{"product_id":"xag-p100-oem-front-rack","title":"XAG P100 OEM Front Rack","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P100 OEM Front Rack\u003c\/strong\u003e, XAG part number 02-002-09969, is the front rack of the airframe on the original XAG P100 agricultural drone. It is a structural member at the front of the aircraft, held at its ends by front rack brackets, that ties the forward structure together and gives forward-mounted parts a rigid base. Operators reach it through searches such as P100 front rack, XAG P100 front frame, P100 front structure bent, or XAG P100 front rack replacement.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P100 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eFitted at the front of the airframe of the original XAG P100 (2022); not confirmed for the P100 Pro\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 02-002-09969 and by length, ends and mounting points against the rack you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM structural member, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × XAG P100 front rack, XAG part number 02-002-09969\u003c\/li\u003e\n\u003cli\u003eThe rack as XAG supplies it under this part number\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the front rack brackets, including the left bracket (02-001-07999), the front hood rack (02-001-08076), the fuselage front compartment frame (02-001-08157), or fasteners.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe front of a P100 carries a cluster of parts that need a stable base: the forward structure, sensors, covers and the parts that tie the nose to the rest of the aircraft. The front rack is one of the members that holds that cluster together. It spans the front of the airframe and is held at each end by its brackets, so it forms a cross-member that keeps the forward structure square.\u003c\/p\u003e\n\u003cp\u003eA cross-member like this has one characteristic that matters more than any other: symmetry. It is held at two ends by two brackets, and it is designed to sit level and square between them. When it is straight and both brackets are sound, everything mounted near it sits where it should. When it is bent, or when one of its brackets has moved, the front of the aircraft is no longer square, and the parts around it inherit the error.\u003c\/p\u003e\n\u003cp\u003eThe front of the aircraft is also where impacts happen. Nose strikes, low passes into crop, tip-overs on landing and knocks during transport all arrive here first. A front rack can absorb a surprising amount of that before it bends, and when it does bend, it often does so without any obvious crack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e Across the front of the airframe, between the front rack brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The front rack brackets at each end and, through them, the forward structure of the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Nose strikes, tip-overs and hard nose-down landings. Transport knocks. Vibration loosening its fasteners. Corrosion where moisture collects at its ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not the front hood rack (02-001-08076), which supports the nose cover, and not the fuselage front compartment frame (02-001-08157). It is not either of the front rack brackets.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe front rack ties the forward airframe together as a square, rigid structure between its two brackets.\u003c\/p\u003e\n\u003cp\u003eA sound front rack provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA rigid cross-member at the front of the airframe\u003c\/li\u003e\n\u003cli\u003eSquare, symmetrical forward structure\u003c\/li\u003e\n\u003cli\u003eA stable base for forward-mounted parts\u003c\/li\u003e\n\u003cli\u003eLoad paths for nose impacts into the main structure\u003c\/li\u003e\n\u003cli\u003eResistance to the forward structure twisting under vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLike most structural members, its value is geometric as much as mechanical. It is there to keep the front of the aircraft the shape it was designed to be.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a front structure that is not square shows it on one side\u003c\/h2\u003e\n\u003cp\u003eBecause the front rack is held at two ends, damage to it almost always shows up as asymmetry. The aircraft's front looks or behaves differently on one side than the other. A cover fits on the left but not the right. A bracket on one side is stressed and the other is not. Something mounted at the front sits slightly off-centre.\u003c\/p\u003e\n\u003cp\u003eThe diagnosis compares the two sides.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight across the front.\u003c\/strong\u003e With the aircraft level, look across the front of the airframe from directly in front. A bent rack sits lower on one side, bows in the middle, or meets its brackets at different angles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare the brackets.\u003c\/strong\u003e Look at both front rack brackets. If one is cracked, bent or loose and the other is not, the rack may be sound and the bracket the problem — or a bent rack may have overloaded that bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the fit of nearby covers.\u003c\/strong\u003e Covers and the hood that fit on one side and not the other point at the forward structure being out of square.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLook for stress marks.\u003c\/strong\u003e White stress lines, kinks or flattening along the rack show where it has bent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the fasteners.\u003c\/strong\u003e A rack that has loosened at one end lets the front of the aircraft move under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemember the history.\u003c\/strong\u003e Any nose strike, tip-over or hard nose-down landing is a reason to inspect the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph the front from directly ahead.\u003c\/strong\u003e Send us the photograph if you want the match confirmed; asymmetry is easy to see in a straight-on picture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the rack is bent, replace it. If it is straight and one bracket has failed, replace the bracket. If both have been stressed by the same impact, replace both.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eFront rack replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA bent, bowed or twisted front rack\u003c\/li\u003e\n\u003cli\u003eStress whitening, kinks or flattening along the rack\u003c\/li\u003e\n\u003cli\u003eThe front structure visibly out of square from directly ahead\u003c\/li\u003e\n\u003cli\u003eCovers or the hood fitting differently on left and right\u003c\/li\u003e\n\u003cli\u003eOne front rack bracket overloaded or cracked by a bent rack\u003c\/li\u003e\n\u003cli\u003eLoose or damaged mounting points at the rack ends\u003c\/li\u003e\n\u003cli\u003eDamage after a nose strike, tip-over or nose-down landing\u003c\/li\u003e\n\u003cli\u003eCorrosion at the rack ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese come from the front's exposure to impacts and from vibration and moisture over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not front-rack symptoms, and this part will not fix them.\u003c\/strong\u003e A cracked bracket on a straight rack is the bracket. A hood that will not close evenly may be the hood rack. Damage deeper in the nose may be the front compartment frame. A bent radar mount is the radar bracket. None of those is the front rack.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P100 OEM Front Rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-002-09969\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P100 (2022, original P100)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P100 Pro\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Airframe, forward structure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Front structural cross-member (rack)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Across the front of the airframe, between the front rack brackets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Ties the forward structure together and keeps it square\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeld by:\u003c\/strong\u003e Front rack brackets, including the left bracket 02-001-07999 (sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 × rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial, length and weight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Direct replacement between the existing brackets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — a bent rack should be replaced, not straightened\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM structural member\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and power the aircraft down\u003c\/li\u003e\n\u003cli\u003eConfirm the old rack carries XAG part number 02-002-09969\u003c\/li\u003e\n\u003cli\u003ePhotograph the front of the aircraft from directly ahead and from each side\u003c\/li\u003e\n\u003cli\u003eInspect both front rack brackets for cracks and bends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove covers needed for access without levering against electronics\u003c\/li\u003e\n\u003cli\u003eRemove the old rack and inspect the bracket mounting points\u003c\/li\u003e\n\u003cli\u003eFit the new rack and tighten both ends evenly, alternating sides\u003c\/li\u003e\n\u003cli\u003eReplace any bracket that was overloaded by the old, bent rack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSight across the front and confirm it is level and square\u003c\/li\u003e\n\u003cli\u003eRefit covers and the hood and confirm they fit evenly on both sides\u003c\/li\u003e\n\u003cli\u003eHover briefly and check for rattles from the front\u003c\/li\u003e\n\u003cli\u003eInspect the rack and brackets after any nose contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe front rack is a structural repair part for aircraft that have taken a knock at the front.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P100 operators repairing after a nose strike or tip-over\u003c\/li\u003e\n\u003cli\u003eAerial applicators flying low over tall crop and near obstacles\u003c\/li\u003e\n\u003cli\u003eCrews transporting aircraft daily\u003c\/li\u003e\n\u003cli\u003eCustom application contractors on rough sites\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres doing structural repairs on XAG aircraft\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e the rack is straight and only one bracket has failed, or if the problem is the hood rack or the front compartment frame. Sight across the front first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your rack; this one is identified for the original P100.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe front rack keeps the front of the aircraft square, and everything at the front depends on that. Covers seal only when they sit on square structure. Sensors point where they should only when their mounts are true. Brackets share load evenly only when the member between them is straight.\u003c\/p\u003e\n\u003cp\u003eA bent rack does not usually stop the aircraft. It shifts the front slightly out of shape and passes that error on to everything nearby, where it appears as small, separate problems: a cover that will not close, a bracket that keeps cracking, a sensor that seems slightly off. Correcting the rack corrects the shape, and the small problems often disappear with it.\u003c\/p\u003e\n\u003cp\u003eIt also matters for the next impact. A rack that has already bent has used up some of its ability to absorb a knock. A new one restores that margin for the front of the aircraft, which is where knocks arrive.\u003c\/p\u003e\n\u003cp\u003eA straight front rack restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA square, symmetrical forward structure\u003c\/li\u003e\n\u003cli\u003eEven loading of both front rack brackets\u003c\/li\u003e\n\u003cli\u003eCovers and the hood fitting evenly on both sides\u003c\/li\u003e\n\u003cli\u003eA stable base for forward-mounted parts\u003c\/li\u003e\n\u003cli\u003eFull impact margin at the front of the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P100 OEM Front Rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-002-09969\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Front structural cross-member (rack)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Frame and airframe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P100 (2022, original P100)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P100 Pro\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Across the front of the airframe, between the front rack brackets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Tying the forward structure together and keeping it square\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeld by:\u003c\/strong\u003e Front rack brackets, including the left bracket 02-001-07999\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure mode:\u003c\/strong\u003e Bending or twisting after a front impact, producing asymmetry\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e Sight across the front from directly ahead; one-sided differences point at the rack or one of its brackets\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Nose strikes, tip-overs, nose-down landings, transport knocks, loosened fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 × rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Front rack brackets, front hood rack 02-001-08076, front compartment frame 02-001-08157, fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 02-002-09969 plus length, ends and mounting points against the removed rack\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e Level, square front; covers fitting evenly; no rattle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM structural member\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P100 front rack\u003c\/p\u003e\n\u003cp\u003eXAG 02-002-09969\u003c\/p\u003e\n\u003cp\u003e02-002-09969 front rack\u003c\/p\u003e\n\u003cp\u003eXAG P100 OEM front rack\u003c\/p\u003e\n\u003cp\u003eP100 front rack replacement\u003c\/p\u003e\n\u003cp\u003eXAG P100 front frame\u003c\/p\u003e\n\u003cp\u003eXAG P100 front structure bent\u003c\/p\u003e\n\u003cp\u003eXAG P100 front cross member\u003c\/p\u003e\n\u003cp\u003eP100 nose structure repair\u003c\/p\u003e\n\u003cp\u003eXAG P100 forward frame\u003c\/p\u003e\n\u003cp\u003eXAG P100 airframe parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 frame parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P100 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P100 front rack Canada\u003c\/p\u003e\n\u003cp\u003eXAG P100 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P100 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P100 front rack?\u003c\/strong\u003e It is the front structural cross-member of the original P100's airframe, XAG part number 02-002-09969, held at its ends by the front rack brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The original XAG P100 (2022). It is not confirmed for the P100 Pro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the front hood rack?\u003c\/strong\u003e No. The front hood rack, 02-001-08076, supports the nose cover. The front rack is a structural cross-member.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the brackets?\u003c\/strong\u003e No. The front rack brackets, including the left bracket 02-001-07999, are separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know the front rack is bent?\u003c\/strong\u003e Look across the front of the aircraft from directly ahead. A bent rack sits lower on one side, bows, or meets its brackets at different angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne bracket keeps cracking. Could the rack be the cause?\u003c\/strong\u003e Yes. A bent rack can overload one bracket. Check the rack whenever a bracket fails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy hood fits on one side but not the other. Is it the front rack?\u003c\/strong\u003e It may be. An out-of-square front structure affects how covers and the hood fit. Also check the hood rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I straighten a bent rack?\u003c\/strong\u003e It is not recommended. A straightened rack is weakened and may not hold its shape. Replace it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, with basic tools. Remove the covers needed for access, fit the new rack and tighten both ends evenly, alternating sides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the repair?\u003c\/strong\u003e Sight across the front for a level, square result, refit covers and confirm they fit evenly, then hover and listen for rattles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually bends the front rack?\u003c\/strong\u003e Nose strikes, tip-overs, nose-down landings and knocks during transport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace the brackets at the same time?\u003c\/strong\u003e Replace any bracket that is cracked, bent or was overloaded by the old rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the front compartment frame?\u003c\/strong\u003e No. The fuselage front compartment frame is XAG part number 02-001-08157.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the aircraft fly with a bent front rack?\u003c\/strong\u003e It may, but the front is out of square and nearby parts carry the error. Replace it at the next opportunity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I inspect it after every nose contact?\u003c\/strong\u003e Yes. It is often the part that absorbs the knock, and it can bend without cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P100 Pro rack fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number on the rack you removed; this one is identified for the original P100.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 02-002-09969, or send us a photograph of the front of the aircraft and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68140337332544,"sku":"02-002-09969","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p100-oem-front-rack-1.png?v=1794885709","url":"https:\/\/aresacres.com\/products\/xag-p100-oem-front-rack","provider":"Ares Acres","version":"1.0","type":"link"}