{"product_id":"dji-agras-t30-oem-spray-nozzle-holder-8-pcs","title":"DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs)","description":"\u003cp\u003eThe DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs) is a pack of eight black moulded nozzle holders from the spray system of the DJI Agras T30 and T10. Each holder is a small, open, rounded-rectangular frame: one long side is thicker and carries a raised, curved shoulder, the opposite side carries a small step at its centre, and the edge of the frame shows a layered, stepped profile. As its name says, it is the holder that seats a spray nozzle at its position on the aircraft; it is not a nozzle, not a nozzle tip, not a seal and not a connector nut. It is identified for the DJI Agras T30 and T10. Operators usually reach it while searching for a T30 nozzle holder, a T10 nozzle retainer, a cracked T30 nozzle frame, a spare set of T30 nozzle holders for the field kit, or the reason one T30 nozzle sits loose or crooked on the spray bar. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10, spray nozzle holder position on the spray system\u003c\/li\u003e\n\u003cli\u003eMatched by frame outline, raised shoulder, centre step and stepped edge profile against the holder you removed\u003c\/li\u003e\n\u003cli\u003eSpray system component, new, supplied as a pack of eight holders in the model you select\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach variant is the same pack of eight holders, ordered under the aircraft you fly. If you want the match confirmed, photograph one of the holders you removed face on and from the side, next to a ruler, and send it to us — we will match it for you.\u003c\/p\u003e\n\u003cp\u003eThe name matters less than the shape here. Other Agras aircraft also have a part called a nozzle holder, and on some of them it is a completely different moulding. Lay your old holder beside the product images: a small rounded frame with a raised shoulder is this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8 × Spray Nozzle Holder — black moulded rounded-rectangular frames, each with a raised curved shoulder on one long side and a small step at the centre of the opposite side, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a pack of holders, not nozzles.\u003c\/strong\u003e No nozzles, nozzle tips, filters, seals or connector nuts are included.\u003c\/p\u003e\n\u003cp\u003eNot included: nozzles and nozzle tips, nozzle filters, sealing rings and O-rings, connector nuts, check valves, hoses and hose clamps, the spray bar or lance the nozzles mount to, and any screws or fasteners. Move sound parts across from the old assembly, or replace damaged ones separately.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the holder on the aircraft. If a seal, nut or clip broke when the old holder came off, tell us which one and we will help you identify it.\u003c\/p\u003e\n\u003cp\u003eWhy eight: a nozzle holder is a small part that is easy to crack, easy to drop in a field and easy to lose during a cleaning session. Eight gives you a full change across the positions you service at one time and spares for the field kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe spray nozzle holder is the small frame that seats a nozzle at its position on the T30 or T10 spray system. The nozzle does the spraying. The holder is what keeps the nozzle located, square and in the place the spray system expects it to be.\u003c\/p\u003e\n\u003cp\u003eIts shape, as shown in the product images, has four working features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe frame\u003c\/strong\u003e — an open, rounded-rectangular ring with a clear centre, so the part it locates passes through or sits within it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe shoulder\u003c\/strong\u003e — a thicker, raised and curved section along one long side, the most solid part of the moulding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe centre step\u003c\/strong\u003e — a small step or notch at the middle of the long side opposite the shoulder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe stepped edge\u003c\/strong\u003e — the frame is layered, so its edge shows a stepped profile rather than a single flat face\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThose features are what make the holder a match. A frame with the right outline but no shoulder, or with the step in a different place, will not seat the same way, even if it looks close in a photograph.\u003c\/p\u003e\n\u003cp\u003eOver a working season a nozzle holder sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray mix and chemical residue at the nozzle it seats\u003c\/li\u003e\n\u003cli\u003eRinse water at the end of every day\u003c\/li\u003e\n\u003cli\u003eVibration from the airframe and pressure pulses from the spray system\u003c\/li\u003e\n\u003cli\u003eKnocks from crop, stubble and the ground at the low points of the aircraft\u003c\/li\u003e\n\u003cli\u003eHandling every time a nozzle is removed for cleaning or a tip is changed\u003c\/li\u003e\n\u003cli\u003eSun and heat on the trailer between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHolders are replaced for three reasons: the frame cracks, usually at a corner or beside the centre step; the shoulder chips or breaks; or the holder is lost when a nozzle is taken off in the field. The first of those is the one that is easy to miss, because a cracked frame can still look whole until it is flexed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe spray nozzle holder's engineering role is location. It seats the nozzle at its position and keeps it there, square to the spray system, against vibration and spray pressure.\u003c\/p\u003e\n\u003cp\u003eAt its position on the spray system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats the nozzle at its position\u003c\/li\u003e\n\u003cli\u003eKeeps the nozzle square, so it sprays in the direction the spray system expects\u003c\/li\u003e\n\u003cli\u003eStops the nozzle turning or shifting under vibration\u003c\/li\u003e\n\u003cli\u003eHolds that location against pressure pulses from the pump\u003c\/li\u003e\n\u003cli\u003eLets the nozzle be removed and refitted for cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not set the flow rate; the pump and the nozzle tips do that\u003c\/li\u003e\n\u003cli\u003eIt does not atomise or shape the spray; the nozzle does that\u003c\/li\u003e\n\u003cli\u003eIt does not filter the liquid; the nozzle filter and tank filter do that\u003c\/li\u003e\n\u003cli\u003eIt does not seal the joint; the sealing ring does that\u003c\/li\u003e\n\u003cli\u003eIt does not clamp the nozzle body to its fitting; the connector nut does that\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the holder is a single moulding, it is either whole and at its shape or it is not. There is nothing on it to adjust and no app setting that compensates for a cracked one.\u003c\/p\u003e\n\u003cp\u003eThat is the honest case for this part. A holder that is cracked, chipped or missing lets the nozzle sit loose or crooked. A holder that is whole, with a nozzle that weeps, drips or sprays weakly, points to a seal, nut, valve or tip problem, and a new holder will not change it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a nozzle that sits loose or crooked is a holder; a nozzle that leaks or sprays badly is something else\u003c\/h2\u003e\n\u003cp\u003eWhen one T30 or T10 nozzle starts misbehaving, the holder is often the last thing anyone looks at, because it is small and sits behind the nozzle. That is fair for most spray faults, which start at the tip, the filter, the seal or the valve. But a nozzle that no longer sits where it should is a different fault, and it usually starts at the holder.\u003c\/p\u003e\n\u003cp\u003eSo the diagnosis turns on one question: is the nozzle in the right place and misbehaving, or is it out of place?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the holder is the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA nozzle that moves, turns or rocks when you touch it, when its neighbours are firm\u003c\/li\u003e\n\u003cli\u003eA nozzle that sits visibly crooked compared with the nozzles beside it\u003c\/li\u003e\n\u003cli\u003eA crack in the holder frame, often at a corner or beside the centre step\u003c\/li\u003e\n\u003cli\u003eA chipped or broken shoulder\u003c\/li\u003e\n\u003cli\u003eA holder that is missing after a nozzle was removed in the field\u003c\/li\u003e\n\u003cli\u003eA spray stripe from one position that started after a knock or a cleaning session\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the holder is not the problem:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeak or uneven spray from a nozzle that sits square and firm\u003c\/strong\u003e — clean or replace the nozzle tip and its filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeeping at the joint between the nozzle and its fitting\u003c\/strong\u003e — a sealing ring or connector nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDripping after shut-off\u003c\/strong\u003e — a check valve or solenoid valve symptom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe same fault at every position\u003c\/strong\u003e — the pump, the flow meter, the hoses or the mix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA quick check:\u003c\/strong\u003e with the aircraft powered down and the battery out, take hold of each nozzle in turn and try to rock it gently. A firm nozzle with a healthy holder does not move. Then look along the row: every nozzle should point the same way. A nozzle that rocks, or one that points off line from its neighbours, is the position to look at.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThen look at the holder itself.\u003c\/strong\u003e Remove the nozzle, take the holder out and flex it very gently between finger and thumb. A crack that was invisible at rest often opens when the frame is flexed. Check the shoulder and the centre step for chips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwap test for a spray fault:\u003c\/strong\u003e move the suspect nozzle to a healthy position. If the fault follows the nozzle, the nozzle is the cause. If it stays at the position, look at the holder, the seal and the hose there.\u003c\/p\u003e\n\u003cp\u003eDo not glue or tape a cracked holder. A repaired frame can look right and still let the nozzle shift as soon as the aircraft vibrates.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the spray nozzle holder when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack in the frame, at a corner, along a side or beside the centre step\u003c\/li\u003e\n\u003cli\u003eA chipped or broken shoulder\u003c\/li\u003e\n\u003cli\u003eA frame that is distorted, so it no longer lies flat\u003c\/li\u003e\n\u003cli\u003eA holder that lets its nozzle rock or turn while the neighbouring nozzles are firm\u003c\/li\u003e\n\u003cli\u003eA holder that has been glued, taped or heated\u003c\/li\u003e\n\u003cli\u003eA holder that is missing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they cause spray faults that are blamed on the holder:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe nozzle tip — wear, blockage or damage\u003c\/li\u003e\n\u003cli\u003eThe nozzle filter\u003c\/li\u003e\n\u003cli\u003eThe sealing ring and connector nut at the nozzle\u003c\/li\u003e\n\u003cli\u003eThe check valve and the solenoid valve on that line\u003c\/li\u003e\n\u003cli\u003eThe hose and clamp feeding that position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the nozzle holder. It is replaced when it is cracked, chipped, distorted or missing, not on a schedule. With eight in the pack, the sensible habit is to replace any holder that looks doubtful at the same time as the one that has failed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying — nozzle location\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Moulded nozzle holder frame\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 8 holders\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Open rounded-rectangular frame; raised curved shoulder on one long side; small step at the centre of the opposite side; stepped edge profile\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e On the spray system at a nozzle position, seating the nozzle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fitted in place of the old holder with the nozzle refitted through it; no published tightening value\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the holder is whole and at its shape or it is not\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30 and DJI T10; the same pack of eight under each aircraft name\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Spray system component, new\u003c\/p\u003e\n\u003cp\u003eEvery value marked not published is left that way on purpose. Match the holder by its outline, shoulder and centre step, laid beside the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the tank, flush the spray system with clean water and let it drain\u003c\/li\u003e\n\u003cli\u003eWear gloves and eye protection; residue collects at the nozzles\u003c\/li\u003e\n\u003cli\u003ePhotograph the nozzle and its holder in place from the front and the side, so the orientation of the shoulder is on record\u003c\/li\u003e\n\u003cli\u003eLay a new holder beside the old one and compare the outline, the shoulder and the centre step\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the nozzle from its position, keeping its tip, filter, sealing ring and nut together\u003c\/li\u003e\n\u003cli\u003eTake the old holder out without levering against the spray bar or lance\u003c\/li\u003e\n\u003cli\u003eFit the new holder the same way round as the old one, with the shoulder on the same side, as shown in your photograph\u003c\/li\u003e\n\u003cli\u003eRefit the nozzle through the holder and seat it fully; do not force a nozzle that will not seat\u003c\/li\u003e\n\u003cli\u003eRefit the sealing ring and nut, and reconnect any hose without straining it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRock each nozzle gently by hand; every one should be firm\u003c\/li\u003e\n\u003cli\u003eLook along the row and check that every nozzle points the same way\u003c\/li\u003e\n\u003cli\u003eFill the tank with clean water and run the pump on the ground\u003c\/li\u003e\n\u003cli\u003eWatch the spray from the repaired position and compare it with its neighbours\u003c\/li\u003e\n\u003cli\u003eCheck for weeping and drips at each nozzle under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the nozzles and holders with the rest of the spray system at the end of each day. On the pre-flight walk-around, touch each nozzle; a loose one is felt before it is seen. When nozzles come off for cleaning in the field, keep each holder with its nozzle so none goes missing in the stubble. Keep the spare holders from the pack in the field kit, in a closed bag, away from sun and spray mix.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThese holders are for operators and technicians keeping T30 and T10 nozzles seated and square:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators replacing a holder that cracked or went missing\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators chasing a nozzle that rocks or sits crooked at one position\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators who strip and clean nozzles daily and lose small parts in the field\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding spray systems after a hard landing or a season of work\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking spare holders across several T30 and T10 aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe nozzle sits square and firm but sprays weakly or unevenly — clean or replace the nozzle tip and filter\u003c\/li\u003e\n\u003cli\u003eThe nozzle weeps at its joint — check the sealing ring and connector nut first\u003c\/li\u003e\n\u003cli\u003eThe aircraft drips after shut-off — that is a check valve or solenoid valve\u003c\/li\u003e\n\u003cli\u003eThe spray bar or lance itself is cracked or bent — replace that part\u003c\/li\u003e\n\u003cli\u003eYou fly a T16 — the T16 nozzle holder is a Y-shaped moulding listed separately as the DJI Agras T16 OEM Spray Nozzle Holder\u003c\/li\u003e\n\u003cli\u003eYou fly a T20, T20P, T25, T40, T50 or later Agras aircraft — these holders are identified only for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe spray nozzle holder matters because a nozzle is only as good as its seat. A perfect tip that rocks in a cracked holder sprays a perfect pattern in a moving direction.\u003c\/p\u003e\n\u003cp\u003eThe trap with this part is its name. Several Agras aircraft have a part called a nozzle holder, and they are not the same moulding. On the T16 it is a Y-shaped holder with two arms. On the T30 and T10 it is this small rounded frame with a raised shoulder. Ordering by the words nozzle holder alone can put the wrong part in your hand.\u003c\/p\u003e\n\u003cp\u003eSo the match is made by shape. Lay the holder you removed beside the product images and check three things: the rounded-rectangular outline, the raised shoulder along one long side, and the small step at the centre of the opposite side. If all three agree, this is the part. If your old holder has arms, clamp ends or a stem, it is a different holder.\u003c\/p\u003e\n\u003cp\u003eEqually, the holder is the wrong part to buy for a worn tip, a blocked filter, a weeping seal or a dripping valve. A new holder under a worn tip still sprays unevenly. The rock test on each nozzle separates a seating fault from a spray fault in seconds.\u003c\/p\u003e\n\u003cp\u003eDo not glue a cracked holder and fly on. A repaired frame that looks whole can still let the nozzle move under vibration, and it usually does so in the middle of a job, far from the trailer.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30; DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Spray nozzle holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spraying\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e On the spray system at a nozzle position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Seats the nozzle and keeps it located and square\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black open rounded-rectangular frame with a raised curved shoulder on one long side and a small centre step on the other\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 8 holders\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e DJI T30; DJI T10 — same pack of eight\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Nozzles, tips, filters, sealing rings, connector nuts, check valves, hoses, spray bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical function:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Rock each nozzle by hand; one that moves while its neighbours are firm points to its holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked frame, chipped shoulder, distorted frame, holder lost in the field\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical misdiagnosis:\u003c\/strong\u003e A weeping seal or worn tip blamed on the holder, or a loose nozzle blamed on the tip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Spray system component, new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 nozzle holder; T10 nozzle holder; T30 nozzle retainer; T30 nozzle frame; Agras T30 nozzle seat; DJI T10 sprinkler holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T16 Y-shaped nozzle holder, not a nozzle, not a sealing ring or connector nut, not a nozzle clip, not a spray bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 spray nozzle holder 8 pcs\u003c\/p\u003e\n\u003cp\u003eDJI T30 nozzle holder\u003c\/p\u003e\n\u003cp\u003eDJI T10 nozzle holder\u003c\/p\u003e\n\u003cp\u003eT30 nozzle retainer\u003c\/p\u003e\n\u003cp\u003eT30 nozzle holder pack\u003c\/p\u003e\n\u003cp\u003eAgras T10 spray nozzle holder\u003c\/p\u003e\n\u003cp\u003eT30 nozzle frame\u003c\/p\u003e\n\u003cp\u003eT30 nozzle seat\u003c\/p\u003e\n\u003cp\u003eDJI T30 sprinkler holder\u003c\/p\u003e\n\u003cp\u003eT30 loose nozzle fix\u003c\/p\u003e\n\u003cp\u003eT10 nozzle crooked\u003c\/p\u003e\n\u003cp\u003eT30 cracked nozzle holder\u003c\/p\u003e\n\u003cp\u003eAgras T30 T10 nozzle parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003eAgras T30 Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003eAgras T30 spray nozzle holder replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Spray Nozzle Holder\u003c\/p\u003e\n\u003cp\u003eAgras T10 spray nozzle holder replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras nozzle parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Spray Nozzle Holder Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 spray nozzle holder?\u003c\/strong\u003e A small black moulded frame that seats a spray nozzle at its position on the T30 or T10 spray system and keeps it located and square. This pack holds eight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10. Choose the variant for the aircraft you fly; both are the same pack of eight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T16 nozzle holder?\u003c\/strong\u003e No. The T16 holder is a Y-shaped moulding with two arms and clamp ends, listed separately as the DJI Agras T16 OEM Spray Nozzle Holder. These are small rounded frames for the T30 and T10.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T20, T40 or T50?\u003c\/strong\u003e It is identified only for the T30 and T10. Do not fit it to another Agras aircraft on the strength of a similar shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many holders are in the pack?\u003c\/strong\u003e Eight. Use what you need and keep the rest in the field kit as spares.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre nozzles included?\u003c\/strong\u003e No. The holders come on their own. Move the nozzle, tip, filter, sealing ring and nut across from the old position, or replace damaged ones separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know my old part is this holder?\u003c\/strong\u003e Lay it beside the product images. A rounded-rectangular frame with a raised shoulder along one long side and a small step at the centre of the other side is this part. If your part has arms or a stem, it is a different holder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne nozzle rocks when I touch it. Is it the holder?\u003c\/strong\u003e Very likely, if its neighbours are firm. Remove the nozzle, take the holder out and flex it gently. A crack that is invisible at rest often opens when the frame is flexed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne nozzle weeps at the joint. Will a new holder fix it?\u003c\/strong\u003e Usually not. Weeping at the joint is a sealing ring or connector nut. Check those first, and replace the holder only if it is cracked or chipped.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a cracked holder?\u003c\/strong\u003e Not as a repair. A glued frame can look whole and still let the nozzle shift under vibration. Replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old holder face on and from the side and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way round does it go?\u003c\/strong\u003e The same way as the one you removed. Photograph the holder in place before you take it out, and fit the new one with the shoulder on the same side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there anything to adjust?\u003c\/strong\u003e No. The holder is a single moulding. It is whole and at its shape or it is not, and there is no app setting that compensates for a cracked one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fly with a holder missing?\u003c\/strong\u003e It is not a good idea. Without its holder a nozzle can shift, turn or work loose under vibration and spray pressure. Fit a holder from the pack first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Flush and drain the spray system, remove the nozzle, swap the holder the same way round, refit the nozzle, then rock it by hand and run clean water through it on the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace a holder when it is cracked, chipped, distorted or missing. Touch each nozzle on the pre-flight walk-around; a loose one is felt before it is seen.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68087141990720,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68087142023488,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-spray-nozzle-holder-8-pcs-1.png?v=1794388616","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-spray-nozzle-holder-8-pcs","provider":"Ares Acres","version":"1.0","type":"link"}