{"product_id":"dji-talos-t60x-oem-impeller-pump-bracket","title":"DJI Talos T60X OEM Impeller Pump Bracket","description":"\u003cp\u003eThe DJI Talos T60X OEM Impeller Pump Bracket is the black moulded bracket that holds the impeller pump in its working position in the spray system of the Talos T60X. As the product images show, it is a flat, one-piece black plate with a large semicircular cradle cut into its upper edge, a raised tab at each top corner, several round fixing holes across its face, and an angled leg running down one side. It carries no liquid and no current; its job is to hold the pump still, square and in line with the hoses that feed and leave it. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X pump bracket, pump mount or impeller pump holder after a crack has appeared at a fixing hole, after a hard landing has bent the bracket, or after chasing pump noise and vibration that turned out to be the mount and not the pump.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by cradle shape, corner tabs, fixing-hole pattern and side leg against the bracket you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spray-system bracket, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A flat photograph of the old bracket face-on, with every fixing hole visible, settles the match.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Impeller Pump Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne bracket, supplied on its own.\u003c\/strong\u003e It is the bracket only. It is not an impeller pump, not an impeller pump motor and not an impeller pump module.\u003c\/p\u003e\n\u003cp\u003eNot included: the impeller pump module, the impeller pump motor, screws, washers, vibration pads, hoses, hose clamps or seals. Those are separate parts. If the old screws are corroded or their threads are stripped, renew them with the bracket.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the bracket itself and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe impeller pump moves spray liquid from the tank toward the spraying equipment. It spins fast, it carries a column of liquid, and it is joined to the rest of the aircraft by hoses at its inlet and outlet. The bracket is what holds it there.\u003c\/p\u003e\n\u003cp\u003eOn the Talos T60X the bracket is a black moulded plate, as the product images show. The large semicircular cradle in its upper edge is shaped to the body it holds, the raised tabs at each top corner and the round holes across its face are its fixing and locating points, and the angled leg down one side carries it to the structure it is fixed to. It is a shaped part: every hole and edge has a partner on the pump or the frame.\u003c\/p\u003e\n\u003cp\u003eThat shape is the whole of its value. A bracket that has lost a tab, cracked through a fixing hole or been bent in an impact may still hang on to the pump, but it no longer holds it square, still and in line with its hoses.\u003c\/p\u003e\n\u003cp\u003eWhat the bracket lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVibration from the pump itself on every minute of spraying\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system on every flight\u003c\/li\u003e\n\u003cli\u003eThe weight and movement of the pump and the liquid inside it\u003c\/li\u003e\n\u003cli\u003ePull from the inlet and outlet hoses as the aircraft flexes and the tank level changes\u003c\/li\u003e\n\u003cli\u003eSpray mist, fertiliser residue and wash water\u003c\/li\u003e\n\u003cli\u003eImpacts in hard landings and knocks in transport\u003c\/li\u003e\n\u003cli\u003eScrews being removed and refitted each time the pump is serviced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is mechanical: a crack that starts at a fixing hole, a tab snapped off, a fixing hole worn oval so the screw no longer clamps, or a bracket bent so the cradle no longer sits square. All of these can be seen or felt once the pump area is opened up.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe bracket's engineering role is to hold the impeller pump in one fixed position. It does that in four ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarrying\u003c\/strong\u003e — it takes the weight of the pump and the liquid inside it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating\u003c\/strong\u003e — its cradle, tabs and fixing holes put the pump in one exact place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestraining\u003c\/strong\u003e — it stops the pump moving under its own vibration and the aircraft's\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAligning\u003c\/strong\u003e — it keeps the pump inlet and outlet in line with the hoses that join them\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bracket has no hydraulic or electrical role. No liquid passes through it, it carries no current, and the aircraft has no sensor watching it. It affects the pump only through how well it holds it.\u003c\/p\u003e\n\u003cp\u003eWhat the impeller pump bracket does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not repair a pump motor that has failed or a pump that has lost output\u003c\/li\u003e\n\u003cli\u003eIt does not clear a blockage in the pump, filters, hoses or nozzles\u003c\/li\u003e\n\u003cli\u003eIt does not cure a flow warning that comes from a sensor or a cable\u003c\/li\u003e\n\u003cli\u003eIt does not replace the pump body, its seals or its hose connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a pump that buzzes, shakes or chafes its hoses may be sitting in a loose bracket\u003c\/h2\u003e\n\u003cp\u003eWhen the spray system misbehaves, the pump gets the blame first. It is the moving part, it makes the noise, and it is the expensive replacement. But several of the classic pump complaints are just as well explained by the part holding it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms a loose or damaged bracket can produce:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA pump that sounds louder or harsher than it used to, or rattles at certain speeds\u003c\/li\u003e\n\u003cli\u003eVibration felt through the frame around the pump area\u003c\/li\u003e\n\u003cli\u003eHoses at the pump inlet or outlet that rub, chafe or work loose at their joints\u003c\/li\u003e\n\u003cli\u003eA weep or drip at a pump hose joint that keeps coming back after it is tightened\u003c\/li\u003e\n\u003cli\u003eFretting marks or polished patches on the pump body where it has been moving in the cradle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach of these can also come from a worn pump. The way to tell them apart is a two-minute check with the aircraft powered down and the battery removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe bracket check:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrip the pump and try to move it in its cradle; a pump held properly does not shift or knock\u003c\/li\u003e\n\u003cli\u003eLook along every edge and around every fixing hole for cracks, especially the corners of the cradle\u003c\/li\u003e\n\u003cli\u003eCheck both top tabs are present and unbroken\u003c\/li\u003e\n\u003cli\u003eCheck every fixing screw is present and tight, and that no hole has worn oval\u003c\/li\u003e\n\u003cli\u003eLay a straight edge across the bracket face; it should sit flat, not twisted\u003c\/li\u003e\n\u003cli\u003eLook at the pump hoses where they meet the pump for rub marks or stretched joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReading the result:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump moves, bracket cracked, bent or missing a tab — replace the bracket first, then judge the pump again\u003c\/li\u003e\n\u003cli\u003ePump moves, bracket sound, screws loose — renew and tighten the screws; the bracket is not the fault\u003c\/li\u003e\n\u003cli\u003ePump held firm and still noisy or low on output — the bracket is not the cause; the pump, its motor or the supply side need inspection\u003c\/li\u003e\n\u003cli\u003eFlow warning with a firmly held pump — look at the flow meter, its signal cable and the filters before the pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo the bracket check first, while that information is still cheap. A loose bracket is the one cause of pump noise that a new pump will not cure, because the new pump goes straight back into the same loose mount.\u003c\/p\u003e\n\u003cp\u003eWhen the bracket is the fault, it is the whole repair, and the pump that was blamed keeps working.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the impeller pump bracket when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack anywhere in the moulding, most often at a fixing hole or a cradle corner\u003c\/li\u003e\n\u003cli\u003eA top tab snapped off or split\u003c\/li\u003e\n\u003cli\u003eA fixing hole worn oval so the screw no longer clamps\u003c\/li\u003e\n\u003cli\u003eA bracket bent or twisted so it no longer sits flat\u003c\/li\u003e\n\u003cli\u003eA pump that moves in its cradle with every screw tight\u003c\/li\u003e\n\u003cli\u003eAny hard landing or impact that struck the pump area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they are found when the bracket comes off:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe impeller pump body for fretting marks or cracks\u003c\/li\u003e\n\u003cli\u003eThe pump inlet and outlet hoses and their joints\u003c\/li\u003e\n\u003cli\u003eThe frame points the bracket fixes to\u003c\/li\u003e\n\u003cli\u003eThe fixing screws and their threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the bracket. It is replaced when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Impeller Pump Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spray system — impeller pump mounting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Pump bracket (single moulded component)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black, as shown in the product images\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Large semicircular cradle in the upper edge; a raised tab at each top corner; round fixing holes across the face; an angled leg down one side, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the bracket carries no current and is not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid path:\u003c\/strong\u003e None — no spray liquid passes through the bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Holding the impeller pump in the spray system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fixed through its fixing holes with the aircraft's own screws, the pump seated in its cradle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws, washers, pads and hose clamps are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the bracket holds the pump square or it does not, with no adjustment that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spray-system bracket\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eDrain the spray tank and run clean water through the system so the pump area is not full of chemical when it is opened\u003c\/li\u003e\n\u003cli\u003ePhotograph the pump and bracket in place from two sides, showing how the hoses are routed and which way the bracket faces\u003c\/li\u003e\n\u003cli\u003eCompare the new bracket with the old one: cradle shape, tabs, hole pattern and side leg\u003c\/li\u003e\n\u003cli\u003eHave replacement screws ready if the old ones are corroded or their heads are damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease the pump hoses only if the pump has to come out of the bracket, and catch any liquid left in them\u003c\/li\u003e\n\u003cli\u003eRemove the bracket fixing screws and keep them in order\u003c\/li\u003e\n\u003cli\u003eLift the pump and bracket out together without pulling on the pump cable or the hoses\u003c\/li\u003e\n\u003cli\u003eInspect the pump body for fretting marks or cracks where it sat in the old bracket\u003c\/li\u003e\n\u003cli\u003eSeat the pump in the new bracket's cradle in the same orientation as before\u003c\/li\u003e\n\u003cli\u003eOffer the bracket to its fixing points and start every screw by hand before tightening any of them\u003c\/li\u003e\n\u003cli\u003eTighten evenly; DJI does not publish a torque figure for these screws, so stop when the bracket is held flat and do not over-tighten into the moulding\u003c\/li\u003e\n\u003cli\u003eReconnect the hoses so they run without a twist or a strain at the pump joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrip the pump and confirm it does not move in the bracket\u003c\/li\u003e\n\u003cli\u003eFill the tank with clean water and run the pump on the ground; check every pump hose joint for weeping\u003c\/li\u003e\n\u003cli\u003eListen to the pump; it should sound smooth and even with no knock or rattle\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the condition of the pump in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e When the aircraft is washed down, grip the pump to check it is still held firm and look over the bracket for new cracks around its fixing holes. A pump that has started to move in its mount is found by hand long before it is heard.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe impeller pump bracket is for operators and technicians keeping the spray system of the Talos T60X held together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators whose pump bracket cracked or broke at a fixing point\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators chasing pump noise, rattle or hose chafe with a pump that still delivers\u003c\/li\u003e\n\u003cli\u003eOperators whose bracket was bent in a hard landing or in transport\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding the pump area after an impact\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors and fleet managers stocking spray-system hardware for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe pump is held firm and has lost output or stopped — the impeller pump module or the impeller pump motor needs inspection, not the bracket\u003c\/li\u003e\n\u003cli\u003eYou need the pump itself — the Impeller pump module is a separate part\u003c\/li\u003e\n\u003cli\u003eYou need only the motor that drives the pump — the Impeller Pump Motor is a separate part\u003c\/li\u003e\n\u003cli\u003eThe pump is loose but the bracket is sound and only the screws are missing or stripped — replace the screws\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this bracket is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe impeller pump bracket is the cheapest part in the pump area and the one most often left out of the diagnosis. That is the whole argument for it: a loose or damaged bracket produces symptoms that point at the pump.\u003c\/p\u003e\n\u003cp\u003eA pump that is not held still runs rougher, sounds harsher, shakes the frame around it and works its hoses against their joints. An operator who hears that and replaces the pump puts a new pump back into the same loose mount, and the symptoms come back.\u003c\/p\u003e\n\u003cp\u003eThe reverse also matters. A pump that is held firm and has lost output is not a bracket problem, and a new bracket will not bring the flow back. The bracket check takes two minutes with the battery out and answers the question both ways.\u003c\/p\u003e\n\u003cp\u003eSo the order is simple. Grip the pump. If it moves and the bracket is cracked, bent or missing a tab, replace the bracket and judge the pump again afterwards. If it is held firm, leave the bracket alone and look at the pump, its motor and the supply side.\u003c\/p\u003e\n\u003cp\u003eDone that way, the bracket is either the whole repair or ruled out in two minutes, and a pump that did not need replacing is not replaced.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Impeller Pump Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Impeller pump bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spray system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Holding the impeller pump in the spray system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Holds the impeller pump still, square and in line with its hoses\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical role:\u003c\/strong\u003e None — no current, not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid path:\u003c\/strong\u003e None — no spray liquid passes through it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the bracket you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Impeller pump module, impeller pump motor, screws, pads, hoses, clamps\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Semicircular cradle, corner tabs, face fixing holes, angled side leg\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A pump that moves in its cradle can sound and behave like a failing pump; grip the pump before replacing it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the pump is held firm and has lost output\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spray-system bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X pump bracket; T60X pump mount; Talos impeller pump holder; T60X water pump bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Impeller pump module, not the Impeller Pump Motor, not a pump hose or seal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X impeller pump bracket\u003c\/p\u003e\n\u003cp\u003eT60X pump bracket\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X pump mount\u003c\/p\u003e\n\u003cp\u003eTalos T60X impeller pump holder\u003c\/p\u003e\n\u003cp\u003eT60X pump bracket replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X cracked pump bracket\u003c\/p\u003e\n\u003cp\u003eT60X pump rattle\u003c\/p\u003e\n\u003cp\u003eTalos T60X pump vibration\u003c\/p\u003e\n\u003cp\u003eT60X spray pump mount\u003c\/p\u003e\n\u003cp\u003eDJI Talos pump bracket\u003c\/p\u003e\n\u003cp\u003eTalos T60X water pump bracket\u003c\/p\u003e\n\u003cp\u003eT60X impeller pump mounting bracket\u003c\/p\u003e\n\u003cp\u003eTalos T60X pump hose chafe\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X spray system bracket\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Impeller Pump Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Impeller Pump Bracket\u003c\/p\u003e\n\u003cp\u003eTalos T60X impeller pump bracket replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X spray system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X pump parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone pump bracket\u003c\/p\u003e\n\u003cp\u003espray drone pump mount replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Impeller Pump Bracket Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X impeller pump bracket?\u003c\/strong\u003e The black moulded bracket that holds the impeller pump in place in the spray system. It carries no liquid and no current; it holds the pump still and in line with its hoses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the pump included?\u003c\/strong\u003e No. This is the bracket only. The Impeller pump module and the Impeller Pump Motor are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy pump is noisy. Is it the pump or the bracket?\u003c\/strong\u003e Grip the pump with the battery out. If it moves and the bracket is cracked, bent or missing a tab, the bracket is the likely cause. If the pump is held firm, look at the pump itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new bracket bring back lost flow?\u003c\/strong\u003e No. A bracket holds the pump; it does not change what the pump delivers. Lost flow with a firmly held pump points at the pump, its motor, the filters or the flow sensing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a loose bracket damage the hoses?\u003c\/strong\u003e Yes. A pump that moves works its hoses against their joints, which shows up as rub marks, weeping joints and joints that work loose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Reuse the aircraft's screws if they are sound, and renew any that are corroded or stripped.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a cracked bracket?\u003c\/strong\u003e A glued crack keeps flexing under pump vibration and opens again. Replace the bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy bracket is slightly bent but still holds the pump. Is that a problem?\u003c\/strong\u003e Yes. A bent bracket holds the pump out of square and out of line with its hoses, which loads the hose joints and adds vibration. Replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Drain and rinse the system, power down, remove the battery, lift the pump and bracket out together, seat the pump in the new bracket and refit it with the hoses unstrained.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the screws?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the bracket is held flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drain the tank first?\u003c\/strong\u003e Yes. Drain the tank and run clean water through the system so the pump area is not full of chemical when it is opened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. It is replaced when it is damaged, and checked by hand whenever the aircraft is washed down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I check after fitting it?\u003c\/strong\u003e That the pump does not move in the bracket, that no hose joint weeps when the pump runs on clean water, and that the pump sounds smooth on the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM spray-system bracket, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68055409951040,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-impeller-pump-bracket-1.png?v=1794094883","url":"https:\/\/aresacres.com\/products\/dji-talos-t60x-oem-impeller-pump-bracket","provider":"Ares Acres","version":"1.0","type":"link"}