{"product_id":"dji-agras-t50-t40-propeller-screw-kit-32-screws-replenishment-monthly-program","title":"DJI Agras T50 – T40 Propeller Screw Kit (32 Screws) Replenishment (Monthly Program)","description":"\u003cp\u003e\u003cstrong\u003eDJI Agras T50 – T40 Propeller Screw Kit | 32 Rotor Retention Fasteners — Full-Aircraft Refresh | Genuine DJI OEM Hardware | Monthly Replenishment Program\u003cbr\u003e\u003cbr\u003e$12.99\/month\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers, every cycle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePropeller screws are torque-cycled at every prop change, and best practice on a working Agras is fresh fasteners with every swap — a screw that has been torqued, vibrated for a hundred flight hours, and backed out again is not the screw it was. Thread-locker residue, stretched threads, and worn heads accumulate quietly, and rotor retention hardware is the last place on the aircraft to discover that.\u003c\/p\u003e\n\u003cp\u003eThis program ships one genuine DJI OEM 32-screw propeller fastener kit automatically every month. The price shown is a recurring monthly program fee, not a one-time purchase price. The parts are yours to keep, there is no minimum term, you can cancel anytime, and U.S. shipping is free every cycle.\u003c\/p\u003e\n\u003cp\u003eCompared with the one-time kit at $39.99 bought reactively, monthly replenishment at $12.99 keeps fresh retention hardware always within reach — and pairs naturally with a quarterly propeller replacement schedule.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/buy.stripe.com\/28E3cv1Iu2U32CNgBreo00M\"\u003eEnroll now — $12.99\/mo, cancel anytime\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe use specialized technicians to verify and dispatch the Propeller Screw Kit Replenishment ordered.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe use specialized technicians to verify and dispatch the – T40 Propeller Screw Kit (32 Screws) Replenishment ordered.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.\u003c\/p\u003e\n\u003cp\u003eThat is why Ares Acres keeps the propellers operators actually run out of in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.\u003c\/p\u003e\n\u003cp\u003eFor professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T50 \/ DJI Agras T40, this is the part that keeps a scheduled job on the calendar instead of on hold.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T50 \/ T40 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e32 × Genuine DJI Agras OEM Propeller Retention Screws (full-aircraft refresh set), shipped automatically every month\u003c\/li\u003e\n\u003cli\u003eFresh fasteners every cycle — the parts are yours to keep, no return required\u003c\/li\u003e\n\u003cli\u003eRecurring monthly program fee of $12.99 — not a one-time purchase price\u003c\/li\u003e\n\u003cli\u003eNo minimum term — cancel anytime and future shipments simply stop\u003c\/li\u003e\n\u003cli\u003eFREE \u0026amp; FAST U.S. shipping on every monthly shipment\u003c\/li\u003e\n\u003cli\u003eEnrollment via secure Stripe checkout: \u003cstrong\u003e\u003ca href=\"https:\/\/buy.stripe.com\/28E3cv1Iu2U32CNgBreo00M\"\u003eEnroll now — $12.99\/mo, cancel anytime\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003ePropeller Screw Kit\u003c\/strong\u003e is the genuine DJI OEM rotor retention fastener set for the DJI Agras T50 and T40 propulsion system — 32 screws, enough to refresh every propeller mounting position on the aircraft.\u003c\/p\u003e\n\u003cp\u003eThe screws serve to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRetain propellers against full propulsion loads\u003c\/li\u003e\n\u003cli\u003eHold clamp torque through vibration and heat cycles\u003c\/li\u003e\n\u003cli\u003eKeep prop seating square for balanced thrust\u003c\/li\u003e\n\u003cli\u003eProvide fresh threads and heads at every prop change\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThroughout commercial duty, propeller screws are routinely exposed to repeated torque cycles at prop changes, continuous rotor vibration, thread-locker residue accumulation, dust and chemical exposure at the mounting point, and driver wear on the head. Fastener fatigue is invisible until it is not — which is exactly why fresh hardware on schedule is the standard.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe program helps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep fresh retention fasteners always on hand\u003c\/li\u003e\n\u003cli\u003eFit new screws at every propeller change\u003c\/li\u003e\n\u003cli\u003eRetire torque-cycled screws before threads or heads fail\u003c\/li\u003e\n\u003cli\u003eHold clamp torque consistent across all positions\u003c\/li\u003e\n\u003cli\u003eKeep rotor retention hardware off the risk list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReused, fatigued screws may contribute to: clamp torque loss under vibration, prop seating shift, thread stripping at the worst possible time, and rounded heads that turn a five-minute prop change into an extraction job.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA propeller change or refresh is being performed\u003c\/li\u003e\n\u003cli\u003eThread-locker residue visible on removed screws\u003c\/li\u003e\n\u003cli\u003eRounded or worn driver engagement on heads\u003c\/li\u003e\n\u003cli\u003eScrews that take torque inconsistently\u003c\/li\u003e\n\u003cli\u003eScrews dropped or lost during a field prop swap\u003c\/li\u003e\n\u003cli\u003eHigh-hour aircraft on daily commercial duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Propeller retention screw kit \/ rotor mounting hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T50\u003c\/li\u003e\n\u003cli\u003eDJI Agras T40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Propellers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 32 screws per monthly shipment (full-aircraft refresh)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Propeller mounting positions, all propulsion arms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new genuine DJI OEM hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgram Structure:\u003c\/strong\u003e Recurring monthly fee of $12.99, not a one-time purchase price. One 32-screw kit ships automatically every month; no minimum term; cancel anytime; parts are yours to keep; free U.S. shipping every cycle.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧰 Fitment Verification Before You Order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm fitment by part number before ordering.\u003c\/strong\u003e Find the code printed on the component you are replacing, or look it up on the DJI Agras parts diagram for your airframe, and compare it against this listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRevision suffixes are still the same part.\u003c\/strong\u003e DJI labels sometimes carry a trailing revision such as \u003cem\u003e.01\u003c\/em\u003e, \u003cem\u003e.02\u003c\/em\u003e, or \u003cem\u003e.F\u003c\/em\u003e. Those denote a production revision, not a different component. Match the base number and disregard the suffix.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisually similar is not the same.\u003c\/strong\u003e DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerified fitment for this listing:\u003c\/strong\u003e DJI Agras T50 \/ DJI Agras T40. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure?\u003c\/strong\u003e Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Handling Notes\u003c\/h2\u003e\n\u003cp\u003eThese are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower down completely and disconnect the flight batteries\u003c\/strong\u003e before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhotograph the assembly before you disturb it.\u003c\/strong\u003e Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the – T40 Propeller Screw Kit (32 Screws) Replenishment is easier to fit correctly when you can see how the original sat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque to DJI specification.\u003c\/strong\u003e Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the mating surfaces and seals while you are in there.\u003c\/strong\u003e A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest before you spray.\u003c\/strong\u003e Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.\u003c\/p\u003e\n\u003cp\u003eIf the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis program is ideal for: DJI Agras T50 and T40 operators; farmers operating spray drones; commercial spraying contractors; aerial applicators; fleet maintenance managers; operators on a scheduled propeller replacement program; and professional agricultural drone technicians. Especially valuable during peak-season high-hour operation and multi-aircraft fleet maintenance cycles.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003ePropellers get all the attention; the screws holding them on get none — until one strips, rounds off, or backs out. Fresh OEM fasteners arriving monthly make new-screws-every-swap the default instead of the exception, which is precisely how rotor retention should be treated on a machine that works for a living.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtect the screw. Protect the prop. Protect the mission. Protect the season.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T50 – T40 Propeller Screw Kit (32 Screws) Replenishment (Monthly Program)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Propeller Screw Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct category:\u003c\/strong\u003e Propellers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Agras T50, DJI Agras T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Propeller mounting positions on all propulsion arms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgram type:\u003c\/strong\u003e Monthly replenishment subscription — one genuine DJI OEM 32-screw kit ships automatically every month; parts are kept by the customer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras reseller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free and fast U.S. shipping every cycle; same-day dispatch and tracking on in-stock parts\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚚 Shipping, Returns \u0026amp; Support\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFree and fast shipping within the United States\u003c\/strong\u003e on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship from the U.S., not from overseas.\u003c\/strong\u003e That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew condition, correctly described.\u003c\/strong\u003e We describe what we ship and we do not overstate it. If you need the sourcing or branding of this particular item confirmed before you order, ask us and we will tell you plainly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdered the wrong part?\u003c\/strong\u003e Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed help identifying a part?\u003c\/strong\u003e Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFleet and dealer volume:\u003c\/strong\u003e operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Propeller Screw Kit?\u003c\/strong\u003e The genuine DJI OEM 32-screw rotor retention fastener set for the DJI Agras T50 and T40 — a full-aircraft refresh of the hardware that holds the propellers on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the monthly program work?\u003c\/strong\u003e The price shown is a recurring monthly program fee of $12.99, not a one-time purchase price. One genuine DJI OEM 32-screw kit ships automatically every month with free U.S. shipping. No minimum term, cancel anytime, and the parts are yours to keep. Enrollment is through secure Stripe checkout: \u003ca href=\"https:\/\/buy.stripe.com\/28E3cv1Iu2U32CNgBreo00M\"\u003eEnroll now — $12.99\/mo, cancel anytime\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy subscribe instead of buying one-time?\u003c\/strong\u003e Because best practice is fresh fasteners at every propeller change, and on a working aircraft those changes come on a schedule. At $12.99\/month the hardware shows up on its own, versus $39.99 one-time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my aircraft?\u003c\/strong\u003e This kit is supplied for the DJI Agras T50 and T40. If your airframe is not listed, message us with your model and serial before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my aircraft?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis part is supplied for the DJI Agras T50 \/ DJI Agras T40. Confirm against your model's DJI Agras parts diagram before ordering. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow fast does it ship, and where does it ship from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install the – T40 Propeller Screw Kit (32 Screws) Replenishment myself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMany operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I order the wrong part?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you stock other parts for this aircraft?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T50\u003c\/p\u003e\n\u003cp\u003eDJI Agras T50 Parts\u003c\/p\u003e\n\u003cp\u003eDJI T50 Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T50 OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T50 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T50 parts USA\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 Parts\u003c\/p\u003e\n\u003cp\u003eDJI T40 Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T40 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T40 parts USA\u003c\/p\u003e\n\u003cp\u003eDJI Agras – T40 Propeller Screw Kit (32 Screws) Replenishment\u003c\/p\u003e\n\u003cp\u003e– t40 propeller screw kit (32 screws) replenishment replacement\u003c\/p\u003e\n\u003cp\u003e– t40 propeller screw kit (32 screws) replenishment for sale\u003c\/p\u003e\n\u003cp\u003eDJI – T40 Propeller Screw Kit (32 Screws) Replenishment\u003c\/p\u003e\n\u003cp\u003eT50 – T40 Propeller Screw Kit (32 Screws) Replenishment\u003c\/p\u003e\n\u003cp\u003eDJI T50 – T40 Propeller Screw Kit (32 Screws) Replenishment\u003c\/p\u003e\n\u003cp\u003eT40 – T40 Propeller Screw Kit (32 Screws) Replenishment\u003c\/p\u003e\n\u003cp\u003eDJI T40 – T40 Propeller Screw Kit (32 Screws) Replenishment\u003c\/p\u003e\n\u003cp\u003ePropellers\u003c\/p\u003e\n\u003cp\u003eDJI Agras Propellers\u003c\/p\u003e\n\u003cp\u003eT50 Propellers\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Replacement Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Repair Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Maintenance Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agricultural Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agriculture Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Spray Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Crop Sprayer Parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts\u003c\/p\u003e\n\u003cp\u003espray drone parts\u003c\/p\u003e\n\u003cp\u003eag drone parts USA\u003c\/p\u003e\n\u003cp\u003eplant protection drone parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras reseller\u003c\/p\u003e\n\u003cp\u003eDJI Agras dealer USA\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras parts online\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts free shipping\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003chr\u003e\n","brand":"Ares Acres","offers":[{"title":"Monthly Program","offer_id":53032765849920,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/2F67BD39-69BC-4C20-80B3-13F99D1CAB59.png?v=1782037819","url":"https:\/\/aresacres.com\/products\/dji-agras-t50-t40-propeller-screw-kit-32-screws-replenishment-monthly-program","provider":"Ares Acres","version":"1.0","type":"link"}