{"product_id":"dji-talos-t60x-oem-power-distribution-board-supporting-piece","title":"DJI Talos T60X OEM Power Distribution Board Supporting Piece","description":"\u003cp\u003eThe DJI Talos T60X OEM Power Distribution Board Supporting Piece is the grey structural support that carries the power distribution board in its position in the power system of the Talos T60X. As the product images show, it is a flat grey rectangular plate with a narrower stepped section along its lower edge and three pins standing proud of its face, one near each end and one in the middle. It carries no current itself; its job is to hold the board level, still and exactly where the heavy power wiring and connectors expect to find it. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X PDB support, power board bracket or power distribution board mount after an impact has cracked or distorted the support, after a pin has broken off, or after finding the board loose when its cover was lifted.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by plate outline, stepped lower section and pin positions against the support you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM power-system support, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old support face-on, showing all three pins and the stepped section, settles the match.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Power Distribution Board Supporting Piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne supporting piece, supplied on its own.\u003c\/strong\u003e It is the support only. It is not the power distribution board, not the upper cover over the board, and not the dustproof cover.\u003c\/p\u003e\n\u003cp\u003eNot included: the Power Distribution Board Module, the Power Distribution Board Upper Cover, the dustproof cover, screws, nuts, washers, cable ties or wiring. Those are separate parts. If the old screws were stripped or corroded, renew them with the support.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the supporting piece itself and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe power distribution board takes power from the battery side of the aircraft and sends it on to the systems that use it. Heavy wiring and large connectors meet it from several directions, and every one of those joints depends on the board staying exactly where it was put. The supporting piece is what holds it there.\u003c\/p\u003e\n\u003cp\u003eOn the Talos T60X the supporting piece is a grey rectangular plate, as the product images show. The narrower stepped section along its lower edge seats it on the structure below, and the three pins standing proud of its face, one near each end and one in the middle, are its locating points. It is a precise part: its outline and the spacing of its pins decide where the board sits.\u003c\/p\u003e\n\u003cp\u003eThree parts on the T60X carry the power distribution board's name besides this one, and they do different jobs. The Power Distribution Board Module is the board itself. The Power Distribution Board Upper Cover closes over the top of it. The Power Distribution Board Dustproof Cover is the sealing frame around an opening. The supporting piece is the one underneath, carrying the board.\u003c\/p\u003e\n\u003cp\u003eWhat the supporting piece lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe weight of the board and the pull of every heavy cable attached to it\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system on every flight\u003c\/li\u003e\n\u003cli\u003eShock loads in hard landings and knocks in transport\u003c\/li\u003e\n\u003cli\u003eHeat from the board and its high-current connections\u003c\/li\u003e\n\u003cli\u003eSpray residue and wash water reaching the power area\u003c\/li\u003e\n\u003cli\u003eScrews being removed and refitted whenever the board is serviced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is mechanical: a crack across the plate, a pin bent or snapped off, a stepped section broken away, or a plate distorted by an impact or by heat so it no longer sits flat. Most of these can be seen once the board is lifted; a slight distortion can only be found by checking the plate against a flat surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe supporting piece's engineering role is to carry the power distribution board in one fixed position. It does that in four ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarrying\u003c\/strong\u003e — it takes the weight of the board and the load of the cables attached to it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating\u003c\/strong\u003e — its pins and stepped section put the board in one exact place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling\u003c\/strong\u003e — its flat face keeps the board square to the connectors that meet it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestraining\u003c\/strong\u003e — it stops the board moving under vibration and shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe supporting piece does not conduct power, is not part of any circuit, and the aircraft has no sensor watching it. It affects the board only through how well it holds it.\u003c\/p\u003e\n\u003cp\u003eWhat the power distribution board supporting piece does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not repair a power distribution board that has failed\u003c\/li\u003e\n\u003cli\u003eIt does not cure a power fault, a warning or an aircraft that will not power up\u003c\/li\u003e\n\u003cli\u003eIt does not replace the upper cover or the dustproof cover\u003c\/li\u003e\n\u003cli\u003eIt does not tighten a connector that has worked loose or replace a damaged terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a support that still holds the board but holds it out of line loads every connector on it\u003c\/h2\u003e\n\u003cp\u003eA broken supporting piece is easy to find: the board is loose, a pin is missing, or a piece of the plate has come away. The harder case is the support that is still whole and still holding the board, but holding it out of line.\u003c\/p\u003e\n\u003cp\u003eThat happens when the plate has been distorted by an impact or by heat, or when a pin has been bent rather than broken. The board is still fixed, nothing rattles, and the aircraft may fly normally. But the board now sits a little high at one end, or tilted, or shifted, and every heavy cable and connector meeting it is carrying that error as a constant side load.\u003c\/p\u003e\n\u003cp\u003eConnectors carry current well when they are straight and fully seated. Held at an angle under vibration, they fret, they work partly out, and their contacts start to run hot. The symptom eventually shows up at a connector or a terminal, and the support that caused it looks fine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe supporting-piece check, with the aircraft powered down and the battery removed:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLift the upper cover and look at how the board sits; it should be level, with no end higher than the other\u003c\/li\u003e\n\u003cli\u003eLook at each heavy connector where it meets the board; it should enter straight, not at an angle\u003c\/li\u003e\n\u003cli\u003eCheck all three pins are present, straight and seated in the board\u003c\/li\u003e\n\u003cli\u003eLift the board and look along the supporting piece for cracks, especially around the pins and the stepped section\u003c\/li\u003e\n\u003cli\u003eLay the support on a flat surface or put a straight edge across it; it should lie flat with no rocking\u003c\/li\u003e\n\u003cli\u003eLook at the connector bodies and terminals for discoloration or heat marks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReading the result:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport cracked, a pin broken or the plate distorted — replace the support, and inspect every connector it was loading\u003c\/li\u003e\n\u003cli\u003eSupport flat and whole but the board loose — the fixing screws are the fault\u003c\/li\u003e\n\u003cli\u003eSupport flat and whole, board level, and a connector still running hot — the connector, the terminal or the board needs inspection; the support is not the cause\u003c\/li\u003e\n\u003cli\u003ePower fault with a sound support and a level board — the support is ruled out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the support whenever the board is opened, while that information is still cheap. A distorted support found at that point costs one part; the same support left in place keeps loading the connectors until one of them fails.\u003c\/p\u003e\n\u003cp\u003eWhen the support is the fault, it is the whole repair for the support, and the connectors it was loading get inspected on the way past.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the power distribution board supporting piece when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack anywhere in the plate, most often around a pin or the stepped section\u003c\/li\u003e\n\u003cli\u003eA pin bent, loose or snapped off\u003c\/li\u003e\n\u003cli\u003eA plate that rocks on a flat surface or no longer sits flat under the board\u003c\/li\u003e\n\u003cli\u003eA board that sits tilted or high at one end with the screws tight\u003c\/li\u003e\n\u003cli\u003eHeavy connectors entering the board at an angle because the board is out of line\u003c\/li\u003e\n\u003cli\u003eHeat distortion of the plate near the board's high-current connections\u003c\/li\u003e\n\u003cli\u003eAny hard landing or impact that reached the power area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they are found when the support comes out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe power distribution board and its connectors and terminals\u003c\/li\u003e\n\u003cli\u003eThe heavy cables that meet the board, for chafe and strain at their entries\u003c\/li\u003e\n\u003cli\u003eThe upper cover and the dustproof cover that close the area\u003c\/li\u003e\n\u003cli\u003eThe structure the support seats on, and the fixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the supporting piece. It is replaced when it is damaged or distorted.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Power Distribution Board Supporting Piece\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power system — power distribution board support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Supporting piece (structural support for the board)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 supporting piece\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey, as shown in the product images\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Flat rectangular plate; narrower stepped section along the lower edge; three pins standing proud of the face, one near each end and one in the middle, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the supporting piece carries no current and is not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Beneath the power distribution board, carrying it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Seated by its stepped section and pins and fixed with the aircraft's own screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws, nuts and washers are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the support holds the board level or it does not, with no adjustment that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM power-system structural support\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery; do not work on the power area with a battery fitted\u003c\/li\u003e\n\u003cli\u003eRinse and dry the area around the power distribution board so residue does not fall into it when it is opened\u003c\/li\u003e\n\u003cli\u003ePhotograph the board in place from above and from the side, showing every connector and cable routing\u003c\/li\u003e\n\u003cli\u003eLabel each heavy cable and connector before anything is disconnected\u003c\/li\u003e\n\u003cli\u003eCompare the new supporting piece with the old one: outline, stepped section and pin positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLift the upper cover and the dustproof cover as needed to reach the board\u003c\/li\u003e\n\u003cli\u003eDisconnect the board's connectors by their bodies, never by their cables\u003c\/li\u003e\n\u003cli\u003eRelease the board's fixing screws and lift the board off the support without levering against its components\u003c\/li\u003e\n\u003cli\u003eRemove the old supporting piece and clean the surface it sits on\u003c\/li\u003e\n\u003cli\u003eSeat the new supporting piece by its stepped section and fit its fixing screws evenly; DJI does not publish a torque figure for them, so stop when it is held flat and do not over-tighten\u003c\/li\u003e\n\u003cli\u003eLower the board onto the pins, check it sits level, and refit its fixing screws\u003c\/li\u003e\n\u003cli\u003eReconnect every connector in its labelled position, straight and fully seated\u003c\/li\u003e\n\u003cli\u003eRefit the dustproof cover and the upper cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the board sits level with every heavy connector entering straight\u003c\/li\u003e\n\u003cli\u003eCheck no cable is trapped under a cover or pulled tight across an edge\u003c\/li\u003e\n\u003cli\u003eRefit the battery and power up on the ground; confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight\u003c\/li\u003e\n\u003cli\u003eAfter the first working day, lift the cover and look at the connectors again for any sign of heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Whenever the upper cover is lifted, look at how the board sits and how the heavy connectors enter it. A board that has started to tilt is visible in a glance, long before a connector shows heat.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe power distribution board supporting piece is for operators and technicians rebuilding the power area of the Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators whose support cracked, distorted or lost a pin after an impact\u003c\/li\u003e\n\u003cli\u003eTechnicians who found the board tilted or loose when the upper cover was lifted\u003c\/li\u003e\n\u003cli\u003eTechnicians replacing a heat-damaged connector who need the board held square again afterwards\u003c\/li\u003e\n\u003cli\u003eService centres rebuilding the power area after a hard landing\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors and fleet managers stocking power-system hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe board itself has failed or is damaged — the Power Distribution Board Module is a separate part\u003c\/li\u003e\n\u003cli\u003eThe cover over the board is cracked — the Power Distribution Board Upper Cover is a separate part\u003c\/li\u003e\n\u003cli\u003eThe sealing frame around the opening is torn — the Power Distribution Board Dustproof Cover is a separate part\u003c\/li\u003e\n\u003cli\u003eThe support is flat and whole and only the screws are missing or stripped — replace the screws\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this supporting piece is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe supporting piece is the argument for geometry over strength. A support that has been bent by an impact or warped by heat still holds the board. It does not rattle, it does not drop the board, and it passes a casual look. It is still wrong, because it has moved the thing it locates.\u003c\/p\u003e\n\u003cp\u003eOn most brackets that would mean a small misalignment. Under a power distribution board it means something more. Heavy connectors meet the board from several directions, and a board held out of line puts every one of them under a constant side load. Under vibration those connectors fret, work partly out and run hot.\u003c\/p\u003e\n\u003cp\u003eThe fault then appears at a connector or a terminal, often weeks later, and the support that caused it is not suspected because it is still holding the board up.\u003c\/p\u003e\n\u003cp\u003eSo the order is simple. Whenever the board is opened, look at how it sits. If it is tilted or a connector enters at an angle, lift the board and check the support against a flat surface. Replace a support that rocks, has cracked or has lost a pin, and inspect the connectors it was loading.\u003c\/p\u003e\n\u003cp\u003eDone that way, the support is one part replaced early, before it costs a connector, a terminal or a board.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Power Distribution Board Supporting Piece\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Power distribution board supporting piece\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Beneath the power distribution board, carrying it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Carries the power distribution board level and in one fixed position\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical role:\u003c\/strong\u003e None — no current, not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the support you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 supporting piece\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Power distribution board, upper cover, dustproof cover, screws, wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Rectangular plate, stepped lower section, three locating pins\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A distorted support still holds the board but holds it out of line, side-loading every connector on it\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the support is flat and whole and the fault is the board, a connector or the screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM power-system structural support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X PDB support; T60X power board bracket; Talos power distribution board mount; T60X PDB holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the Power Distribution Board Module, not the Power Distribution Board Upper Cover, not the dustproof cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X power distribution board supporting piece\u003c\/p\u003e\n\u003cp\u003eT60X PDB support\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X PDB supporting piece\u003c\/p\u003e\n\u003cp\u003eTalos T60X power board bracket\u003c\/p\u003e\n\u003cp\u003eT60X power distribution board mount\u003c\/p\u003e\n\u003cp\u003eTalos T60X PDB holder\u003c\/p\u003e\n\u003cp\u003eT60X power board support replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X power board tilted\u003c\/p\u003e\n\u003cp\u003eT60X power connector running hot\u003c\/p\u003e\n\u003cp\u003eDJI Talos power board support\u003c\/p\u003e\n\u003cp\u003eTalos T60X grey support plate\u003c\/p\u003e\n\u003cp\u003eT60X power distribution board bracket\u003c\/p\u003e\n\u003cp\u003eTalos T60X PDB support pins\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X power system support\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Power Distribution Board Supporting Piece\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Power Distribution Board Supporting Piece\u003c\/p\u003e\n\u003cp\u003eTalos T60X power distribution board supporting piece replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X power system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X frame hardware\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone power board parts\u003c\/p\u003e\n\u003cp\u003espray drone frame hardware replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Power Distribution Board Supporting Piece Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X power distribution board supporting piece?\u003c\/strong\u003e The grey structural support that carries the power distribution board in its position. It holds the board level and still; it carries no current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the power distribution board included?\u003c\/strong\u003e No. This is the supporting piece only. The Power Distribution Board Module is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the supporting piece, the upper cover and the dustproof cover?\u003c\/strong\u003e The supporting piece carries the board from beneath. The Power Distribution Board Upper Cover closes over the top of it. The dustproof cover is the sealing frame around an opening. They are three separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy support is bent but still holds the board. Does it matter?\u003c\/strong\u003e Yes. A bent support holds the board out of line, and every heavy connector meeting the board then carries a constant side load. Under vibration that leads to fretting and heat at the connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new support fix my power fault?\u003c\/strong\u003e Not on its own. The support carries no current. If a connector or terminal has already been damaged, that needs attention as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the three pins for?\u003c\/strong\u003e They locate the board on the support so it sits in one exact place. A bent or missing pin lets the board shift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check whether my support is distorted?\u003c\/strong\u003e Lift the board and lay the support on a flat surface or put a straight edge across it. It should lie flat with no rocking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. Reuse the aircraft's screws if they are sound, and renew any that are stripped or corroded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e A technician comfortable working in the power area can. Remove the battery, photograph and label every connector, lift the board, replace the support, and reconnect everything straight and fully seated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the screws?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the support is held flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I check anything else while the board is out?\u003c\/strong\u003e Yes. Look at every connector and terminal for discoloration or heat marks, and at the heavy cables for chafe where they meet the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. It is replaced when it is damaged or distorted, and looked at whenever the upper cover is lifted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM power-system structural support, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68055415554368,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-power-distribution-board-supporting-piece-1.png?v=1794094883","url":"https:\/\/aresacres.com\/products\/dji-talos-t60x-oem-power-distribution-board-supporting-piece","provider":"Ares Acres","version":"1.0","type":"link"}