{"product_id":"xag-p150-oem-nozzle-esc-board","title":"XAG P150 OEM Nozzle ESC Board","description":"\u003cp\u003eThe \u003cstrong\u003eXAG P150 OEM Nozzle ESC Board\u003c\/strong\u003e, XAG part number 14-007-00098, is the ESC board that drives the nozzle motor on the XAG P150 (2024) agricultural drone. ESC stands for electronic speed controller: this board takes power and commands from the aircraft and turns them into the precisely controlled drive the nozzle motor needs. When it fails, a perfectly good nozzle sits still. Operators reach it through searches such as P150 nozzle ESC, XAG P150 nozzle driver board, P150 nozzle not spinning, or XAG P150 nozzle controller.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ XAG P150 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eFitted as the nozzle ESC board of the XAG P150 (2024) application system; not confirmed for the P150 Max\u003c\/li\u003e\n\u003cli\u003eMatched by XAG part number 14-007-00098 and by board outline and connectors against the board you removed\u003c\/li\u003e\n\u003cli\u003eGenuine XAG OEM ESC board, brand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × XAG P150 nozzle ESC board, XAG part number 14-007-00098\u003c\/li\u003e\n\u003cli\u003eThe board as XAG supplies it under this part number\u003c\/li\u003e\n\u003cli\u003eOEM anti-static protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the nozzle (05-002-02065), the board's housing or cover, cables, the propulsion motor ESC parts, or fasteners.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe P150's nozzles are motor-driven. A small motor in each nozzle assembly spins the parts that shape the liquid into spray, and the speed of that motor matters: it is part of how the system controls the spray it produces. A motor like that cannot simply be connected to the battery. It needs a controller that switches power to it in the right sequence and at the right rate, responding to commands from the aircraft. That controller is the nozzle ESC board.\u003c\/p\u003e\n\u003cp\u003eAn ESC board is a power electronics assembly. It handles current, switches it rapidly, and generates heat while doing so. It also communicates with the rest of the aircraft so that it knows when, and how fast, to drive the nozzle. On an agricultural drone it does all of that in a hostile place: close to the spray, exposed to vibration, and subject to temperature swings and wash-down.\u003c\/p\u003e\n\u003cp\u003eESC boards fail in a few characteristic ways. Moisture or chemical residue that reaches the board through a damaged cover can corrode components and connectors. Heat from long, hard working days stresses components over time. A short or fault in the nozzle motor or its wiring can damage the board's output stage. And impacts to the area can crack the board or its solder joints.\u003c\/p\u003e\n\u003cp\u003eThe symptom of a failed nozzle ESC is a nozzle that will not run, runs erratically or reports a fault, while the nozzle itself turns freely and smoothly by hand. That last check is the key one. A nozzle that is rough or seized by hand is a nozzle problem, and fitting a new ESC board to it will not help; worse, a seized motor can damage a new board.\u003c\/p\u003e\n\u003cp\u003eEqually, cables and connectors between the board and the nozzle cause many of the same symptoms. A corroded connector or a broken wire looks exactly like a dead board from the ground. Checking them first is quick and avoids replacing electronics unnecessarily.\u003c\/p\u003e\n\u003cp\u003eThe diagnostic sequence is therefore: confirm the nozzle turns freely, check the cable and connectors, look for visible damage or moisture on the board, and only then replace the board.\u003c\/p\u003e\n\u003cp\u003eWhen a new board is fitted, protecting it is part of the repair. A cracked cover or missing seal that let moisture reach the old board will do the same to the new one, so the enclosure deserves as much attention as the electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere it sits.\u003c\/strong\u003e On the P150 application system, connected to its nozzle motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it connects to.\u003c\/strong\u003e The nozzle motor on one side and the aircraft's power and command wiring on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wears it out.\u003c\/strong\u003e Moisture and residue through damaged covers. Heat. Faults in the nozzle motor or wiring. Impacts. Vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this part is not.\u003c\/strong\u003e It is not the nozzle, the propulsion motor ESCs, the cables or the cover.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe nozzle ESC board drives the P150 nozzle motor under command from the aircraft.\u003c\/p\u003e\n\u003cp\u003eA sound nozzle ESC board provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControlled drive power to the nozzle motor\u003c\/li\u003e\n\u003cli\u003eCorrect response to the aircraft's nozzle commands\u003c\/li\u003e\n\u003cli\u003eSmooth, consistent nozzle running\u003c\/li\u003e\n\u003cli\u003eFault reporting to the aircraft\u003c\/li\u003e\n\u003cli\u003eReliable operation through long working days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts value is in control. A healthy nozzle only runs as well as the board driving it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a nozzle that turns freely but will not run points at the drive, not the nozzle\u003c\/h2\u003e\n\u003cp\u003eSeparate the nozzle, its wiring and its board before replacing anything.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn the nozzle by hand.\u003c\/strong\u003e With the aircraft powered down, turn the affected nozzle gently. If it is rough, tight or seized, the nozzle is the problem. Fix that first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare with other positions.\u003c\/strong\u003e If one nozzle will not run and the others do, focus on that position's drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck cable and connectors.\u003c\/strong\u003e Look for corrosion, bent pins, loose connections and damaged insulation between board and nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the board.\u003c\/strong\u003e With its cover removed, look for moisture, residue, corrosion, burnt components or cracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the cover.\u003c\/strong\u003e A cracked cover or missing seal explains moisture damage and must be fixed with the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote fault messages.\u003c\/strong\u003e Nozzle or ESC faults reported by the aircraft help confirm the drive is the cause.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotograph the board.\u003c\/strong\u003e Send us a photograph and the XAG part number and we will confirm the match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the nozzle turns freely, the wiring is sound and the board is damaged, corroded or the drive still fails, this board is the part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eNozzle ESC board replacement is the likely answer when an operator or technician observes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA nozzle that turns freely by hand but will not run under power\u003c\/li\u003e\n\u003cli\u003eA nozzle that runs erratically with sound wiring\u003c\/li\u003e\n\u003cli\u003eNozzle drive faults reported by the aircraft\u003c\/li\u003e\n\u003cli\u003eCorrosion, residue or moisture damage on the board\u003c\/li\u003e\n\u003cli\u003eBurnt components or heat marks on the board\u003c\/li\u003e\n\u003cli\u003eA cracked board after an impact\u003c\/li\u003e\n\u003cli\u003eA board damaged after a nozzle motor seized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese come from moisture, heat, motor and wiring faults, impacts and vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are not ESC board symptoms, and this part will not fix them.\u003c\/strong\u003e A nozzle that is rough or seized by hand is the nozzle. A broken cable or corroded connector is the wiring. A cracked cover needs the cover. A propulsion motor fault involves the propulsion ESCs, not this board. A new board restores nozzle drive; it does not repair the nozzle or wiring.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e XAG P150 OEM Nozzle ESC Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 14-007-00098\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Application system, nozzle drive\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Electronic speed controller board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrives:\u003c\/strong\u003e Nozzle 05-002-02065 motor (sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e On the application system, connected to the nozzle motor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent rating and firmware:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectors:\u003c\/strong\u003e Not published for this part; match against the board you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 × board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Direct replacement\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Genuine XAG OEM ESC board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the flight battery and confirm the aircraft is fully powered down\u003c\/li\u003e\n\u003cli\u003eConfirm the nozzle turns freely by hand; fix the nozzle first if it does not\u003c\/li\u003e\n\u003cli\u003eConfirm the old board carries XAG part number 14-007-00098\u003c\/li\u003e\n\u003cli\u003eGround yourself and photograph every connector before disconnecting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect by connector bodies, never by wires\u003c\/li\u003e\n\u003cli\u003eHandle the new board by its edges only\u003c\/li\u003e\n\u003cli\u003eClean and dry the enclosure; fix any cracked cover or seal\u003c\/li\u003e\n\u003cli\u003eFit the board, reconnect as photographed and close the enclosure fully\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower up and confirm no nozzle faults\u003c\/li\u003e\n\u003cli\u003eRun a ground test with water and confirm the nozzle runs smoothly\u003c\/li\u003e\n\u003cli\u003eCompare it with the other nozzles\u003c\/li\u003e\n\u003cli\u003eAvoid direct wash-down spray at the board's enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThe nozzle ESC board is the electronic repair for a nozzle that will not run.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXAG P150 operators with a nozzle that turns freely but will not run\u003c\/li\u003e\n\u003cli\u003eAerial applicators with recurring nozzle drive faults\u003c\/li\u003e\n\u003cli\u003eCrews working wet or chemical-heavy conditions\u003c\/li\u003e\n\u003cli\u003eCustom application contractors running long spray days\u003c\/li\u003e\n\u003cli\u003eAgricultural drone service centres doing electronics repairs\u003c\/li\u003e\n\u003cli\u003eGrowers maintaining their own P150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if\u003c\/strong\u003e the nozzle is rough or seized, or the fault is in the cable or connector. Turn the nozzle by hand and check the wiring first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your board; this one is identified for the P150.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eOn the P150, a nozzle is only as good as the board that drives it. A failed board leaves a spray position idle, and an idle position leaves a stripe of the field without its share of product.\u003c\/p\u003e\n\u003cp\u003eGetting the diagnosis right matters in both directions. Replacing the nozzle when the board has failed leaves the fault in place. Replacing the board when the nozzle is seized can damage the new board as soon as it tries to drive the stuck motor. Turning the nozzle by hand and checking the wiring first sends the repair to the right part.\u003c\/p\u003e\n\u003cp\u003eProtecting the board's enclosure is what makes the repair last. Most board failures start with moisture or residue getting in, and a sealed, intact cover keeps them out.\u003c\/p\u003e\n\u003cp\u003eWhen several nozzle boards fail over a season, the pattern is worth looking at. Repeated failures at the same position, or after wash-downs, usually point at an enclosure, a seal or a cleaning habit rather than at the boards themselves.\u003c\/p\u003e\n\u003cp\u003eA sound nozzle ESC board restores:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReliable drive to the nozzle motor\u003c\/li\u003e\n\u003cli\u003eSmooth, consistent nozzle running\u003c\/li\u003e\n\u003cli\u003eCorrect response to spray commands\u003c\/li\u003e\n\u003cli\u003eA complete, even swath\u003c\/li\u003e\n\u003cli\u003eFewer nozzle faults in the field\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e XAG P150 OEM Nozzle ESC Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXAG part number:\u003c\/strong\u003e 14-007-00098\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e XAG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Nozzle electronic speed controller board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Application system electronics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e XAG P150 (2024)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed for:\u003c\/strong\u003e XAG P150 Max\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct line:\u003c\/strong\u003e XAG agricultural drones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e On the application system, connected to the nozzle motor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Driving the P150 nozzle motor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrives:\u003c\/strong\u003e Nozzle 05-002-02065\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacteristic failure modes:\u003c\/strong\u003e Moisture corrosion, heat damage, output stage failure, impact cracks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDistinguishing diagnostic rule:\u003c\/strong\u003e A nozzle that turns freely by hand but will not run, with sound wiring, points at the board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon causes:\u003c\/strong\u003e Moisture through damaged covers, heat, seized nozzle motors, impacts, vibration\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Nozzle 05-002-02065, enclosure or cover, cables, propulsion ESC parts, fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment method:\u003c\/strong\u003e XAG part number 14-007-00098 plus board outline and connectors against the removed board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerification after fitting:\u003c\/strong\u003e No nozzle faults; nozzle runs smoothly in a water test\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine XAG OEM ESC board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eXAG P150 nozzle ESC board\u003c\/p\u003e\n\u003cp\u003eXAG 14-007-00098\u003c\/p\u003e\n\u003cp\u003e14-007-00098 nozzle ESC\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM nozzle ESC\u003c\/p\u003e\n\u003cp\u003eP150 nozzle ESC replacement\u003c\/p\u003e\n\u003cp\u003eXAG P150 nozzle driver board\u003c\/p\u003e\n\u003cp\u003eXAG P150 nozzle controller\u003c\/p\u003e\n\u003cp\u003eXAG P150 nozzle not spinning\u003c\/p\u003e\n\u003cp\u003eP150 nozzle fault\u003c\/p\u003e\n\u003cp\u003eXAG P150 application system electronics\u003c\/p\u003e\n\u003cp\u003eXAG P150 spraying system parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 OEM parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 replacement parts\u003c\/p\u003e\n\u003cp\u003eXAG P150 repair parts\u003c\/p\u003e\n\u003cp\u003eXAG agricultural drone parts\u003c\/p\u003e\n\u003cp\u003eXAG spray drone parts\u003c\/p\u003e\n\u003cp\u003egenuine XAG OEM parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts USA\u003c\/p\u003e\n\u003cp\u003eXAG parts free shipping\u003c\/p\u003e\n\u003cp\u003eXAG parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eXAG parts Albuquerque\u003c\/p\u003e\n\u003cp\u003eXAG parts New Mexico\u003c\/p\u003e\n\u003cp\u003eXAG P150 nozzle ESC Canada\u003c\/p\u003e\n\u003cp\u003eXAG P150 parts Canada\u003c\/p\u003e\n\u003cp\u003eXAG drone parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy XAG P150 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the XAG P150 nozzle ESC board?\u003c\/strong\u003e It is the electronic speed controller board, XAG part number 14-007-00098, that drives the nozzle motor on the XAG P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e The XAG P150 (2024). It is not confirmed for the P150 Max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy nozzle will not spin. Is it the ESC board?\u003c\/strong\u003e Turn the nozzle by hand first. If it turns freely and the wiring is sound, the board is the likely cause. If it is rough or seized, fix the nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy fix a seized nozzle before fitting a new board?\u003c\/strong\u003e A seized motor can overload and damage a new board as soon as it tries to drive it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the nozzle?\u003c\/strong\u003e No. The nozzle is a separate part, XAG part number 05-002-02065.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the propulsion motor ESC?\u003c\/strong\u003e No. This board drives the nozzle motor only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually damages it?\u003c\/strong\u003e Moisture and residue through a damaged cover, heat, faults in the nozzle motor or wiring, and impacts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e With care. Power down, ground yourself against static, photograph connectors, handle the board by its edges and seal the enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the repair?\u003c\/strong\u003e Power up with no nozzle faults and run a water test to confirm the nozzle runs smoothly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCould the cable be the problem?\u003c\/strong\u003e Yes. Corroded connectors and broken wires look like a dead board. Check them first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do boards fail after washing?\u003c\/strong\u003e Water that reaches the board through a cracked cover or missing seal corrodes components and connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a cover?\u003c\/strong\u003e No. Reuse the original enclosure, and replace it if it is cracked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is its current rating?\u003c\/strong\u003e It is not published for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store a spare?\u003c\/strong\u003e In its anti-static packaging, dry and away from heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a P150 Max board fit?\u003c\/strong\u003e Do not assume so. Match the XAG part number; this one is identified for the P150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeveral nozzle boards have failed. Why?\u003c\/strong\u003e Look for a common cause such as damaged enclosures, missing seals or direct wash-down spray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need setup after fitting?\u003c\/strong\u003e Follow any steps the aircraft calls for, then confirm normal nozzle operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the part number?\u003c\/strong\u003e Look for XAG part number 14-007-00098, or send us a photograph of the board and we will confirm the match.\u003c\/p\u003e","brand":"XAG","offers":[{"title":"Default Title","offer_id":68139981439296,"sku":"14-007-00098","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/xag-p150-oem-nozzle-esc-board-1.png?v=1794884687","url":"https:\/\/aresacres.com\/products\/xag-p150-oem-nozzle-esc-board","provider":"Ares Acres","version":"1.0","type":"link"}