{"product_id":"dji-agras-t50-oem-shell-cover-refresh-kit","title":"DJI Agras T50 OEM Shell \u0026 Cover Refresh Kit","description":"\u003cp\u003e\u003cstrong\u003eT50 OEM Shell \u0026amp; Cover Refresh Kit | DJI Agras T50 OEM Front Upper Shell Case Module | DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397) | DJI Agras T50 OEM Transparent Omnidirectional Radar Cover | DJI Agras T50 OEM Distribution Board Protection Cover (Pair) | Genuine DJI OEM Components | Ares Acres Curated Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit contents:\u003c\/strong\u003e 4 component lines, 4 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eA kit is a bet against downtime. The T50 OEM Shell \u0026amp; Cover Refresh Kit exists because the parts inside it are the ones that strand a T50 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.\u003c\/p\u003e\n\u003cp\u003eThat is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T50 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfigured for the DJI Agras T50 shell set. Every component in this kit remains available separately in the Ares Acres catalog.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T50 OEM Front Upper Shell Case Module\u003c\/li\u003e\n\u003cli\u003e1 × DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397)\u003c\/li\u003e\n\u003cli\u003e1 × DJI Agras T50 OEM Transparent Omnidirectional Radar Cover\u003c\/li\u003e\n\u003cli\u003e1 × DJI Agras T50 OEM Distribution Board Protection Cover (Pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Kit Overview\u003c\/h2\u003e\n\u003cp\u003eThe DJI Agras T50 OEM Shell \u0026amp; Cover Refresh Kit is an Ares Acres curated package that groups the components this job actually consumes into a single purchase. Shells crack, radar covers craze and board covers go brittle from UV and chemical exposure. None of it is structural, all of it is what keeps water and dust out of parts that are.\u003c\/p\u003e\u003cp\u003eThis product is assembled by Ares Acres from genuine DJI OEM components sold individually in our catalog. It is not represented as a factory-packaged DJI kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔩 Component-by-Component Breakdown\u003c\/h2\u003e\n\u003ch3\u003e1. DJI Agras T50 OEM Front Upper Shell Case Module\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Front Upper Shell Case Module\u003c\/strong\u003e. Front upper shell \/ housing replacement. Its job on the aircraft is straightforward: environmental and impact protection for forward electronics, sensors, and power connections.\u003c\/p\u003e\n\u003cp\u003eFunctionally, the DJI Agras T50 OEM Front Upper Shell Case Module is responsible for a short and specific list of jobs: protect forward electronics from impact damage, shield sensors and wiring from dust and debris, block moisture and washdown water, resist chemical and fertilizer contact, maintain factory structural integrity, preserve proper airframe profile, maintain factory fit and finish, restore aircraft after housing damage, avoid larger assembly replacements, and support professional repair standards. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.\u003c\/p\u003e\n\u003cp\u003eA fresh one instead maintains protected forward electronics and sensors, factory structural integrity, sealed protection against dust and water, clean, professional fleet appearance, low-cost recovery from housing damage, full aircraft availability, extended airframe service life, reduced downtime and repair costs, and dependable commercial performance. \u003c\/p\u003e\n\u003cp\u003eThe front upper shell seals and protects the aircraft's forward section, shielding electronics, sensors, and power connections from the field environment.\u003c\/p\u003e\n\u003cp\u003eDisconnect the batteries and let the aircraft sit before you remove a panel that covers power connections. You are about to have metal tools inside a bay full of connectors and wiring, and a screwdriver bridging a live terminal in there is a far more expensive event than a cracked shell. Work on a clean bench or a covered tailgate rather than in the field if you have the choice, because everything that falls into the nose while the housing is off has to come back out again.\u003c\/p\u003e\n\u003cp\u003eMap the fasteners as they come out. Housing screws on these airframes are not one length, and a long screw driven into a short boss either splits the boss or bottoms against something behind it. Push each fastener through a piece of cardboard or foam laid out in the same pattern as the panel, or tape them to a sketch, so every one goes back where it came from. Note as well which holes had washers or captive hardware, because those details do not survive a coffee break in a magnetic tray.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T50 OEM Front Upper Shell Case Module earns its place in this kit because of how it fails. Operators replace it when they see visible cracks or fractures in the shell, broken mounting tabs or screw bosses, impact damage from transport or handling, warped or deformed housing, gaps that no longer seal correctly, uV chalking, fading, or brittleness, chemical degradation of the plastic, or deep abrasion or gouging. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.\u003c\/p\u003e\n\u003ch3\u003e2. DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397)\u003c\/strong\u003e — DJI material number \u003cstrong\u003eYC.JG.ZS003397\u003c\/strong\u003e. Rear battery cover \/ structural shell replacement. Its job on the aircraft is straightforward: environmental and impact protection for the rear battery area and structure.\u003c\/p\u003e\n\u003cp\u003eFunctionally, the DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397) is responsible for a short and specific list of jobs: protect rear internals from impact damage, shield components from dust and debris, block moisture and washdown water, resist chemical and fertilizer contact, maintain factory structural integrity, preserve proper airframe aerodynamic profile, maintain factory fit and finish, restore aircraft after housing damage, avoid larger assembly replacements, and support professional repair standards. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.\u003c\/p\u003e\n\u003cp\u003eA fresh one instead maintains protected rear electronics and battery area, factory structural integrity, sealed protection against dust and water, clean, professional fleet appearance, low-cost recovery from housing damage, full aircraft availability, extended airframe service life, reduced downtime and repair costs, and dependable commercial performance. \u003c\/p\u003e\n\u003cp\u003eThe DJI Agras Original Rear Back Shell Case Module is the genuine replacement rear housing for the DJI Agras T50, T40, and T25 airframes. This precision-molded shell protects the battery area and rear structural assembly from dust, moisture, impact, and vibration while maintaining the factory fit and finish of the aircraft.\u003c\/p\u003e\n\u003cp\u003eAgricultural airframes take a beating — transport knocks, field-side handling, chemical exposure, and season after season of sun. The rear shell is sacrificial by design: it absorbs the scuffs, cracks, and UV so the wiring, connectors, and structure behind it don't have to.\u003c\/p\u003e\n\u003cp\u003eInstead of replacing a full battery or power system assembly, installing this rear shell provides a cost-effective repair that restores original strength and appearance in one swap.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397) earns its place in this kit because of how it fails. Operators replace it when they see visible cracks or fractures in the shell, broken mounting tabs or screw bosses, impact damage from transport or handling, warped or deformed housing, gaps that no longer seal correctly, uV chalking, fading, or brittleness, chemical degradation of the plastic, or deep abrasion or gouging. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.\u003c\/p\u003e\n\u003ch3\u003e3. DJI Agras T50 OEM Transparent Omnidirectional Radar Cover\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Transparent Omnidirectional Radar Cover\u003c\/strong\u003e is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.\u003c\/p\u003e\n\u003cp\u003eThe omnidirectional radar powers obstacle detection and terrain-following — the safety systems that keep your Agras at consistent height over uneven ground and stop it before it meets a pole, tree line, or pivot. The cover's job is to protect that module while staying radar-invisible. A genuine DJI cover ensures precise radar transmission, maintains environmental sealing, and extends the operational life of the sensing hardware.\u003c\/p\u003e\n\u003cp\u003eClean the outside before you open it. Everything sitting in the seam ends up on the module the moment the dome lifts, and grit on an antenna face or a sealing surface is a problem you have just created for yourself. Rinse the area, dry it, then power down and disconnect the flight batteries. Work somewhere out of the wind if you can, because a radar module open on a dusty tailgate collects exactly what it should never have on it.\u003c\/p\u003e\n\u003cp\u003eThe fasteners into a dome like this go into small bosses and strip easily. Use a driver that fits properly, turn by hand, and keep a power tool out of it entirely. Back them out in a few passes around the perimeter rather than fully unscrewing each in turn, so the dome releases evenly instead of levering on the last fastener holding it. If the dome sticks to its seal, work it loose around the edge with steady hand pressure instead of prying with a screwdriver against a clear part.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T50 OEM Transparent Omnidirectional Radar Cover earns its place in this kit because of how it fails. Operators replace it when they see cracked, chipped, or hazed radar dome, obstacle-avoidance warnings or degraded terrain-following after a strike, moisture or chemical residue visible inside the cover, scratching or clouding that reduces cover clarity, contact with branches, wires, or crop canopy at working height, chemical etching from prolonged spray exposure without rinse-down, hard landings or transport impacts, or uV embrittlement over multiple seasons. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.\u003c\/p\u003e\n\u003ch3\u003e4. DJI Agras T50 OEM Distribution Board Protection Cover (Pair)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Distribution Board Protection Cover (Pair)\u003c\/strong\u003e. Distribution board protection covers \/ electronics shielding hardware. It installs at the distribution board housing. Its job on the aircraft is straightforward: shields power electronics from dust, moisture, and contaminants.\u003c\/p\u003e\n\u003cp\u003eOn the DJI Agras T50 OEM Distribution Board Protection Cover (Pair), construction is durable, waterproof materials; the design is secure direct-fit protective cover; it mounts as direct-fit OEM replacement components; this line supplies 2 Covers (Pair). Fitment covers DJI Agras T50, DJI Agras T40. Application: agricultural drone electrical system protection. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.\u003c\/p\u003e\n\u003cp\u003eFunctionally, the DJI Agras T50 OEM Distribution Board Protection Cover (Pair) is responsible for a short and specific list of jobs: shield the distribution board from dust and debris, block moisture during missions and washdowns, keep chemical residue off traces and terminals, preserve electrical system integrity, extend the life of critical electronics, attach quickly and securely during service, replace cracked, warped, or missing covers, restore factory-grade board protection, cover the fleet with a two-piece set, and maintain correct fitment across both models. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.\u003c\/p\u003e\n\u003cp\u003eIn commercial service the DJI Agras T50 OEM Distribution Board Protection Cover (Pair) lives through chemical mist and spray drift every mission, dust and airborne field debris, pressure-washing and rinse cycles, uV exposure across long seasons, heat and cold cycling in the field, vibration stress at mounting points, impact and abrasion during service, moisture and humidity swings, and removal cycles at every board service. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.\u003c\/p\u003e\n\u003cp\u003eLeft in service past its useful life, the DJI Agras T50 OEM Distribution Board Protection Cover (Pair) may contribute to moisture reaching live terminals, chemical residue settling on the board, dust packing into connectors, corrosion creeping across traces, electrical gremlins and intermittent faults, shortened distribution board life, interrupted spraying missions, unexpected downtime, and reduced fleet reliability. A fresh one instead maintains electronics sealed against the field, washdowns without worry, a distribution board that lasts its full life, both aircraft boards covered as a set, two-model fleet coverage, professional fleet standards, increased aircraft uptime, reliable commercial performance, and long-term operational confidence. \u003c\/p\u003e\n\u003cp\u003eEverything the environment throws at the aircraft's power hub lands on this cover first — and the electronics stay healthy only as long as the shield does.\u003c\/p\u003e\n\u003cp\u003eTreat the compartment as live until you have proved otherwise. This is the aircraft's power distribution point, so every system on the machine draws through what is under that cover. Shut down, disconnect the flight batteries, and follow DJI's documentation on residual charge and wait times before anything conductive goes near the terminals. Keep loose tools out of the area, because a driver bridging two terminals here is not a spark, it is a destroyed board and possibly a fire.\u003c\/p\u003e\n\u003cp\u003eClean and dry the outside of the cover before you take it off. Everything sitting in the seam, on the fasteners, and on the top face falls straight onto the electronics the instant the cover lifts, and dust that reaches a board is far harder to remove than dust on a panel. Brush and rinse the area, blow the seam out with low-pressure air, and let it dry completely. Opening a wet or dirty cover to inspect for contamination is a good way to create the contamination you were looking for.\u003c\/p\u003e\n\u003cp\u003eThe DJI Agras T50 OEM Distribution Board Protection Cover (Pair) earns its place in this kit because of how it fails. Operators replace it when they see cracked or split cover bodies, warped or poorly seating covers, brittle, UV-chalked material, broken mounting tabs or clips, gaps at the sealing edges, moisture or dust found under the cover, chemical staining and material attack, or covers lost during field service. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe T50 OEM Shell \u0026amp; Cover Refresh Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.\u003c\/p\u003e\n\u003cp\u003eWorking through the kit, the components do the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Agras T50 OEM Front Upper Shell Case Module\u003c\/strong\u003e — Environmental and impact protection for forward electronics, sensors, and power connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397)\u003c\/strong\u003e — Environmental and impact protection for the rear battery area and structure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Agras T50 OEM Transparent Omnidirectional Radar Cover\u003c\/strong\u003e — supplied for the application named in the kit title\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Agras T50 OEM Distribution Board Protection Cover (Pair)\u003c\/strong\u003e — Shields power electronics from dust, moisture, and contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFit covers with all original fasteners and check gasket faces are clean before closing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eAcross the components in this kit, the conditions that send an operator looking for these parts are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVisible cracks or fractures in the shell\u003c\/li\u003e\n\u003cli\u003eBroken mounting tabs or screw bosses\u003c\/li\u003e\n\u003cli\u003eImpact damage from transport or handling\u003c\/li\u003e\n\u003cli\u003eWarped or deformed housing\u003c\/li\u003e\n\u003cli\u003eGaps that no longer seal correctly\u003c\/li\u003e\n\u003cli\u003eUV chalking, fading, or brittleness\u003c\/li\u003e\n\u003cli\u003eChemical degradation of the plastic\u003c\/li\u003e\n\u003cli\u003eDeep abrasion or gouging\u003c\/li\u003e\n\u003cli\u003eLoose fit or rattling in flight\u003c\/li\u003e\n\u003cli\u003eDamage found during forward-section service\u003c\/li\u003e\n\u003cli\u003ePost-incident inspection findings\u003c\/li\u003e\n\u003cli\u003eFleet refurbishment programs\u003c\/li\u003e\n\u003cli\u003eLong-term commercial wear\u003c\/li\u003e\n\u003cli\u003eDamage found during rear-section service\u003c\/li\u003e\n\u003cli\u003eCracked, chipped, or hazed radar dome\u003c\/li\u003e\n\u003cli\u003eObstacle-avoidance warnings or degraded terrain-following after a strike\u003c\/li\u003e\n\u003cli\u003eMoisture or chemical residue visible inside the cover\u003c\/li\u003e\n\u003cli\u003eScratching or clouding that reduces cover clarity\u003c\/li\u003e\n\u003cli\u003eContact with branches, wires, or crop canopy at working height\u003c\/li\u003e\n\u003cli\u003eChemical etching from prolonged spray exposure without rinse-down\u003c\/li\u003e\n\u003cli\u003eHard landings or transport impacts\u003c\/li\u003e\n\u003cli\u003eUV embrittlement over multiple seasons\u003c\/li\u003e\n\u003cli\u003eCracked or split cover bodies\u003c\/li\u003e\n\u003cli\u003eWarped or poorly seating covers\u003c\/li\u003e\n\u003cli\u003eBrittle, UV-chalked material\u003c\/li\u003e\n\u003cli\u003eBroken mounting tabs or clips\u003c\/li\u003e\n\u003cli\u003eGaps at the sealing edges\u003c\/li\u003e\n\u003cli\u003eMoisture or dust found under the cover\u003c\/li\u003e\n\u003cli\u003eChemical staining and material attack\u003c\/li\u003e\n\u003cli\u003eCovers lost during field service\u003c\/li\u003e\n\u003cli\u003eImpact damage from handling\u003c\/li\u003e\n\u003cli\u003eHigh-hour protective hardware\u003c\/li\u003e\n\u003cli\u003eMaintenance inspection findings\u003c\/li\u003e\n\u003cli\u003eElectrical system service work\u003c\/li\u003e\n\u003cli\u003eFleet refurbishment projects\u003c\/li\u003e\n\u003cli\u003ePreventative pre-season replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAny one of these on a T50 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Service Sequence \u0026amp; Fitting Notes\u003c\/h2\u003e\n\u003cp\u003eKits are bought by the job, so here is the job. The sequence below is a general order of work for the T50 OEM Shell \u0026amp; Cover Refresh Kit on a T50; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1 — DJI Agras T50 OEM Front Upper Shell Case Module.\u003c\/strong\u003e Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Once fitted, confirm that it environmental and impact protection for forward electronics, sensors, and power connections as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2 — DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397).\u003c\/strong\u003e Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Once fitted, confirm that it environmental and impact protection for the rear battery area and structure as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3 — DJI Agras T50 OEM Transparent Omnidirectional Radar Cover.\u003c\/strong\u003e Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4 — DJI Agras T50 OEM Distribution Board Protection Cover (Pair).\u003c\/strong\u003e Work at the distribution board housing. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it shields power electronics from dust, moisture, and contaminants as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.\u003c\/p\u003e\n\u003cp\u003eFunction-check the aircraft on the ground before it goes back to work. For the T50 OEM Shell \u0026amp; Cover Refresh Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKit type:\u003c\/strong\u003e Ares Acres curated service kit assembled from genuine DJI OEM components\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent lines:\u003c\/strong\u003e 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft coverage:\u003c\/strong\u003e DJI Agras T50\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003cp\u003ePer-component specifications, as published on each component's own listing:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Front Upper Shell Case Module\u003c\/strong\u003e\u003cbr\u003eComponent Type: Front upper shell \/ housing replacement\u003cbr\u003eFunction: Environmental and impact protection for forward electronics, sensors, and power connections\u003cbr\u003eCompatibility: DJI Agras T50, DJI Agras T40, DJI Agras T25\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397)\u003c\/strong\u003e\u003cbr\u003eDJI Material Number: YC.JG.ZS003397\u003cbr\u003eComponent Type: Rear battery cover \/ structural shell replacement\u003cbr\u003eFunction: Environmental and impact protection for the rear battery area and structure\u003cbr\u003eCompatibility: DJI Agras T50, DJI Agras T40, DJI Agras T25\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Transparent Omnidirectional Radar Cover\u003c\/strong\u003e — full published specifications for this component are on its own catalog listing; it is supplied here exactly as sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Agras T50 OEM Distribution Board Protection Cover (Pair)\u003c\/strong\u003e\u003cbr\u003eComponent Type: Distribution board protection covers \/ electronics shielding hardware\u003cbr\u003eInstallation Area: Distribution board housing\u003cbr\u003eFunction: Shields power electronics from dust, moisture, and contaminants\u003cbr\u003ePackage Quantity: 2 Covers (Pair)\u003cbr\u003eConstruction: Durable, waterproof materials\u003cbr\u003eMounting Type: Direct-fit OEM replacement components\u003cbr\u003eCompatibility: DJI Agras T50, DJI Agras T40\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCracked or brittle body shells\u003c\/li\u003e\n\u003cli\u003eCrazed radar cover\u003c\/li\u003e\n\u003cli\u003eCosmetic refresh before resale\u003c\/li\u003e\n\u003cli\u003eWater ingress prevention\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe T50 OEM Shell \u0026amp; Cover Refresh Kit suits operators running DJI Agras T50 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Kit Matters\u003c\/h2\u003e\n\u003cp\u003eEvery one of these parts is exposed to the same UV and chemical mist and reaches the end of its life at roughly the same time. Ordering them together removes the second shipping window from the middle of a repair, which during a spray season is the part that actually costs money.\u003c\/p\u003e\n\u003cp\u003eBought separately, these 4 lines are 4 chances to order the wrong variant, 4 shipments to wait on, and 4 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.\u003c\/p\u003e\n\u003cp\u003eAres Acres builds DJI Agras parts solutions around real maintenance jobs, so operators spend less time searching for the part they did not know they needed. Free and fast U.S. shipping, same-day dispatch on in-stock kits, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧩 What This Kit Does Not Include\u003c\/h2\u003e\n\u003cp\u003eA kit is defined as much by its edges as by its contents. The T50 OEM Shell \u0026amp; Cover Refresh Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T50 parts we stock separately — listed here so the second order does not become a second week of downtime:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDJI Agras T50 OEM Cable Distribution Board Module (BC.AG.SS000676) — BC.AG.SS000676\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Front Radar Module (BC.AG.SS000939) — BC.AG.SS000939\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Power Distribution Board Module (BC.AG.SS000691) — BC.AG.SS000691\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Power Distribution Board Module (Cables Included) (BC.AG.SS000691) — BC.AG.SS000691\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Rear Radar Module (BC.AG.SS000940) — BC.AG.SS000940\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Front Body Shell\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Front Cover\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Rear Bottom Cover\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Rear Shell Bottom Plate (YC.JG.ZS003395) — YC.JG.ZS003395\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50 OEM Rear Vision Radar Signal Cable (YC.XC.XX001012) — YC.XC.XX001012\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNone of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T50 OEM Shell \u0026amp; Cover Refresh Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct class:\u003c\/strong\u003e Curated multi-part service kit (not a factory-packaged DJI kit)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled by:\u003c\/strong\u003e Ares Acres LLC from genuine DJI OEM components\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Agras T50\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent count:\u003c\/strong\u003e 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e DJI Agras T50 OEM Front Upper Shell Case Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397); material number YC.JG.ZS003397\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e DJI Agras T50 OEM Transparent Omnidirectional Radar Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e DJI Agras T50 OEM Distribution Board Protection Cover (Pair); installed at Distribution board housing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial numbers in this kit:\u003c\/strong\u003e YC.JG.ZS003397\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras reseller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T50\u003c\/p\u003e\u003cp\u003eDJI Agras T50 Parts\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Parts\u003c\/p\u003e\u003cp\u003eDJI Agras T50 repair kit\u003c\/p\u003e\u003cp\u003eAgras T50 parts USA\u003c\/p\u003e\u003cp\u003eT50 OEM Shell \u0026amp; Cover Refresh Kit\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Shell \u0026amp; Cover Refresh Kit\u003c\/p\u003e\u003cp\u003eT50 OEM Shell \u0026amp; Cover Refresh Kit OEM\u003c\/p\u003e\u003cp\u003eT50 OEM Shell \u0026amp; Cover Refresh Kit for sale\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Front Upper Shell Case Module\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397)\u003c\/p\u003e\u003cp\u003eYC.JG.ZS003397\u003c\/p\u003e\u003cp\u003eDJI YC.JG.ZS003397\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Transparent Omnidirectional Radar Cover\u003c\/p\u003e\u003cp\u003eDJI Agras T50 OEM Distribution Board Protection Cover (Pair)\u003c\/p\u003e\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\u003cp\u003eDJI Agras Repair Kits\u003c\/p\u003e\u003cp\u003eagricultural drone parts\u003c\/p\u003e\u003cp\u003espray drone parts\u003c\/p\u003e\u003cp\u003eag drone parts USA\u003c\/p\u003e\u003cp\u003eauthorized DJI Agras reseller\u003c\/p\u003e\u003cp\u003eDJI Agras dealer USA\u003c\/p\u003e\u003cp\u003ebuy DJI Agras parts online\u003c\/p\u003e\u003cp\u003eDJI Agras parts free shipping\u003c\/p\u003e\u003cp\u003eAres Acres\u003c\/p\u003e\u003cp\u003eAres Acres LLC\u003c\/p\u003e\u003cp\u003eDJI Agras parts Albuquerque\u003c\/p\u003e\u003cp\u003eDJI Agras dealer New Mexico\u003c\/p\u003e\u003cp\u003eagricultural drone parts Albuquerque NM\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre the individual parts still available?\u003c\/strong\u003e\u003cbr\u003eYes. Every component remains listed separately and always will be.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an official DJI boxed kit?\u003c\/strong\u003e\u003cbr\u003eNo. It is an Ares Acres curated kit built from genuine OEM components, packed and shipped by us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy just one component instead of the kit?\u003c\/strong\u003e Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many separate parts are in this kit?\u003c\/strong\u003e 4 component lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras front upper shell case module?\u003c\/strong\u003e It is the genuine DJI replacement for the forward upper housing of the DJI Agras T50, T40, and T25 — the shell that covers the aircraft's forward section and shields the electronics, sensors, and power connections behind it from dust, moisture, chemical residue, and impact. Ares Acres LLC stocks it as an OEM replacement part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know whether I need the front shell or the rear shell?\u003c\/strong\u003e They are separate, position-specific parts sold as separate listings, so the one to order is the one covering the damaged section. This is the forward upper housing over the electronics and sensor area at the nose; the housing over the rear battery area and rear structure is a different listing. Each order is a single shell, so a strike that damaged both sections needs both ordered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number for the DJI Agras T50 OEM Rear Shell Case Module (YC.JG.ZS003397) in this kit?\u003c\/strong\u003e YC.JG.ZS003397. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI material number (part number) for the Agras T50 rear shell case module?\u003c\/strong\u003e The official DJI material number is YC.JG.ZS003397. Match it to your parts diagram or the label on the original part to confirm exact fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras rear shell case module?\u003c\/strong\u003e It is the genuine DJI replacement rear housing for the DJI Agras T50, T40, and T25 — the precision-molded outer shell covering the aircraft's rear battery area and rear structural assembly, protecting what sits behind it from dust, moisture, impact, and vibration. Ares Acres LLC stocks it as an OEM replacement part. It carries DJI material number YC.JG.ZS003397.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras transparent omnidirectional radar cover?\u003c\/strong\u003e It is the clear protective dome that encloses the omnidirectional radar module on a DJI Agras agricultural drone, shielding the sensor from dust, moisture, spray residue, and impact while allowing the radar signal to pass through unobstructed. The genuine DJI part carries SKU AG-RADARCOV-T100-T25-000962 and is stocked by Ares Acres, a U.S.-based authorized DJI Agras reseller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DJI Agras models does this radar cover fit?\u003c\/strong\u003e The cover is listed for the DJI Agras T100, T70, T50, T40, and T25 omnidirectional radar assemblies. One part number covers all five platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras Distribution Board Protection Cover?\u003c\/strong\u003e It is the protective shield that fits over the distribution board, keeping dust, moisture, chemical mist, and contaminants off the aircraft's power electronics. Ares Acres supplies it as a genuine OEM direct-fit pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DJI Agras models do these protection covers fit?\u003c\/strong\u003e These covers fit the DJI Agras T50 and the DJI Agras T40, mounting at the distribution board housing on both aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the DJI Agras T50 OEM Distribution Board Protection Cover (Pair) go and what does it do?\u003c\/strong\u003e It installs at the distribution board housing, where it shields power electronics from dust, moisture, and contaminants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does this kit cover?\u003c\/strong\u003e DJI Agras T50. Confirm the component variant against your aircraft's parts diagram before installation.\u003c\/p\u003e\n\u003chr\u003e","brand":"Ares Acres","offers":[{"title":"Default Title","offer_id":53090234925376,"sku":"ARES-T50-SHELL-REFRESH-03","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/6FA9C331-3C95-473D-8A7C-801525B15E1E.jpg?v=1788275631","url":"https:\/\/aresacres.com\/products\/dji-agras-t50-oem-shell-cover-refresh-kit","provider":"Ares Acres","version":"1.0","type":"link"}