{"product_id":"dji-agras-t100-gimbal-lens-protection-cap-replacement-quarterly-program","title":"DJI Agras T100 Gimbal Lens Protection Cap","description":"\u003cp\u003e\u003cstrong\u003eDJI Agras Gimbal Lens Protection Cap | Sacrificial FPV Lens Shield | Genuine DJI OEM Accessory | Quarterly Replacement Program\u003cbr\u003e\u003cbr\u003eBilled quarterly at the price shown above\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers, every cycle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe gimbal lens protection cap is a sacrificial part by design — it takes the scratches, chemical overspray, dust abrasion, and handling knocks that would otherwise land on the FPV camera lens itself. After a season quarter of daily field duty, a hazed or scratched cap is doing the opposite of its job: degrading the operator's view instead of protecting it.\u003c\/p\u003e\n\u003cp\u003eThis program ships one genuine DJI OEM gimbal lens protection cap automatically every 3 months. The price shown is a recurring quarterly program fee, not a one-time purchase price. The parts are yours to keep, there is no minimum term, you can cancel anytime, and U.S. shipping is free every cycle.\u003c\/p\u003e\n\u003cp\u003eCompared with buying the cap one-time and reactively, quarterly replacement costs less per cap and keeps clear optics protection always within reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnroll using the purchase option above — cancel anytime\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe use specialized technicians to verify and dispatch the Gimbal Lens Protection Cap Replacement ordered.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.\u003c\/p\u003e\n\u003cp\u003eThat is why Ares Acres keeps the drone accessories operators actually run out of in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.\u003c\/p\u003e\n\u003cp\u003eFor professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T100 \/ DJI Agras T70P \/ DJI Agras T55 \/ DJI Agras T50 \/ DJI Agras T40, this is the part that keeps a scheduled job on the calendar instead of on hold.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T100 \/ T70P \/ T55 \/ T50 \/ T40 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Genuine DJI Agras OEM Gimbal Lens Protection Cap, shipped automatically every 3 months\u003c\/li\u003e\n\u003cli\u003eA fresh cap every cycle — the parts are yours to keep, no return required\u003c\/li\u003e\n\u003cli\u003eRecurring quarterly program fee at the price shown above — not a one-time purchase price\u003c\/li\u003e\n\u003cli\u003eNo minimum term — cancel anytime and future shipments simply stop\u003c\/li\u003e\n\u003cli\u003eFREE \u0026amp; FAST U.S. shipping on every shipment\u003c\/li\u003e\n\u003cli\u003eEnroll using the purchase option above — current pricing is shown there; cancel anytime\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eGimbal Lens Protection Cap\u003c\/strong\u003e is the genuine DJI OEM dust and impact cover fitted over the gimbal camera lens on DJI Agras aircraft. It is the sacrificial layer between field conditions and the optics the operator flies by.\u003c\/p\u003e\n\u003cp\u003eThe cap serves to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShield the FPV lens from scratches and impacts\u003c\/li\u003e\n\u003cli\u003eTake chemical overspray instead of the lens coating\u003c\/li\u003e\n\u003cli\u003eKeep dust and grit off the optics between flights\u003c\/li\u003e\n\u003cli\u003eProtect the camera during transport and handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThroughout commercial duty, the cap is routinely exposed to abrasive dust at the swap point, chemical overspray and residue film, UV hazing, transport scuffs, and handling knocks. Wear on it is the system working — and the reason it should be renewed on schedule.\u003c\/p\u003e\n\u003cp\u003eIt helps to know how a worn cap actually degrades an image, because it is not the way most operators expect. Fine scratches and abrasion do not block light, they scatter it. The picture keeps its brightness and loses its contrast, so the feed looks washed out and slightly soft rather than obviously damaged. In flat overcast light a badly abraded cap can look almost acceptable. Point the aircraft toward a low sun and the same cap turns the screen into a sheet of glare.\u003c\/p\u003e\n\u003cp\u003eChemical film is a different problem from scratching and it is usually the worse of the two. Overspray dries into a thin uneven layer that refracts light in every direction, and because it builds up gradually the operator's eye adapts to it a little at a time. That is why so many pilots only discover how bad their view had become after they fit a fresh cap. Residue also holds dust against the surface, so a filmed cap collects abrasive grit faster and then grinds it in at the next wipe.\u003c\/p\u003e\n\u003cp\u003eThe cap is a sacrificial part in the strict sense: it is meant to be destroyed instead of the lens. That only works if it is actually replaced when it is worn, and it fails completely if it is removed and left off. A bare gimbal lens in a spray environment picks up chemical etching on its coating and grit scoring from the first wipe with a dry cloth, and neither is repairable. The lens is part of the camera assembly, so damage there is a gimbal-level job rather than an accessory swap.\u003c\/p\u003e\n\u003cp\u003eDiagnosing whether the fuzzy picture is the cap, the lens, or the camera is quick if you do it in the right order. First, in a clean, dry, indoor space, look at the cap under a raking light held to one side, which makes scratches and film show up that are invisible head-on. Then look at the feed on a high-contrast edge, such as a dark building against sky, before and after carefully removing the cap. If the picture snaps into contrast with the cap off, you have your answer and the fix costs almost nothing.\u003c\/p\u003e\n\u003cp\u003eIf the image is still soft with the cap removed, stop guessing and look closer. Haze that shifts as the aircraft rotates relative to the sun is surface scatter on optics. Blur that stays identical regardless of sun angle, sits in one part of the frame, or comes with blocky artifacts and freezing is not an optics problem at all and points at the camera, the gimbal cabling, or the video link. Fitting a new cap will not change any of those, so it is worth spending two minutes to tell them apart.\u003c\/p\u003e\n\u003cp\u003eRemoval and refit are simple but the gimbal is the fragile thing in the picture, not the cap. Support the gimbal body itself while working, do not lever against the camera head, and do not force the gimbal against its travel to get a better angle. Take the cap off with the aircraft powered down so the motors are not fighting you. Going back on, seat it evenly and squarely, and then move the gimbal gently through its range by hand to confirm nothing fouls and nothing rubs at the extremes of travel.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe program helps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep a clear, fresh lens cap always on hand\u003c\/li\u003e\n\u003cli\u003eRenew the sacrificial layer before haze degrades visibility\u003c\/li\u003e\n\u003cli\u003eProtect the far more expensive FPV camera underneath\u003c\/li\u003e\n\u003cli\u003eKeep the operator's view sharp for obstacle awareness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA hazed or scratched cap may contribute to: degraded FPV visibility, glare and flare in low sun, misjudged obstacles, and — if removed and not replaced — a bare lens taking permanent damage.\u003c\/p\u003e\n\u003cp\u003eThe practical purpose is protecting the operator's judgment, not just the glass. Almost everything an aerial applicator does at low level is judged against what is on the screen: how close the boom is to a treeline, where the powerline actually runs, whether that is a fence post or a person. A view that has lost contrast does not announce itself as a fault. It quietly narrows the margin the operator is flying to, and it does it worst in exactly the conditions that matter, which are low sun and dust.\u003c\/p\u003e\n\u003cp\u003eIt also protects the value in the assembly behind it. The cap is an accessory. The lens is not a separate serviceable item on most gimbal cameras, so a scratched or etched lens surface generally means replacing a camera or a gimbal, along with the downtime that comes with sourcing and fitting one. Running a worn cap or, worse, running none at all, transfers a cheap consumable cost into an expensive assembly cost for no gain whatsoever.\u003c\/p\u003e\n\u003cp\u003eThere is a handling role that gets overlooked as well. Most of the damage to gimbal optics does not happen in flight. It happens on the ground, during loading, during battery swaps in a dusty field, when the aircraft is being carried, and when someone sets it down on a tailgate. The cap is the part that takes the knuckle, the strap buckle, and the corner of a battery case, and it is the reason a routine day of handling does not end with a mark on the lens.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVisible haze, scratches, or chemical film on the cap\u003c\/li\u003e\n\u003cli\u003eGlare or soft focus in the FPV feed\u003c\/li\u003e\n\u003cli\u003eCracked or loose-fitting cap\u003c\/li\u003e\n\u003cli\u003eA quarter of daily field duty on the current cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe feed washes out badly when flying toward low sun but looks acceptable at midday with the sun behind you. That is scattering from surface damage or film on the cap, and it is the classic first symptom. It matters more than it sounds, because early morning and late evening are when most spraying happens and when the operator most needs to see wires and treelines against a bright sky.\u003c\/p\u003e\n\u003cp\u003eA visible haze or bloom around bright objects, such as a halo around the sun or smeared light around a work light at dusk. Light that should pass straight through is being spread across the frame by fine scratches and dried residue. Clean the cap properly and look again. If the bloom is unchanged after a genuine wet clean, the cap has physical wear rather than dirt and cleaning it further will only add more scratches.\u003c\/p\u003e\n\u003cp\u003eThe picture looks slightly soft everywhere, with no single sharp area anywhere in the frame. Uniform softness across the whole image points at something in front of the lens rather than at the camera, because a camera or focus fault usually leaves part of the frame better than the rest. Pull the cap off in a clean space and compare on the same high-contrast target before condemning anything expensive.\u003c\/p\u003e\n\u003cp\u003eA milky or rainbow sheen that appears after wash-down and does not wipe off. That is chemical film or the beginning of crazing from a solvent or a strong cleaner that reached the cap. Crazing looks like a network of extremely fine lines and it cannot be polished out of a moulded cap. It is also progressive, so a cap that has started to craze will get worse quickly and is worth replacing rather than nursing.\u003c\/p\u003e\n\u003cp\u003eThe cap has become loose, rattles, or has shifted out of position between flights. A loose cap is worse than no cap, because it can move against the lens under vibration and grind whatever dust is trapped between them directly into the coating. Look for a cracked edge, a distorted lip, or a retaining feature that has been broken by a previous removal, and take it off the aircraft until a fresh one is fitted.\u003c\/p\u003e\n\u003cp\u003eMarks that do not move when the gimbal rotates. A spot or streak that stays in the same place on the screen while the world moves behind it is on the optical path. Whether it is on the cap or behind it is settled in seconds by removing the cap. A mark that survives removal is on the lens or inside the camera, and that changes the repair completely.\u003c\/p\u003e\n\u003cp\u003eThe gimbal reports an obstruction, feels notchy through its travel, or the cap fouls at an extreme of movement. Check that the cap is fully and squarely seated first, because a partly fitted cap can catch. If the cap is correctly on and something still binds, stop using the gimbal until it is inspected, because forcing a stalled gimbal motor is a far more expensive problem than anything the cap will ever cause.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Gimbal lens protection cap \/ sacrificial optics cover\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T100\u003c\/li\u003e\n\u003cli\u003eDJI Agras T70P\u003c\/li\u003e\n\u003cli\u003eDJI Agras T55\u003c\/li\u003e\n\u003cli\u003eDJI Agras T50\u003c\/li\u003e\n\u003cli\u003eDJI Agras T40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Drone Accessories\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 cap per quarterly shipment\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Gimbal camera lens\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new genuine DJI OEM accessory\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgram Structure:\u003c\/strong\u003e Recurring quarterly fee at the price shown above, not a one-time purchase price. One cap ships automatically every 3 months; no minimum term; cancel anytime; parts are yours to keep; free U.S. shipping every cycle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensional figures:\u003c\/strong\u003e Outside diameter, depth, and material are not published for this cap. Do not order by measurement or by photograph. Match it against the cap you removed and against the parts diagram for your specific airframe, since caps of the same general shape appear across several models and generations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot interchangeable with other covers:\u003c\/strong\u003e Other lenses, radar domes, and sensor windows on the same airframe have their own covers. They can look similar in a parts bin and are not substitutes for one another. Keep them separated and labelled, because a cover that almost fits an optical opening is the sort of thing that gets forced on and then cracks in flight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning method:\u003c\/strong\u003e Blow or rinse loose grit off before anything touches the surface. Then flood with clean water, and only then wipe with a clean, soft, damp microfiber using light pressure in one direction. Dry wiping a dusty cap is what puts most of the scratches on it, and shop rags, paper towel, and a shirt sleeve are all abrasive on a moulded optical surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolvents and cleaners:\u003c\/strong\u003e Keep alcohol, acetone, fuel, tank cleaners, and general-purpose degreasers away from the cap. Solvents craze moulded plastics, and crazing is permanent, progressive, and cannot be polished out. If chemical film will not lift with water and gentle detergent, replace the cap rather than escalating to something stronger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage and handling of spares:\u003c\/strong\u003e Keep a spare in its bag until it is needed, out of direct sunlight, and never loose in a toolbox where it will collect scuffs before it is ever fitted. Ultraviolet exposure hazes plastic on a shelf just as it does on the aircraft, so a spare stored on a truck dashboard for a season is not a fresh spare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetiring the old cap:\u003c\/strong\u003e A worn but uncracked cap is worth keeping in the case as an emergency spare. It is better than flying with a bare lens if a fresh one is damaged in the field, and it is useful as a comparison piece when you want to judge how far the current one has degraded.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧰 Fitment Verification Before You Order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm fitment by part number before ordering.\u003c\/strong\u003e Find the code printed on the component you are replacing, or look it up on the DJI Agras parts diagram for your airframe, and compare it against this listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRevision suffixes are still the same part.\u003c\/strong\u003e DJI labels sometimes carry a trailing revision such as \u003cem\u003e.01\u003c\/em\u003e, \u003cem\u003e.02\u003c\/em\u003e, or \u003cem\u003e.F\u003c\/em\u003e. Those denote a production revision, not a different component. Match the base number and disregard the suffix.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisually similar is not the same.\u003c\/strong\u003e DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerified fitment for this listing:\u003c\/strong\u003e DJI Agras T100 \/ DJI Agras T70P \/ DJI Agras T55 \/ DJI Agras T50 \/ DJI Agras T40. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure?\u003c\/strong\u003e Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Handling Notes\u003c\/h2\u003e\n\u003cp\u003eThese are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower down completely and disconnect the flight batteries\u003c\/strong\u003e before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhotograph the assembly before you disturb it.\u003c\/strong\u003e Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the Gimbal Lens Protection Cap Replacement is easier to fit correctly when you can see how the original sat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque to DJI specification.\u003c\/strong\u003e Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the mating surfaces and seals while you are in there.\u003c\/strong\u003e A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest before you spray.\u003c\/strong\u003e Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.\u003c\/p\u003e\n\u003cp\u003eIf the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis program is ideal for: DJI Agras T100, T70P, T55, T50, and T40 operators; farmers operating spray drones; commercial spraying contractors; fleet maintenance managers; and professional agricultural drone operators. Especially valuable during dusty peak-season operation and multi-aircraft fleet maintenance cycles.\u003c\/p\u003e\n\u003cp\u003eDawn and dusk spraying, where the sun sits low in the frame for much of the working window and the difference between a clear cap and a scratched one is the difference between seeing a wire and not seeing it.\u003c\/p\u003e\n\u003cp\u003eDusty ground operations and any field where the aircraft is being set down and picked up repeatedly on bare soil. The swap point is where most abrasion happens, and grit blown onto a cap during a battery change is grit that gets ground in during the next wipe.\u003c\/p\u003e\n\u003cp\u003eFleet handovers between pilots, where nobody has been watching one aircraft's picture degrade day by day. A fresh cap resets the baseline so a new operator is not quietly accepting a worse view than the machine is capable of giving.\u003c\/p\u003e\n\u003cp\u003eAny inspection or documentation flight where image quality is the product, such as recording stand counts, damage assessment, or evidence of an application. A hazed cap costs nothing in spray performance and ruins the record you were flying to collect.\u003c\/p\u003e\n\u003cp\u003eTransport-heavy operations covering several farms a day, where the aircraft spends as much time being loaded and strapped down as it does in the air and the cap is doing its handling-protection job far more than its optical one.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe cap exists to be ruined so the lens is not. Once it hazes over, every hour flown behind it is flown with degraded vision — and a scratched FPV lens is a gimbal-level repair, not an accessory swap. A fresh OEM cap every quarter keeps the cheap part taking the damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtect the cap. Protect the lens. Protect the view. Protect the season.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe whole argument for this part is the price gap on either side of it. The cap is one of the least expensive items in the catalogue. The camera and gimbal it sits in front of are not, and their lens is not separately serviceable in the field, so damage to it means an assembly change and the downtime to arrange one. There is no version of this trade where running a worn cap saves money, because the only thing it protects is the accessory budget.\u003c\/p\u003e\n\u003cp\u003eThe safety argument is quieter but it is the real one. Low-level agricultural flying is done on visual margins that are already thin, near wires, poles, treelines, irrigation gear, and occasionally people. Degraded contrast does not cause an accident by itself. It removes the second or two of warning that would otherwise let the operator react. Nobody notices that margin disappearing, because it happens over weeks and the picture always looks normal enough on the day.\u003c\/p\u003e\n\u003cp\u003eAnd there is the adaptation problem, which is the reason a schedule beats judgment on this particular part. Optical degradation is gradual and the human eye compensates for it constantly, so an operator looking at the same screen every day is the worst possible judge of how much the view has deteriorated. Replacing on a cycle sidesteps that entirely. The comparison you get on the first flight with a fresh cap usually settles any argument about whether the old one was still fine.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T100 Gimbal Lens Protection Cap Replacement (Quarterly Program)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Gimbal Lens Protection Cap\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct category:\u003c\/strong\u003e Drone Accessories\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Agras T100, T70P, T55, T50, T40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Gimbal camera lens\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgram type:\u003c\/strong\u003e Quarterly replacement subscription — one genuine DJI OEM cap ships automatically every 3 months; parts are kept by the customer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras reseller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free and fast U.S. shipping every cycle; same-day dispatch and tracking on in-stock parts\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚚 Shipping, Returns \u0026amp; Support\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFree and fast shipping within the United States\u003c\/strong\u003e on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship from the U.S., not from overseas.\u003c\/strong\u003e That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew condition, correctly described.\u003c\/strong\u003e We describe what we ship and we do not overstate it. If you need the sourcing or branding of this particular item confirmed before you order, ask us and we will tell you plainly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdered the wrong part?\u003c\/strong\u003e Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed help identifying a part?\u003c\/strong\u003e Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFleet and dealer volume:\u003c\/strong\u003e operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Gimbal Lens Protection Cap?\u003c\/strong\u003e The genuine DJI OEM sacrificial cover that shields the gimbal FPV camera lens on DJI Agras aircraft from scratches, overspray, and dust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the quarterly program work?\u003c\/strong\u003e The price shown is a recurring quarterly program fee, not a one-time purchase price. One genuine DJI OEM cap ships automatically every 3 months with free U.S. shipping. No minimum term, cancel anytime, and the parts are yours to keep. Enroll using the purchase option above — current pricing is shown there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy subscribe instead of buying one-time?\u003c\/strong\u003e Because the cap is sacrificial by design and hazes over on a predictable seasonal schedule. On the quarterly program a fresh cap shows up on its own, at a lower price per cap than buying one-time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my aircraft?\u003c\/strong\u003e Supplied for the DJI Agras T100, T70P, T55, T50, and T40. If your airframe is not listed, message us with your model and serial before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my aircraft?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis part is supplied for the DJI Agras T100 \/ DJI Agras T70P \/ DJI Agras T55 \/ DJI Agras T50 \/ DJI Agras T40. Confirm against your model's DJI Agras parts diagram before ordering. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow fast does it ship, and where does it ship from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install the Gimbal Lens Protection Cap Replacement myself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMany operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I order the wrong part?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you stock other parts for this aircraft?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tell whether the blurry picture is the cap or the camera?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo it in two steps in a clean, dry space. Look at the cap under a light held off to one side, which reveals scratches and film that are invisible when you look straight at it. Then compare the live feed on a high-contrast target with the cap on and with it carefully removed. If contrast returns with the cap off, replace the cap. If nothing changes, the problem is behind the cap and a new one will not fix it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I polish the scratches out instead of replacing the cap?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a bad idea on a moulded optical cover. Polishing removes material unevenly, which trades sharp scratches for a soft distorted area, and most plastic polishes contain abrasives or solvents that haze the surface further. There is no way to restore a moulded optical surface to flat in the field. Given what the part costs relative to the camera behind it, replacement is the only sensible answer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the right way to clean it without adding scratches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGet the grit off before anything touches the surface. Blow it off or rinse it under running water first, then flood the cap with clean water, then wipe gently with a clean damp microfiber in one direction rather than scrubbing in circles. Never dry wipe a dusty cap, and never use paper towel, a shop rag, or your sleeve. Most of the scratches on a used cap were put there during cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it better to fly with no cap than with a scratched one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. A bare lens in a spray environment picks up chemical etching and gets scored the first time anyone wipes it, and the lens is not a serviceable part on its own. A scratched cap degrades your view, which is a real problem, but it still keeps overspray and grit off the optics. Fly with the worn cap until the fresh one arrives, and keep the old one in the case as an emergency spare rather than throwing it away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill alcohol or a lens cleaner damage the cap?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAssume it will. Alcohol, acetone, fuel, tank cleaners, and general degreasers all craze moulded plastics, and crazing shows up as a network of fine lines that scatter light permanently and get worse over time. Water and a mild detergent is as far as you should go. If film will not come off with that, the cap has reached the end of its life and escalating to something stronger just destroys it faster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does my view look fine at noon and terrible at sunrise?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause scratches and film scatter light rather than blocking it, and scattering only becomes obvious when a strong light source is in or near the frame. With the sun behind you, the scattered light is a small fraction of the picture. Flying toward a low sun, it swamps everything. That is exactly why this symptom shows up worst during the hours agricultural aircraft actually fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cap keeps coming loose. What is wrong?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLook for a cracked or distorted lip, a damaged retaining feature from an earlier removal, or residue built up on the seating surface that is holding the cap from sitting fully home. Do not keep pushing a loose cap back on and flying. Under vibration it can move against the lens with dust trapped between them, which grinds the coating and turns a cheap accessory problem into a camera replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes removing and refitting the cap risk damaging the gimbal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt can if you use the camera head as a handle. Support the gimbal body, work with the aircraft powered down so the motors are not resisting you, and never force the gimbal past where it wants to go to get a better angle at the cap. After fitting, move the gimbal gently through its travel by hand and confirm the cap clears everything and does not catch at the extremes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the caps the same across the different Agras models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not assume it. Caps of similar shape appear across models and generations while differing in diameter, depth, or how they retain, and a cover that almost fits is the kind that gets pressed on and cracks later. Match against the cap you removed and the parts diagram for your specific airframe. Other covers on the aircraft for radar domes and sensor windows are different parts again and are not substitutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can I make one last longer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost of the wear comes from the ground, not the air. Set the aircraft down on a mat or a tarp rather than bare soil, keep the cap out of the dust stream during battery swaps, avoid stacking anything against it during transport, rinse rather than wipe after a spray day, and get residue off before it dries hard. Storing the aircraft out of direct sun matters too, because ultraviolet hazes plastic even when nothing touches it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThere is a mark on the screen that does not move when the gimbal turns. What is it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSomething in the optical path rather than in the scene. Take the cap off and look again. If the mark disappears, it was on the cap and a fresh one solves it. If it survives cap removal, it is on the lens or inside the camera, and that is a service item rather than an accessory swap. Either way, do not attack it with a solvent while it is still unidentified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I judge when a cap is worn out if it still looks clear to me?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompare it against a new one side by side, in raking light, rather than judging it on the aircraft. Your eye adapts to gradual degradation, so the on-screen picture always looks normal enough on any given day. Holding the old and new caps together under an angled light usually ends the debate immediately, and so does the first flight after the change.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T100\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 Parts\u003c\/p\u003e\n\u003cp\u003eDJI T100 Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T100 parts USA\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70P\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70P Parts\u003c\/p\u003e\n\u003cp\u003eDJI T70P Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70P OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70P replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T70P parts USA\u003c\/p\u003e\n\u003cp\u003eDJI Agras Gimbal Lens Protection Cap Replacement\u003c\/p\u003e\n\u003cp\u003egimbal lens protection cap replacement replacement\u003c\/p\u003e\n\u003cp\u003egimbal lens protection cap replacement for sale\u003c\/p\u003e\n\u003cp\u003eDJI Gimbal Lens Protection Cap Replacement\u003c\/p\u003e\n\u003cp\u003eT100 Gimbal Lens Protection Cap Replacement\u003c\/p\u003e\n\u003cp\u003eDJI T100 Gimbal Lens Protection Cap Replacement\u003c\/p\u003e\n\u003cp\u003eT70P Gimbal Lens Protection Cap Replacement\u003c\/p\u003e\n\u003cp\u003eDJI T70P Gimbal Lens Protection Cap Replacement\u003c\/p\u003e\n\u003cp\u003eDrone Accessories\u003c\/p\u003e\n\u003cp\u003eDJI Agras Drone Accessories\u003c\/p\u003e\n\u003cp\u003eT100 Drone Accessories\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Replacement Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Repair Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Maintenance Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agricultural Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agriculture Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Spray Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Crop Sprayer Parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts\u003c\/p\u003e\n\u003cp\u003espray drone parts\u003c\/p\u003e\n\u003cp\u003eag drone parts USA\u003c\/p\u003e\n\u003cp\u003eplant protection drone parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras reseller\u003c\/p\u003e\n\u003cp\u003eDJI Agras dealer USA\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras parts online\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts free shipping\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003chr\u003e\n","brand":"Ares Acres","offers":[{"title":"Quarterly Program","offer_id":53032770830656,"sku":null,"price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t100-gimbal-lens-protection-cap-b1-3088.png?v=1794513868","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t100-gimbal-lens-protection-cap-replacement-quarterly-program","provider":"Ares Acres","version":"1.0","type":"link"}