{"product_id":"dji-talos-t60x-oem-power-distribution-board-dustproof-cover","title":"DJI Talos T60X OEM Power Distribution Board Dustproof Cover","description":"\u003cp\u003eThe DJI Talos T60X OEM Power Distribution Board Dustproof Cover is the black sealing frame that keeps dust, grit and spray out of the power distribution board area of the Talos T60X. As the product images show, it is a flat black oval frame with a large rectangular opening in its centre, a small fixing hole near each of the four inner corners, and small notches stepped into the inner edge. It carries no current and holds nothing up; its whole job is to close a gap so that what is on one side stays out of the other. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X PDB dust cover, power board gasket or dustproof seal after finding it torn when the power area was opened, after finding dust or residue inside an area that should have been clean, or as a matter of course when the power distribution board is being serviced.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by oval outline, central opening, corner fixing holes and inner-edge notches against the cover you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM power-system seal, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A flat photograph of the old frame from above, with all four holes and the inner notches visible, settles the match.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Power Distribution Board Dustproof Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne dustproof cover, supplied on its own.\u003c\/strong\u003e It is the sealing frame only. It is not the Power Distribution Board Upper Cover, not the power distribution board, and not the supporting piece beneath the board.\u003c\/p\u003e\n\u003cp\u003eNot included: the Power Distribution Board Module, the Power Distribution Board Upper Cover, the supporting piece, screws, washers or any other seal. Those are separate parts. If the screws that clamp the frame are stripped or corroded, renew them with it.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the dustproof cover itself and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe power distribution board is one of the most important electrical assemblies on the aircraft, and it works in a hard place: an agricultural spray aircraft flies through dust, chaff and spray drift, lands on dirt and gets washed down at the end of the day. Heavy wiring has to reach the board, so its area cannot be a solid sealed box. Wherever there is an opening, something has to close the gap. The dustproof cover is that something.\u003c\/p\u003e\n\u003cp\u003eOn the Talos T60X it is a black oval frame, as the product images show. The large rectangular opening in its centre leaves room for what has to pass through or be reached, the wide oval band around it is the sealing surface, the four small holes near the inner corners locate and clamp it, and the notches stepped into the inner edge line up with features of the parts it seals against.\u003c\/p\u003e\n\u003cp\u003eIts name says what it is for and how it differs from the other parts with the board's name. The Power Distribution Board Upper Cover is the grey moulding that closes over the top of the board. The Power Distribution Board Module is the board itself. The supporting piece carries the board from beneath. The dustproof cover is the seal; it holds nothing up and closes nothing over, it fills a gap.\u003c\/p\u003e\n\u003cp\u003eWhat the dustproof cover lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClamping pressure on its sealing band every hour it is fitted\u003c\/li\u003e\n\u003cli\u003eFine dust and grit driven at it by the downwash in every take-off and landing\u003c\/li\u003e\n\u003cli\u003eSpray drift and fertiliser residue settling on the power area\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system on every flight\u003c\/li\u003e\n\u003cli\u003eHeat from the board and its high-current connections\u003c\/li\u003e\n\u003cli\u003eBeing lifted and refitted each time the board is serviced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is often not visible at a glance: a sealing band flattened or distorted so it no longer meets the surface around it, a fine split starting at a fixing hole, or a frame refitted slightly out of position so one edge no longer seals. A torn or missing frame is obvious; these are not.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe dustproof cover's engineering role is to close the gap at an opening in the power distribution board area. It does that in three ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e — its band fills the gap between the parts it is clamped between, so dust and spray cannot pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating\u003c\/strong\u003e — its four holes and inner notches put it in one exact position against those parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFraming\u003c\/strong\u003e — its central opening leaves room for what has to pass through or be reached\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe dustproof cover has no electrical or structural role. It carries no current, it supports nothing, and the aircraft has no sensor watching it. A failed seal sends no warning; it simply lets dirt in.\u003c\/p\u003e\n\u003cp\u003eWhat the power distribution board dustproof cover does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not repair a power distribution board or clean one that is already contaminated\u003c\/li\u003e\n\u003cli\u003eIt does not replace a cracked upper cover — a seal under a broken cover still leaves the area open\u003c\/li\u003e\n\u003cli\u003eIt does not cure a power fault, a warning or an aircraft that will not power up\u003c\/li\u003e\n\u003cli\u003eIt does not hold the board in place — that is the supporting piece and the board's own fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a seal that has stopped sealing still looks like a seal, so read the dirt, not the frame\u003c\/h2\u003e\n\u003cp\u003eA dustproof cover rarely fails in a way that announces itself. A torn or missing frame is obvious, but the common failure is quieter: the band has been flattened, distorted or refitted slightly out of position, and it still looks whole lying in place. It has simply stopped closing the gap.\u003c\/p\u003e\n\u003cp\u003eSo the frame itself is a poor witness. The evidence is on the clean side of it. A seal that is working leaves the protected side clean; a seal that is leaking leaves a trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReading the evidence, with the aircraft powered down and the battery removed:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLift the parts that cover the frame and look at the protected side of it before touching anything\u003c\/li\u003e\n\u003cli\u003eLook for fine dust lines or tide marks on the protected side that follow part of the frame's edge; they point straight at where it leaked\u003c\/li\u003e\n\u003cli\u003eLook for dried spray residue or water marks on the board area beneath an opening\u003c\/li\u003e\n\u003cli\u003eLook at the sealing band for flattened sections, waves or distortion compared with the rest\u003c\/li\u003e\n\u003cli\u003eLook closely at each of the four fixing holes for a fine split running outward\u003c\/li\u003e\n\u003cli\u003eCheck the frame sits in its notches all the way round and is not lifted at one edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReading the result:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDust or residue on the protected side along one edge — the seal has failed there; replace the frame and clean the area\u003c\/li\u003e\n\u003cli\u003eA split at a fixing hole or a torn band — replace the frame\u003c\/li\u003e\n\u003cli\u003eFrame whole, protected side clean — the seal is working; leave it, or renew it if the board is being serviced and the band looks flattened\u003c\/li\u003e\n\u003cli\u003eProtected side contaminated and the upper cover cracked — replace the cover as well; a new seal under a broken cover still leaves the area open\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRead the protected side first, while that information is still cheap. Once the area is wiped clean, the trail that showed where the seal was leaking is gone with it.\u003c\/p\u003e\n\u003cp\u003eWhen the frame is the fault, it is the whole repair for the seal, and the contamination it let in gets cleaned out on the way past.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the power distribution board dustproof cover when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA tear, split or missing section anywhere in the frame\u003c\/li\u003e\n\u003cli\u003eA fine split running out from one of the four fixing holes\u003c\/li\u003e\n\u003cli\u003eA sealing band that is flattened, wavy or distorted compared with the rest of it\u003c\/li\u003e\n\u003cli\u003eDust lines, tide marks or dried residue on the protected side along the frame's edge\u003c\/li\u003e\n\u003cli\u003eA frame that no longer sits in its notches all the way round\u003c\/li\u003e\n\u003cli\u003eA frame that was stretched or creased when the board was last serviced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they are found when the frame comes out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe power distribution board and its connectors, for dust, residue and moisture\u003c\/li\u003e\n\u003cli\u003eThe Power Distribution Board Upper Cover, for cracks that would leave the area open regardless\u003c\/li\u003e\n\u003cli\u003eThe surfaces the frame seals against, for damage or old residue that would stop a new frame sealing\u003c\/li\u003e\n\u003cli\u003eThe screws that clamp it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the dustproof cover. It is replaced when it is damaged or when it has stopped sealing, and many technicians renew it whenever the board is serviced.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Power Distribution Board Dustproof Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power system — power distribution board dust sealing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Dustproof cover (sealing frame)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 dustproof cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black, as shown in the product images\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Flat oval frame; large rectangular central opening; a fixing hole near each of the four inner corners; notches stepped into the inner edge, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the dustproof cover carries no current and is not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStructural role:\u003c\/strong\u003e None — it seals a gap and supports nothing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e At an opening in the power distribution board area, clamped between the parts it seals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Located by its fixing holes and inner notches and clamped with the aircraft's own screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws and washers are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the frame seals all the way round or it does not, with no adjustment that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM power-system seal\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the outside of the power area so loose dirt does not fall inward when it is opened\u003c\/li\u003e\n\u003cli\u003ePhotograph the frame in place before lifting it, showing which way round it sits and where its notches fall\u003c\/li\u003e\n\u003cli\u003eLook at the protected side of the old frame for dust lines or residue before anything is wiped\u003c\/li\u003e\n\u003cli\u003eCompare the new frame with the old one: outline, central opening, holes and notches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the clamping screws and keep them in order\u003c\/li\u003e\n\u003cli\u003eLift the old frame straight off; do not drag it across the board area\u003c\/li\u003e\n\u003cli\u003eClean the board area of any dust or residue the old seal let through, and dry it fully\u003c\/li\u003e\n\u003cli\u003eClean both sealing surfaces so nothing is trapped under the new frame\u003c\/li\u003e\n\u003cli\u003eLay the new frame in place the same way round as the old one, with every notch seated\u003c\/li\u003e\n\u003cli\u003eDo not stretch the frame to make a hole line up; if it will not seat without stretching, check it is the right way round\u003c\/li\u003e\n\u003cli\u003eFit the screws evenly in a crossing order; DJI does not publish a torque figure for them, so stop when the frame is clamped flat and do not crush the band\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the frame sits flat with no edge lifted and no wave in the band\u003c\/li\u003e\n\u003cli\u003eCheck no wire or connector is trapped under the frame or pressed against its inner edge\u003c\/li\u003e\n\u003cli\u003eRefit the upper cover and any parts removed to reach the frame\u003c\/li\u003e\n\u003cli\u003eRefit the battery and power up on the ground; confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eAfter the next few working days, look at the protected side again; it should stay clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Do not aim a pressure washer at the power area's seams. Whenever the area is opened, look at the protected side of the frame before wiping anything; clean surfaces mean the seal is working.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe power distribution board dustproof cover is for operators and technicians keeping dust and spray out of the power area of the Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators who found the frame torn, split or missing when the power area was opened\u003c\/li\u003e\n\u003cli\u003eTechnicians who found dust or residue on the protected side of the frame\u003c\/li\u003e\n\u003cli\u003eTechnicians servicing the power distribution board who renew the seal as a matter of course\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors working in dusty conditions who keep spare seals on the trailer\u003c\/li\u003e\n\u003cli\u003eService centres rebuilding the power area after contamination or an impact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe grey cover over the board is cracked — the Power Distribution Board Upper Cover is a separate part\u003c\/li\u003e\n\u003cli\u003eThe board itself has failed — the Power Distribution Board Module is a separate part\u003c\/li\u003e\n\u003cli\u003eThe board is loose or sits out of line — the supporting piece beneath it is a separate part\u003c\/li\u003e\n\u003cli\u003eThe frame is whole and the protected side is clean — the seal is working\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this dustproof cover is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe dustproof cover fails invisibly. A seal that has been flattened, distorted or refitted slightly out of place still looks like a seal. It is still there, still black, still in roughly the right place, and it has stopped closing the gap.\u003c\/p\u003e\n\u003cp\u003eNothing on the aircraft notices. There is no sensor on a seal and no warning when it leaks. Dust, grit and spray reach the power distribution board area a little at a time, and the first sign is often a connector or a contact that has started to suffer, long after the seal stopped working.\u003c\/p\u003e\n\u003cp\u003eThat is why the evidence is read on the clean side, not on the frame. Dust lines and residue that follow part of the frame's edge show exactly where it leaked, and they are only there to read until the area is wiped.\u003c\/p\u003e\n\u003cp\u003eSo the order is simple. Open the area, look at the protected side before touching anything, and replace a frame that is split, torn, flattened or has let dirt through. Clean what it let in, and fit the new frame flat, seated in every notch and clamped without crushing.\u003c\/p\u003e\n\u003cp\u003eDone that way, a small seal keeps doing the job nobody sees, in front of a board that everyone would notice losing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Power Distribution Board Dustproof Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Power distribution board dustproof cover (sealing frame)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e At an opening in the power distribution board area\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Seals the gap at the opening against dust, grit and spray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical role:\u003c\/strong\u003e None — no current, not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStructural role:\u003c\/strong\u003e None — it supports nothing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the cover you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 dustproof cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Power distribution board, upper cover, supporting piece, screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Oval frame, rectangular central opening, four corner fixing holes, inner-edge notches\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A failed seal still looks whole; dust lines on the protected side show where it leaked\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the frame is whole and the protected side is clean, or when the cracked part is the upper cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM power-system seal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X PDB dust cover; T60X power board gasket; Talos power distribution dust seal; T60X PDB seal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Power Distribution Board Upper Cover, not the Power Distribution Board Module, not the supporting piece\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X power distribution board dustproof cover\u003c\/p\u003e\n\u003cp\u003eT60X PDB dust cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X PDB dustproof cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X power board gasket\u003c\/p\u003e\n\u003cp\u003eT60X power distribution board seal\u003c\/p\u003e\n\u003cp\u003eTalos T60X dustproof seal\u003c\/p\u003e\n\u003cp\u003eT60X PDB gasket replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X dust in power board\u003c\/p\u003e\n\u003cp\u003eT60X power board dust seal\u003c\/p\u003e\n\u003cp\u003eDJI Talos power board dustproof cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X black oval gasket\u003c\/p\u003e\n\u003cp\u003eT60X power distribution dust cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X PDB seal torn\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X power system seal\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Power Distribution Board Dustproof Cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Power Distribution Board Dustproof Cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X power distribution board dustproof cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X power system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X seals and gaskets\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone dust seal\u003c\/p\u003e\n\u003cp\u003espray drone gasket replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Power Distribution Board Dustproof Cover Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X power distribution board dustproof cover?\u003c\/strong\u003e The black oval sealing frame that closes the gap at an opening in the power distribution board area, keeping dust, grit and spray out. It carries no current and supports nothing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the grey cover that goes over the board?\u003c\/strong\u003e No. That is the Power Distribution Board Upper Cover, a separate part. The dustproof cover is the black sealing frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the power distribution board included?\u003c\/strong\u003e No. This is the dustproof cover only. The Power Distribution Board Module is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy old frame looks fine. How do I know if it was sealing?\u003c\/strong\u003e Look at the protected side before wiping anything. Dust lines or residue that follow part of the frame's edge show it was leaking there. A clean protected side means it was working.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new dustproof cover fix my power fault?\u003c\/strong\u003e No. The seal carries no current. If dirt has already reached the board or its connectors, they need cleaning and inspection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reuse the old frame when I service the board?\u003c\/strong\u003e If it is whole, flat and the protected side was clean, it can go back. If the band is flattened, split at a hole or let dirt through, replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a torn frame?\u003c\/strong\u003e A glued tear rarely seals and usually opens again. Replace the frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe holes do not line up unless I stretch it. Is it the wrong part?\u003c\/strong\u003e Check it is the right way round first, with every notch seated. A frame stretched into place will not seal evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Reuse the aircraft's screws if they are sound, and renew any that are stripped or corroded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Remove the battery, lift the old frame, clean the area and both sealing surfaces, lay the new frame in place with every notch seated, and clamp it evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the screws?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly in a crossing order and stop when the frame is clamped flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. It is replaced when it is damaged or has stopped sealing, and many technicians renew it whenever the board is serviced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM power-system seal, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68055427187008,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-power-distribution-board-dustproof-cover-1.png?v=1794094885","url":"https:\/\/aresacres.com\/products\/dji-talos-t60x-oem-power-distribution-board-dustproof-cover","provider":"Ares Acres","version":"1.0","type":"link"}