{"product_id":"dji-agras-t100-oem-lidar-bracket","title":"DJI Agras T100 OEM LiDAR Bracket (YC.JG.YZ001068)","description":"\u003cp\u003e\u003cstrong\u003eDJI Agras T100 Parts | DJI Agras T100 OEM | DJI Agras OEM Parts | LiDAR Bracket | Obstacle Avoidance Sensor Support Frame | Navigation System Structural Component | DJI Material Number YC.JG.YZ001068\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Material Number YC.JG.YZ001068\u003c\/strong\u003e — this is the official DJI part number for this exact component. Match it to your parts diagram or the label on the original part to confirm fitment; factory labels may carry a revision suffix, which is the same part.\u003c\/p\u003e\n\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eLiDAR is what lets an operator fly tight terrain, work rolling ground, and hold height over a canopy that changes every hundred feet. That sensor is expensive — the bracket holding it is not. When the bracket cracks, the sensor is the thing that pays for it. Replace the mount and protect the module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe use specialized technicians to verify and dispatch the LiDAR Bracket ordered.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.\u003c\/p\u003e\n\u003cp\u003eThat is why Ares Acres keeps hard-to-find OEM frame \u0026amp; arm hardware in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.\u003c\/p\u003e\n\u003cp\u003eFor professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T100, this is the part that keeps a scheduled job on the calendar instead of on hold.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T100 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eDJI Agras T100 USA Version Guarantee\u003c\/li\u003e\n\u003cli\u003eDirect-fit OEM replacement — restores factory sensor mounting geometry with no modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T100 OEM LiDAR Bracket\u003c\/li\u003e\n\u003cli\u003eIntegrated sensor mounting structure\u003c\/li\u003e\n\u003cli\u003eNavigation system support frame\u003c\/li\u003e\n\u003cli\u003eOEM protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe DJI Agras T100 OEM LiDAR Bracket is a precision structural mounting component engineered to securely support and protect the aircraft's LiDAR obstacle avoidance and terrain-following sensor system. Designed specifically for the DJI Agras T100 platform, this OEM bracket serves as the primary mounting interface between the aircraft frame and the LiDAR sensor assembly.\u003c\/p\u003e\n\u003cp\u003eModern agricultural drone operations rely heavily on advanced sensing technologies to maintain safe flight operations across varying terrain, crop heights, obstacles, orchards, power lines, and field boundaries. The LiDAR system continuously scans the operating environment, helping the aircraft maintain accurate terrain following, obstacle detection, altitude control, and mission safety.\u003c\/p\u003e\n\u003cp\u003eTo perform correctly, the LiDAR sensor must remain securely mounted and precisely aligned. The OEM LiDAR Bracket helps maintain this alignment while protecting the sensor assembly from vibration, impact stress, transportation loads, and long-term operational wear.\u003c\/p\u003e\n\u003cp\u003eConstructed from DJI-spec high-strength engineered composite materials, the bracket is designed to withstand:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy agricultural flight operations\u003c\/li\u003e\n\u003cli\u003eContinuous aircraft vibration\u003c\/li\u003e\n\u003cli\u003eTerrain-following missions\u003c\/li\u003e\n\u003cli\u003eObstacle avoidance operations\u003c\/li\u003e\n\u003cli\u003eTransportation movement\u003c\/li\u003e\n\u003cli\u003eEnvironmental exposure\u003c\/li\u003e\n\u003cli\u003eTemperature fluctuations\u003c\/li\u003e\n\u003cli\u003eMoisture and humidity\u003c\/li\u003e\n\u003cli\u003eDaily commercial deployment\u003c\/li\u003e\n\u003cli\u003eLong-term field operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlthough often overlooked, the bracket serves as a mission-critical support structure for one of the aircraft's most advanced navigation systems. A damaged, cracked, bent, or improperly secured bracket may affect sensor positioning and potentially compromise obstacle avoidance performance and terrain-following accuracy.\u003c\/p\u003e\n\u003cp\u003eFor commercial operators flying in demanding agricultural environments, maintaining proper sensor mounting integrity is essential for operational safety and navigation reliability.\u003c\/p\u003e\n\u003cp\u003eThis is a navigation-system-critical OEM component essential for maintaining reliable DJI Agras T100 flight performance.\u003c\/p\u003e\n\n\u003cp\u003eClean the LiDAR window and re-test before you condemn anything structural. Dried spray film, dust bonded on by morning dew, water beading, or a scuffed window all degrade returns and produce complaints that read like a navigation fault. It costs two minutes and it is the only step in this diagnosis that can be finished before you have a tool in your hand. Rule it out first so that everything you find afterward means something.\u003c\/p\u003e\n\u003cp\u003eSeparate a mount that has shifted from a module that is failing by the character of the error, not its size. Sit the aircraft on flat, level ground and compare the height the sensor reports against a tape measure, then repeat it at two or three different heights. A reading that is steady but consistently wrong is geometry, and geometry is the bracket. A reading that jumps around while the aircraft sits still is the module, its window, or its connection.\u003c\/p\u003e\n\u003cp\u003eFly the same flat ground in opposite directions at low speed and compare. A bracket that has tilted in pitch reports terrain differently depending on which way the aircraft is pointed, because the sensor is no longer looking where the flight controller believes it is looking. Height hold that is high on one heading and low on the reciprocal is a mounting problem almost every time, even when the module passes every self-test you can run.\u003c\/p\u003e\n\u003cp\u003eMark the fasteners and let the aircraft tell you. Put a paint-pen line across each fastener head and onto the bracket beside it, fly a normal day, then look. A broken mark means that joint is moving, and on a composite bracket that usually means the mounting boss has crushed and can no longer hold preload rather than that somebody under-torqued it. This is the most useful check there is for a bracket that looks perfectly sound.\u003c\/p\u003e\n\u003cp\u003eLook for the crack before it opens. With the bracket clean, dry, and preferably off the aircraft, rake a bright light low across every surface and look for stress whitening, a milky or chalky patch in the resin that shows up well before a crack becomes visible. Check every radiused corner and the area around each mounting hole, and check whether any hole has gone oval. Whitened composite at a mounting point is a bracket on its way out.\u003c\/p\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe OEM LiDAR Bracket is designed to securely mount and support the aircraft's LiDAR sensing system. The component helps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSecure LiDAR sensor assemblies\u003c\/li\u003e\n\u003cli\u003eMaintain sensor alignment\u003c\/li\u003e\n\u003cli\u003eSupport obstacle avoidance systems\u003c\/li\u003e\n\u003cli\u003eImprove terrain-following accuracy\u003c\/li\u003e\n\u003cli\u003eReduce vibration transfer\u003c\/li\u003e\n\u003cli\u003eProtect navigation components\u003c\/li\u003e\n\u003cli\u003eImprove flight safety\u003c\/li\u003e\n\u003cli\u003eSupport mission reliability\u003c\/li\u003e\n\u003cli\u003eExtend sensor-system lifespan\u003c\/li\u003e\n\u003cli\u003eMaintain aircraft operational performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn commercial agricultural operations, navigation systems operate continuously throughout every mission. A damaged bracket may contribute to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSensor misalignment\u003c\/li\u003e\n\u003cli\u003eReduced obstacle detection accuracy\u003c\/li\u003e\n\u003cli\u003eTerrain-following inconsistencies\u003c\/li\u003e\n\u003cli\u003eExcessive vibration exposure\u003c\/li\u003e\n\u003cli\u003eNavigation-system instability\u003c\/li\u003e\n\u003cli\u003eIncreased component wear\u003c\/li\u003e\n\u003cli\u003eOperational reliability concerns\u003c\/li\u003e\n\u003cli\u003eUnexpected maintenance events\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis OEM component helps maintain dependable navigation-system performance throughout demanding agricultural deployment cycles.\u003c\/p\u003e\n\n\u003cp\u003eTake the load off the sensor before the last fastener comes out. Release the LiDAR harness from its clips and support the module by hand or with a strap, because a module allowed to swing on its cable damages its own connector and can crack its window against the airframe. Undo the bracket fasteners in stages and keep a hand on the assembly throughout, rather than discovering how heavy it is at the moment it is free.\u003c\/p\u003e\n\u003cp\u003eLay the fasteners out in the order and position they came from, on a strip of tape. Agras brackets frequently use more than one fastener length in one hole pattern, and a long screw in a shallow boss bottoms on the thread before it clamps anything. It feels tight in your hand and reads correct on the wrench, and it is holding nothing. Note every washer, spacer, or isolator as well, since a missing one changes where the sensor points.\u003c\/p\u003e\n\u003cp\u003eClean both mating faces before the new bracket goes anywhere near them. Dried spray residue, fertiliser crust, or grit trapped between the bracket and the frame acts as a shim, and a shim under one corner tilts the sensor by exactly the amount you are trying to eliminate. Wipe the frame face and the back of the bracket, check that nothing is raised or burred around the holes, and let both dry before assembly.\u003c\/p\u003e\n\u003cp\u003ePull the bracket down square by working around the pattern in stages, not by taking one fastener to final torque and moving on. Bring every fastener to a light snug first, then work up to the DJI figure in a cross or alternating sequence. A composite bracket dragged down at one corner first is locked into a twist, and that twist is a fixed angular error in every terrain reading the aircraft takes from then on.\u003c\/p\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplacement may be recommended when operators observe:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCracked bracket housing\u003c\/li\u003e\n\u003cli\u003eStructural deformation\u003c\/li\u003e\n\u003cli\u003eImpact damage\u003c\/li\u003e\n\u003cli\u003eBroken mounting points\u003c\/li\u003e\n\u003cli\u003eSensor alignment concerns\u003c\/li\u003e\n\u003cli\u003eExcessive vibration\u003c\/li\u003e\n\u003cli\u003ePhysical wear\u003c\/li\u003e\n\u003cli\u003eTransportation damage\u003c\/li\u003e\n\u003cli\u003eMaintenance inspection findings\u003c\/li\u003e\n\u003cli\u003ePreventative maintenance replacement requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eField diagnostic:\u003c\/strong\u003e LiDAR complaints that started after a hard landing, a strike, or a rough haul are mounting problems until proven otherwise. Grab the sensor assembly and try to move it — any rock, flex, or creak means the bracket or its fasteners are no longer holding position, and a sensor that moves in flight reports terrain that is not there. Height hold that hunts, terrain following that reads inconsistently over ground you have flown a hundred times, or obstacle calls that come late are all consistent with a mount that has shifted a few degrees. Inspect the mounting bosses and radiused corners with the bracket clean and dry; that is where composite cracks start. Do not shim, glue, or bend a damaged sensor mount back into position — alignment you restored by hand is alignment you cannot trust at working altitude over a customer's field.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat actually kills these brackets:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImpact loading from hard landings, strikes, and ground contact\u003c\/li\u003e\n\u003cli\u003eVibration fatigue cracking at mounting bosses over long service hours\u003c\/li\u003e\n\u003cli\u003eTransport and handling stress during loading, hauling, and storage\u003c\/li\u003e\n\u003cli\u003eOver-torqued fasteners crushing and crazing the mounting points\u003c\/li\u003e\n\u003cli\u003eUV and chemical exposure embrittling the composite over seasons\u003c\/li\u003e\n\u003cli\u003eRepeated removal and reinstallation during service work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePost-install checklist:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the airframe mounting surface for damage before fitting the new bracket\u003c\/li\u003e\n\u003cli\u003eStart all fasteners before torquing any of them so the bracket seats square\u003c\/li\u003e\n\u003cli\u003eTorque to the manufacturer's specification — do not overtighten composite mounts\u003c\/li\u003e\n\u003cli\u003eConfirm the sensor sits at the correct angle with no rock or flex by hand\u003c\/li\u003e\n\u003cli\u003eClean the LiDAR window and confirm nothing obstructs the field of view\u003c\/li\u003e\n\u003cli\u003eRoute and secure the sensor harness clear of chafe points and moving structure\u003c\/li\u003e\n\u003cli\u003ePower up and confirm the sensor reports healthy with no navigation faults\u003c\/li\u003e\n\u003cli\u003eFly a low, slow terrain-following pass and verify consistent height hold before working a field\u003c\/li\u003e\n\u003cli\u003eRecheck fastener torque after the first few loaded missions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eObstacle avoidance triggers on empty air with nothing ahead of the aircraft. A mount that has rotated far enough can put part of the airframe, a boom, or the landing gear into the edge of the sensor's field of view, and the aircraft reacts to it exactly as it would to a real obstacle. Persistent false calls in open ground, with the window clean, point at where the sensor is aimed rather than at whether it is working.\u003c\/p\u003e\n\u003cp\u003eRecalibration cures it for a flight or two and then it drifts back. That pattern is mechanical and there is no software fix for it. Calibration can absorb a fixed offset, but it cannot absorb a joint that moves under load and settles somewhere new each time the aircraft lands. A fault that keeps returning after a clean calibration is a joint that is not holding position.\u003c\/p\u003e\n\u003cp\u003eThe same fastener needs re-torquing every time you check it. The threads are usually not the problem; the composite boss under the fastener head has crushed and lost its ability to hold preload. Re-torquing repacks it for a short time and crushes it further. Once a mounting point has started doing this it will not recover, and the bracket is finished regardless of how sound the rest of it looks.\u003c\/p\u003e\n\u003cp\u003eYou hear a creak, tick, or click near the sensor when handling the aircraft on the ground. Composite that is intact and properly clamped is silent. Noise from a mounting area under hand load is either a joint sliding because preload is gone or a crack faces working against each other, and both mean the bracket is no longer holding the sensor where it was set.\u003c\/p\u003e\n\u003cp\u003eTrouble that shows up after a haul rather than after a flight. Look at how the aircraft is loaded and strapped: a strap run across or near the sensor area, or an aircraft that shifts against a trailer wall, puts loads into a bracket that was designed to carry a sensor in flight and nothing else. Transport damage is common on this class of part and it very rarely leaves a mark on the outside.\u003c\/p\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Material Number (SKU): YC.JG.YZ001068\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e LiDAR mounting bracket \/ sensor support frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e DJI Agras T100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Area:\u003c\/strong\u003e Aircraft navigation and obstacle avoidance system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e LiDAR sensor mounting and structural support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e DJI-spec reinforced engineered composite material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Direct-fit OEM replacement component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Agricultural drone navigation and terrain-following systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFastener Torque and Sizes:\u003c\/strong\u003e Not published in this listing. Use the DJI service figure for this mounting with a calibrated driver, and reuse the exact fastener lengths that came out of each hole. A composite mounting boss is unforgiving in both directions: under-torqued it lets the sensor move, and over-torqued once it is permanently crushed and will never hold preload again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBracket Dimensions and Hole Pattern:\u003c\/strong\u003e Not published. Compare the removed bracket against the photographs on this page for outline, depth, hole count and hole spacing before ordering, and check whether your part is handed. If your airframe carries more than one sensing module, confirm which position this bracket serves rather than assuming similar-looking mounts interchange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Described as DJI-spec reinforced engineered composite. The specific resin system, fibre type and layup are not published, which matters practically: do not drill it, do not file a hole to make a fastener line up, and do not apply solvent-based cleaners or thread locker to it unless DJI documentation for your model calls for it.\u003c\/p\u003e\n\u003ch2\u003e🧰 Fitment Verification Before You Order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing is DJI material number YC.JG.YZ001068.\u003c\/strong\u003e That number, not the description, is what makes a part match. Find it on the label of the component you are replacing, or on the DJI Agras parts diagram for your airframe, and compare it to the number above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRevision suffixes are still the same part.\u003c\/strong\u003e DJI labels sometimes carry a trailing revision such as \u003cem\u003e.01\u003c\/em\u003e, \u003cem\u003e.02\u003c\/em\u003e, or \u003cem\u003e.F\u003c\/em\u003e. Those denote a production revision, not a different component. Match the base number and disregard the suffix.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisually similar is not the same.\u003c\/strong\u003e DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerified fitment for this listing:\u003c\/strong\u003e DJI Agras T100. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure?\u003c\/strong\u003e Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Handling Notes\u003c\/h2\u003e\n\u003cp\u003eThese are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower down completely and disconnect the flight batteries\u003c\/strong\u003e before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhotograph the assembly before you disturb it.\u003c\/strong\u003e Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the LiDAR Bracket is easier to fit correctly when you can see how the original sat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque to DJI specification.\u003c\/strong\u003e Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the mating surfaces and seals while you are in there.\u003c\/strong\u003e A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest before you spray.\u003c\/strong\u003e Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.\u003c\/p\u003e\n\u003cp\u003eIf the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis component is essential inventory for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial DJI Agras T100 operators\u003c\/li\u003e\n\u003cli\u003eAgricultural spraying contractors\u003c\/li\u003e\n\u003cli\u003eHigh-hour flight fleets\u003c\/li\u003e\n\u003cli\u003eAgricultural aviation providers\u003c\/li\u003e\n\u003cli\u003eDrone repair technicians\u003c\/li\u003e\n\u003cli\u003eFleet maintenance managers\u003c\/li\u003e\n\u003cli\u003eNavigation-system rebuild projects\u003c\/li\u003e\n\u003cli\u003ePreventative maintenance programs\u003c\/li\u003e\n\u003cli\u003eAgricultural service providers\u003c\/li\u003e\n\u003cli\u003eProfessional DJI Agras repair facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMaintaining spare mounting components can significantly reduce downtime when sensor-system damage is discovered during routine maintenance.\u003c\/p\u003e\n\n\u003cp\u003eKnow what this part is and where it stops. It is the structure between the airframe and the sensing module, and it fixes faults caused by that structure moving or breaking. It is not the sensor, not the sensor's own housing or window cover, and not a vibration isolator assembly. If the module reads erratically while sitting perfectly still on a bench with a clean window, a new bracket will not change anything.\u003c\/p\u003e\n\u003cp\u003eCheck the bracket you removed against the new one before you fit it, not after. Set them back to back and confirm the outline, depth, hole count, hole spacing, and any offset or bend all match, and confirm which way round it goes if the shape is close to symmetrical. Small composite mounts on an Agras airframe look alike in a photograph and differ in the one dimension that decides where the sensor points.\u003c\/p\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eEvery DJI Agras T100 mission depends on one critical requirement: accurate environmental awareness. The aircraft's LiDAR system helps provide the obstacle avoidance and terrain-following capabilities operators rely on every day.\u003c\/p\u003e\n\u003cp\u003eThe OEM LiDAR Bracket helps maintain:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate sensor positioning\u003c\/li\u003e\n\u003cli\u003eReliable obstacle detection\u003c\/li\u003e\n\u003cli\u003eConsistent terrain following\u003c\/li\u003e\n\u003cli\u003eReduced vibration exposure\u003c\/li\u003e\n\u003cli\u003eImproved flight safety\u003c\/li\u003e\n\u003cli\u003eLong-term sensor protection\u003c\/li\u003e\n\u003cli\u003eBetter operational reliability\u003c\/li\u003e\n\u003cli\u003eMaximum aircraft uptime\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWithout a properly functioning bracket, operators risk:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSensor misalignment\u003c\/li\u003e\n\u003cli\u003eReduced obstacle avoidance accuracy\u003c\/li\u003e\n\u003cli\u003eTerrain-following errors\u003c\/li\u003e\n\u003cli\u003eIncreased sensor wear\u003c\/li\u003e\n\u003cli\u003eHigher maintenance costs\u003c\/li\u003e\n\u003cli\u003eReduced operational confidence\u003c\/li\u003e\n\u003cli\u003eUnexpected downtime\u003c\/li\u003e\n\u003cli\u003eCompromised mission performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProfessional DJI Agras operators understand that advanced navigation systems are only as reliable as the components supporting them. Using the DJI Agras T100 OEM LiDAR Bracket helps protect critical navigation hardware, maintain safe flight operations, and reduce costly interruptions throughout demanding commercial agricultural operations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount the sensor. Hold the alignment. Read the terrain. Fly it safe.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kind of part does not wear out gradually; it takes an event and then fails later. A hard landing, a strike, a prop-wash-driven whip on a rough haul, or a single over-torqued fastener puts damage in that may not change anything measurable for weeks. That is why a hard landing is worth an inspection even when the LiDAR reads correctly afterward, and why stress whitening found on a routine check is worth acting on before it becomes a crack.\u003c\/p\u003e\n\u003cp\u003eHandle the replacement like the precision part it is. Unwrap it and inspect it before the aircraft is apart, check the hole pattern against the old one, and keep it off concrete, since a dropped composite bracket can carry an internal crack with nothing showing on the surface. Once fitted, plan to re-check the fastener torque after the first working day, because a fresh composite joint settles and sheds a little preload as it beds in.\u003c\/p\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T100 OEM LiDAR Bracket (YC.JG.YZ001068)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e LiDAR Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI material number:\u003c\/strong\u003e YC.JG.YZ001068\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct category:\u003c\/strong\u003e Frame \u0026amp; Arm Hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible aircraft:\u003c\/strong\u003e DJI Agras T100\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Genuine DJI OEM replacement component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new — never installed, never flown\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 × DJI Agras T100 OEM LiDAR Bracket Integrated sensor mounting structure Naviga\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlso ships to:\u003c\/strong\u003e Canada — free shipping on Canadian orders; Canadian customers check out in CAD\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e DJI Agras T100 LiDAR Bracket; T100 LiDAR Bracket; DJI T100 lidar bracket replacement; DJI Agras LiDAR Bracket; LiDAR Bracket OEM; LiDAR Bracket replacement part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDefinition:\u003c\/strong\u003e The LiDAR Bracket is the genuine DJI OEM component supplied for the DJI Agras T100, sold new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. Confirm the aircraft model is DJI Agras T100 before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T100\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 Parts\u003c\/p\u003e\n\u003cp\u003eDJI T100 Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T100 parts USA\u003c\/p\u003e\n\u003cp\u003eDJI Agras LiDAR Bracket\u003c\/p\u003e\n\u003cp\u003eLiDAR Bracket OEM\u003c\/p\u003e\n\u003cp\u003elidar bracket replacement\u003c\/p\u003e\n\u003cp\u003elidar bracket for sale\u003c\/p\u003e\n\u003cp\u003eDJI LiDAR Bracket\u003c\/p\u003e\n\u003cp\u003eT100 LiDAR Bracket\u003c\/p\u003e\n\u003cp\u003eDJI T100 LiDAR Bracket\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 LiDAR Bracket OEM\u003c\/p\u003e\n\u003cp\u003eFrame \u0026amp; Arm Hardware\u003c\/p\u003e\n\u003cp\u003eDJI Agras Frame \u0026amp; Arm Hardware\u003c\/p\u003e\n\u003cp\u003eT100 Frame \u0026amp; Arm Hardware\u003c\/p\u003e\n\u003cp\u003eYC.JG.YZ001068\u003c\/p\u003e\n\u003cp\u003eDJI YC.JG.YZ001068\u003c\/p\u003e\n\u003cp\u003eYC.JG.YZ001068 OEM\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Replacement Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Repair Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Maintenance Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agricultural Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agriculture Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Spray Drone Parts\u003c\/p\u003e\n\u003cp\u003eDJI Crop Sprayer Parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts\u003c\/p\u003e\n\u003cp\u003espray drone parts\u003c\/p\u003e\n\u003cp\u003eag drone parts USA\u003c\/p\u003e\n\u003cp\u003eplant protection drone parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras reseller\u003c\/p\u003e\n\u003cp\u003eDJI Agras dealer USA\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras parts online\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts free shipping\u003c\/p\u003e\n\u003cp\u003eagricultural drone parts same day shipping\u003c\/p\u003e\n\u003cp\u003eAres Acres\u003c\/p\u003e\n\u003cp\u003eAres Acres LLC\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100 OEM LiDAR Bracket (YC.JG.YZ001068) Canada\u003c\/p\u003e\u003cp\u003eDJI Agras T100 parts Canada\u003c\/p\u003e\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\u003cp\u003ebuy DJI Agras T100 parts in Canada\u003c\/p\u003e\u003chr\u003e\n\u003ch2\u003e🚚 Shipping, Returns \u0026amp; Support\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFree and fast shipping within the United States\u003c\/strong\u003e on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship from the U.S., not from overseas.\u003c\/strong\u003e That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGenuine OEM only.\u003c\/strong\u003e Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts, and we do not relabel. If a listing says OEM, that is what ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdered the wrong part?\u003c\/strong\u003e Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed help identifying a part?\u003c\/strong\u003e Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFleet and dealer volume:\u003c\/strong\u003e operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the DJI material number (part number) for the Agras T100 LiDAR bracket?\u003c\/strong\u003e The official DJI material number is YC.JG.YZ001068. Match it to your parts diagram or the label on the original part to confirm exact fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T100 LiDAR bracket?\u003c\/strong\u003e It is the OEM structural mounting component that attaches the DJI Agras T100's LiDAR obstacle avoidance and terrain-following sensor assembly to the aircraft frame, holding the sensor securely aligned through vibration, impacts, and transport. It carries DJI material number YC.JG.YZ001068.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does this bracket fit?\u003c\/strong\u003e Per its specifications, it is a direct-fit OEM replacement for the DJI Agras T100, restoring the factory sensor mounting geometry with no modification required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy LiDAR started acting up after a hard landing — is it the sensor or the bracket?\u003c\/strong\u003e Treat LiDAR complaints that started after a hard landing, a strike, or a rough haul as mounting problems until proven otherwise. Grab the sensor assembly and try to move it — any rock, flex, or creak means the bracket or its fasteners are no longer holding position. A sensor that moves in flight reports terrain that is not there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat flight symptoms point to a damaged LiDAR bracket?\u003c\/strong\u003e Height hold that hunts, terrain following that reads inconsistently over ground you have flown many times, and obstacle calls that come late are all consistent with a mount that has shifted a few degrees, even when the sensor module itself is healthy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I repair a cracked or bent LiDAR bracket instead of replacing it?\u003c\/strong\u003e No. Do not shim, glue, or bend a damaged sensor mount back into position — alignment restored by hand is alignment you cannot trust at working altitude over a customer's field. Inspect the mounting bosses and radiused corners clean and dry; that is where composite cracks start.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat damages LiDAR brackets on agricultural drones?\u003c\/strong\u003e Impact loading from hard landings and strikes, vibration fatigue at the mounting bosses over long service hours, transport and handling stress, over-torqued fasteners crushing the composite mounting points, and UV and chemical exposure embrittling the material over seasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I verify after installing a new LiDAR bracket?\u003c\/strong\u003e Start all fasteners before torquing any so the bracket seats square, torque to specification, confirm the sensor has no rock or flex by hand, clean the LiDAR window, secure the harness clear of chafe points, then fly a low, slow terrain-following pass and verify consistent height hold before working a field.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine DJI OEM LiDAR Bracket?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. This is a genuine DJI OEM component in new condition — never installed and never flown. Ares Acres LLC is a U.S.-based authorized DJI Agras reseller. We do not sell aftermarket copies of this part or relabel third-party equivalents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my aircraft?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part is supplied for the DJI Agras T100. Confirm by matching DJI material number YC.JG.YZ001068 against the label on your original part or your model's DJI Agras parts diagram. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow fast does it ship, and where does it ship from?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install the LiDAR Bracket myself?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMany operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I order the wrong part?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eContact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you stock other parts for this aircraft?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe LiDAR reading jumps around even with the aircraft sitting still. Is that the bracket?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProbably not. A bracket holds a fixed position, so the error it causes is steady and repeatable, not noisy. A reading that moves while the aircraft is stationary points at the window, the module, or its connection. Clean the window, check the harness and connector for damage and moisture, and look for a reading that is wrong but stable, which is the signature of a mounting problem rather than a sensor problem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA fastener at one corner will not stay tight. Can I just use thread locker and keep flying?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo. Repeated loosening at one hole almost always means the composite boss under that fastener has crushed and can no longer hold clamp load, and thread locker will keep the screw from backing out while the joint underneath still moves. Do not add thread locker to a composite mounting unless the DJI documentation for your model calls for it, since some formulations attack plastics and composites. Replace the bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy terrain following reads high flying one direction and low flying back. What causes that?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThat is the classic signature of a sensor mount that has tilted in pitch. The module itself is fine and reports what it sees, but it is no longer looking where the flight controller assumes, so the error reverses sign when the aircraft reverses heading. Inspect the bracket, its mounting faces, and its fasteners rather than recalibrating, because calibration cannot correct an angle that keeps changing under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the DJI Agras T100 OEM LiDAR Bracket (YC.JG.YZ001068) also available in Canada?\u003c\/strong\u003e Yes. Ares Acres ships this T100 OEM LiDAR Bracket to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Ares Acres ship DJI Agras T100 parts to Canadian operators?\u003c\/strong\u003e Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a DJI Agras T100 OEM LiDAR bracket in the USA?\u003c\/strong\u003e Ares Acres LLC, a U.S.-based authorized DJI Agras retailer, stocks this OEM bracket with FREE \u0026amp; FAST shipping for all U.S. customers and Same Day Shipping \u0026amp; Tracking on in-stock orders. This part is listed under DJI material number YC.JG.YZ001068. Ares Acres also ships to Canada with free shipping.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T100","offer_id":52512075022656,"sku":"YC.JG.YZ001068","price":64.99,"currency_code":"USD","in_stock":true},{"title":"DJI T70P","offer_id":52512075055424,"sku":"YC.JG.YZ001068","price":64.99,"currency_code":"USD","in_stock":true},{"title":"DJI T55","offer_id":52857423102272,"sku":"YC.JG.YZ001068","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/7DE132EC-8EF2-4A55-AFC9-49D68FCD17A0.png?v=1782086222","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t100-oem-lidar-bracket","provider":"Ares Acres","version":"1.0","type":"link"}