{"product_id":"dji-talos-t60x-oem-power-distribution-board-upper-cover","title":"DJI Talos T60X OEM Power Distribution Board Upper Cover","description":"\u003cp\u003eThe DJI Talos T60X OEM Power Distribution Board Upper Cover is the grey moulded cover that closes over the top of the power distribution board on the Talos T60X. As the supplier photograph shows, it is a wide, one-piece grey moulding with a raised central section carrying a large oval opening and rectangular openings, fixing holes along its upper edge, small pegs at each end, and a downward leg at each outer corner. It is a power-system cover rather than an electrical part: it carries no current, but it shields the board that distributes power through the aircraft from spray, wash water, debris and hands. It is listed by the supplier for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X PDB cover, power board cover or upper cover after it has been cracked in a hard landing, after a fixing point has broken, or after the original was damaged when the board underneath was serviced.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eListed by the supplier for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by outline, openings, fixing holes and end pegs against the cover you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM power-system cover, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old cover from above, with its openings and fixing points visible, settles the match.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Power Distribution Board Upper Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne cover, supplied on its own.\u003c\/strong\u003e It is the upper cover only. It is not a power distribution board, not a lower cover or housing, and not a shell set.\u003c\/p\u003e\n\u003cp\u003eNot included: the power distribution board, any lower cover or housing, screws, seals, gaskets, cable ties or any shell part around the cover. Those are separate parts. If the old screws were stripped or a seal was torn, replace them alongside the cover.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the cover itself and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe power distribution board takes power from the battery side of the aircraft and distributes it to the systems that use it. It is one of the most important electrical assemblies on the aircraft, and it is exposed by nature, because heavy wiring has to reach it. The upper cover is what closes it in.\u003c\/p\u003e\n\u003cp\u003eOn the Talos T60X the cover is a wide grey moulding, as the supplier photograph shows. Its raised central section carries a large oval opening and rectangular openings, which give wiring and connectors their way through or let the parts beneath be reached, while the wide flat wings either side close over the rest of the area. Fixing holes run along its upper edge, small pegs stand at each end, and a downward leg at each outer corner locates it on the structure below.\u003c\/p\u003e\n\u003cp\u003eThose openings matter for fitting. Each one lines up with something underneath. A cover from another position or another aircraft might look similar in outline and still put a solid wall where a connector needs to pass, which is why the match is made on openings and fixing points, not on outline alone.\u003c\/p\u003e\n\u003cp\u003eWhat the cover lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray mist and fertiliser residue settling on the aircraft\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system on every flight\u003c\/li\u003e\n\u003cli\u003eImpacts in hard landings and when the aircraft is transported\u003c\/li\u003e\n\u003cli\u003eBeing removed and refitted whenever the board underneath is inspected or serviced\u003c\/li\u003e\n\u003cli\u003eTools and parts set down on it during other work\u003c\/li\u003e\n\u003cli\u003eSunlight on the moulding through a long season outdoors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is almost always mechanical: a crack across the moulding, a broken fixing point, a snapped peg or leg, or a cover distorted so it no longer sits flat. All of these are visible, which makes the cover one of the easiest parts on the aircraft to judge.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe cover's engineering role is to close the power distribution board in while leaving the openings it needs. It does that in four ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding\u003c\/strong\u003e — it puts a solid moulded wall over the board against spray, wash water, dust and debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuarding\u003c\/strong\u003e — it keeps hands, tools and loose parts off the board and its connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating\u003c\/strong\u003e — its legs, pegs and fixing points hold it in one position over the board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening\u003c\/strong\u003e — its central openings line up with what must pass through or be reached\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe cover has no electrical role at all. It carries no current, it is not part of any circuit, and the aircraft has no sensor watching it. It protects the board; it cannot change how the board behaves.\u003c\/p\u003e\n\u003cp\u003eWhat the power distribution board upper cover does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not repair a power distribution board that has failed\u003c\/li\u003e\n\u003cli\u003eIt does not cure a power fault, a warning or a system that will not power up\u003c\/li\u003e\n\u003cli\u003eIt does not replace a lower cover, a housing or a shell around it\u003c\/li\u003e\n\u003cli\u003eIt does not seal on its own if its seals or gaskets are torn or missing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a cracked cover is a reason to inspect the board, not proof the board is fine\u003c\/h2\u003e\n\u003cp\u003eA cover is the simplest part to diagnose. If it is cracked, broken at a fixing point, missing a peg or leg, or no longer sits flat, it needs replacing. There is no hidden failure mode in a moulded cover.\u003c\/p\u003e\n\u003cp\u003eThe diagnostic question that matters is the one underneath it. A cover that has been cracked has been open to spray and wash water for as long as the crack has been there, and an impact that broke the cover may also have loaded the board below it. Replacing the cover without lifting it closes in whatever has already happened to the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore the new cover goes on, inspect the board:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith the aircraft powered down and the battery removed, lift the old cover and look at the board beneath it\u003c\/li\u003e\n\u003cli\u003eLook for residue, moisture, white or green corrosion and dried spray on the board and its connections\u003c\/li\u003e\n\u003cli\u003eLook for discoloured, scorched or melted areas around connectors and terminals\u003c\/li\u003e\n\u003cli\u003eCheck every connector on the board is fully seated and every fastener is present\u003c\/li\u003e\n\u003cli\u003eCheck the wiring that passes through the cover's openings for chafe where it met the old cover's edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the cover can and cannot explain:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cracked or broken cover explains residue or moisture on the board beneath it\u003c\/li\u003e\n\u003cli\u003eA cracked or broken cover does not explain a power fault on its own — a fault means the board, its connections or the wiring need inspection\u003c\/li\u003e\n\u003cli\u003eA power fault with an intact cover is not a reason to replace the cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLook under the cover first, while that information is still cheap. The board is already exposed when the old cover comes off, and that is the moment to find corrosion before it becomes a fault.\u003c\/p\u003e\n\u003cp\u003eWhen the board is clean and sound, the new cover is the whole repair. When it is not, the board needs attention first, and the cover goes on afterwards to keep it that way.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the power distribution board upper cover when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack anywhere in the moulding\u003c\/li\u003e\n\u003cli\u003eA broken, torn or elongated fixing hole\u003c\/li\u003e\n\u003cli\u003eA snapped or missing end peg or corner leg\u003c\/li\u003e\n\u003cli\u003eA cover that no longer sits flat or leaves a gap at its edges\u003c\/li\u003e\n\u003cli\u003eA broken edge at one of the central openings\u003c\/li\u003e\n\u003cli\u003eResidue or moisture found on the board beneath a damaged cover\u003c\/li\u003e\n\u003cli\u003eAny hard landing or impact that struck the cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they are found when the cover comes off:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe power distribution board and its connections\u003c\/li\u003e\n\u003cli\u003eThe wiring that passes through the cover's openings\u003c\/li\u003e\n\u003cli\u003eSeals, gaskets and fasteners that hold the cover\u003c\/li\u003e\n\u003cli\u003eShell parts next to the cover that took the same impact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the cover. It is replaced when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Power Distribution Board Upper Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power system — power distribution board protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Upper cover (single moulded component)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey, as shown in the supplier photograph\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Raised central section with a large oval opening and rectangular openings; fixing holes along the upper edge; pegs at each end; a leg at each outer corner, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — the cover carries no current and is not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Over the top of the power distribution board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Located by its legs and pegs and fixed through its fixing holes with the aircraft's own screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws, seals and gaskets are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the cover is intact and sits flat or it does not, with no adjustment that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM power-system cover\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eRinse and dry the area around the cover so residue does not fall onto the board when the cover comes off\u003c\/li\u003e\n\u003cli\u003ePhotograph the cover in place from above, showing its fixing points and what passes through its openings\u003c\/li\u003e\n\u003cli\u003eCompare the new cover with the old one: outline, openings, fixing holes, pegs and legs\u003c\/li\u003e\n\u003cli\u003eHave replacement screws ready if the old ones are stripped or corroded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the fixing screws and keep them in order\u003c\/li\u003e\n\u003cli\u003eLift the old cover straight off without levering against the board or pulling on any wiring\u003c\/li\u003e\n\u003cli\u003eInspect the power distribution board and its connections for residue, moisture, corrosion and heat marks before anything else\u003c\/li\u003e\n\u003cli\u003eCheck every connector on the board is fully seated\u003c\/li\u003e\n\u003cli\u003eClean the seating surfaces and refit or renew any seal or gasket\u003c\/li\u003e\n\u003cli\u003eLower the new cover into place, locating its legs and pegs, with every wire and connector passing through its own opening\u003c\/li\u003e\n\u003cli\u003eFit the screws evenly; DJI does not publish a torque figure for them, so stop when the cover is held flat and do not over-tighten into the moulding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the cover sits flat with no gap at its edges and no wire trapped under it\u003c\/li\u003e\n\u003cli\u003eCheck nothing passing through the openings is pressed against an edge\u003c\/li\u003e\n\u003cli\u003eRefit the battery and power up on the ground; confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight\u003c\/li\u003e\n\u003cli\u003eRecord the replacement and the condition of the board you found in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e When the aircraft is washed down, look over the cover for new cracks and check the screws are still tight. Do not aim a pressure washer at the cover's openings. Any time the cover is lifted, take the chance to look at the board beneath it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe power distribution board upper cover is for operators and technicians closing in the power distribution board on the Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators with a cover cracked or broken in a hard landing or in transport\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators whose cover was damaged when the board underneath was serviced\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors keeping aircraft sealed against spray and wash water\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding the power area after an impact\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking shell and cover parts for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe aircraft has a power fault and the cover is intact — the board, its connections or the wiring need inspection; a cover cannot cure it\u003c\/li\u003e\n\u003cli\u003eThe power distribution board itself is damaged or corroded — the board needs attention first; the cover only protects it\u003c\/li\u003e\n\u003cli\u003eOnly the screws or a seal are damaged — replace those on their own\u003c\/li\u003e\n\u003cli\u003eA shell part beside the cover is the damaged one — that is a separate part\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this cover is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe power distribution board upper cover is a plain moulding, and the honest thing to say about it is what it cannot do. It protects the board that distributes power through the aircraft. It does not repair that board, and it will not cure a power fault.\u003c\/p\u003e\n\u003cp\u003eThat matters because a cracked cover and a power fault are often found together after the same impact, and it is tempting to treat the visible damage as the whole story. A new cover over a board that took the same blow, or that has been taking spray through a crack, closes the problem in rather than solving it.\u003c\/p\u003e\n\u003cp\u003eWhere the cover earns its place is prevention. An intact cover keeps spray, wash water, debris and hands off the board, and the board is the expensive part. A cracked cover is open to all of those every day it stays on.\u003c\/p\u003e\n\u003cp\u003eSo the order is simple. Lift the damaged cover, look at the board, deal with anything you find, and close it in with a new cover that sits flat with every opening in line.\u003c\/p\u003e\n\u003cp\u003eDone that way, the cover is the whole repair when the board is sound, and the right last step when it is not.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Power Distribution Board Upper Cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Power distribution board upper cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Power system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Over the top of the power distribution board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Shields the power distribution board from spray, wash water, debris and contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical role:\u003c\/strong\u003e None — no current, not part of any circuit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the cover you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Power distribution board, lower cover or housing, screws, seals, gaskets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Central oval and rectangular openings, upper-edge fixing holes, end pegs, corner legs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A cracked cover is a reason to inspect the board beneath it; a power fault with an intact cover is not a cover fault\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When the fault is a power fault and the cover is intact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM power-system cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X PDB cover; T60X power board cover; Talos power distribution cover; T60X upper cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a power distribution board, not a lower cover, not a front or rear shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X power distribution board cover\u003c\/p\u003e\n\u003cp\u003eT60X PDB cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X PDB upper cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X power board cover\u003c\/p\u003e\n\u003cp\u003eT60X upper cover replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X cracked cover\u003c\/p\u003e\n\u003cp\u003eT60X power distribution board protection\u003c\/p\u003e\n\u003cp\u003eDJI Talos power board cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X grey upper cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X power board upper cover\u003c\/p\u003e\n\u003cp\u003eT60X power distribution cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X PDB cover replacement\u003c\/p\u003e\n\u003cp\u003eT60X power system cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X power distribution board shell\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Power Distribution Board Upper Cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X Power Distribution Board Upper Cover\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Power Distribution Board Upper Cover\u003c\/p\u003e\n\u003cp\u003eTalos T60X power distribution board upper cover replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X power system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X body shells and covers\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone body cover\u003c\/p\u003e\n\u003cp\u003espray drone shell replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Power Distribution Board Upper Cover Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X power distribution board upper cover?\u003c\/strong\u003e The grey moulded cover that closes over the top of the power distribution board. It shields the board; it carries no current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is listed by the supplier for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a new cover fix my power fault?\u003c\/strong\u003e No. The cover protects the board but is not part of any circuit. A power fault needs the board, its connections and the wiring inspected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the power distribution board included?\u003c\/strong\u003e No. This is the upper cover only. The board is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws or seals included?\u003c\/strong\u003e No. Reuse the aircraft's screws if they are sound, and renew any seal or gasket that is torn.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy cover is cracked. Should I check anything else?\u003c\/strong\u003e Yes. Lift it and look at the board beneath for residue, moisture, corrosion and heat marks. A crack has been letting spray and wash water in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the openings in the middle for?\u003c\/strong\u003e They line up with what passes through or must be reached beneath. The match is made on those openings and the fixing points, not on outline alone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a cracked cover?\u003c\/strong\u003e A glued crack keeps flexing under vibration and opens again, and it rarely seals. Replace the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a lower cover or a shell?\u003c\/strong\u003e Neither. It is the upper cover over the power distribution board. Lower covers, housings and shells are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Power down, remove the battery, lift the old cover, inspect the board, then fit the new cover with every opening in line and the screws tightened evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the screws?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the cover is held flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. It is replaced when it is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a cracked cover let water reach the board?\u003c\/strong\u003e Yes. A crack or a broken fixing point is an opening, and spray and wash water find openings. That is why the board is inspected when a damaged cover comes off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to replace the cover after every hard landing?\u003c\/strong\u003e No. Replace it if it is cracked, broken at a fixing point, missing a peg or leg, or no longer sits flat. An undamaged cover stays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM power-system cover, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68048442294592,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-power-distribution-board-upper-cover-1.png?v=1793966917","url":"https:\/\/aresacres.com\/products\/dji-talos-t60x-oem-power-distribution-board-upper-cover","provider":"Ares Acres","version":"1.0","type":"link"}