{"product_id":"dji-talos-t60x-oem-weight-sensor-module","title":"DJI Talos T60X OEM Weight Sensor Module","description":"\u003cp\u003eThe DJI Talos T60X OEM Weight Sensor Module is one of the sensors the Talos T60X uses to weigh the payload it is carrying. As the supplier photograph shows, it is a small, square, dark sensor body with a round metal contact at its centre and moulded markings below it. It is a payload-system part: it sits at a weighing point between the payload and the airframe and reports the load at that point to the aircraft through the weight sensor signal cable. It is listed by the supplier for the Talos T60X and supplied as a single module. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X weight sensor, load sensor or weighing sensor after the payload weight reading has stopped making sense, after a hard landing has loaded the payload area, or after a sensor has been cracked or contaminated during tank or payload work.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Talos T60X Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eListed by the supplier for the Talos T60X\u003c\/li\u003e\n\u003cli\u003eMatched by body shape, contact and markings against the weight sensor you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM payload-system sensor module, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend us a photograph of the label on the part you removed and we will match it before it ships. A clear photograph of the old sensor, taken square-on so its markings are readable, is all the match needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Talos T60X OEM Weight Sensor Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne sensor, one weighing point.\u003c\/strong\u003e The module replaces one sensor at one position. It is not a set for every weighing point on the aircraft.\u003c\/p\u003e\n\u003cp\u003eNot included: the weight sensor signal cable (listed separately as the DJI Talos T60X OEM Weight Sensor Signal Cable), screws, brackets, the spray tank or any payload hardware. Those are separate parts.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears in a photograph. The photograph shows the sensor module itself and nothing else.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe weight sensor is a weighing point. The payload rests on the airframe through it, and the sensor turns the load passing through it into a signal. The aircraft combines the signals from its weighing points into the payload weight it works with.\u003c\/p\u003e\n\u003cp\u003eThat last point is the key to the part. The DJI Talos T60X OEM Weight Sensor Signal Cable is photographed with three sensor-side branches feeding one main connector, which tells you the weighing system reads from more than one point. A single weight sensor module is one of those points, not the whole system.\u003c\/p\u003e\n\u003cp\u003eOn the Talos T60X the module is compact and square, with a round metal contact at its centre where the load is applied and moulded markings on its face, as the supplier photograph shows. It is a precision part that works by sensing very small changes under load, which is why a crack, a contaminated contact or a sensor that has been overloaded in an impact can leave it reading wrong without looking very different.\u003c\/p\u003e\n\u003cp\u003eWhat the weight sensor lives with, over a working season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe full payload load passing through it on every flight\u003c\/li\u003e\n\u003cli\u003eShock loads from hard landings and rough take-offs with a full payload\u003c\/li\u003e\n\u003cli\u003eSpray mixes, fertiliser solutions and their residue in the payload area\u003c\/li\u003e\n\u003cli\u003ePressure washing at the end of a spray day\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system, transmitted through the payload mounts\u003c\/li\u003e\n\u003cli\u003eTank and payload removal, which can knock or lever against the sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat ends its life is usually an impact that overloaded it, a crack in the body, residue packed around the contact, or damage at the cable connection. Some of those are visible. An overload from a single hard landing may not be, which is why the test that matters is a known-weight comparison, not a look.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe weight sensor's engineering role is to report the load at its own weighing point. It does that in three ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarrying\u003c\/strong\u003e — the payload load passes through the sensor's contact at its weighing point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensing\u003c\/strong\u003e — the module turns that load into a signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReporting\u003c\/strong\u003e — the signal travels through its branch of the weight sensor signal cable to the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe aircraft adds the weighing points together. If one sensor reads wrong, the total reads wrong by that sensor's error, and the reading may still look plausible. If every sensor reads wrong together, the cause is almost never several sensors failing at once.\u003c\/p\u003e\n\u003cp\u003eWhat the weight sensor does not do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not report the liquid level in the tank; that is the level sensor's job\u003c\/li\u003e\n\u003cli\u003eIt does not carry its own cable; the signal cable is a separate part\u003c\/li\u003e\n\u003cli\u003eIt does not cure a weighing fault that comes from the signal cable, the main connector or the aircraft-side socket\u003c\/li\u003e\n\u003cli\u003eIt does not replace the other sensors at the other weighing points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — find which weighing point is wrong before you replace any of them\u003c\/h2\u003e\n\u003cp\u003eA wrong payload weight is a system symptom. The aircraft reads from more than one weighing point and reports a total, so the question is never simply whether the weight sensor has failed. The question is which sensor, or whether it is a sensor at all.\u003c\/p\u003e\n\u003cp\u003eThat matters because the honest answer is often not this module. A wrong total can come from one sensor, from the signal cable they share, from a connector that is not fully seated, or from a payload that is resting on something other than its weighing points. Replacing a sensor that is reading correctly does not move the total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStart with a known weight:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmpty and rinse the tank and note the reading with nothing in it\u003c\/li\u003e\n\u003cli\u003eAdd a known quantity of clean water and note the change in the reading\u003c\/li\u003e\n\u003cli\u003eAdd a second known quantity and confirm the reading changes by the same step\u003c\/li\u003e\n\u003cli\u003eA reading that changes by the right amount each time is a weighing system that works; a reading that changes by the wrong amount, or not at all, is a fault to localise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLocalise the fault:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the payload rests only on its weighing points and is not fouled on the frame, a shell or a cable\u003c\/li\u003e\n\u003cli\u003eInspect each sensor for cracks, residue around the contact and damage at its cable connection\u003c\/li\u003e\n\u003cli\u003eInspect each branch of the weight sensor signal cable and reseat every connector\u003c\/li\u003e\n\u003cli\u003eIf one weighing point is suspect, swap its sensor with a sensor from another position and see whether the error moves with it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSigns that point away from a single sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery weighing reading is missing at once — look at the signal cable's trunk and main connector first\u003c\/li\u003e\n\u003cli\u003eThe error appeared after work on the payload area and the payload is touching the frame — free the payload\u003c\/li\u003e\n\u003cli\u003eThe error does not move when the sensors are swapped between positions — the sensor is not the fault\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo the known-weight test and the swap first, while that information is still cheap. They cost a tank of water and a few minutes, and they decide whether you need one sensor, a cable, or nothing at all.\u003c\/p\u003e\n\u003cp\u003eWhen one sensor is proven faulty, replace that one. The others have passed the same test and do not need replacing with it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the weight sensor module when inspection or testing confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA crack in the sensor body or around the contact\u003c\/li\u003e\n\u003cli\u003eA contact that is loose, bent, corroded or cannot be cleaned\u003c\/li\u003e\n\u003cli\u003eDamage at the sensor's cable connection\u003c\/li\u003e\n\u003cli\u003eA known-weight test error that moves with the sensor when it is swapped to another position\u003c\/li\u003e\n\u003cli\u003eA sensor that took the impact in a hard landing and now reads differently from before\u003c\/li\u003e\n\u003cli\u003eA reading from one weighing point that is missing while the others are present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these as well, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe weight sensor signal cable, its branches and its main connector\u003c\/li\u003e\n\u003cli\u003eThe payload mounting, to confirm the payload rests only on its weighing points\u003c\/li\u003e\n\u003cli\u003eAny bracket or mount the sensor sits in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the weight sensor. It is replaced when testing shows it is faulty or when it is damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload system — weighing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Weight sensor module (one weighing point)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 sensor module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e Square dark body with a round metal contact at the centre and moulded markings, as photographed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable:\u003c\/strong\u003e Not included; listed separately as the DJI Talos T60X OEM Weight Sensor Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e At a weighing point between the payload and the airframe; compare with the sensor you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Fitted at its weighing point and connected to its branch of the weight sensor signal cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e None — screws, brackets and the signal cable are separate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None at the part — the sensor reads correctly or it does not\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM payload-system sensor module\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty and rinse the tank so the payload area is clean and unloaded\u003c\/li\u003e\n\u003cli\u003eRun the known-weight test and the position swap so you know which sensor you are replacing\u003c\/li\u003e\n\u003cli\u003ePhotograph the sensor in place, showing its orientation and its cable connection\u003c\/li\u003e\n\u003cli\u003eMark the sensor's position so the new one goes back to the same weighing point\u003c\/li\u003e\n\u003cli\u003eCompare the new sensor with the old one: body shape, contact and markings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnload the weighing point so the sensor is free of the payload before you release it\u003c\/li\u003e\n\u003cli\u003eDisconnect the sensor from its branch of the signal cable by the connector body, never by the lead\u003c\/li\u003e\n\u003cli\u003eRelease the sensor from its position and note which way its contact faced\u003c\/li\u003e\n\u003cli\u003eClean the seat the sensor sits in and remove any residue or debris\u003c\/li\u003e\n\u003cli\u003eFit the new sensor in the same position and orientation, seated squarely with nothing under it\u003c\/li\u003e\n\u003cli\u003eFit the aircraft's own fixings evenly; DJI does not publish a torque figure for them, so do not over-tighten\u003c\/li\u003e\n\u003cli\u003eReconnect the sensor to its branch and confirm the connection is fully seated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the payload rests on its weighing points and is not touching the frame or a shell\u003c\/li\u003e\n\u003cli\u003ePower up on the ground and confirm there are no warnings on the remote controller\u003c\/li\u003e\n\u003cli\u003eRepeat the known-weight test with clean water and confirm the reading changes by the right amount\u003c\/li\u003e\n\u003cli\u003eHover-test before a working flight\u003c\/li\u003e\n\u003cli\u003eRecord the replacement, the position and the test results in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Rinse the payload area at the end of a spray day so residue does not pack around the sensor contacts. After any hard landing with a full payload, repeat the known-weight test before the next job; it is the only way to catch a sensor that was overloaded without being visibly damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe weight sensor module is for operators and technicians restoring an accurate payload weight on the Talos T60X:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalos T60X operators whose known-weight test has isolated one faulty weighing point\u003c\/li\u003e\n\u003cli\u003eTalos T60X operators with a sensor cracked or damaged in a hard landing\u003c\/li\u003e\n\u003cli\u003eCommercial spray contractors who depend on the payload weight reading through the season\u003c\/li\u003e\n\u003cli\u003eService centres and repair technicians rebuilding payload areas\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking a spare weighing-point sensor for the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery weighing reading is wrong or missing at once — look at the signal cable and its main connector first\u003c\/li\u003e\n\u003cli\u003eThe error does not move when sensors are swapped between positions — the sensor is not the fault\u003c\/li\u003e\n\u003cli\u003eThe payload is fouled on the frame or a shell — free it and test again\u003c\/li\u003e\n\u003cli\u003eYou need the cable as well — the DJI Talos T60X OEM Weight Sensor Signal Cable is a separate part\u003c\/li\u003e\n\u003cli\u003eYou want every weighing point renewed — each sensor is one module; order one per position that has failed\u003c\/li\u003e\n\u003cli\u003eYou fly any aircraft other than the Talos T60X — this sensor is listed for the Talos T60X only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe weight sensor is one point in a system that reads from several. That is the most important thing to know before replacing one: a wrong total does not say which point is wrong, or whether any sensor is wrong at all.\u003c\/p\u003e\n\u003cp\u003eThe honest answer is often that this module is not what you need. A wrong total can come from a fouled payload, a half-seated connector or a damaged cable shared by every sensor. Replacing sensors that pass a known-weight test fixes nothing and leaves the real cause in place.\u003c\/p\u003e\n\u003cp\u003eWhen the test does isolate one weighing point, the repair is small and exact: one sensor, in one position, confirmed by the same test afterwards. That is the right way to buy a weight sensor, and the reason it is supplied singly.\u003c\/p\u003e\n\u003cp\u003eA sensor that took a hard landing and now reads differently is worth replacing even if it looks undamaged. Overload is the failure you cannot see, and a weighing point that is a little wrong is wrong on every flight.\u003c\/p\u003e\n\u003cp\u003eTest, localise, replace the one that failed, and test again. That puts the payload weight back to a number the aircraft and the operator can trust.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Talos\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Listed by the supplier for the Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariant:\u003c\/strong\u003e Talos T60X\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Weight sensor module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Payload system — weighing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e One weighing point between the payload and the airframe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Reports the load at its weighing point to the aircraft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e Not published for this part — matched against the sensor you removed from a photograph of its label\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 sensor module (one weighing point)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Weight sensor signal cable, screws, brackets, payload hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated part:\u003c\/strong\u003e DJI Talos T60X OEM Weight Sensor Signal Cable (separate)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e Square dark body with round metal centre contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions, weight, load rating and electrical values:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e A wrong payload weight is a system symptom; a known-weight test and a position swap identify the faulty sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen not to buy:\u003c\/strong\u003e When every weighing reading fails at once, or the error does not move with the sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical damage:\u003c\/strong\u003e Overload in a hard landing, cracked body, residue at the contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM payload-system sensor module\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T60X weight sensor; T60X load sensor; Talos weighing sensor; T60X payload weight sensor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a liquid level sensor, not the weight sensor signal cable, not a bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eTalos T60X weight sensor\u003c\/p\u003e\n\u003cp\u003eT60X load sensor\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X weighing sensor\u003c\/p\u003e\n\u003cp\u003eTalos T60X payload weight sensor\u003c\/p\u003e\n\u003cp\u003eT60X weight sensor replacement\u003c\/p\u003e\n\u003cp\u003eTalos T60X payload weight wrong\u003c\/p\u003e\n\u003cp\u003eT60X weighing system fault\u003c\/p\u003e\n\u003cp\u003eDJI Talos weight sensor module\u003c\/p\u003e\n\u003cp\u003eTalos T60X load cell\u003c\/p\u003e\n\u003cp\u003eTalos T60X weighing point sensor\u003c\/p\u003e\n\u003cp\u003eT60X payload weighing sensor\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor fault\u003c\/p\u003e\n\u003cp\u003eT60X load sensor replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X payload sensor\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Weight Sensor Module\u003c\/p\u003e\n\u003cp\u003eTalos T60X Weight Sensor Module\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X OEM Weight Sensor Module\u003c\/p\u003e\n\u003cp\u003eTalos T60X weight sensor module replacement\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X payload system parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X sensor modules\u003c\/p\u003e\n\u003cp\u003eDJI Talos OEM parts\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts\u003c\/p\u003e\n\u003cp\u003eagricultural spray drone weight sensor\u003c\/p\u003e\n\u003cp\u003espray drone weighing sensor replacement\u003c\/p\u003e\n\u003cp\u003eagricultural spray aircraft parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI retailer\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X Weight Sensor Module Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos T60X parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Talos parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Talos T60X parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Talos T60X weight sensor module?\u003c\/strong\u003e One of the sensors the aircraft uses to weigh its payload. It sits at one weighing point and reports the load there through the weight sensor signal cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is listed by the supplier for the Talos T60X. The Talos T60X is the only aircraft it is listed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e Send us a photograph of the label on the part you removed and we will match it before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this all the weight sensors on the aircraft?\u003c\/strong\u003e No. It is one sensor for one weighing point. The weighing system reads from more than one point; order one module per position that has failed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy payload weight is wrong. Do I need a new weight sensor?\u003c\/strong\u003e Not necessarily. Run a known-weight test with clean water and swap sensors between positions. Replace a sensor only when the error moves with it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll weight readings disappeared at once. Is it the sensors?\u003c\/strong\u003e Rarely. Look at what they share first: the signal cable's trunk, its main connector and the aircraft-side socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable included?\u003c\/strong\u003e No. The DJI Talos T60X OEM Weight Sensor Signal Cable is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I do a known-weight test?\u003c\/strong\u003e Empty and rinse the tank, note the reading, add a known quantity of clean water, and check that the reading changes by the right amount. Repeat with a second quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a weight sensor fail without looking damaged?\u003c\/strong\u003e Yes. A sensor overloaded in a hard landing can read wrong with no visible mark. The known-weight test is how you find it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it measure the liquid level?\u003c\/strong\u003e No. The liquid level is reported by the level sensor. The weight sensor measures load at its weighing point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan something other than a sensor make the weight read wrong?\u003c\/strong\u003e Yes. A payload fouled on the frame or a shell, a half-seated connector or a damaged signal cable all change the reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most technicians can. Unload the weighing point, fit the new sensor in the same position and orientation, reconnect it, and repeat the known-weight test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the fixings?\u003c\/strong\u003e DJI does not publish one for this part. Tighten evenly and stop when the sensor is held firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No published interval. Test after hard landings and replace a sensor when testing shows it is faulty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace all the weight sensors together?\u003c\/strong\u003e No. Replace the one the known-weight test and the position swap prove faulty. The others have passed the same test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine DJI part?\u003c\/strong\u003e Yes. It is a genuine DJI OEM payload-system sensor module, brand new.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"Talos T60X","offer_id":68048433807680,"sku":null,"price":68.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-talos-t60x-oem-weight-sensor-module-1.png?v=1793966952","url":"https:\/\/aresacres.com\/products\/dji-talos-t60x-oem-weight-sensor-module","provider":"Ares Acres","version":"1.0","type":"link"}