strong\u003e No. It is the bare main board. The complete unit is the DJI Agras T30 OEM Remote Controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the button board?\u003c\/strong\u003e No. The Remote Controller Button Board carries the buttons. The main board runs the controller and connects the button board to everything else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the RF module?\u003c\/strong\u003e No. The RF Module and its antennas handle the radio link and are separate parts. The main board connects to them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy controller got wet. Is the board ruined?\u003c\/strong\u003e Not always, but corrosion keeps working after the controller is dried. Open it, look for residue and corrosion on the board, and replace the board if it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with screws or thermal pads?\u003c\/strong\u003e No. It is the board alone. Reuse the screws, and renew any thermal pads that are torn or dried out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill I need to link the controller again?\u003c\/strong\u003e Expect to. After a board change, link the controller to the aircraft following DJI's own procedure in the app, and update firmware if prompted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Only with anti-static precautions and care with fine connectors. Photograph every cable first, disconnect the battery, release latches rather than pulling cables, and reconnect exactly as before.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe controller restarts by itself. Is that the board?\u003c\/strong\u003e It can be, but check the internal battery and the cooling fan first. A failing battery or an overheating controller can both cause restarts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne stick does not work. Is that the board?\u003c\/strong\u003e Unlikely. A single stick fault is usually the stick module or its cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the metal boxes on the board?\u003c\/strong\u003e RF shield cans. They cover the radio and processing circuits and are part of the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually damages it?\u003c\/strong\u003e Water and chemical residue getting inside, drops that crack the board or tear connectors, and shorts elsewhere in the controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is damaged or proved faulty after the other modules are ruled out.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086843408704,"sku":null,"price":974.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68086843441472,"sku":null,"price":974.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-remote-controller-main-board-1.png?v=1794387283","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-remote-controller-main-board","provider":"Ares Acres","version":"1.0","type":"link"}