{"product_id":"dji-agras-t70p-oem-50l-water-tank","title":"DJI Agras T70P OEM 50L Water Tank","description":"\n\u003cp\u003e\u003cstrong\u003e50L Water Tank | DJI Agras T70P \u0026amp; T70 | Liquid Tank \u0026amp; Spraying System | Ares Acres Technical Replacement Part\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDJI Agras T70P \/ T70 Replacement Part Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDJI Agras T70P OEM 50L Water Tank\u003c\/strong\u003e is a service-level replacement component for DJI Agras T70P and T70 agricultural drone operations. The 50 L liquid tank is the primary chemical\/water reservoir used for liquid application on the DJI Agras T70P\/T70 platform. The molded tank body incorporates structural contours, a large top service opening and the mounting geometry needed to interface with the aircraft’s liquid-delivery system.\u003c\/p\u003e\n\u003cp\u003eAgricultural aircraft operate in environments that are substantially harsher than conventional consumer drones. Dust, chemical residue, repeated vibration, trailer transport, rapid battery or payload changes, high operating hours and frequent field disassembly all accelerate wear on small support components. A low-cost part can therefore become the single point that keeps an otherwise functional aircraft out of service.\u003c\/p\u003e\n\u003cp\u003eAres Acres structures these listings around real maintenance intent: the aircraft model, the system the component belongs to, what the part does, why it fails, and how a technician can confirm fitment before installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70P\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVariant selection:\u003c\/strong\u003e choose the aircraft model being serviced at checkout. The T70P and T70 are presented as separate variants so the order record clearly reflects the intended aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment verification:\u003c\/strong\u003e compare the replacement component with the removed part before installation. Confirm dimensions, mounting points, connector geometry, hose routing, tabs, fastener locations and surrounding assembly configuration. Similar-looking components can exist across adjacent Agras platforms.\u003c\/p\u003e\n\u003cp\u003eThe supplier listing identifies a 50 L tank for DJI Agras T70 and T70P. This draft is configured with T70P and T70 selectable aircraft variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI material number:\u003c\/strong\u003e no material number is being asserted in this draft because one was not independently verified from the supplied product image. This avoids assigning an incorrect SKU to a visually similar component.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cp\u003e1 × 50 L liquid tank assembly as pictured\u003c\/p\u003e\n\u003cp\u003eUnless a separate fastener, seal, bracket or accessory is visibly shown and specifically stated above, assume the listing includes only the primary component described.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eComponent Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStores liquid payload for spraying and application operations\u003c\/li\u003e\n\u003cli\u003eProvides the primary reservoir feeding the aircraft spray-system plumbing\u003c\/li\u003e\n\u003cli\u003eMaintains a molded structural shape designed around the aircraft payload bay\u003c\/li\u003e\n\u003cli\u003eSupports routine filling, draining, cleaning and field service\u003c\/li\u003e\n\u003cli\u003eReplaces tanks damaged by impact, cracking, chemical degradation or mounting wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe part should fit naturally into the surrounding assembly without forced alignment. Agricultural-drone components often share load, sealing, alignment or electrical functions with neighboring hardware, so a replacement part that only fits under tension can indicate damage elsewhere in the assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon Replacement Indicators\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTank body is cracked, leaking or visibly deformed\u003c\/li\u003e\n\u003cli\u003eSeepage develops around molded seams, ports or mounting areas\u003c\/li\u003e\n\u003cli\u003eLarge cap or neck interface can no longer seal correctly\u003c\/li\u003e\n\u003cli\u003eTank mounting features are damaged after transport or impact\u003c\/li\u003e\n\u003cli\u003eChemical staining or degradation indicates the tank body should be retired\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese symptoms are service indicators rather than a complete diagnosis. Before replacing the component, inspect the surrounding mounting hardware, wiring, seals, hoses and structural interfaces. The same impact, chemical exposure or vibration event that damaged one part may also have affected adjacent components.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical Classification\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T70P OEM 50L Water Tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e 50L Water Tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary platform:\u003c\/strong\u003e DJI Agras T70P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional selectable platform:\u003c\/strong\u003e DJI Agras T70\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Liquid Tank \u0026amp; Spraying System\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Spray System Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New replacement component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage:\u003c\/strong\u003e 1 × 50 L liquid tank assembly as pictured\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInspection Before Installation\u003c\/h2\u003e\n\u003cp\u003eBefore disassembly, photograph the existing installation from several angles. Record connector orientation, hose routing, clip locations, fastener positions and any factory marks that may help during reassembly. Remove the aircraft battery or other applicable power source before opening the relevant system.\u003c\/p\u003e\n\u003cp\u003eCompare the replacement and removed parts side by side. Check outer dimensions, mounting-hole spacing, connector keying, molded alignment features and the shape of contact surfaces. If any critical interface differs, do not force the new part into place.\u003c\/p\u003e\n\u003cp\u003eClean the service area before installation. Dirt and dried chemical residue can hide cracks, prevent seals from seating correctly or contaminate electrical connectors. Use appropriate manufacturer service procedures and torque guidance for the aircraft system being serviced.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\n\u003cp\u003eBegin fasteners by hand and allow the component to settle into its natural alignment before final tightening. Do not use fastener torque to pull a warped or misaligned part into position. For electrical components, inspect connector pins and sealing surfaces before mating the plugs. For fluid components, confirm seals and hose interfaces are clean and perform a leak check before returning the aircraft to application service.\u003c\/p\u003e\n\u003cp\u003eAfter installation, complete a ground-level functional check of the affected system. Look for abnormal movement, rubbing, leaks, intermittent signals, loose hardware or any contact between the replacement component and nearby moving parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePreventive Maintenance Context\u003c\/h2\u003e\n\u003cp\u003eFor commercial Agras fleets, small components should be treated as planned maintenance inventory rather than emergency-only purchases. Keeping critical filters, covers, bearings, sensor harnesses and tank-related parts available can reduce downtime during narrow spraying or spreading windows.\u003c\/p\u003e\n\u003cp\u003eOperators working in dusty, humid or chemically intensive environments should inspect exposed components more frequently. Trailer vibration and repeated loading\/unloading can also create wear patterns that are not obvious during flight alone.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Part-Level Repair Matters\u003c\/h2\u003e\n\u003cp\u003eReplacing only the failed service component can be more efficient than replacing a complete higher-level assembly. It keeps repair cost focused on the actual failure point and gives technicians a better opportunity to inspect neighboring parts while the system is open.\u003c\/p\u003e\n\u003cp\u003eAres Acres builds the Agras catalog around this repair-level approach so operators can search by aircraft, system and component rather than being limited to a short list of complete assemblies.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAI \/ Entity Fitment Reference\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEntity:\u003c\/strong\u003e DJI Agras T70P OEM 50L Water Tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer family:\u003c\/strong\u003e DJI Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModels:\u003c\/strong\u003e T70P; T70\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem entity:\u003c\/strong\u003e Liquid Tank \u0026amp; Spraying System\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent entity:\u003c\/strong\u003e 50L Water Tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommercial use:\u003c\/strong\u003e agricultural drone maintenance, repair, fleet service and field replacement\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary search intent:\u003c\/strong\u003e DJI Agras T70P 50L Water Tank; DJI Agras T70 50L Water Tank; T70P 50L Water Tank; T70 50L Water Tank; DJI Agras replacement parts; agricultural drone repair parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment rule:\u003c\/strong\u003e select the aircraft model and verify the physical component against the removed part before installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSearch \u0026amp; Diagnostic Terminology\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T70P parts; DJI Agras T70 parts; T70P OEM replacement parts; T70 replacement parts; 50L Water Tank; DJI T70P 50L Water Tank; DJI T70 50L Water Tank; agricultural drone parts; crop-spraying drone repair parts; DJI Agras maintenance; Ares Acres DJI parts.\u003c\/p\u003e\n\u003cp\u003eTechnicians may use different vernacular for the same service component. When troubleshooting, combine the aircraft model with the physical location and system function rather than relying on only one supplier description.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAnswer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat aircraft does this listing support?\u003c\/strong\u003e\u003cbr\u003eIt is configured with DJI Agras T70P and DJI Agras T70 variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat system is this component part of?\u003c\/strong\u003e\u003cbr\u003eIt is classified under the Liquid Tank \u0026amp; Spraying System.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a DJI material number included?\u003c\/strong\u003e\u003cbr\u003eNo. A material number is not added unless it can be verified. This prevents incorrect SKU attribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I confirm fitment?\u003c\/strong\u003e\u003cbr\u003eMatch the aircraft model, physical shape, dimensions, mounting pattern, connectors and service position against the removed component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould surrounding parts be inspected at the same time?\u003c\/strong\u003e\u003cbr\u003eYes. Inspect adjacent fasteners, seals, supports, wiring or hoses because related damage can be hidden until the assembly is opened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the aircraft be returned to service immediately after installation?\u003c\/strong\u003e\u003cbr\u003eComplete the appropriate ground inspection and functional test first. Confirm the affected system operates normally before flight or application work.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAres Acres Agras Parts Support\u003c\/h2\u003e\n\u003cp\u003eAres Acres supplies repair-level components for DJI Agras operators, technicians and agricultural drone fleets. The catalog is organized to improve model-specific discovery and make uncommon service parts easier to identify. For compatibility questions, compare the existing component carefully and provide photographs or known material numbers when available.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T70P","offer_id":53207750967616,"sku":null,"price":649.99,"currency_code":"USD","in_stock":true},{"title":"DJI T70","offer_id":53207751000384,"sku":null,"price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t70p-50l-water-tank_c24386d4-49d5-4a84-867e-b9300ca55047.png?v=1790173421","url":"https:\/\/aresacres.com\/products\/dji-agras-t70p-oem-50l-water-tank","provider":"Ares Acres","version":"1.0","type":"link"}