{"product_id":"dji-talos-t60x-oem-cable-rubber-stopper","title":"DJI Talos T60X OEM Cable Rubber Stopper","description":"\u003cp\u003eThe DJI Talos T60X OEM Cable Rubber Stopper is the rubber stopper that closes the gap around a cable on the Talos T60X. It is a wiring-system seal: it carries no current and no signal, but where a cable passes through an opening it fills the space around the cable so that spray residue, dust and wash water stay on the outside. No product image of this part is available, so the match is made against the stopper you removed. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X cable stopper, cable grommet or cable rubber seal after the old one has split, been pushed out of its opening during a repair, or gone missing when a cable was replaced, and residue has started to appear on the wrong side of the opening it closed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched against the cable stopper you removed, from a photograph of the part and its position\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM wiring-system rubber stopper, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. With no published photograph for this part, a clear photograph of the old stopper, or of the opening and cable it sealed, is what the match is made from.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Cable Rubber Stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne stopper.\u003c\/strong\u003e The part is a single rubber stopper for one cable position. It is not a set of stoppers for every cable on the aircraft.\u003c\/p\u003e\n\u003cp\u003eNot included: the cable it seals around, the Connector Rubber Stopper, the Weight Sensor Rubber Cover, the Sealing Rings and any fixings. Those are separate parts or stay with the aircraft.\u003c\/p\u003e\n\u003cp\u003eNo product image of the cable rubber stopper is available. Nothing is described as included on the strength of an image.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eWherever a cable on a spray aircraft passes from one space to another, through a shell, a cover or a housing wall, there is a gap around it. Left open, that gap is a path for spray drift, residue and wash water into the space the cable came from. A cable rubber stopper closes it. The rubber fills the opening and grips the cable, so the cable passes through and the residue does not.\u003c\/p\u003e\n\u003cp\u003eThe name tells you what the part is and, just as usefully, what it is not. It is a stopper for a cable. It is not a stopper for a connector. The Connector Rubber Stopper on the Talos T60X is a different part: a tethered strap with a plug head or a hollow cap that closes an open connector when nothing is plugged into it. The cable rubber stopper seals around a cable that is in place and in use.\u003c\/p\u003e\n\u003cp\u003eA product image, a position and dimensions are not published for this part. That is not a gap to fill with guesses. The part you removed is the reference, and its shape, the size of the cable it gripped and the opening it sat in are what decide the match.\u003c\/p\u003e\n\u003cp\u003eWhat a cable rubber stopper lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray drift and residue settling on the outside of the opening it closes\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day, aimed at the shell around it\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system, which moves the cable inside it\u003c\/li\u003e\n\u003cli\u003eSunlight and heat on any part of it that faces outward\u003c\/li\u003e\n\u003cli\u003eBeing pushed, pulled or worked loose whenever the cable is disconnected or replaced\u003c\/li\u003e\n\u003cli\u003eRubber ageing in storage as well as in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is the rubber or a repair: a split that opens a path beside the cable, rubber that has hardened and no longer grips, a stopper pushed out of its opening during work on the cable, or one that was never refitted after a cable was replaced.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe cable rubber stopper's engineering role is to seal the gap around a cable where it passes through an opening. It does that in three ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilling\u003c\/strong\u003e — the rubber fills the opening around the cable so there is no clear path past it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGripping\u003c\/strong\u003e — the rubber holds against the cable and the edge of the opening so neither works loose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCushioning\u003c\/strong\u003e — the rubber sits between the cable and a hard edge, so vibration does not rub the cable sheath against it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe last of those is easy to overlook. Where a cable passes a hard edge with nothing between them, vibration rubs the sheath on every flight. A rubber stopper takes that contact instead, which is why a missing stopper can lead to a chafed cable as well as to residue getting in.\u003c\/p\u003e\n\u003cp\u003eWhat the cable rubber stopper does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not carry current or signal; the cable does\u003c\/li\u003e\n\u003cli\u003eIt does not close an open connector; that is the Connector Rubber Stopper\u003c\/li\u003e\n\u003cli\u003eIt does not protect a weight sensor; that is the Weight Sensor Rubber Cover\u003c\/li\u003e\n\u003cli\u003eIt does not seal a liquid joint in the spray system; those are the Sealing Rings\u003c\/li\u003e\n\u003cli\u003eIt does not repair a cable that has already been chafed through\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — decide whether the rubber sat around a cable or inside a connector\u003c\/h2\u003e\n\u003cp\u003eMost wrong orders for a part like this come from the word stopper. The Talos T60X has more than one rubber stopper, and the one you need is decided by where the old one sat, not by what it is called in conversation.\u003c\/p\u003e\n\u003cp\u003eThe test is simple. If the rubber you removed had a cable running through it and sat in an opening around that cable, it is a cable rubber stopper. If the rubber you removed was on a strap and pushed into or over a connector that had nothing plugged into it, it is a Connector Rubber Stopper. If it was a round cover over a weight sensor, it is the Weight Sensor Rubber Cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the old part was a cable stopper:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt had a cable passing through it, or a passage through it where a cable ran\u003c\/li\u003e\n\u003cli\u003eIt sat in an opening in a shell, cover or housing\u003c\/li\u003e\n\u003cli\u003eIt was not attached to a strap and did not close a connector\u003c\/li\u003e\n\u003cli\u003eIt sealed around a cable that stayed in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThen inspect it, or the opening it came from:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSplits or tears in the rubber, especially beside the cable passage\u003c\/li\u003e\n\u003cli\u003eRubber that has hardened, cracks when flexed or no longer grips\u003c\/li\u003e\n\u003cli\u003eResidue on the inside of the opening, which shows the stopper was letting material through\u003c\/li\u003e\n\u003cli\u003eRub marks on the cable sheath where it passes the opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point away from the cable stopper:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn open connector with nothing plugged in has collected residue — that is the Connector Rubber Stopper\u003c\/li\u003e\n\u003cli\u003eA liquid joint in the spray system is weeping — that is a sealing ring\u003c\/li\u003e\n\u003cli\u003eThe cable sheath is chafed through to the conductors — the cable needs attention, not only the stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhotograph the old stopper and its opening first, while that information is still cheap. With no published photograph for this part, that picture is what makes the match certain.\u003c\/p\u003e\n\u003cp\u003eA cable stopper that is split, hardened or missing should be replaced even if nothing has gone wrong yet. The cable and the space behind it are what it is protecting.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the cable rubber stopper when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA split or tear in the rubber, especially beside the cable passage\u003c\/li\u003e\n\u003cli\u003eRubber that has hardened, cracks when flexed or no longer springs back\u003c\/li\u003e\n\u003cli\u003eA stopper that has been pushed out of its opening and will not stay seated\u003c\/li\u003e\n\u003cli\u003eResidue or water found on the inside of the opening it closes\u003c\/li\u003e\n\u003cli\u003eRub marks on the cable sheath at the opening\u003c\/li\u003e\n\u003cli\u003eA stopper missing after a cable was replaced or a repair was made\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they are often affected together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe cable that passes through the stopper, for chafe or cuts in its sheath\u003c\/li\u003e\n\u003cli\u003eThe edge of the opening the stopper sits in, for cracks or sharp burrs\u003c\/li\u003e\n\u003cli\u003eThe space behind the opening, for residue that has already got in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the cable rubber stopper. It is replaced when it is damaged, hardened or missing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Cable Rubber Stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Wiring — cable protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Cable rubber stopper (seal around a cable)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e Not published for this part — no product image is available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber, as named in the part designation; compound not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable size:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the stopper carries no current or signal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Not published for this part; compare with the stopper you removed and the opening it sat in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fitted around its cable and seated in its opening by hand\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the part is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM wiring-system rubber stopper\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eConfirm the old part sat around a cable in an opening, not on a strap in a connector\u003c\/li\u003e\n\u003cli\u003ePhotograph the old stopper in place, showing the cable, the opening and which way the stopper faces\u003c\/li\u003e\n\u003cli\u003eRinse and dry the area around the opening\u003c\/li\u003e\n\u003cli\u003eCompare the new stopper with the old one before you start\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the cable at its connector if the stopper has to pass over it, holding the connector body, never the lead\u003c\/li\u003e\n\u003cli\u003eEase the old stopper out of its opening by hand; do not cut it free against the cable sheath\u003c\/li\u003e\n\u003cli\u003eInspect the cable sheath where it passed the opening and the edge of the opening itself\u003c\/li\u003e\n\u003cli\u003eClean and dry the inside of the opening if residue has got in\u003c\/li\u003e\n\u003cli\u003eFit the new stopper around the cable in the same orientation as the old one\u003c\/li\u003e\n\u003cli\u003eSeat it in the opening by hand until it sits evenly with no lifted edge, and leave the cable without a tight bend at the stopper\u003c\/li\u003e\n\u003cli\u003eReconnect the cable and confirm the connector is fully seated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the stopper stays seated when the cable is moved gently\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eCheck the opening from outside for any visible gap around the cable\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Whenever a cable is disconnected or replaced, check that its stopper went back in and is seated fully; this is the point at which most cable stoppers are lost. Flex-check stoppers at the start of the season, because rubber hardens in storage as well as in use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe cable rubber stopper is for operators and technicians keeping cable openings on the Talos T60X sealed:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators with a cable stopper that has split, hardened or gone missing\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators who have found residue on the inside of a cable opening\u003c\/li\u003e\n\u003cli\u003eTechnicians refitting a cable after replacing it, whose old stopper was damaged\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding wiring after an impact\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking spare stoppers for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe rubber you removed was on a strap and closed an open connector — you need the Connector Rubber Stopper\u003c\/li\u003e\n\u003cli\u003eThe rubber you removed was a round cover over a weight sensor — you need the Weight Sensor Rubber Cover\u003c\/li\u003e\n\u003cli\u003eA liquid joint in the spray system is leaking — you need the Sealing Rings\u003c\/li\u003e\n\u003cli\u003eThe cable itself is chafed through or cut — the cable needs attention, and the stopper alone will not fix it\u003c\/li\u003e\n\u003cli\u003eYou cannot yet say where the old stopper sat — photograph the opening and send it to us first\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this stopper is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe cable rubber stopper is defined by where it sits: around a cable, in an opening. That single fact separates it from every other small rubber part on the Talos T60X, and it is the fact that decides whether this is the part you need.\u003c\/p\u003e\n\u003cp\u003eThe honest case for not ordering it is common. A rubber part that closed an open connector, hung from a strap, is the Connector Rubber Stopper. A round rubber over a weight sensor is the Weight Sensor Rubber Cover. A weeping liquid joint needs a sealing ring. None of those is fixed by a cable stopper.\u003c\/p\u003e\n\u003cp\u003eWhen the old part did sit around a cable, the case for replacing it is just as plain. A split or hardened stopper lets residue through the opening, and a missing one also lets the cable rub on a hard edge on every flight. The first fills the space behind the opening with residue. The second ends with a chafed cable.\u003c\/p\u003e\n\u003cp\u003eWith no photograph published for this part, the stopper you removed is the reference. Photograph it, and the opening it came from, and the match is certain.\u003c\/p\u003e\n\u003cp\u003eConfirm where it sat, inspect the cable and the opening, and fit a stopper that grips. That keeps the cable protected and the space behind it clean.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Cable Rubber Stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Cable rubber stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Wiring — cable protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Seals the gap around a cable where it passes through an opening and cushions the cable against the edge\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the stopper you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e The cable, the Connector Rubber Stopper, the Weight Sensor Rubber Cover, the Sealing Rings, fixings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhotograph:\u003c\/strong\u003e No product image is available; the part you removed is the reference\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber; compound not published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions, cable size and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Confirm the old rubber sat around a cable in an opening, not on a strap in a connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the rubber closed an open connector, covered a weight sensor, or the leak is at a spray-system joint\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFailure mode:\u003c\/strong\u003e Splits, hardens, or is not refitted after cable work\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM wiring-system rubber stopper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X cable stopper; T60X cable grommet; Talos cable rubber seal; T60X wire grommet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Connector Rubber Stopper, not the Weight Sensor Rubber Cover, not the Sealing Rings\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X cable rubber stopper\u003c\/p\u003e\n\u003cp\u003eT60X cable stopper\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X cable grommet\u003c\/p\u003e\n\u003cp\u003eTalos T60X cable rubber seal\u003c\/p\u003e\n\u003cp\u003eT60X wire grommet\u003c\/p\u003e\n\u003cp\u003eTalos T60X cable seal replacement\u003c\/p\u003e\n\u003cp\u003eT60X cable stopper missing\u003c\/p\u003e\n\u003cp\u003eTalos T60X cable opening seal\u003c\/p\u003e\n\u003cp\u003eT60X rubber grommet\u003c\/p\u003e\n\u003cp\u003eDJI Talos cable rubber stopper\u003c\/p\u003e\n\u003cp\u003eTalos T60X cable chafe protection\u003c\/p\u003e\n\u003cp\u003eT60X cable stopper split\u003c\/p\u003e\n\u003cp\u003eTalos T60X wiring seal\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X wiring parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Cable Rubber Stopper\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Cable Rubber Stopper\u003c\/p\u003e\n\u003cp\u003eTalos T60X cable rubber stopper replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X seals\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X wiring protection\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone cable grommet\u003c\/p\u003e\n\u003cp\u003espray drone cable rubber seal\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Cable Rubber Stopper Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X cable rubber stopper?\u003c\/strong\u003e A rubber stopper that seals the gap around a cable where it passes through an opening, keeping residue and wash water out and cushioning the cable against the edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is there no photograph?\u003c\/strong\u003e No product image is published for this part. The stopper you removed is the reference, and a photograph of it or of its opening is what we match against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the Connector Rubber Stopper?\u003c\/strong\u003e No. The Connector Rubber Stopper is on a strap and closes an open connector. The cable rubber stopper seals around a cable that is in place and in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know which stopper I need?\u003c\/strong\u003e Look at where the old one sat. Around a cable in an opening is the cable rubber stopper. On a strap in or over a connector is the Connector Rubber Stopper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the weight sensor rubber cover?\u003c\/strong\u003e No. The Weight Sensor Rubber Cover is a round cover over a weight sensor. This stopper sits around a cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a cable?\u003c\/strong\u003e No. The stopper is supplied alone. The cable stays with the aircraft or is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if I leave it out?\u003c\/strong\u003e Residue and wash water can pass through the opening, and the cable can rub against the edge of the opening on every flight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe old one is split but still in place. Should I replace it?\u003c\/strong\u003e Yes. A split stopper lets residue through beside the cable while still looking fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size cable does it fit?\u003c\/strong\u003e The size is not published for this part. Match against the stopper you removed, or send us a photograph of the cable and opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fix a chafed cable?\u003c\/strong\u003e No. It prevents chafe. A cable that is already chafed through needs attention itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Ease out the old stopper, check the cable and the opening, fit the new stopper around the cable in the same orientation and seat it by hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen do cable stoppers usually go missing?\u003c\/strong\u003e During cable work. When a cable is disconnected or replaced, check that its stopper goes back in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. Flex-check stoppers at the start of each season and replace any that are split, hardened or missing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM wiring-system rubber stopper, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68055452746048,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/aresacres.com\/products\/dji-talos-t60x-oem-cable-rubber-stopper","provider":"Ares Acres","version":"1.0","type":"link"}