{"product_id":"xag-p150-oem-3-4-esc-power-supply-cable","title":"XAG P150 OEM 3\u00264 ESC Power Supply Cable","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P150 OEM 3\u0026amp;4 ESC Power Supply Cable\u003c\/strong\u003e, XAG part number 01-027-02864, is the cable that carries battery power to the electronic speed controllers (ESCs) for motors 3 and 4 on the XAG P150 (2024) agricultural drone. Power cables fail differently from signal cables. They carry heavy current, so a poor connection or damaged conductor shows up as heat, and the faults it causes tend to appear under load: on a heavy climb, with a full tank, or late in a long day, rather than at random. Operators reach it through searches such as P150 ESC power cable, XAG P150 3\u0026amp;4 ESC power, P150 motor 3 and 4 shut off, or XAG P150 ESC power supply cable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P150 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eFitted as the power supply cable for the ESCs of motors 3 and 4 on the XAG P150 (2024); not confirmed for the P150 Max\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 01-027-02864 and by connectors and length against the cable you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM power cable, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × XAG P150 3\u0026amp;4 ESC power supply cable, XAG part number 01-027-02864\u003c\/li\u003e\n\u003cli\u003eThe cable as XAG supplies it under this part number\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the ESCs, the 1\u0026amp;2 ESC signal cable (01-027-02863), the ESC power supply cable (01-027-02826), the ESC cable trunking (02-001-10871), the flight battery, cable ties, or tools.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe ESCs that drive the P150's motors need power, and a lot of it. Every bit of thrust the motors produce starts as current drawn from the flight battery and delivered to each ESC through power cables. This cable is the power path to the ESCs of motors 3 and 4.\u003c\/p\u003e\n\u003cp\u003eCarrying heavy current changes how a cable fails. A signal cable with a poor connection loses its signal. A power cable with a poor connection gets hot. Any resistance in the path, whether from a connector that is not fully seated, a corroded contact or a conductor partly broken inside its insulation, turns current into heat. The more current flows, the more heat is produced.\u003c\/p\u003e\n\u003cp\u003eThat is why power cable faults tend to appear under load. On the ground or in a light hover, the cable may carry enough current to work. On a heavy climb, with a full tank, in a strong wind, or late in a long, hot day, the current rises, the weak point heats further, and the supply to the ESCs can sag or drop. Operators see motors 3 and 4 losing power, ESCs reporting voltage problems, or the aircraft struggling to hold height on that side, mostly when the aircraft is working hardest.\u003c\/p\u003e\n\u003cp\u003eHeat leaves evidence. Connectors that have been running hot often show discolouration, melted or distorted housings, or darkened contacts. Insulation near a hot spot may be stiff, brittle or browned. Any of these on this cable is a clear reason to replace it, and to inspect the mating connectors on the ESC side as well, since heat damages both halves of a connection.\u003c\/p\u003e\n\u003cp\u003eBecause one cable powers two ESCs, the pattern is again a clue. Power-related faults on motors 3 and 4 together, with motors 1 and 2 normal, point at the shared power path before either ESC.\u003c\/p\u003e\n\u003cp\u003ePower cables are also damaged by chafe, pinching in housing seams, strain at the arm folds, and corrosion from wash water and residue reaching connectors. All of these increase resistance, and increased resistance means heat.\u003c\/p\u003e\n\u003cp\u003eThe single most important habit with power connections is seating them fully every time. A power connector that is nearly home can work for a while and then fail under load, sometimes damaging itself and its mate in the process.\u003c\/p\u003e\n\u003cp\u003eWhen replacing this cable, route it exactly as the original ran, with slack at the arm folds and clear of edges, and inspect every mating connector for heat damage before connecting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e Along the power path to the ESCs of motors 3 and 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The ESCs of motors 3 and 4 and the power distribution side of the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Heat from poor connections. Corrosion. Chafe. Pinching. Strain at the arm folds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not a signal cable, the ESCs or the 1\u0026amp;2 cable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe 3\u0026amp;4 ESC power supply cable delivers battery power to the ESCs that drive motors 3 and 4.\u003c\/p\u003e\n\u003cp\u003eA sound power supply cable provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA low-resistance power path to both ESCs\u003c\/li\u003e\n\u003cli\u003eFull power to motors 3 and 4 under heavy load\u003c\/li\u003e\n\u003cli\u003eConnections that stay cool at working current\u003c\/li\u003e\n\u003cli\u003eSecure connectors that survive vibration\u003c\/li\u003e\n\u003cli\u003eCorrect routing that allows the arms to fold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts value is in delivering full power when the aircraft needs it most.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — motors 3 and 4 losing power under load: inspect the power cable for heat\u003c\/h2\u003e\n\u003cp\u003ePower faults show up under load and leave heat marks. If motors 3 and 4 struggle when the aircraft works hardest, inspect this cable and its connectors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote when the fault appears.\u003c\/strong\u003e Faults on heavy climbs, full tanks or hot days point at the power path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote which motors are affected.\u003c\/strong\u003e Motors 3 and 4 together, with 1 and 2 normal, point at this shared cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the battery.\u003c\/strong\u003e Confirm the aircraft cannot be powered before handling power connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the connectors for heat.\u003c\/strong\u003e Look for discolouration, melted or distorted housings and darkened contacts on both halves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the insulation.\u003c\/strong\u003e Stiff, brittle or browned insulation near a connector marks a hot spot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrace the cable.\u003c\/strong\u003e Check its whole route for chafe, cuts and crushed sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReseat if undamaged.\u003c\/strong\u003e If there is no heat damage, reseat both ends fully and re-test under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph the damage.\u003c\/strong\u003e Send us a photograph and the XAG part number and we will confirm the match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the cable or its connectors show heat damage, chafe or corrosion, this cable is the part. Replace any heat-damaged mating connector too.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003ePower supply cable replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotors 3 and 4 losing power together under heavy load\u003c\/li\u003e\n\u003cli\u003eESC voltage warnings on motors 3 and 4\u003c\/li\u003e\n\u003cli\u003eDiscoloured, melted or distorted connectors\u003c\/li\u003e\n\u003cli\u003eDarkened or pitted connector contacts\u003c\/li\u003e\n\u003cli\u003eStiff, brittle or browned insulation\u003c\/li\u003e\n\u003cli\u003eChafed, cut or crushed sections of the cable\u003c\/li\u003e\n\u003cli\u003eCorrosion in the connectors\u003c\/li\u003e\n\u003cli\u003eDamage after a crash or arm repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese come from heat at poor connections, corrosion, chafe and strain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not power cable symptoms, and this part will not fix them.\u003c\/strong\u003e A fault on one motor only usually points at that motor's ESC or motor. A signal fault needs the signal cable. A weak flight battery affects all motors. A heat-damaged ESC connector needs its own repair. A new power cable restores the power path; it does not repair a damaged ESC.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P150 OEM 3\u0026amp;4 ESC Power Supply Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 01-027-02864\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Propulsion, ESC power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Power supply cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eServes:\u003c\/strong\u003e ESCs of motors 3 and 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Delivers battery power to the ESCs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated cable:\u003c\/strong\u003e 1\u0026amp;2 ESC signal cable 01-027-02863 (sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 × power supply cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength, gauge and connector types:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Plug-in replacement along the original route\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and confirm the aircraft cannot be powered\u003c\/li\u003e\n\u003cli\u003eConfirm the old cable carries XAG part number 01-027-02864\u003c\/li\u003e\n\u003cli\u003ePhotograph the cable route and both connector ends\u003c\/li\u003e\n\u003cli\u003eInspect every mating connector for heat damage\u003c\/li\u003e\n\u003cli\u003eNote how the cable sits in its trunking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the old cable by its connector bodies, never by pulling on the wires\u003c\/li\u003e\n\u003cli\u003eClean and dry the mating connectors; replace any that are heat-damaged\u003c\/li\u003e\n\u003cli\u003eRoute the new cable exactly as the original ran, seated in its trunking\u003c\/li\u003e\n\u003cli\u003eLeave enough slack for the arms to fold without pulling on the connectors\u003c\/li\u003e\n\u003cli\u003eSeat each power connector fully until it locks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFold and unfold the arms and confirm nothing pulls tight\u003c\/li\u003e\n\u003cli\u003eConfirm no cable is trapped in a housing seam\u003c\/li\u003e\n\u003cli\u003ePower up and confirm both ESCs report normal voltage\u003c\/li\u003e\n\u003cli\u003eFly a loaded test and confirm motors 3 and 4 hold power\u003c\/li\u003e\n\u003cli\u003eAfter the test, feel the connectors with the battery removed; they should not be hot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe 3\u0026amp;4 ESC power supply cable feeds two of the aircraft's motors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P150 operators with motors 3 and 4 losing power under load\u003c\/li\u003e\n\u003cli\u003eTechnicians who found heat-damaged power connectors\u003c\/li\u003e\n\u003cli\u003eCrews repairing cabling after a crash or arm repair\u003c\/li\u003e\n\u003cli\u003eCustom application contractors flying heavy loads in hot conditions\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres doing electrical repairs\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eService centres replace power cables at the first sign of heat damage, because a connection that has started to overheat only gets worse with use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e only one motor is affected, the fault is on motors 1 and 2, or the problem is a weak flight battery affecting all motors. Inspect the connectors for heat and note which motors are affected first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your cable; this one is identified for the P150.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA power cable fault is at its worst exactly when the aircraft needs full power: climbing with a full tank, fighting wind, or working through the hottest part of the day.\u003c\/p\u003e\n\u003cp\u003eHeat is the warning. A connector that has started to discolour or distort is telling the operator that resistance has built up, and that it will get worse. Replacing the cable at that point avoids a failure under load.\u003c\/p\u003e\n\u003cp\u003eReading the pattern matters here too. Power faults on motors 3 and 4 together point at the shared power path first, before either ESC is condemned.\u003c\/p\u003e\n\u003cp\u003eSeating power connectors fully every time, keeping them clean and dry, and routing the cable with slack at the folds prevents most power cable failures.\u003c\/p\u003e\n\u003cp\u003eA quick check of connector temperature after a loaded flight, with the battery removed, catches a developing hot spot early.\u003c\/p\u003e\n\u003cp\u003eFor crews running several aircraft, inspecting power connectors for discolouration at each service is one of the quickest and most valuable electrical checks there is.\u003c\/p\u003e\n\u003cp\u003eA sound 3\u0026amp;4 ESC power supply cable restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull power to motors 3 and 4 under load\u003c\/li\u003e\n\u003cli\u003eCool, low-resistance connections\u003c\/li\u003e\n\u003cli\u003eNormal ESC voltage readings\u003c\/li\u003e\n\u003cli\u003eSteady height holding with heavy loads\u003c\/li\u003e\n\u003cli\u003eProtection of the ESC connectors from heat damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P150 OEM 3\u0026amp;4 ESC Power Supply Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 01-027-02864\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e ESC power supply cable for motors 3 and 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e ESC power cabling\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eServes:\u003c\/strong\u003e ESCs of motors 3 and 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Delivering battery power to the ESCs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure modes:\u003c\/strong\u003e Heat damage at connectors, corrosion, chafe, conductor damage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e Power loss on motors 3 and 4 under heavy load calls for inspecting this cable for heat damage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Part-seated connectors, corrosion, chafe, strain at arm folds\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear driver:\u003c\/strong\u003e Current load and the condition of its connections\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated parts:\u003c\/strong\u003e 1\u0026amp;2 ESC signal cable 01-027-02863, ESC power supply cable 01-027-02826, ESC cable trunking 02-001-10871\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e ESCs, other cables, trunking, battery, cable ties, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 01-027-02864 plus connectors and length against the removed cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e Normal ESC voltage; motors 3 and 4 hold power in a loaded test; connectors not hot afterwards\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspection habit:\u003c\/strong\u003e Check power connectors for discolouration at every service\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P150 3\u0026amp;4 ESC power supply cable\u003c\/p\u003e\n\u003cp\u003eXAG 01-027-02864\u003c\/p\u003e\n\u003cp\u003e01-027-02864 power cable\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM ESC power cable\u003c\/p\u003e\n\u003cp\u003eP150 ESC power cable replacement\u003c\/p\u003e\n\u003cp\u003eXAG P150 ESC power supply cable\u003c\/p\u003e\n\u003cp\u003eXAG P150 motor 3 and 4 shut off\u003c\/p\u003e\n\u003cp\u003eP150 motors losing power under load\u003c\/p\u003e\n\u003cp\u003eXAG P150 melted connector\u003c\/p\u003e\n\u003cp\u003eXAG P150 ESC voltage warning\u003c\/p\u003e\n\u003cp\u003eXAG P150 electrical parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 propulsion parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P150 ESC power cable Canada\u003c\/p\u003e\n\u003cp\u003eXAG P150 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P150 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P150 3\u0026amp;4 ESC power supply cable?\u003c\/strong\u003e It is the cable, XAG part number 01-027-02864, that carries battery power to the ESCs of motors 3 and 4 on the XAG P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The XAG P150 (2024). It is not confirmed for the P150 Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMotors 3 and 4 lose power on heavy climbs. Could it be this cable?\u003c\/strong\u003e Yes. Power faults tend to appear under load. Inspect the cable and its connectors for heat damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does heat damage look like?\u003c\/strong\u003e Discoloured, melted or distorted connector housings, darkened contacts, and stiff or browned insulation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it carry signals?\u003c\/strong\u003e No. It carries power. Signals travel on separate signal cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly motor 3 has a fault. Is it this cable?\u003c\/strong\u003e Less likely. A single-motor fault usually points at that motor's ESC or motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace the ESC connectors too?\u003c\/strong\u003e If they show heat damage, yes. Heat damages both halves of a connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat causes connectors to overheat?\u003c\/strong\u003e Resistance from part-seated connectors, corrosion or damaged conductors, which turns current into heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Photograph the route, inspect the mating connectors, swap the cable and seat each connector fully until it locks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the repair?\u003c\/strong\u003e Confirm normal ESC voltage, fly a loaded test, then with the battery removed confirm the connectors are not hot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length and gauge is it?\u003c\/strong\u003e They are not published for this part. Match against the cable you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the 1\u0026amp;2 cable?\u003c\/strong\u003e No. The 1\u0026amp;2 ESC signal cable is XAG part number 01-027-02863, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I repair a melted connector?\u003c\/strong\u003e Not recommended. Replace the cable and any damaged mating connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P150 Max cable fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number; this one is identified for the P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCould a weak battery cause the same symptom?\u003c\/strong\u003e A weak battery usually affects all motors, not just 3 and 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow often should I check power connectors?\u003c\/strong\u003e At every service, looking for any discolouration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the ESC power supply cable?\u003c\/strong\u003e No. The ESC power supply cable is XAG part number 01-027-02826, a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 01-027-02864, or send us a photograph of the cable and its connectors and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68140458115392,"sku":"01-027-02864","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p150-oem-3-4-esc-power-supply-cable-1.png?v=1794886081","url":"https:\/\/aresacres.com\/products\/xag-p150-oem-3-4-esc-power-supply-cable","provider":"Ares Acres","version":"1.0","type":"link"}