{"product_id":"dji-agras-t70p-oem-propeller-clamp","title":"DJI Agras T70P OEM Propeller Clamp","description":"\n\u003cp\u003e\u003cstrong\u003ePropeller Clamp | DJI Agras T70P \u0026amp; T70 | Propulsion \u0026amp; Propeller Hardware | Technical Replacement Part\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDJI Agras T70P \/ T70 Replacement Part Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDJI Agras T70P OEM Propeller Clamp\u003c\/strong\u003e is a service-level replacement component for DJI Agras T70P and DJI Agras T70 agricultural drone operations. It is intended for technicians, applicators, farms and fleet operators who need to repair the specific failed component rather than replace a complete higher-level assembly.\u003c\/p\u003e\n\u003cp\u003eAgricultural drones operate under sustained vibration, dust, humidity, chemical residue, repeated transport, field loading and frequent disassembly. Those conditions make small covers, brackets, cables, valves, ignition components, structural tubes and electronics important maintenance items. A low-cost support part can become the reason an otherwise serviceable aircraft or charging system remains grounded.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70P\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDJI Agras T70\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVariant selection:\u003c\/strong\u003e choose the aircraft model being serviced at checkout. The T70P and T70 are maintained as separate variants so the order record clearly reflects intended fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment verification:\u003c\/strong\u003e compare the replacement against the removed component before installation. Confirm overall dimensions, mounting points, connector keying, hose interfaces, thread type, orientation and adjoining assembly geometry. Similar-looking components can be used on adjacent Agras generations, so visual similarity alone should not be treated as final fitment confirmation.\u003c\/p\u003e\n\u003cp\u003eThe supplier listing identifies this propeller clamp for DJI Agras T70 and T70P and shows supplier reference 004522.09. That reference is not being asserted as a verified DJI material number in this draft.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cp\u003e1 × propeller clamp \/ propeller clip assembly\u003c\/p\u003e\n\u003cp\u003eUnless another item is specifically listed above, surrounding aircraft assemblies, tools, fasteners, hoses, motors, tanks, spreaders or generators shown only for reference are not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eComponent Function\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSecures propeller-related hardware at the designed retention points\u003c\/li\u003e\n\u003cli\u003eMaintains the geometry of the clamp interface during operation\u003c\/li\u003e\n\u003cli\u003eProvides a structural replacement for cracked or worn propeller-retention hardware\u003c\/li\u003e\n\u003cli\u003eSupports correct propeller service and reassembly\u003c\/li\u003e\n\u003cli\u003eReduces the need to replace larger propulsion assemblies when the clamp itself is damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe component should install naturally into the intended service position. Do not use fastener torque, excessive force or improvised modification to make a mismatched part fit. If alignment is significantly different from the removed component, inspect the surrounding structure before continuing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon Replacement Indicators\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClamp is cracked or visibly deformed\u003c\/li\u003e\n\u003cli\u003eRetention points no longer hold correctly\u003c\/li\u003e\n\u003cli\u003eExcessive play is present at the propeller-clamp interface\u003c\/li\u003e\n\u003cli\u003eMounting holes are damaged\u003c\/li\u003e\n\u003cli\u003eClamp has suffered impact or repeated-service wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese indicators help narrow the repair but do not replace a complete diagnosis. Inspect neighboring fasteners, wiring, seals, supports, bearings, hoses and mounting surfaces while the system is open. Damage from impact, contamination or vibration can affect more than the visibly failed piece.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical Classification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePropeller Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrimary model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDJI Agras T70P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdditional configured model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDJI Agras T70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePropulsion \u0026amp; Propeller Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePropulsion Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNew replacement component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × propeller clamp \/ propeller clip assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot independently verified from supplied source material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003chr\u003e\n\u003ch2\u003eInspection Before Installation\u003c\/h2\u003e\n\u003cp\u003ePower the aircraft or associated support equipment down fully before service. Remove the flight battery or disconnect the applicable power source where appropriate. Photograph the original component and its routing, orientation and surrounding hardware before disassembly so the installation can be reconstructed accurately.\u003c\/p\u003e\n\u003cp\u003eCompare the replacement directly with the removed part. Inspect all molded tabs, holes, threads, connectors, fluid ports, sealing surfaces and contact points. Clean dust and chemical residue from the service area before installation because contamination can hide cracks or interfere with seals and electrical contacts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; Service Guidance\u003c\/h2\u003e\n\u003cp\u003eStart fasteners by hand and allow the component to settle into its intended position before final tightening. Electrical connectors should seat positively without excessive force, and fluid fittings should be inspected for clean sealing surfaces before reassembly. For propulsion and structural hardware, verify that no moving component rubs or binds after installation.\u003c\/p\u003e\n\u003cp\u003eAfter installation, complete the appropriate ground-level inspection for the affected system. Confirm there are no leaks, loose fasteners, pinched wires, abnormal movement, exposed electronics or new fault messages before returning the aircraft or support equipment to normal operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePreventive Maintenance \u0026amp; Fleet Use\u003c\/h2\u003e\n\u003cp\u003eCommercial Agras fleets benefit from carrying repair-level spares for parts that are frequently handled, exposed to contamination or vulnerable to impact. Stocking individual components can reduce downtime during narrow spraying or spreading windows and can prevent a minor service issue from forcing replacement of a more expensive complete assembly.\u003c\/p\u003e\n\u003cp\u003eInspection frequency should increase in dusty, humid, chemically intensive or high-hour operations. Trailer vibration, repeated washing, loading\/unloading and rapid field servicing can create wear patterns that are not always obvious during flight alone.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDiagnostic Context\u003c\/h2\u003e\n\u003cp\u003eBefore replacing a part, verify that the visible condition explains the reported symptom. A physically cracked cover or bracket is usually straightforward, while electrical, fluid or ignition symptoms may require checking upstream and downstream components as well. A wiring issue can mimic a sensor fault, a plumbing restriction can mimic a flow component fault, and structural looseness can create secondary vibration elsewhere in the aircraft.\u003c\/p\u003e\n\u003cp\u003eIf the failure followed an impact, inspect the complete local load path. If it appeared gradually, look for contamination, corrosion, abrasion, chemical attack, loosened hardware or repeated mechanical wear that may have contributed to the failure.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T70P OEM Propeller Clamp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent entity:\u003c\/strong\u003e Propeller Clamp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand family:\u003c\/strong\u003e DJI Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T70P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional configured aircraft:\u003c\/strong\u003e DJI Agras T70\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem entity:\u003c\/strong\u003e Propulsion \u0026amp; Propeller Hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct classification:\u003c\/strong\u003e Propulsion Hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New replacement component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number status:\u003c\/strong\u003e Not independently verified\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSearch intent:\u003c\/strong\u003e DJI Agras T70P Propeller Clamp; DJI Agras T70 Propeller Clamp; T70P Propeller Clamp; T70 replacement part; DJI Agras repair part; agricultural drone maintenance part\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSearch Terminology \u0026amp; Alternate Queries\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T70P parts; DJI Agras T70 parts; DJI T70P OEM parts; DJI T70 replacement parts; Propeller Clamp; T70P Propeller Clamp; T70 Propeller Clamp; agricultural drone repair parts; crop spraying drone parts; Agras service parts; DJI agricultural drone maintenance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat models does this listing support?\u003c\/h3\u003e\n\u003cp\u003eThis product is configured with selectable variants for DJI Agras T70P and DJI Agras T70.\u003c\/p\u003e\n\u003ch3\u003eHow should I confirm fitment?\u003c\/h3\u003e\n\u003cp\u003eCompare the replacement directly with the original component and verify the mounting position, dimensions, connector or hose geometry and surrounding assembly before installation.\u003c\/p\u003e\n\u003ch3\u003eDoes the listing include a DJI material number?\u003c\/h3\u003e\n\u003cp\u003eNo verified DJI material number is being claimed from the supplied source. The listing avoids inventing or guessing a part number.\u003c\/p\u003e\n\u003ch3\u003eWhen should this part be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace it when inspection confirms damage, excessive wear, leakage, electrical failure, structural deformation, loss of retention or another condition that prevents the component from performing its intended function.\u003c\/p\u003e\n\u003ch3\u003eWhat else should be inspected during the repair?\u003c\/h3\u003e\n\u003cp\u003eInspect adjacent hardware, seals, wiring, hoses, mounting bosses and structural supports while the assembly is accessible. Repairing the root cause helps prevent repeat failure.\u003c\/p\u003e\n\u003ch3\u003eCan this be kept as a field spare?\u003c\/h3\u003e\n\u003cp\u003eYes. Repair-level components can be valuable fleet inventory when seasonal downtime is more costly than carrying a targeted selection of replacement parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommercial Operator Note\u003c\/h2\u003e\n\u003cp\u003eComplete the manufacturer-recommended inspection, calibration or functional check for the affected system before returning the aircraft or support equipment to operation. A replacement component should be treated as one step in a complete maintenance process that includes diagnosis, installation inspection and post-repair testing.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T70P","offer_id":53208157225280,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true},{"title":"DJI T70","offer_id":53208157258048,"sku":null,"price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t70p-propeller-clamp.png?v=1790179657","url":"https:\/\/aresacres.com\/products\/dji-agras-t70p-oem-propeller-clamp","provider":"Ares Acres","version":"1.0","type":"link"}