{"product_id":"dji-agras-t30-oem-sprayer-main-body","title":"DJI Agras T30 OEM Sprayer Main Body","description":"\u003cp\u003eThe DJI Agras T30 OEM Sprayer Main Body is the round, black main body of the sprinkler assembly, named in its part designation as the sprayer main body. It is a single moulded body with a wide conical base, an open circular housing rising from it, a fixed three-vane spider across the inside of the housing carrying a metal bushing at its centre, a flat fin projecting from one side of the cone, a small post with a clip at the rim, and screw points around the lower edge of the base. It is the structural part that the rest of the assembly is located on: its centre holds the axis, its housing surrounds what sits inside it, and its base and fixing points hold it in place on the aircraft. It belongs to the spray system, and it is identified for the DJI Agras T30 and T10. Operators usually reach it while searching for a T30 sprayer body, a T10 sprinkler body, a cracked T30 sprayer housing, or a T30 sprayer main body replacement after a hard landing. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10 spray system\u003c\/li\u003e\n\u003cli\u003eMatched by conical base, circular housing, three-vane centre, side fin and mounting post against the body you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spray system component, brand new, one sprayer main body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRound black bodies from different Agras systems look alike in a parts drawer. If you want the match confirmed, photograph the body you removed from above, showing the three vanes, and from the side, showing the fin, and send both photographs to us. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Sprayer Main Body — the black moulded body with its wide conical base, open circular housing, three-vane centre with metal bushing, flat side fin and rim post with clip, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the main body alone.\u003c\/strong\u003e It is the housing that the rest of the sprinkler assembly is built on, not the complete assembly.\u003c\/p\u003e\n\u003cp\u003eNot included: any motor, rotating part, nozzle, hose or cable that fits to or through the body, and any screws used to fasten it in place.\u003c\/p\u003e\n\u003cp\u003eThe metal bushing at the centre of the three vanes and the clip on the rim post are shown fitted in the product images. Nothing else is included because it appears near the body on an aircraft.\u003c\/p\u003e\n\u003cp\u003eThe name alone does not identify this part. It is not the DJI Agras T20 OEM Spreader Body, which belongs to a different aircraft, and it is not the DJI Agras T30 OEM Spreading System, which is a complete assembly. It is also not the sprayer disc body shell made for the T40 and T20P, which has a different form. Match it by shape, as set out below.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eMost of the work in a sprinkler assembly is done by the parts that move. The main body is the part that keeps them where they belong. It is the fixed frame of the assembly: the centre that holds the axis, the housing around it, the base that sits on the aircraft and the fixing points that hold it there.\u003c\/p\u003e\n\u003cp\u003eIts features, all visible in the product images:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe conical base\u003c\/strong\u003e — a wide, flared cone that forms the lower part of the body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe circular housing\u003c\/strong\u003e — an open, round housing rising from the cone, with a moulded rim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe three-vane centre\u003c\/strong\u003e — three flat vanes spanning the inside of the housing and meeting at the centre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe centre bushing\u003c\/strong\u003e — a metal bushing at the meeting point of the vanes, on the body's axis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe side fin\u003c\/strong\u003e — a flat, angled fin projecting from one side of the cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe rim post\u003c\/strong\u003e — a small upright post at the rim of the housing, fitted with a clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe fixing points\u003c\/strong\u003e — screw points around the lower edge of the base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe body is a structural part, not a decorative cover. If it cracks, warps or loses a vane, everything located on it is located wrongly, even if every other part of the assembly is perfect.\u003c\/p\u003e\n\u003cp\u003eOver a working season the sprayer main body sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChemical and fertiliser residue settling inside the housing and on the vanes\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system for every hour of flight\u003c\/li\u003e\n\u003cli\u003eKnocks from the ground, crop and transport, because it sits low on the aircraft\u003c\/li\u003e\n\u003cli\u003eShock loads through the base and fixing points after a hard landing\u003c\/li\u003e\n\u003cli\u003eWash-down water and cleaning brushes inside the housing\u003c\/li\u003e\n\u003cli\u003eRepeated removal and refitting of the parts located on it\u003c\/li\u003e\n\u003cli\u003eSunlight and heat on the black moulding through long working days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMain bodies come off for four reasons: a crack in the cone or the housing, a broken or bent vane, a worn or loose centre bushing, and broken fixing points or a broken fin or rim post.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe main body's engineering role is location. It fixes the axis at the centre of its vanes, surrounds the parts inside its housing, and holds the whole assembly in its place on the aircraft through its base and fixing points.\u003c\/p\u003e\n\u003cp\u003eIn the spray system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds the centre bushing on the assembly's axis through its three vanes\u003c\/li\u003e\n\u003cli\u003eSurrounds and shields the parts that sit inside its circular housing\u003c\/li\u003e\n\u003cli\u003eProvides the base and screw points that hold the assembly on the aircraft\u003c\/li\u003e\n\u003cli\u003eCarries the side fin and the rim post in their set positions\u003c\/li\u003e\n\u003cli\u003eKeeps every part located on it in its correct relationship to the others\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not move; it is the fixed part of the assembly\u003c\/li\u003e\n\u003cli\u003eIt does not pump or meter liquid; the pump and flow meter do\u003c\/li\u003e\n\u003cli\u003eIt does not decide the rate; the aircraft and the app settings do\u003c\/li\u003e\n\u003cli\u003eIt is not the T20 spreader body or the complete T30 spreading system\u003c\/li\u003e\n\u003cli\u003eIt is not the T40 and T20P sprayer disc body shell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause it is a fixed, unpowered part, nothing on the aircraft reports a fault in it. A cracked body does not raise an error. It is found by looking at it, and it is ordered correctly by looking at its shape.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — match the cone, the vanes and the fin, not the word on the part\u003c\/h2\u003e\n\u003cp\u003eTwo things go wrong with this part. The body itself gets damaged, which is easy to see. And the replacement gets ordered by name, which is where most mistakes happen.\u003c\/p\u003e\n\u003cp\u003eRound black housings turn up in more than one Agras system and more than one aircraft. Some are called sprayer bodies, some spreader bodies, some disc body shells, and a complete spreading system contains housings of its own. A name search returns all of them. The words are close; the parts are not interchangeable.\u003c\/p\u003e\n\u003cp\u003eThe reliable way to identify this body is its geometry, and it has four features that together set it apart: a wide conical base, an open circular housing rising from it, a fixed three-vane centre with a metal bushing, and a flat fin projecting from one side of the cone. If the body you removed has all four, it matches this part. If it lacks the three vanes or the side fin, or the housing sits on a ring rather than a cone, it is a different part, whatever it is called.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the sprayer main body has failed:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack in the conical base or the circular housing, often starting at a fixing point\u003c\/li\u003e\n\u003cli\u003eA broken, cracked or bent vane in the three-vane centre\u003c\/li\u003e\n\u003cli\u003eA centre bushing that is loose in the vanes, worn oval or no longer on the axis\u003c\/li\u003e\n\u003cli\u003eParts located on the body that no longer sit square or rub inside the housing\u003c\/li\u003e\n\u003cli\u003eA broken or cracked side fin\u003c\/li\u003e\n\u003cli\u003eA broken rim post or a missing clip\u003c\/li\u003e\n\u003cli\u003eStripped or broken screw points around the base\u003c\/li\u003e\n\u003cli\u003ePrevious repairs with adhesive or tape on the cone, the housing or the vanes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBefore condemning the body, rule out what imitates it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoose fixing screws\u003c\/strong\u003e — a body that rocks on the aircraft because its screws have backed out looks like a cracked one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe parts located on it\u003c\/strong\u003e — a damaged rotating part or fitting rubs and rattles inside a sound housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDried residue\u003c\/strong\u003e — caked residue in the housing or on the vanes stops parts seating as they should\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe aircraft-side mounting\u003c\/strong\u003e — a bent or cracked mounting on the aircraft puts a sound body out of line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse your eyes and the four features as your instruments.\u003c\/strong\u003e With the aircraft powered down and the battery out, wash the body clean and dry it. Look down into the housing and check all three vanes from root to centre. Press the centre bushing sideways with a finger and look for any movement. Run a finger and a torch round the cone and the housing, especially around every screw point, where cracks start. Then compare the body against the four features above before you match a replacement.\u003c\/p\u003e\n\u003cp\u003eDo that check first. It needs a clean body, a torch and a few minutes, and it settles both questions at once: whether the body has failed, and which body you actually have.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the sprayer main body when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack in the cone or the housing\u003c\/li\u003e\n\u003cli\u003eA broken, cracked or bent vane\u003c\/li\u003e\n\u003cli\u003eA loose or worn centre bushing\u003c\/li\u003e\n\u003cli\u003eA broken side fin or rim post\u003c\/li\u003e\n\u003cli\u003eStripped or broken screw points\u003c\/li\u003e\n\u003cli\u003eA body distorted so that parts located on it no longer sit square\u003c\/li\u003e\n\u003cli\u003ePrevious adhesive or tape repairs on the body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe body's fixing screws\u003c\/li\u003e\n\u003cli\u003eThe parts located on and inside the body\u003c\/li\u003e\n\u003cli\u003eDried residue in the housing and on the vanes\u003c\/li\u003e\n\u003cli\u003eThe aircraft-side mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the sprayer main body. It is replaced when it is cracked, broken or distorted, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30, DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spray system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Sprayer main body — the fixed housing of the sprinkler assembly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 sprayer main body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black moulded body with a wide conical base, an open circular housing, a three-vane centre with a metal bushing, a flat side fin, a rim post with clip and screw points around the base\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdentifying features:\u003c\/strong\u003e Conical base, circular housing, three fixed vanes meeting at a centre bushing, flat fin on one side of the cone\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCentre bushing:\u003c\/strong\u003e Metal bushing at the meeting point of the vanes, shown fitted in the product images\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black body; bright metal centre bushing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHousing diameter:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the body carries no electrical parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e On the aircraft as the fixed main body of the sprinkler assembly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fastens through the screw points around its base; the parts of the assembly are refitted to it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Any motor, rotating part, nozzle, hose or cable fitted to or through the body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spray system component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eDrain and flush the spray system with clean water so you are not handling chemical residue, and wear gloves\u003c\/li\u003e\n\u003cli\u003ePhotograph the old body in place from above and from the side, with the fin, the rim post and any cables or hoses in frame\u003c\/li\u003e\n\u003cli\u003eNote the orientation of the side fin relative to the aircraft, so the new body goes on the same way round\u003c\/li\u003e\n\u003cli\u003eLay the new body beside the old one and check the four features: cone, housing, three vanes and side fin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect and remove the parts fitted to or through the body, in the order shown in your photographs\u003c\/li\u003e\n\u003cli\u003eRemove the screws around the base and lift the body away\u003c\/li\u003e\n\u003cli\u003eClean the aircraft-side mounting and check it for cracks or distortion\u003c\/li\u003e\n\u003cli\u003eTransfer nothing from the old body that is cracked or worn; inspect each part you remove before refitting it\u003c\/li\u003e\n\u003cli\u003eFit the new body with its side fin in the same orientation as the old one\u003c\/li\u003e\n\u003cli\u003eRefit the screws finger-tight first, then tighten evenly around the base; no torque figure is published, so tighten snugly without cracking the screw points\u003c\/li\u003e\n\u003cli\u003eRefit the parts of the assembly to the new body, checking that each one seats square and nothing rubs inside the housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurn any part that rotates on the body by hand and check that it moves freely without rubbing\u003c\/li\u003e\n\u003cli\u003eCheck that the body sits firmly with no rocking on the aircraft\u003c\/li\u003e\n\u003cli\u003eRefit the battery and run a ground test with clean water before the first job\u003c\/li\u003e\n\u003cli\u003eCheck that every hose and connection on the assembly is secure and dry\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Flush the spray system and wash the inside of the housing and the vanes at the end of each day, so residue does not cake around the centre bushing. Check the screw points for cracks whenever the assembly is off; they are where a body starts to fail.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis main body is for operators and technicians whose sprinkler assembly needs a new fixed housing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators with a cracked or broken sprayer body after a hard landing or transport knock\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators whose centre bushing has worn loose in the vanes\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators rebuilding a sprinkler assembly around sound working parts\u003c\/li\u003e\n\u003cli\u003eAgras service centres replacing a body with broken screw points or a broken fin\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping a spare body for the busy spraying weeks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe body you removed has no three-vane centre or no side fin — it is a different housing\u003c\/li\u003e\n\u003cli\u003eYou fly a T20 and need its spreader body — the DJI Agras T20 OEM Spreader Body is that part\u003c\/li\u003e\n\u003cli\u003eThe whole spreading system on a T30 is damaged — the DJI Agras T30 OEM Spreading System is the complete assembly\u003c\/li\u003e\n\u003cli\u003eYou fly a T40 or T20P — the sprayer disc body shell made for those aircraft is a different part\u003c\/li\u003e\n\u003cli\u003eThe body is sound and only rocks because its screws are loose — tighten them and check again\u003c\/li\u003e\n\u003cli\u003eA rotating part or fitting is damaged and the body is not — replace that part instead\u003c\/li\u003e\n\u003cli\u003eYou fly a T16 or T50 — this body is identified for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eOrdering this part by name is the risk. Sprayer body, spreader body, disc body shell and spreading system are close enough in words to land the wrong part in the box, and a housing that is almost the same shape does not locate anything correctly. The four features of this body — cone, circular housing, three vanes with a centre bushing, and a side fin — identify it; the name on a parts list does not.\u003c\/p\u003e\n\u003cp\u003eThat is the whole case for this body. When the body you removed carries those four features and is cracked, has a broken vane, a loose bushing or broken screw points, this is the part, and it restores the fixed frame that every other part of the assembly depends on.\u003c\/p\u003e\n\u003cp\u003eIt is also the case against ordering it when the features do not match. A body without the three vanes or without the side fin is a different part, whatever the parts list calls it, and the right move is to photograph it and have it matched.\u003c\/p\u003e\n\u003cp\u003eWhen the features match and the body is damaged, nothing else will put the assembly back on its axis. The main body is the part everything else is located on, and it is the part that puts the sprinkler assembly back together square.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30, DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Sprayer main body — fixed housing of the sprinkler assembly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spray system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e On the aircraft as the fixed main body of the sprinkler assembly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Locates the assembly's axis at its centre bushing and holds the assembly on the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdentifying features:\u003c\/strong\u003e Wide conical base, open circular housing, three fixed vanes meeting at a metal centre bushing, flat side fin, rim post with clip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 sprayer main body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Any motor, rotating part, nozzle, hose, cable or screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Wash, then inspect vanes, centre bushing and screw points; identify by cone, housing, vanes and fin, not by name\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Cracked cone or housing, broken vane, loose or worn centre bushing, broken fin or rim post, stripped screw points\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spray system component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 sprayer body; T10 sprayer main body; T30 sprinkler body; DJI T30 sprayer housing; T10 sprinkler housing; cracked T30 sprayer body\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the T20 spreader body; not the complete T30 spreading system; not the T40\/T20P sprayer disc body shell; not identified for the T16, T20 or T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003eT30 sprayer body\u003c\/p\u003e\n\u003cp\u003eT10 sprayer main body\u003c\/p\u003e\n\u003cp\u003eT30 sprinkler body\u003c\/p\u003e\n\u003cp\u003eDJI T30 sprayer housing\u003c\/p\u003e\n\u003cp\u003eT10 sprinkler housing\u003c\/p\u003e\n\u003cp\u003ecracked T30 sprayer body\u003c\/p\u003e\n\u003cp\u003eAgras T30 sprayer main body replacement\u003c\/p\u003e\n\u003cp\u003eDJI T10 sprayer body\u003c\/p\u003e\n\u003cp\u003eT30 sprayer body three vane\u003c\/p\u003e\n\u003cp\u003eT30 sprayer centre bushing loose\u003c\/p\u003e\n\u003cp\u003eAgras T10 sprinkler main body\u003c\/p\u003e\n\u003cp\u003eAgras T30 Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003eAgras T10 Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Sprayer Main Body\u003c\/p\u003e\n\u003cp\u003eAgras T10 sprayer main body replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Sprayer Main Body Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 sprayer main body?\u003c\/strong\u003e It is the fixed, round black main body of the sprinkler assembly: a conical base, a circular housing, a three-vane centre with a metal bushing, and a flat side fin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T20, T16 or T40?\u003c\/strong\u003e It is identified only for the T30 and T10. Send us a photograph of the body you removed and we will check it against what you have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T20 spreader body?\u003c\/strong\u003e No. The DJI Agras T20 OEM Spreader Body belongs to a different aircraft. Match this body by its cone, housing, three vanes and side fin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the T30 spreading system?\u003c\/strong\u003e No. The DJI Agras T30 OEM Spreading System is a complete assembly. This is one body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the T40 sprayer disc body shell?\u003c\/strong\u003e No. That shell is made for the T40 and T20P and has a different form.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know I have the right body?\u003c\/strong\u003e Check four features on the one you removed: a wide conical base, an open circular housing, three fixed vanes meeting at a metal centre bushing, and a flat fin on one side of the cone. All four should be there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the centre bushing included?\u003c\/strong\u003e Yes. The metal bushing at the centre of the vanes is shown fitted in the product images.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Reuse sound original screws, or replace any that are corroded or damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMine has a small crack at a screw point. Does it need replacing?\u003c\/strong\u003e A crack at a screw point usually grows under vibration until the body works loose. Replace the body before the crack reaches the housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a cracked body?\u003c\/strong\u003e Adhesive does not restore the body's shape or its screw points. A cracked or distorted body is replaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph your old body from above and from the side and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are its dimensions?\u003c\/strong\u003e Exact dimensions are not published for this part. Match it by its four features, or send us a photograph.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way round does it go?\u003c\/strong\u003e With the side fin in the same orientation as on the body you removed. Photograph the old body in place first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. It fastens through the screw points around its base, and the parts of the assembly are refitted to it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is cracked, broken or distorted.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68080382935360,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68080382968128,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-sprayer-main-body-1.png?v=1794331386","url":"https:\/\/aresacres.com\/products\/dji-agras-t30-oem-sprayer-main-body","provider":"Ares Acres","version":"1.0","type":"link"}