{"product_id":"dji-agras-t70p-oem-auger-motor-base","title":"DJI Agras T70P OEM Auger Motor Base","description":"\n\u003cp\u003e\u003cstrong\u003eAuger Motor Base | DJI Agras T70P \u0026amp; T70 | Spreading \u0026amp; Auger System | Technical Replacement Part\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDJI Agras T70P \/ T70 Replacement Part Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDJI Agras T70P OEM Auger Motor Base\u003c\/strong\u003e is a service-level replacement component for DJI Agras T70P and DJI Agras T70 agricultural drone operations. It is intended for technicians, applicators, farms and fleet operators who need to repair the specific failed component rather than replace a complete higher-level assembly.\u003c\/p\u003e\n\u003cp\u003eAgricultural drones operate under sustained vibration, dust, humidity, chemical residue, repeated transport, field loading and frequent disassembly. Those conditions make small covers, brackets, cables, valves, ignition components, structural tubes and electronics important maintenance items. A low-cost support part can become the reason an otherwise serviceable aircraft or charging system remains grounded.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70P\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVariant selection:\u003c\/strong\u003e choose the aircraft model being serviced at checkout. The T70P and T70 are maintained as separate variants so the order record clearly reflects intended fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment verification:\u003c\/strong\u003e compare the replacement against the removed component before installation. Confirm overall dimensions, mounting points, connector keying, hose interfaces, thread type, orientation and adjoining assembly geometry. Similar-looking components can be used on adjacent Agras generations, so visual similarity alone should not be treated as final fitment confirmation.\u003c\/p\u003e\n\u003cp\u003eThe supplier listing also references T100 compatibility. This draft is configured for T70P and T70 variants only until T100 fitment is independently verified.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cp\u003e1 × auger motor base\u003c\/p\u003e\n\u003cp\u003eUnless another item is specifically listed above, surrounding aircraft assemblies, tools, fasteners, hoses, motors, tanks, spreaders or generators shown only for reference are not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eComponent Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports the auger motor at its intended mounting position within the spreading system\u003c\/li\u003e\n\u003cli\u003eMaintains motor alignment relative to the auger or feed mechanism\u003c\/li\u003e\n\u003cli\u003eProvides the structural base around the motor interface\u003c\/li\u003e\n\u003cli\u003eRestores damaged mounting geometry after impact or wear\u003c\/li\u003e\n\u003cli\u003eAllows component-level spreading-system repair without replacing the entire module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe component should install naturally into the intended service position. Do not use fastener torque, excessive force or improvised modification to make a mismatched part fit. If alignment is significantly different from the removed component, inspect the surrounding structure before continuing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon Replacement Indicators\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMotor base is cracked or warped\u003c\/li\u003e\n\u003cli\u003eAuger motor develops movement at its mounting point\u003c\/li\u003e\n\u003cli\u003eMounting ears or holes are damaged\u003c\/li\u003e\n\u003cli\u003eFeed mechanism alignment changes during operation\u003c\/li\u003e\n\u003cli\u003eOriginal base is damaged during spreader service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese indicators help narrow the repair but do not replace a complete diagnosis. Inspect neighboring fasteners, wiring, seals, supports, bearings, hoses and mounting surfaces while the system is open. Damage from impact, contamination or vibration can affect more than the visibly failed piece.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical Classification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAuger Motor Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrimary model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDJI Agras T70P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdditional configured model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDJI Agras T70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpreading \u0026amp; Auger System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpreading System Parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNew replacement component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × auger motor base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot independently verified from supplied source material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003chr\u003e\n\u003ch2\u003eInspection Before Installation\u003c\/h2\u003e\n\u003cp\u003ePower the aircraft or associated support equipment down fully before service. Remove the flight battery or disconnect the applicable power source where appropriate. Photograph the original component and its routing, orientation and surrounding hardware before disassembly so the installation can be reconstructed accurately.\u003c\/p\u003e\n\u003cp\u003eCompare the replacement directly with the removed part. Inspect all molded tabs, holes, threads, connectors, fluid ports, sealing surfaces and contact points. Clean dust and chemical residue from the service area before installation because contamination can hide cracks or interfere with seals and electrical contacts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; Service Guidance\u003c\/h2\u003e\n\u003cp\u003eStart fasteners by hand and allow the component to settle into its intended position before final tightening. Electrical connectors should seat positively without excessive force, and fluid fittings should be inspected for clean sealing surfaces before reassembly. For propulsion and structural hardware, verify that no moving component rubs or binds after installation.\u003c\/p\u003e\n\u003cp\u003eAfter installation, complete the appropriate ground-level inspection for the affected system. Confirm there are no leaks, loose fasteners, pinched wires, abnormal movement, exposed electronics or new fault messages before returning the aircraft or support equipment to normal operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePreventive Maintenance \u0026amp; Fleet Use\u003c\/h2\u003e\n\u003cp\u003eCommercial Agras fleets benefit from carrying repair-level spares for parts that are frequently handled, exposed to contamination or vulnerable to impact. Stocking individual components can reduce downtime during narrow spraying or spreading windows and can prevent a minor service issue from forcing replacement of a more expensive complete assembly.\u003c\/p\u003e\n\u003cp\u003eInspection frequency should increase in dusty, humid, chemically intensive or high-hour operations. Trailer vibration, repeated washing, loading\/unloading and rapid field servicing can create wear patterns that are not always obvious during flight alone.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDiagnostic Context\u003c\/h2\u003e\n\u003cp\u003eBefore replacing a part, verify that the visible condition explains the reported symptom. A physically cracked cover or bracket is usually straightforward, while electrical, fluid or ignition symptoms may require checking upstream and downstream components as well. A wiring issue can mimic a sensor fault, a plumbing restriction can mimic a flow component fault, and structural looseness can create secondary vibration elsewhere in the aircraft.\u003c\/p\u003e\n\u003cp\u003eIf the failure followed an impact, inspect the complete local load path. If it appeared gradually, look for contamination, corrosion, abrasion, chemical attack, loosened hardware or repeated mechanical wear that may have contributed to the failure.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T70P OEM Auger Motor Base\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent entity:\u003c\/strong\u003e Auger Motor Base\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand family:\u003c\/strong\u003e DJI Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T70P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional configured aircraft:\u003c\/strong\u003e DJI Agras T70\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem entity:\u003c\/strong\u003e Spreading \u0026amp; Auger System\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct classification:\u003c\/strong\u003e Spreading System Parts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New replacement component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number status:\u003c\/strong\u003e Not independently verified\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSearch intent:\u003c\/strong\u003e DJI Agras T70P Auger Motor Base; DJI Agras T70 Auger Motor Base; T70P Auger Motor Base; T70 replacement part; DJI Agras repair part; agricultural drone maintenance part\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSearch Terminology \u0026amp; Alternate Queries\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T70P parts; DJI Agras T70 parts; DJI T70P OEM parts; DJI T70 replacement parts; Auger Motor Base; T70P Auger Motor Base; T70 Auger Motor Base; agricultural drone repair parts; crop spraying drone parts; Agras service parts; DJI agricultural drone maintenance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat models does this listing support?\u003c\/h3\u003e\n\u003cp\u003eThis product is configured with selectable variants for DJI Agras T70P and DJI Agras T70.\u003c\/p\u003e\n\u003ch3\u003eHow should I confirm fitment?\u003c\/h3\u003e\n\u003cp\u003eCompare the replacement directly with the original component and verify the mounting position, dimensions, connector or hose geometry and surrounding assembly before installation.\u003c\/p\u003e\n\u003ch3\u003eDoes the listing include a DJI material number?\u003c\/h3\u003e\n\u003cp\u003eNo verified DJI material number is being claimed from the supplied source. The listing avoids inventing or guessing a part number.\u003c\/p\u003e\n\u003ch3\u003eWhen should this part be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace it when inspection confirms damage, excessive wear, leakage, electrical failure, structural deformation, loss of retention or another condition that prevents the component from performing its intended function.\u003c\/p\u003e\n\u003ch3\u003eWhat else should be inspected during the repair?\u003c\/h3\u003e\n\u003cp\u003eInspect adjacent hardware, seals, wiring, hoses, mounting bosses and structural supports while the assembly is accessible. Repairing the root cause helps prevent repeat failure.\u003c\/p\u003e\n\u003ch3\u003eCan this be kept as a field spare?\u003c\/h3\u003e\n\u003cp\u003eYes. Repair-level components can be valuable fleet inventory when seasonal downtime is more costly than carrying a targeted selection of replacement parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommercial Operator Note\u003c\/h2\u003e\n\u003cp\u003eComplete the manufacturer-recommended inspection, calibration or functional check for the affected system before returning the aircraft or support equipment to operation. A replacement component should be treated as one step in a complete maintenance process that includes diagnosis, installation inspection and post-repair testing.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T70P","offer_id":53208156864832,"sku":null,"price":184.99,"currency_code":"USD","in_stock":true},{"title":"DJI T70","offer_id":53208156897600,"sku":null,"price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t70p-auger-motor-base.png?v=1790179646","url":"https:\/\/aresacres.com\/products\/dji-agras-t70p-oem-auger-motor-base","provider":"Ares Acres","version":"1.0","type":"link"}