{"product_id":"dji-agras-t30-oem-spreading-system-main-signal-cable","title":"Cabo de Sinal Principal do Sistema de Espalhamento OEM para DJI Agras T30","description":"\u003cp\u003eThe DJI Agras T30 OEM Spreading System Main Signal Cable is the main signal harness of the aircraft's granular spreading system. It is a black, branched cable with three connection points: a square panel connector with a mounting flange and a yellow-sealed plug at one end, a flat connector with a purple tip and a small mounting flange on a branch, and a yellow-sealed plug at the other end, with white band markers along the runs. It carries the signals between the parts of the spreading system it connects; it does not drive, measure or spread anything itself. It belongs to the spreading system, not to the spray, power or flight-control systems, and it is identified for the DJI Agras T30 and T10. Operators usually reach it while searching for a T30 spreader cable, a T30 spreading system signal cable, a T10 spreader harness, a T30 spreading system not recognised, or the reason a T30 spreader fault comes and goes. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 \/ DJI Agras T10 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30 and T10 granular spreading system\u003c\/li\u003e\n\u003cli\u003eMatched by panel connector, purple-tipped branch connector, sealed plug and cable layout against the cable you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM spreading system component, brand new, one complete branched cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCables are easiest to match by their ends. If you want the match confirmed, lay the cable you removed flat, photograph all three connectors in one frame and then each connector close up, and send the photographs to us. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Spreading System Main Signal Cable — the black branched cable with its square flanged panel connector and yellow-sealed plug, its purple-tipped flat branch connector with flange, and its yellow-sealed end plug, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the cable alone.\u003c\/strong\u003e It is the harness that connects parts of the spreading system, not the parts it connects.\u003c\/p\u003e\n\u003cp\u003eNot included: the reduction gearbox module, the distribution board, the hopper, the spreading system box cover, cable ties, and any screws used to fasten the panel connector or the branch connector flange.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the cable on an aircraft. If the fault is in a powered part of the spreading system rather than in the wiring, the DJI Agras T30 OEM Reduction Gearbox Module and the DJI Agras T30 OEM Distribution Board Module are separate parts, and the DJI Agras T30 OEM Spreading System is the complete assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA spreading system is a set of separate parts that only work as one if they can talk to each other and to the aircraft. The main signal cable is the harness that makes that connection. Its three ends reach the points the spreading system's signals have to pass between, and its sealed connectors keep those signals clean in the dust and wash water a spreader lives in.\u003c\/p\u003e\n\u003cp\u003eIts features, all visible in the product images:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe panel connector\u003c\/strong\u003e — a square connector body with a flat mounting flange and screw holes, carrying a yellow-sealed plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe branch connector\u003c\/strong\u003e — a flat connector with a purple tip and a small mounting flange, on its own branch of the cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe end plug\u003c\/strong\u003e — a yellow-sealed plug at the far end of the main run, behind a section of heat-shrink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe cable runs\u003c\/strong\u003e — black, round-sheathed cable forming a main run and a branch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe band markers\u003c\/strong\u003e — white bands along the cable runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe cable is not a passive accessory. Every signal the spreading system depends on passes through its pins, and it is the part most often handled, bent and unplugged when the spreading system is serviced.\u003c\/p\u003e\n\u003cp\u003eOver a working season the main signal cable sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlugging and unplugging every time the spreading system is fitted, removed or cleaned\u003c\/li\u003e\n\u003cli\u003eBending at the connector entries when the spreading system is lifted on and off\u003c\/li\u003e\n\u003cli\u003eFertiliser dust and corrosive residue settling on the connectors and the sheath\u003c\/li\u003e\n\u003cli\u003eWash-down water around the seals\u003c\/li\u003e\n\u003cli\u003eVibration from the propulsion system for every hour of flight\u003c\/li\u003e\n\u003cli\u003eChafing where the runs pass close to the frame or other parts\u003c\/li\u003e\n\u003cli\u003ePulls on the cable when the spreading system is moved with the cable still connected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMain signal cables come off for four reasons: a broken conductor inside a sheath that looks intact, damaged or corroded pins, a cracked connector body or flange, and a chafed, cut or crushed sheath.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe cable's engineering role is connection. It carries the signals between the parts of the spreading system it reaches, through sealed connectors that keep moisture and dust off the pins.\u003c\/p\u003e\n\u003cp\u003eIn the spreading system it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnects the spreading system's signal points through its three ends\u003c\/li\u003e\n\u003cli\u003eCarries signals along its main run and its branch\u003c\/li\u003e\n\u003cli\u003eSeals each connection against dust and water at the yellow and purple seals\u003c\/li\u003e\n\u003cli\u003eAnchors the panel connector and the branch connector through their mounting flanges\u003c\/li\u003e\n\u003cli\u003eLets the spreading system be disconnected and reconnected at its plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not drive the spreader; the reduction gearbox module does\u003c\/li\u003e\n\u003cli\u003eIt does not route power for the spreading system; the distribution board does\u003c\/li\u003e\n\u003cli\u003eIt does not decide the rate; the aircraft and the app settings do\u003c\/li\u003e\n\u003cli\u003eIt does not protect the spreading electronics; the spreading system box cover does\u003c\/li\u003e\n\u003cli\u003eIt is not the complete spreading system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat is why a cable fault is so often blamed on something else. When the cable loses a conductor, the parts at its ends stop receiving their signals, and from the aircraft's side that looks exactly like those parts failing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — a fault that comes and goes with refitting the spreader belongs to the cable, not the module\u003c\/h2\u003e\n\u003cp\u003eWhen a T30 or T10 spreading system stops being recognised, throws an error, or works one flight and not the next, the powered parts are the first suspects: the gearbox module, the distribution board, the electronics under the box cover. They are the larger parts and the ones with obvious jobs. The cable, being a cable, gets a glance and a pass.\u003c\/p\u003e\n\u003cp\u003eBut the cable is the part that moves most. Every time the spreading system goes on or comes off, the connectors are unplugged and replugged and the cable is bent at the same few points where it enters each connector. Conductors fatigue there, inside a sheath that looks perfect. A broken conductor that touches when the cable lies one way and parts when it lies another produces a fault that comes and goes with how the spreader was last fitted.\u003c\/p\u003e\n\u003cp\u003eThat pattern is the giveaway. A failed module fails the same way every time. A failing cable fails differently depending on how it is lying, and a fault that appears or clears when the spreading system is removed and refitted, or when the cable is moved, is pointing at the cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the main signal cable has failed:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe spreading system is recognised on some fittings and not on others\u003c\/li\u003e\n\u003cli\u003eAn error appears or clears when the cable is moved, flexed or the spreading system is refitted\u003c\/li\u003e\n\u003cli\u003eThe spreader works on the ground and drops out in flight under vibration\u003c\/li\u003e\n\u003cli\u003eBent, pushed-back, green or white-corroded pins in any of the three connectors\u003c\/li\u003e\n\u003cli\u003eA cracked panel connector body, a broken flange or a torn seal\u003c\/li\u003e\n\u003cli\u003eA chafed, cut, crushed or kinked sheath, especially near a connector entry\u003c\/li\u003e\n\u003cli\u003eA connector that will not seat fully or that pulls out with little force\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBefore condemning the cable, rule out what imitates it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA connector not fully seated\u003c\/strong\u003e — a plug that is only half home behaves like a broken conductor; reseat all three and test again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirt or water in a connector\u003c\/strong\u003e — residue on the pins causes the same intermittent fault; clean and dry before judging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe gearbox module\u003c\/strong\u003e — if the fault stays exactly the same however the cable is moved, the module may be the part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe distribution board\u003c\/strong\u003e — a board fault is constant, not dependent on cable position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware and app\u003c\/strong\u003e — a version mismatch after an update can stop the spreading system being recognised with every part healthy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse movement as your instrument.\u003c\/strong\u003e With the aircraft powered down and the battery out, unplug all three connectors and inspect every pin and seal under a torch. Clean and dry them, plug them back in until each seats fully, and power up. If the spreading system is recognised, gently flex the cable at each connector entry in turn, and along the runs, while watching for the error to return. A fault that follows your hand along the cable has found the broken conductor. A fault that never changes however the cable is moved is not in the cable.\u003c\/p\u003e\n\u003cp\u003eDo that check first. It needs a torch, a clean cloth and a few minutes, and it separates a cable fault from a module fault without swapping either.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the main signal cable when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA fault that appears or clears when the cable is flexed at a connector entry or along a run\u003c\/li\u003e\n\u003cli\u003eBent, pushed-back or corroded pins in any connector\u003c\/li\u003e\n\u003cli\u003eA cracked panel connector, broken flange or torn seal\u003c\/li\u003e\n\u003cli\u003eA chafed, cut, crushed or kinked sheath\u003c\/li\u003e\n\u003cli\u003eA connector that will not latch or seat fully\u003c\/li\u003e\n\u003cli\u003ePrevious repairs with tape, solder joints or splices along the cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeating of all three connectors\u003c\/li\u003e\n\u003cli\u003eDirt, residue or water on the pins\u003c\/li\u003e\n\u003cli\u003eThe reduction gearbox module\u003c\/li\u003e\n\u003cli\u003eThe distribution board\u003c\/li\u003e\n\u003cli\u003eFirmware and app versions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the main signal cable. It is replaced when it is damaged or when a movement test shows a broken conductor, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30, DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spreading system — granular spreading\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Branched main signal cable with three connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 complete cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black branched cable with a main run and a branch, white band markers along the runs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector 1:\u003c\/strong\u003e Square panel connector with a mounting flange and screw holes, carrying a yellow-sealed plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector 2:\u003c\/strong\u003e Flat connector with a purple tip and a small mounting flange, on the branch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector 3:\u003c\/strong\u003e Yellow-sealed plug at the end of the main run, behind heat-shrink\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePin count:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable length:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black sheath and connector bodies; yellow seals; purple branch connector tip; white band markers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e Signal cable; voltage, current and signal type not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e In the spreading system, with the panel connector and branch connector fixed by their flanges\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Plugs into the existing connectors; the panel and branch connectors fasten through their flanges; runs follow the original route\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws and cable ties are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Reduction gearbox module, distribution board, hopper, spreading system box cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM spreading system component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down and remove the battery\u003c\/li\u003e\n\u003cli\u003eEmpty the hopper and wash and dry the spreading system, so no residue falls into open connectors\u003c\/li\u003e\n\u003cli\u003ePhotograph the old cable in place, with all three connectors, both flanges and the full route of the runs and any cable ties in frame\u003c\/li\u003e\n\u003cli\u003eNote which connector goes where; the three ends are different, but a photograph removes any doubt\u003c\/li\u003e\n\u003cli\u003eLay the new cable beside the old one and compare all three connectors and the branch layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug each connector by its body, releasing the seal and any latch, never by pulling on the cable\u003c\/li\u003e\n\u003cli\u003eRemove the screws from the panel connector flange and the branch connector flange\u003c\/li\u003e\n\u003cli\u003eCut any cable ties carefully, without nicking the sheath of neighbouring cables\u003c\/li\u003e\n\u003cli\u003eLift the old cable out along its route\u003c\/li\u003e\n\u003cli\u003eLay the new cable along the same route, clear of moving parts and sharp edges\u003c\/li\u003e\n\u003cli\u003eFasten the panel connector and branch connector through their flanges; no torque figure is published, so tighten snugly without cracking the flanges\u003c\/li\u003e\n\u003cli\u003ePlug each connector in until it seats fully and its seal sits square, and replace any cable ties you cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRefit the battery and power up\u003c\/li\u003e\n\u003cli\u003eCheck that the spreading system is recognised with no error\u003c\/li\u003e\n\u003cli\u003eFlex the cable gently at each connector entry and check that no error appears\u003c\/li\u003e\n\u003cli\u003eRun the spreading system empty, then spread a short test strip with your usual product\u003c\/li\u003e\n\u003cli\u003eRemove and refit the spreading system once and check that it is recognised again\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Unplug connectors by their bodies, never by the cable, and support the cable when the spreading system is lifted on or off so it does not take the weight. Keep the seals clean and dry, and look for chafing wherever a run passes close to the frame.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis cable is for operators and technicians whose spreading system fault comes and goes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators whose spreading system is recognised on some fittings and not others\u003c\/li\u003e\n\u003cli\u003eDJI Agras T10 operators with a spreader that drops out in flight\u003c\/li\u003e\n\u003cli\u003eCommercial spreading and seeding applicators who swap between spreading and spraying through the season\u003c\/li\u003e\n\u003cli\u003eAgras service centres replacing a cable with damaged pins, a cracked panel connector or a chafed sheath\u003c\/li\u003e\n\u003cli\u003eFleet managers keeping a spare main signal cable for the busy spreading weeks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe fault stays exactly the same however the cable is moved — look at the gearbox module or the distribution board\u003c\/li\u003e\n\u003cli\u003eThe fault cleared after the connectors were cleaned and reseated — the cable is sound\u003c\/li\u003e\n\u003cli\u003eThe spreading system stopped being recognised after a firmware or app update — check versions first\u003c\/li\u003e\n\u003cli\u003eThe gearbox shaft is bent or the gearbox grinds — the DJI Agras T30 OEM Reduction Gearbox Module is the part\u003c\/li\u003e\n\u003cli\u003eThe whole spreading system is damaged — the DJI Agras T30 OEM Spreading System is the complete assembly\u003c\/li\u003e\n\u003cli\u003eYou fly a T16, T20, T40, T50 or T20P — this cable is identified for the T30 and T10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eA failed module fails the same way every time. A failing cable does not. It works when it lies one way and drops out when it lies another, which is why the fault seems to come and go with no pattern — until you notice it changes when the spreading system is refitted or the cable is moved.\u003c\/p\u003e\n\u003cp\u003eThat is the whole case for this cable. A spreading system that is recognised on one fitting and lost on the next does not need a new gearbox or a new distribution board. It needs the harness whose conductors have fatigued at the points where it is bent every time the spreader goes on and off.\u003c\/p\u003e\n\u003cp\u003eIt is also the case against replacing the cable too early. A half-seated plug or residue on the pins produces the same intermittent fault. Clean, dry and reseat all three connectors, then flex the cable while watching for the error. If the fault never moves with the cable, the cable is fine.\u003c\/p\u003e\n\u003cp\u003eWhen the fault follows your hand along the cable, nothing else on the spreader will cure it. The main signal cable is the part every spreading signal passes through, and it is the part that makes the spreading system answer the aircraft every time it is fitted.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30, DJI Agras T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30 and T10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Branched main signal cable with three connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Spreading system — granular spreading\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e In the spreading system, panel and branch connectors fixed by their flanges\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Carries the spreading system's signals between its connection points through sealed connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectors:\u003c\/strong\u003e Square flanged panel connector with yellow-sealed plug; purple-tipped flat branch connector with flange; yellow-sealed end plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 complete cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Reduction gearbox module, distribution board, hopper, spreading system box cover, screws, cable ties\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Clean and reseat all connectors, then flex the cable at each entry; a fault that moves with the cable is the cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Fatigued conductor at a connector entry, corroded or bent pins, cracked panel connector or flange, chafed sheath\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM spreading system component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 spreader cable; T30 spreading system signal cable; T10 spreader harness; DJI T30 spreading cable; T30 spreading system not recognised; T10 spreading system cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the reduction gearbox module; not the distribution board module; not the complete spreading system; not a spray-system cable; not identified for the T16, T20 or T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003eT30 spreader cable\u003c\/p\u003e\n\u003cp\u003eT30 spreading system signal cable\u003c\/p\u003e\n\u003cp\u003eT10 spreader harness\u003c\/p\u003e\n\u003cp\u003eDJI T30 spreading cable\u003c\/p\u003e\n\u003cp\u003eT30 spreading system not recognised\u003c\/p\u003e\n\u003cp\u003eT30 spreader intermittent fault\u003c\/p\u003e\n\u003cp\u003eDJI T10 spreading system cable\u003c\/p\u003e\n\u003cp\u003eAgras T30 spreader wiring harness\u003c\/p\u003e\n\u003cp\u003eT30 spreading system main cable replacement\u003c\/p\u003e\n\u003cp\u003eT10 spreader signal cable\u003c\/p\u003e\n\u003cp\u003eT30 spreader drops out in flight\u003c\/p\u003e\n\u003cp\u003eAgras T30 Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003eAgras T30 spreading system main signal cable replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003eAgras T10 Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 OEM Spreading System Main Signal Cable\u003c\/p\u003e\n\u003cp\u003eAgras T10 spreading system main signal cable replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 spreading system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T10 spreading system parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras cables and wiring\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Spreading System Main Signal Cable Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 spreading system main signal cable?\u003c\/strong\u003e It is the main signal harness of the T30 granular spreading system: a black branched cable with a square flanged panel connector, a purple-tipped flat branch connector and a yellow-sealed end plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30 and T10.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T20, T16 or T40?\u003c\/strong\u003e It is identified only for the T30 and T10. Send us a photograph of the cable you removed and we will check it against what you have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy spreader is recognised sometimes and not others. Is it the cable?\u003c\/strong\u003e Very likely. Clean and reseat all three connectors, then flex the cable at each connector entry while watching for the error. A fault that moves with the cable is the cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can a cable that looks perfect be broken?\u003c\/strong\u003e Conductors fatigue inside the sheath at the points where the cable is bent each time the spreader goes on and off. The sheath stays intact while a wire inside parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fault never changes when I move the cable. Do I need it?\u003c\/strong\u003e Probably not. A fault that stays the same however the cable lies points at a powered part, such as the gearbox module or the distribution board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the distribution board module?\u003c\/strong\u003e No. The DJI Agras T30 OEM Distribution Board Module is a board. This is the cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors included?\u003c\/strong\u003e Yes. All three connectors are part of the cable, as shown in the product images.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws or cable ties included?\u003c\/strong\u003e No. Reuse sound original screws for the flanges, and replace any cable ties you cut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich end goes where?\u003c\/strong\u003e Each of the three ends is different. Photograph the old cable in place before removing it and follow that photograph.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph all three connectors and send them to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable length or pin count?\u003c\/strong\u003e Neither is published for this part. Match it by its three connectors and branch layout, or send us a photograph.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I repair a broken wire with solder and tape?\u003c\/strong\u003e A splice in a spreading harness lets dust and water in and becomes the next weak point. A damaged cable is replaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes. It plugs into the existing connectors, the two flanged connectors fasten with their screws, and the runs follow the original route.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I make the new cable last?\u003c\/strong\u003e Unplug by the connector bodies, never by the cable, support the cable when the spreader is lifted, and keep the seals clean and dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when it is damaged or a movement test shows a broken conductor.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68080399909184,"sku":null,"price":75.99,"currency_code":"USD","in_stock":true},{"title":"DJI T10","offer_id":68080399941952,"sku":null,"price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-spreading-system-main-signal-c-4784.png?v=1794510767","url":"https:\/\/aresacres.com\/pt\/products\/cabo-de-sinal-principal-sistema-de-espalhamento-oem-dji-agras-t30","provider":"Ares Acres","version":"1.0","type":"link"}