{"product_id":"xag-p150-oem-motor-cable-clip-holder","title":"XAG P150 OEM Motor Cable Clip Holder","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P150 OEM Motor Cable Clip Holder\u003c\/strong\u003e, XAG part number 02-001-07849, is the clip holder that secures the motor cable on the XAG P150 (2024) agricultural drone. Its job is strain relief: holding the cable still where it leaves the motor, so that vibration and movement are taken by the holder rather than by the conductors. Where a holder is broken or missing, the cable flexes at the motor exit with every revolution, and that is exactly where motor cables tend to fail. Operators reach it through searches such as P150 motor cable clip, XAG P150 cable holder, P150 motor wire clip, or XAG P150 motor cable strain relief.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P150 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eFitted at the motor cable of the XAG P150 (2024); not confirmed for the P150 Max\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 02-001-07849 and by shape and mounting points against the holder you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM cable clip holder, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × XAG P150 motor cable clip holder, XAG part number 02-001-07849\u003c\/li\u003e\n\u003cli\u003eThe holder as XAG supplies it under this part number\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the motor, the motor cable, the ESC cable trunking (02-001-10871), the head cable trunking (02-001-10855), fasteners, or tools.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eEvery motor has a cable that carries its drive from the ESC. Where that cable leaves the motor, it passes from a part that vibrates intensely to the structure of the arm. That transition is the most stressed point on the whole cable. Without support, the cable flexes there with every vibration, and repeated flexing fatigues the conductors inside.\u003c\/p\u003e\n\u003cp\u003eThe motor cable clip holder exists to stop that. It clamps the cable firmly at a fixed point, so that the cable between the holder and the motor is short and supported, and the vibration is absorbed by the holder rather than passed along the conductors. This is what engineers call strain relief, and it is one of the simplest and most effective ways to make a cable last.\u003c\/p\u003e\n\u003cp\u003eWhen the holder is sound, the cable leaves the motor in a controlled, gentle curve and stays exactly where it was routed. When the holder is cracked, broken, loose or missing, the cable is free to move. It whips slightly with every revolution, rubs against nearby edges, and bends repeatedly at the motor exit.\u003c\/p\u003e\n\u003cp\u003eThe result is a cable that fails at the motor exit. Conductor strands break one by one inside the insulation, the insulation chafes where it rubs, and eventually the motor develops faults: rough running, a motor that will not start, or intermittent cut-outs. Because the damage is right at the motor, it is easy to blame the motor or ESC instead of the cable and the missing holder that let it fail.\u003c\/p\u003e\n\u003cp\u003eThat is why, whenever a motor cable is found damaged near the motor, the holder should be checked as well. Replacing the cable without restoring the strain relief simply sets the new cable up to fail in the same place.\u003c\/p\u003e\n\u003cp\u003eHolders are damaged by impacts in crashes, by being knocked during handling, by sun and chemical ageing that makes them brittle, and by service work in which they are removed and not refitted, or refitted without the cable properly seated.\u003c\/p\u003e\n\u003cp\u003eChecking the holders is quick. With the battery removed, look at each motor cable where it leaves the motor. The cable should be held firmly and should not move when gently pushed. A cable that moves freely at the motor exit has lost its strain relief.\u003c\/p\u003e\n\u003cp\u003eWhen the holder is replaced, the cable should be seated in it exactly as before, with the same short, supported length between the holder and the motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e At the motor cable, near where it leaves the motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The motor cable it clamps and the structure it mounts to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Crashes. Handling knocks. Sun and chemical ageing. Service removal and poor refitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not the motor cable, the cable trunking or the motor.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe motor cable clip holder clamps the motor cable at a fixed point to relieve strain at the motor exit.\u003c\/p\u003e\n\u003cp\u003eA sound clip holder provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFirm clamping of the motor cable\u003c\/li\u003e\n\u003cli\u003eStrain relief at the motor exit\u003c\/li\u003e\n\u003cli\u003eVibration absorbed by the holder, not the conductors\u003c\/li\u003e\n\u003cli\u003eA controlled, repeatable cable path\u003c\/li\u003e\n\u003cli\u003eProtection from chafe against nearby edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts value is in making motor cables last.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a motor cable damaged at the motor exit: check the holder that should have held it\u003c\/h2\u003e\n\u003cp\u003eMotor cable failures at the motor usually start with lost strain relief. Check the holder whenever the cable is damaged there.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the battery.\u003c\/strong\u003e Confirm the aircraft cannot be powered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLook at each motor cable exit.\u003c\/strong\u003e The cable should be held firmly where it leaves the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush the cable gently.\u003c\/strong\u003e Free movement at the motor exit means the holder has failed or is missing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the holder.\u003c\/strong\u003e Look for cracks, breaks, brittleness and loose mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the cable.\u003c\/strong\u003e Look for chafe, cuts and stiff or kinked sections near the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelate faults to the cable.\u003c\/strong\u003e Rough running or intermittent cut-outs on one motor, with a loose cable, point here.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare with the other motors.\u003c\/strong\u003e A holder that looks different from its neighbours deserves attention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph the damage.\u003c\/strong\u003e Send us a photograph and the XAG part number and we will confirm the match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the holder is cracked, broken, loose or missing, this holder is the part. Replace a damaged motor cable at the same time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eClip holder replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA motor cable that moves freely at the motor exit\u003c\/li\u003e\n\u003cli\u003eA cracked or broken clip holder\u003c\/li\u003e\n\u003cli\u003eA missing clip holder\u003c\/li\u003e\n\u003cli\u003eA holder loose on its mounting\u003c\/li\u003e\n\u003cli\u003eChafe on the motor cable near the motor\u003c\/li\u003e\n\u003cli\u003eA brittle, sun-aged holder\u003c\/li\u003e\n\u003cli\u003eDamage after a crash or handling knock\u003c\/li\u003e\n\u003cli\u003eA holder not refitted after service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese come from crashes, handling, ageing and service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not clip holder symptoms, and this part will not fix them.\u003c\/strong\u003e A motor cable with broken strands or worn insulation needs the cable. A failed motor needs the motor. A failed ESC needs the ESC. Damaged trunking needs the trunking. A new holder restores strain relief; it does not repair a cable already damaged.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P150 OEM Motor Cable Clip Holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-001-07849\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Propulsion, motor cabling\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Cable clip holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e At the motor cable, near the motor exit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Clamps the motor cable for strain relief\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 × clip holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity per aircraft:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial and dimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Direct replacement at the motor cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM cable holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and confirm the aircraft cannot be powered\u003c\/li\u003e\n\u003cli\u003eConfirm the old holder carries XAG part number 02-001-07849\u003c\/li\u003e\n\u003cli\u003ePhotograph the cable path and how the cable sits in the holder\u003c\/li\u003e\n\u003cli\u003eInspect the motor cable for damage near the motor\u003c\/li\u003e\n\u003cli\u003eHave a replacement cable ready if the old one is damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the old holder without pulling on the cable\u003c\/li\u003e\n\u003cli\u003eReplace a damaged motor cable before fitting the new holder\u003c\/li\u003e\n\u003cli\u003eFit the new holder in its original position\u003c\/li\u003e\n\u003cli\u003eSeat the cable fully, with the same short supported length to the motor\u003c\/li\u003e\n\u003cli\u003eStart every fastener by hand and tighten evenly, without overtightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePush the cable gently and confirm it does not move at the motor exit\u003c\/li\u003e\n\u003cli\u003eConfirm the cable is clear of edges and moving parts\u003c\/li\u003e\n\u003cli\u003ePower up and confirm the motor runs normally\u003c\/li\u003e\n\u003cli\u003eCheck holders at every service\u003c\/li\u003e\n\u003cli\u003eRefit holders immediately after any motor work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe motor cable clip holder protects the motor cable at its most stressed point.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P150 operators with a loose motor cable at the motor\u003c\/li\u003e\n\u003cli\u003eTechnicians replacing a motor cable damaged at the motor exit\u003c\/li\u003e\n\u003cli\u003eCrews repairing after a crash\u003c\/li\u003e\n\u003cli\u003eCustom application contractors running high-vibration seasons\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres doing motor work\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eService centres replace the holder whenever they replace a motor cable damaged at the motor, because a new cable without strain relief fails in the same place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e the holder is sound and holding, and the fault is in the motor, the ESC or the cable for another reason. Check the cable at the motor exit and the holder first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your holder; this one is identified for the P150.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe point where a cable leaves a vibrating motor is where it is most likely to fail. The clip holder is what protects that point.\u003c\/p\u003e\n\u003cp\u003eWhen the holder is gone, the damage does not appear at the holder. It appears as a motor fault, and the cable failure behind it is easy to miss. Recognising the pattern saves time spent on motors and ESCs that are not faulty.\u003c\/p\u003e\n\u003cp\u003eA new holder is a small, quick repair. It restores strain relief and protects the cable from the vibration that would otherwise break it.\u003c\/p\u003e\n\u003cp\u003eReplacing a damaged motor cable without restoring the holder sets up the same failure again. Doing both together fixes the cause as well as the result.\u003c\/p\u003e\n\u003cp\u003eChecking each motor cable exit at service, with a gentle push, is one of the quickest inspections on the aircraft.\u003c\/p\u003e\n\u003cp\u003eFor crews running several aircraft, refitting holders immediately after any motor work prevents them being forgotten and lost.\u003c\/p\u003e\n\u003cp\u003eA sound motor cable clip holder restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrain relief at the motor exit\u003c\/li\u003e\n\u003cli\u003eMotor cables held firmly in place\u003c\/li\u003e\n\u003cli\u003eProtection from vibration fatigue\u003c\/li\u003e\n\u003cli\u003eProtection from chafe\u003c\/li\u003e\n\u003cli\u003eLonger motor cable life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P150 OEM Motor Cable Clip Holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 02-001-07849\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Motor cable clip holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Motor cabling\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e At the motor cable, near the motor exit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Clamping the motor cable for strain relief\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure modes:\u003c\/strong\u003e Cracks, breaks, brittleness, loose mounting, loss\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e A motor cable damaged at the motor exit calls for checking its holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Crashes, handling knocks, ageing, service removal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear driver:\u003c\/strong\u003e Vibration and impacts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated parts:\u003c\/strong\u003e ESC cable trunking 02-001-10871, head cable trunking 02-001-10855\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Motor, motor cable, trunking, fasteners, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 02-001-07849 plus shape and mounting points against the removed holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e Cable does not move at the motor exit; clear of edges; motor runs normally\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspection habit:\u003c\/strong\u003e Push each motor cable gently at its exit during service\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM cable holder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P150 motor cable clip holder\u003c\/p\u003e\n\u003cp\u003eXAG 02-001-07849\u003c\/p\u003e\n\u003cp\u003e02-001-07849 cable clip holder\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM cable holder\u003c\/p\u003e\n\u003cp\u003eP150 motor cable clip replacement\u003c\/p\u003e\n\u003cp\u003eXAG P150 motor wire clip\u003c\/p\u003e\n\u003cp\u003eXAG P150 cable holder\u003c\/p\u003e\n\u003cp\u003eXAG P150 motor cable strain relief\u003c\/p\u003e\n\u003cp\u003eP150 motor cable damaged\u003c\/p\u003e\n\u003cp\u003eXAG P150 motor cutting out\u003c\/p\u003e\n\u003cp\u003eXAG P150 motor parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 propulsion parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P150 motor cable clip Canada\u003c\/p\u003e\n\u003cp\u003eXAG P150 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P150 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P150 motor cable clip holder?\u003c\/strong\u003e It is the holder, XAG part number 02-001-07849, that clamps the motor cable near the motor on the XAG P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The XAG P150 (2024). It is not confirmed for the P150 Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does it do?\u003c\/strong\u003e It provides strain relief, holding the cable still where it leaves the vibrating motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy motor cable keeps failing near the motor. Why?\u003c\/strong\u003e The clip holder may be broken or missing, letting the cable flex at the motor exit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the cable?\u003c\/strong\u003e No. The motor cable is a separate part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check it?\u003c\/strong\u003e With the battery removed, push each motor cable gently where it leaves the motor. It should not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace the cable too?\u003c\/strong\u003e If it shows chafe, cuts or stiff sections near the motor, yes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a cable tie instead?\u003c\/strong\u003e Not recommended. A tie does not hold the cable in the designed position and can cause chafe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. Photograph the cable path, fit the holder and seat the cable exactly as before.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the repair?\u003c\/strong\u003e The cable does not move at the motor exit, is clear of edges, and the motor runs normally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with fasteners?\u003c\/strong\u003e No. Reuse sound original fasteners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many holders does the P150 use?\u003c\/strong\u003e The quantity per aircraft is not published for this part. Count them on your aircraft, or send us a photograph and we will confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the cable trunking?\u003c\/strong\u003e No. The ESC cable trunking is 02-001-10871 and the head cable trunking is 02-001-10855, separate parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P150 Max holder fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number; this one is identified for the P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat breaks holders?\u003c\/strong\u003e Crashes, handling knocks, sun ageing and service work where they are not refitted properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I check holders?\u003c\/strong\u003e At every service, and after any motor work or crash.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCould a motor fault be caused by a missing holder?\u003c\/strong\u003e Indirectly. The holder protects the cable; a damaged cable causes the fault.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 02-001-07849, or send us a photograph of the holder and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68140480201024,"sku":"02-001-07849","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p150-oem-motor-cable-clip-holder-1.png?v=1794886139","url":"https:\/\/aresacres.com\/products\/xag-p150-oem-motor-cable-clip-holder","provider":"Ares Acres","version":"1.0","type":"link"}