{"product_id":"dji-agras-t40-oem-propeller-hardware-refresh-kit","title":"DJI Agras T40 OEM Propeller Hardware Refresh Kit","description":"\u003cp\u003e\u003cstrong\u003eT40 OEM Propeller Hardware Refresh Kit | DJI Agras T50\/T40 OEM Propeller Screw Kit (32 Screws) | DJI Agras T50\/T40 OEM Propeller Clip Gasket Set (16 Pcs) | DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft | Genuine DJI OEM Components | Ares Acres Curated Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit contents:\u003c\/strong\u003e 3 component lines, 3 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eA kit is a bet against downtime. The T40 OEM Propeller Hardware Refresh Kit exists because the parts inside it are the ones that strand a T50 \/ T40 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.\u003c\/p\u003e\n\u003cp\u003eThat is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T50 \/ T40 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfigured for DJI Agras T40 using compatible variants of the included products. Verify original hardware specification before installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T50\/T40 OEM Propeller Screw Kit (32 Screws)\u003c\/li\u003e\n\u003cli\u003e1 × DJI Agras T50\/T40 OEM Propeller Clip Gasket Set (16 Pcs)\u003c\/li\u003e\n\u003cli\u003e1 × DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Kit Overview\u003c\/h2\u003e\n\u003cp\u003eThe DJI Agras T40 OEM Propeller Hardware Refresh Kit combines the small retention and cushioning components used during propeller service: a 32-screw kit, 16-piece propeller clip gasket set and fixing nut\/adapter shaft hardware. It is intended as a low-cost field or workshop kit for operators who want fresh mounting hardware available whenever blades are serviced.\u003c\/p\u003e\u003cp\u003eCurated by Ares Acres from genuine DJI OEM components sold individually. Not a factory-packaged DJI kit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePropeller replacement\u003c\/li\u003e\n\u003cli\u003eSeason-start hardware refresh\u003c\/li\u003e\n\u003cli\u003eImpact inspection\u003c\/li\u003e\n\u003cli\u003eField-spare inventory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔩 Component-by-Component Breakdown\u003c\/h2\u003e\n\u003ch3\u003e1. DJI Agras T50 OEM Propeller Screw Kit (32 Screws)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Propeller Screw Kit (32 Screws)\u003c\/strong\u003e. Propulsion system fastener set \/ flight-critical mounting hardware. It installs at the propeller and propulsion system mounting points. Its job on the aircraft is straightforward: secures propeller assemblies with factory clamping force.\u003c\/p\u003e\n\u003cp\u003eOn the DJI Agras T50 OEM Propeller Screw Kit (32 Screws), construction is oEM precision-machined steel hardware; the design is precision-machined fasteners to OEM torque specification; it mounts as direct-fit OEM replacement hardware; this line supplies 32 Screws. Fitment covers DJI Agras T50, DJI Agras T40. Application: agricultural drone propulsion system maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.\u003c\/p\u003e\n\u003cp\u003eFunctionally, the DJI Agras T50 OEM Propeller Screw Kit (32 Screws) is responsible for a short and specific list of jobs: clamp each propeller securely to its mount, maintain factory torque retention in every joint, resist vibration-driven loosening across long missions, support balanced, stable rotor operation, keep load transfer even across propeller positions, protect motor assemblies from hardware movement, protect motor threads from damage by worn fasteners, refresh all eight propeller positions from one kit, replace stripped, corroded, or fatigued screws, and restore clean threads and positive hex drives. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.\u003c\/p\u003e\n\u003cp\u003eIn commercial service the DJI Agras T50 OEM Propeller Screw Kit (32 Screws) lives through high-RPM rotor loading every second of flight, continuous propulsion vibration, heavy full-tank payload cycles, repeated torque and service cycles, chemical mist and corrosion attack, fertilizer dust in the threads and drives, moisture and humidity, heat cycling in summer conditions, and frequent takeoffs and landings. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.\u003c\/p\u003e\n\u003cp\u003eLeft in service past its useful life, the DJI Agras T50 OEM Propeller Screw Kit (32 Screws) may contribute to loose propeller assemblies, rotor vibration and imbalance, reduced flight stability, accelerated motor and mount wear, damaged threads in the motor hub, stripped service hardware mid-swap, interrupted spraying missions, unexpected downtime at the field edge, and higher repair costs over time. A fresh one instead maintains locked-down rotor retention at every position, smooth, balanced propulsion, consistent service torque across the aircraft, clean threads and positive hex drives, motor mounting threads protected from worn fasteners, full-aircraft hardware uniformity, oEM fit and factory clamping force, professional fleet standards, and increased aircraft uptime. \u003c\/p\u003e\n\u003cp\u003eThe OEM Propeller Screw Kit is designed to fasten and retain every propeller assembly on the DJI Agras T50 and T40 propulsion systems with factory clamping force.\u003c\/p\u003e\n\u003cp\u003eReliable propulsion begins with hardware that holds — every screw, every position, every flight. The propellers, the motors, the arms, and the airframe are all engineered around joints that stay tight, and none of that engineering does anything on a joint that has started to move.\u003c\/p\u003e\n\u003cp\u003eReplacing worn hardware restores the secure rotor retention the propulsion system was engineered around, at the lowest cost of any intervention available on the aircraft.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T50 - T40 OEM Propeller Screw Kit (32 Screws) is a complete flight-critical fastener set for the propulsion systems of the DJI Agras T50 and T40 agricultural drones. Thirty-two screws is not an arbitrary count — it is enough to refresh all eight propeller positions on the aircraft in a single kit, which means a propulsion hardware renewal is one order and one bench session rather than a partial job done twice.\u003c\/p\u003e\n\u003cp\u003eThat distinction is why propulsion hardware is treated as a consumable on commercial aircraft rather than as permanent structure. A screw that has been torqued, loosened, and re-torqued through dozens of prop swaps, exposed to chemical between each one, is not the same fastener it was when it came out of the bag — and the joint it sits in is the one carrying the aircraft.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T50 OEM Propeller Screw Kit (32 Screws) earns its place in this kit because of how it fails. Operators replace it when they see stripped or rounded screw heads, a drive that feels soft or slips under the tool, worn, galled, or damaged threads, corrosion on shanks, heads, or drives, screws that no longer hold torque between services, fasteners found loose at inspection, missing screws discovered at preflight, or hardware fatigue on high-hour aircraft. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.\u003c\/p\u003e\n\u003ch3\u003e2. DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829)\u003c\/strong\u003e — DJI material number \u003cstrong\u003eYC.JG.ZS003829\u003c\/strong\u003e. Propeller clip gasket set \/ vibration-isolation inserts. It installs at the propeller clip retention assemblies. Its job on the aircraft is straightforward: vibration isolation, retention cushioning, and wear protection.\u003c\/p\u003e\n\u003cp\u003eOn the DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829), construction is original DJI elastomer gasket material; it mounts as direct-fit OEM replacement components; this line supplies 16 Pieces (complete aircraft set). Fitment covers DJI Agras T40, DJI Agras T50. Application: agricultural drone propulsion system maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.\u003c\/p\u003e\n\u003cp\u003eFunctionally, the DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829) is responsible for a short and specific list of jobs: cushion propeller retention hardware, reduce vibration transfer through the propulsion assembly, support stable propeller seating, minimize mechanical wear at the clips, improve flight smoothness, protect motors and retention components, extend propulsion component lifespan, replace compressed, hardened, or cracked gaskets, renew all sixteen positions in one set, and maintain OEM retention performance. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.\u003c\/p\u003e\n\u003cp\u003eIn commercial service the DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829) lives through continuous vibration at every position, high-RPM propeller operation, repeated propeller installation cycles, compression loading flight after flight, heat and temperature fluctuations, moisture and humidity, agricultural chemical environments, uV exposure across long seasons, and transport and handling vibration. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.\u003c\/p\u003e\n\u003cp\u003eLeft in service past its useful life, the DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829) may contribute to increased propulsion vibration, retention hardware wear, propeller movement at the clip, reduced flight smoothness, mechanical fatigue spreading outward, excessive propulsion noise, premature component wear, unexpected maintenance events, and reduced fleet reliability. A fresh one instead maintains vibration stopped at the source, motors and retention hardware protected, the smooth baseline the aircraft was tuned for, all sixteen positions renewed at once, professional fleet standards, increased aircraft uptime, reliable commercial performance, and long-term operational confidence. \u003c\/p\u003e\n\u003cp\u003eThe DJI T40 - T50 Original Propeller Clip Gasket Set is the 16-piece propulsion maintenance kit for the DJI Agras T40 and T50 agricultural drones — the cushioning and vibration-isolation inserts installed within the propeller clip retention assembly at every rotor position.\u003c\/p\u003e\n\u003cp\u003eConstructed from durable elastomer materials engineered for agricultural drone applications, each gasket helps maintain secure propeller retention while reducing vibration transfer through the propulsion assembly. Small in size, these precision components protect high-value propulsion hardware — motors, clips, and retention components — through every flight of demanding commercial duty. As a complete 16-piece set, one box renews every position on the aircraft at once.\u003c\/p\u003e\n\u003cp\u003eOver time, this duty compresses, hardens, deforms, and cracks the elastomer — and degraded gaskets mean vibration rising while retention performance declines.\u003c\/p\u003e\n\u003cp\u003eThe cheapest parts on the aircraft often protect the most expensive ones — and the clip gasket is the textbook case. A few grams of elastomer stand between high-RPM vibration and the motors, clips, and airframe hardware that vibration destroys. When the gasket does its job, nobody notices; when it stops, everything downstream starts aging faster.\u003c\/p\u003e\n\u003cp\u003eVibration damage is also the slowest-motion failure in the fleet: it loosens fasteners over weeks, fatigues hardware over months, and degrades sensors over a season — all traceable back to cushioning that quietly went hard. Renewing all sixteen gaskets at propulsion service costs minutes and small-parts money, and buys back the vibration baseline the whole aircraft was tuned for.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829) earns its place in this kit because of how it fails. Operators replace it when they see cracked gasket surfaces, hardened, aged elastomer, compression deformation or flattening, missing gaskets at any position, propeller clip looseness, visible wear at the retention assembly, new or worsening flight vibration, or reduced cushioning performance. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.\u003c\/p\u003e\n\u003ch3\u003e3. DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft\u003c\/strong\u003e. Fixing nut and adapter shaft \/ spray system connection hardware. It installs at the spray system fluid connection point. Its job on the aircraft is straightforward: secures and seals the spray fluid path connection.\u003c\/p\u003e\n\u003cp\u003eThis line is configured by Ares Acres for the airframe named in the kit title. The description above covers what the component does and where it sits, which is common across the models it serves; the DJI material number is not printed here because it differs between airframes. Ask us and we will confirm the exact number for your aircraft before the kit ships.\u003c\/p\u003e\n\u003cp\u003eOn the DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft, construction is durable molded and machined components; the design is matched threaded nut and adapter shaft pair; it mounts as direct-fit replacement components; this line supplies 1 Fixing Nut + 1 Adapter Shaft. Fitment covers DJI Agras T50, DJI Agras T40. Application: agricultural drone spray system maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.\u003c\/p\u003e\n\u003cp\u003eFunctionally, the DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft is responsible for a short and specific list of jobs: lock the fluid path connection securely, seal the joint against leaks and weeping, maintain consistent fluid distribution, resist vibration-driven loosening, withstand chemical exposure at the joint, replace worn, stripped, or leaking hardware, restore factory connection integrity, install quickly to minimize downtime, maintain correct fitment on the spray system, and support preventative maintenance. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.\u003c\/p\u003e\n\u003cp\u003eIn commercial service the DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft lives through constant liquid flow loading, abrasive chemical formulations, chemical corrosion attack, repeated service and torque cycles, cross-threading and over-tightening stress, vibration at every joint, pressure-washing and rinse cycles, uV exposure, and heat cycling in summer conditions. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.\u003c\/p\u003e\n\u003cp\u003eLeft in service past its useful life, the DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft may contribute to leaking or weeping joints, chemical drips and product waste, inconsistent fluid delivery, pressure loss in the spray system, chemical contact with the airframe, field teardowns and re-tightening stops, interrupted spraying missions, unexpected downtime, and higher repair costs over time. A fresh one instead maintains leak-free fluid connections, full spray system pressure, clean, waste-free operation, protected airframe surfaces, fast field-side service, factory fit and sealing, professional fleet standards, increased aircraft uptime, and reliable commercial performance. \u003c\/p\u003e\n\u003cp\u003eTake the pressure out of the system and get the product out of the line before anything is loosened. Relieve pressure, drain what you can into a container, and rinse the outside of the fitting so the residue on it is water rather than concentrate. Gloves and eye protection matter here more than almost anywhere else on the aircraft, because a joint that is about to be opened has been holding chemical under pressure and it does not always let go politely.\u003c\/p\u003e\n\u003cp\u003eHold the fitting still while you turn the nut. Put a second wrench or a firm hand on the body that the nut threads onto, so the torque you apply goes into the joint and not into the hose, the barb, or whatever is anchoring the plumbing behind it. Twisting the assembly behind a stuck nut is the standard route from a small weep to a broken fitting and a much longer afternoon.\u003c\/p\u003e\n\u003cp\u003eStart the nut by hand and give it several free turns before any tool touches it. This is the single most common place a good part is ruined during a field repair, because the joint is usually in an awkward spot, the operator is wearing gloves, and the nut goes on at a slight angle without anybody feeling it. If it will not start easily by hand, back it off completely and look at the thread rather than persuading it.\u003c\/p\u003e\n\u003cp\u003eUnderstand what is actually sealing the joint, because that is what tells you when to stop turning. On a joint like this the seal does the sealing and the nut only holds the faces together against it. Once the sealing element is properly compressed, additional turning adds nothing except deformation of the sealing face and stress in the threads. Go up in small increments and check, rather than settling it with one long confident pull.\u003c\/p\u003e\n\u003cp\u003ePut the line back the way it came off. Note which direction the hose left the fitting before you disturbed anything, and refit so it leaves the same way with no twist in it, using the printing along the hose as your reference. A line that is now pulling sideways on the joint puts a permanent bending load across the sealing face, and that joint will weep regardless of how carefully the nut was tightened.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft earns its place in this kit because of how it fails. Operators replace it when they see leaking or weeping at the connection, worn or cross-threaded nut threads, stripped or damaged adapter shaft threads, nuts that no longer tighten firmly, degraded sealing surfaces, chemical-related deterioration, cracks in the nut or shaft body, or brittle, UV-aged material. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe T40 OEM Propeller Hardware Refresh Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.\u003c\/p\u003e\n\u003cp\u003eWorking through the kit, the components do the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Agras T50 OEM Propeller Screw Kit (32 Screws)\u003c\/strong\u003e — Secures propeller assemblies with factory clamping force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829)\u003c\/strong\u003e — Vibration isolation, retention cushioning, and wear protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft\u003c\/strong\u003e — Secures and seals the spray fluid path connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect blades, motor shafts, clamps and adapters during service. Follow correct position, orientation and fastening procedures.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eAcross the components in this kit, the conditions that send an operator looking for these parts are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStripped or rounded screw heads\u003c\/li\u003e\n\u003cli\u003eA drive that feels soft or slips under the tool\u003c\/li\u003e\n\u003cli\u003eWorn, galled, or damaged threads\u003c\/li\u003e\n\u003cli\u003eCorrosion on shanks, heads, or drives\u003c\/li\u003e\n\u003cli\u003eScrews that no longer hold torque between services\u003c\/li\u003e\n\u003cli\u003eFasteners found loose at inspection\u003c\/li\u003e\n\u003cli\u003eMissing screws discovered at preflight\u003c\/li\u003e\n\u003cli\u003eHardware fatigue on high-hour aircraft\u003c\/li\u003e\n\u003cli\u003eChemical-related deterioration after heavy spray seasons\u003c\/li\u003e\n\u003cli\u003eWear from repeated installation and removal cycles\u003c\/li\u003e\n\u003cli\u003ePost-incident and hard-landing inspections\u003c\/li\u003e\n\u003cli\u003ePropeller replacement and propulsion rebuild projects\u003c\/li\u003e\n\u003cli\u003eSeasonal pre-season refresh and fleet refurbishment\u003c\/li\u003e\n\u003cli\u003eMaintenance inspection findings\u003c\/li\u003e\n\u003cli\u003eCracked gasket surfaces\u003c\/li\u003e\n\u003cli\u003eHardened, aged elastomer\u003c\/li\u003e\n\u003cli\u003eCompression deformation or flattening\u003c\/li\u003e\n\u003cli\u003eMissing gaskets at any position\u003c\/li\u003e\n\u003cli\u003ePropeller clip looseness\u003c\/li\u003e\n\u003cli\u003eVisible wear at the retention assembly\u003c\/li\u003e\n\u003cli\u003eNew or worsening flight vibration\u003c\/li\u003e\n\u003cli\u003eReduced cushioning performance\u003c\/li\u003e\n\u003cli\u003ePropeller instability\u003c\/li\u003e\n\u003cli\u003eHigh-hour propulsion hardware\u003c\/li\u003e\n\u003cli\u003ePropulsion system rebuild projects\u003c\/li\u003e\n\u003cli\u003eFleet refurbishment projects\u003c\/li\u003e\n\u003cli\u003ePreventative replacement schedules\u003c\/li\u003e\n\u003cli\u003eLeaking or weeping at the connection\u003c\/li\u003e\n\u003cli\u003eWorn or cross-threaded nut threads\u003c\/li\u003e\n\u003cli\u003eStripped or damaged adapter shaft threads\u003c\/li\u003e\n\u003cli\u003eNuts that no longer tighten firmly\u003c\/li\u003e\n\u003cli\u003eDegraded sealing surfaces\u003c\/li\u003e\n\u003cli\u003eChemical-related deterioration\u003c\/li\u003e\n\u003cli\u003eCracks in the nut or shaft body\u003c\/li\u003e\n\u003cli\u003eBrittle, UV-aged material\u003c\/li\u003e\n\u003cli\u003eJoints that loosen between missions\u003c\/li\u003e\n\u003cli\u003eSeasonal spray system rebuilds\u003c\/li\u003e\n\u003cli\u003ePreventative pre-season replacement\u003c\/li\u003e\n\u003cli\u003eLong-term commercial wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAny one of these on a T50 \/ T40 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Service Sequence \u0026amp; Fitting Notes\u003c\/h2\u003e\n\u003cp\u003eKits are bought by the job, so here is the job. The sequence below is a general order of work for the T40 OEM Propeller Hardware Refresh Kit on a T50 \/ T40; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1 — DJI Agras T50 OEM Propeller Screw Kit (32 Screws).\u003c\/strong\u003e Work at the propeller and propulsion system mounting points. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it secures propeller assemblies with factory clamping force as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2 — DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829).\u003c\/strong\u003e Work at the propeller clip retention assemblies. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it vibration isolation, retention cushioning, and wear protection as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3 — DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft.\u003c\/strong\u003e Work at the spray system fluid connection point. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it secures and seals the spray fluid path connection as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.\u003c\/p\u003e\n\u003cp\u003eFunction-check the aircraft on the ground before it goes back to work. For the T40 OEM Propeller Hardware Refresh Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKit type:\u003c\/strong\u003e Ares Acres curated service kit assembled from genuine DJI OEM components\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent lines:\u003c\/strong\u003e 3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft coverage:\u003c\/strong\u003e DJI Agras T50 \/ T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003cp\u003ePer-component specifications, as published on each component's own listing:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Propeller Screw Kit (32 Screws)\u003c\/strong\u003e\u003cbr\u003eComponent Type: Propulsion system fastener set \/ flight-critical mounting hardware\u003cbr\u003eInstallation Area: Propeller and propulsion system mounting points\u003cbr\u003eFunction: Secures propeller assemblies with factory clamping force\u003cbr\u003ePackage Quantity: 32 Screws\u003cbr\u003eConstruction: OEM precision-machined steel hardware\u003cbr\u003eMounting Type: Direct-fit OEM replacement hardware\u003cbr\u003eCompatibility: DJI Agras T50, DJI Agras T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829)\u003c\/strong\u003e\u003cbr\u003eDJI Material Number: YC.JG.ZS003829\u003cbr\u003eComponent Type: Propeller clip gasket set \/ vibration-isolation inserts\u003cbr\u003eInstallation Area: Propeller clip retention assemblies\u003cbr\u003eFunction: Vibration isolation, retention cushioning, and wear protection\u003cbr\u003ePackage Quantity: 16 Pieces (complete aircraft set)\u003cbr\u003eConstruction: Original DJI elastomer gasket material\u003cbr\u003eMounting Type: Direct-fit OEM replacement components\u003cbr\u003eCompatibility: DJI Agras T40, DJI Agras T50\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft\u003c\/strong\u003e\u003cbr\u003eMaterial number: configured per airframe — contact us to confirm\u003cbr\u003eComponent Type: Fixing nut and adapter shaft \/ spray system connection hardware\u003cbr\u003eInstallation Area: Spray system fluid connection point\u003cbr\u003eFunction: Secures and seals the spray fluid path connection\u003cbr\u003ePackage Quantity: 1 Fixing Nut + 1 Adapter Shaft\u003cbr\u003eConstruction: Durable molded and machined components\u003cbr\u003eMounting Type: Direct-fit replacement components\u003cbr\u003eCompatibility: DJI Agras T50, DJI Agras T40\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe T40 OEM Propeller Hardware Refresh Kit suits operators running DJI Agras T50 \/ T40 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Kit Matters\u003c\/h2\u003e\n\u003cp\u003eThese components are handled at the same propulsion-service interface. Keeping fresh screws, gaskets and adapter hardware together reduces reuse of worn small parts and avoids a second order during propeller maintenance.\u003c\/p\u003e\n\u003cp\u003eBought separately, these 3 lines are 3 chances to order the wrong variant, 3 shipments to wait on, and 3 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.\u003c\/p\u003e\n\u003cp\u003eThis kit gives T40 operators a dedicated small-hardware bundle rather than forcing them to purchase a T50-labeled bundle simply because parts share fitment.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧩 What This Kit Does Not Include\u003c\/h2\u003e\n\u003cp\u003eA kit is defined as much by its edges as by its contents. The T40 OEM Propeller Hardware Refresh Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T50 \/ T40 parts we stock separately — listed here so the second order does not become a second week of downtime:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDJI Agras T50 – T40 Propeller Screw Kit (32 Screws) Replenishment (Monthly Program)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNone of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T40 OEM Propeller Hardware Refresh Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct class:\u003c\/strong\u003e Curated multi-part service kit (not a factory-packaged DJI kit)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled by:\u003c\/strong\u003e Ares Acres LLC from genuine DJI OEM components\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Agras T50, DJI Agras T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent count:\u003c\/strong\u003e 3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e DJI Agras T50 OEM Propeller Screw Kit (32 Screws); installed at Propeller and propulsion system mounting points\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829); material number YC.JG.ZS003829; installed at Propeller clip retention assemblies\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft; installed at Spray system fluid connection point\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial numbers in this kit:\u003c\/strong\u003e YC.JG.ZS003829\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras reseller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T50\u003c\/p\u003e\u003cp\u003eDJI Agras T50 Parts\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Parts\u003c\/p\u003e\u003cp\u003eDJI Agras T50 repair kit\u003c\/p\u003e\u003cp\u003eAgras T50 parts USA\u003c\/p\u003e\u003cp\u003eDJI Agras T40\u003c\/p\u003e\u003cp\u003eDJI Agras T40 Parts\u003c\/p\u003e\u003cp\u003eDJI Agras T40 OEM Parts\u003c\/p\u003e\u003cp\u003eDJI Agras T40 repair kit\u003c\/p\u003e\u003cp\u003eAgras T40 parts USA\u003c\/p\u003e\u003cp\u003eT40 OEM Propeller Hardware Refresh Kit\u003c\/p\u003e\u003cp\u003eDJI Agras T40 OEM Propeller Hardware Refresh Kit\u003c\/p\u003e\u003cp\u003eT40 OEM Propeller Hardware Refresh Kit OEM\u003c\/p\u003e\u003cp\u003eT40 OEM Propeller Hardware Refresh Kit for sale\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Propeller Screw Kit (32 Screws)\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829)\u003c\/p\u003e\u003cp\u003eYC.JG.ZS003829\u003c\/p\u003e\u003cp\u003eDJI YC.JG.ZS003829\u003c\/p\u003e\u003cp\u003eDJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft\u003c\/p\u003e\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\u003cp\u003eDJI Agras Repair Kits\u003c\/p\u003e\u003cp\u003eagricultural drone parts\u003c\/p\u003e\u003cp\u003espray drone parts\u003c\/p\u003e\u003cp\u003eag drone parts USA\u003c\/p\u003e\u003cp\u003eauthorized DJI Agras reseller\u003c\/p\u003e\u003cp\u003eDJI Agras dealer USA\u003c\/p\u003e\u003cp\u003ebuy DJI Agras parts online\u003c\/p\u003e\u003cp\u003eDJI Agras parts free shipping\u003c\/p\u003e\u003cp\u003eAres Acres\u003c\/p\u003e\u003cp\u003eAres Acres LLC\u003c\/p\u003e\u003cp\u003eDJI Agras parts Albuquerque\u003c\/p\u003e\u003cp\u003eDJI Agras dealer New Mexico\u003c\/p\u003e\u003cp\u003eagricultural drone parts Albuquerque NM\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this an official DJI-boxed kit?\u003c\/strong\u003e No. It is assembled by Ares Acres from genuine DJI OEM components that are each sold individually in our catalog. We list it this way deliberately so there is no confusion about what you are buying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy just one component instead of the kit?\u003c\/strong\u003e Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many separate parts are in this kit?\u003c\/strong\u003e 3 component lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T50 propeller screw kit?\u003c\/strong\u003e It is a complete 32-piece set of OEM propeller mounting screws for the DJI Agras T50 and T40 — precision-machined steel fasteners built to OEM specification to clamp each propeller assembly securely to its motor with factory clamping force. They install at the propeller and propulsion system mounting points and are supplied brand new as direct-fit replacement hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich drones does this kit fit, and does 32 screws cover a whole aircraft?\u003c\/strong\u003e It fits the DJI Agras T50 and DJI Agras T40 propulsion systems. The 32-screw count is enough to refresh all eight propeller positions on a T50 or T40 in a single kit, which makes it a one-order propulsion hardware renewal rather than a partial job. That is also what makes it well suited to seasonal propulsion rebuilds, full propeller swaps, and multi-aircraft fleet maintenance where hardware uniformity across the aircraft matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the kit ready to use out of the box?\u003c\/strong\u003e Yes. It ships brand new as direct-fit OEM replacement hardware in OEM protective packaging, ready to install at the propeller and propulsion system mounting points with no preparation. What it does not do is replace the manual — torque every fastener to the values published in your DJI service documentation for your aircraft, using a calibrated driver rather than working by feel. Over-tightening is the failure mode that costs money here, because the damage lands in the motor threads rather than in the screw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does a loose propeller screw affect the motor as well as the propeller?\u003c\/strong\u003e Because the joint is a single load path, and once it starts moving the movement has to go somewhere. A fastener at correct torque presses the mating surfaces together hard enough that vibration cannot work them against one another. When preload falls off, the propeller assembly begins to move microscopically against its mount on every rotation, and that motion transfers as vibration and as wear into the motor and mounting hardware — the parts that cost real money. This is why loose hardware is treated as an urgent finding rather than a minor one: the screw is rarely what ends up damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the DJI Agras T50 OEM Propeller Screw Kit (32 Screws) go and what does it do?\u003c\/strong\u003e It installs at the propeller and propulsion system mounting points, where it secures propeller assemblies with factory clamping force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number for the DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829) in this kit?\u003c\/strong\u003e YC.JG.ZS003829. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI material number (part number) for the Agras T40 \/ T50 propeller clip gasket?\u003c\/strong\u003e The official DJI material number for the propeller clip gasket is YC.JG.ZS003829. This 16-piece set carries that number for every gasket, and matching it to your parts diagram or the old gasket's packaging confirms exact fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a DJI Agras propeller clip gasket?\u003c\/strong\u003e It is the elastomer cushioning insert fitted inside the propeller clip retention assembly on the DJI Agras T40 and T50, listed under DJI material number YC.JG.ZS003829. It seats the propeller in its retention hardware and isolates high-RPM vibration before that vibration reaches the clip, the motor, and the airframe around it. Ares Acres LLC lists it as a complete 16-piece set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DJI Agras models does this gasket set fit?\u003c\/strong\u003e The Specifications list fitment for the DJI Agras T40 and the DJI Agras T50. The gaskets are direct-fit OEM replacement components installed at the propeller clip retention assemblies on either aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy drone is vibrating — do I need new propellers or new clip gaskets?\u003c\/strong\u003e These are two different parts of the same rotor. The propeller is the blade; the gasket sits behind it inside the retention assembly, cushioning the clip that holds the blade in position. A blade in perfect condition can still be seated on cushioning that has hardened and compressed, so a vibration complaint on visually sound propellers is worth tracing into the retention hardware rather than stopping at the blades. Ares Acres stocks propellers and propeller retention hardware as separate listings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the DJI Agras T50 OEM Propeller Clip Gasket (16 Pcs) (YC.JG.ZS003829) go and what does it do?\u003c\/strong\u003e It installs at the propeller clip retention assemblies, where it vibration isolation, retention cushioning, and wear protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras fixing nut and adapter shaft?\u003c\/strong\u003e It is a matched two-piece connection hardware set — one threaded fixing nut and its mating adapter shaft — that locks and seals the spray system's fluid path on the DJI Agras T50 and T40.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich drones does this hardware fit?\u003c\/strong\u003e The DJI Agras T50 and T40 spray systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e One fixing nut and one adapter shaft, supplied as a matched pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the signs this spray connection hardware needs replacing?\u003c\/strong\u003e Leaking or weeping at the connection, worn or cross-threaded threads, a nut that no longer tightens firmly, degraded sealing surfaces, or cracks in the nut or shaft body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the DJI Agras T40-compatible OEM Fixing Nut and Adapter Shaft go and what does it do?\u003c\/strong\u003e It installs at the spray system fluid connection point, where it secures and seals the spray fluid path connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does this kit cover?\u003c\/strong\u003e DJI Agras T50, DJI Agras T40. Confirm the component variant against your aircraft's parts diagram before installation.\u003c\/p\u003e\n\u003chr\u003e","brand":"Ares Acres","offers":[{"title":"Default","offer_id":53089785250112,"sku":"ARES-T40-PROP-HDW-02","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/2F633F44-B366-4FA7-95A2-F9AED830E243.png?v=1763111326","url":"https:\/\/aresacres.com\/products\/dji-agras-t40-oem-propeller-hardware-refresh-kit","provider":"Ares Acres","version":"1.0","type":"link"}