{"product_id":"dji-agras-t100s-oem-rear-crossbar","title":"DJI Agras T100S OEM Rear Crossbar","description":"\u003cp\u003eThe DJI Agras T100S OEM Rear Crossbar is a reinforced aluminum bar that runs between the two rear landing gear legs of the aircraft and ties them together. It is a long, straight black bar with a clamp collar at each end, and in the product images it is fitted low across the rear of the landing gear, each collar closed around one leg above the curve where the leg turns into its foot. It belongs to the aircraft's frame and landing gear, and it is identified for the DJI Agras T100S and T70S. Operators usually reach it while searching for a T100S rear crossbar, a T70S landing gear brace, a T100S rear leg reinforcement bar, or a way to stop the rear legs of a T100S working apart on rough ground. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T100S \/ DJI Agras T70S Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T100S and T70S rear landing gear\u003c\/li\u003e\n\u003cli\u003eMatched by bar length, end-clamp form and leg position against the crossbar you removed or the legs you are fitting it to\u003c\/li\u003e\n\u003cli\u003eBrand new aluminum frame part, supplied as one bar with its two end clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA rear crossbar is matched by the aircraft and by the legs it clamps to. If you want the match confirmed, photograph the rear of the landing gear from behind with both legs in frame, plus a close view of where a collar sits, and send it to us. We will match it for you.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Rear Crossbar: a reinforced aluminum bar with a clamp collar at each end, as described for this part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is one crossbar.\u003c\/strong\u003e The two end clamps are part of the crossbar as shown in the product images.\u003c\/p\u003e\n\u003cp\u003eNot included: the landing gear legs, the factory rear landing gear crossbeam, feet, leg tubes, the frame above the legs, or any tools. Whether separate fixing screws travel with the bar is not published for this part, so plan to use sound screws of the same type as the collars carry if any are missing.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the bar in the product images. The aircraft, legs and frame shown around it are there to show where it fits.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eThe rear crossbar is a brace. Landing gear legs carry the full weight of a loaded aircraft every time it sets down, and on a rough field edge, a sloped headland or a loading trailer that load does not always arrive straight down. A bar that ties the two rear legs together low down shares the side load between them, so one leg is not left to take it alone.\u003c\/p\u003e\n\u003cp\u003eWhat it is, as described for this part:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe bar\u003c\/strong\u003e — a long, straight, reinforced aluminum bar, black in the product images\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe left end clamp\u003c\/strong\u003e — a collar that closes around one rear leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe right end clamp\u003c\/strong\u003e — a matching collar that closes around the other rear leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe clamp fixings\u003c\/strong\u003e — the screws that close each collar on its leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe fitted position\u003c\/strong\u003e — low across the rear legs, above the curve where each leg turns into its foot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is a separate part from the factory rear landing gear crossbeam that sits higher on the gear. The two can be on the aircraft together: the factory crossbeam is part of the landing gear as built, and the rear crossbar is an added tie lower down.\u003c\/p\u003e\n\u003cp\u003eOver a season the crossbar sees:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSide load on every landing, more on slopes and uneven ground\u003c\/li\u003e\n\u003cli\u003eVibration from the airframe on every flight\u003c\/li\u003e\n\u003cli\u003eSpray drift, dust and granule residue settling on the bar and in the collars\u003c\/li\u003e\n\u003cli\u003eWash water during cleaning between jobs\u003c\/li\u003e\n\u003cli\u003eKnocks from loading, transport tie-downs and field obstacles\u003c\/li\u003e\n\u003cli\u003eRepeated clamping and unclamping if the gear is serviced often\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA crossbar in this position comes off for a few real reasons: a bar bent by a hard landing or a strike from a post or a trailer edge, a collar cracked or stripped so it no longer closes on the leg, or a bar fitted for the first time to legs that have been working apart.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe crossbar's engineering role is to tie the two rear legs together so they move as a pair. Its whole job is geometry: it holds the distance between the legs at the height it is clamped.\u003c\/p\u003e\n\u003cp\u003eIn the frame and landing gear it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds the two rear legs at a fixed spacing at the clamped height\u003c\/li\u003e\n\u003cli\u003eShares side load from one rear leg into the other\u003c\/li\u003e\n\u003cli\u003eResists the rear legs spreading apart or pulling together under load\u003c\/li\u003e\n\u003cli\u003eAdds a second tie below the factory crossbeam higher on the gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not straighten a leg that is already bent\u003c\/li\u003e\n\u003cli\u003eIt does not repair a cracked leg, foot or leg joint\u003c\/li\u003e\n\u003cli\u003eIt is not the factory rear landing gear crossbeam and does not replace it\u003c\/li\u003e\n\u003cli\u003eIt does not touch the spray, spreading, power or flight systems\u003c\/li\u003e\n\u003cli\u003eIt does not change how the aircraft flies; it only braces the gear it stands on\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA brace works only on sound legs at the right spacing. Clamped onto a bent leg, it holds the bend in place rather than correcting it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the bar braces sound legs and cannot true bent ones\u003c\/h2\u003e\n\u003cp\u003eA crossbar is usually bought for one of two reasons: the old one is damaged, or the rear legs of the aircraft have been working apart. In both cases the legs come first, because a new bar clamped to a bent leg only locks the fault in.\u003c\/p\u003e\n\u003cp\u003eFirst, stand the aircraft on a flat floor, unloaded, and look at it from behind. The two rear legs should be symmetrical, with both feet flat on the floor. A leg that leans out, a foot that rocks or a gap under one foot points at a leg or foot problem, not a crossbar one.\u003c\/p\u003e\n\u003cp\u003eThen check the legs themselves. Look along each rear leg for a bend, a kink at the curve, a crack at a joint or a crushed section where a collar sits. Run a hand along the tube and feel for flats and ridges.\u003c\/p\u003e\n\u003cp\u003eThen the factory crossbeam and leg joints higher up. A loose joint at the top of a leg lets the whole leg swing, and a bar lower down cannot hold it.\u003c\/p\u003e\n\u003cp\u003eIf the legs are straight, the feet sit flat and the joints are tight, a damaged crossbar or a missing one is the part. If a leg is bent or cracked, replace the leg first and fit the crossbar after.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSigns the crossbar itself is the part:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA bar that is visibly bent or kinked\u003c\/li\u003e\n\u003cli\u003eA collar cracked, split or stripped so it no longer grips the leg\u003c\/li\u003e\n\u003cli\u003eA collar that slides on the leg with its fixing tight\u003c\/li\u003e\n\u003cli\u003eRear legs that are sound but flex apart under load, with no crossbar fitted low on the gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBefore replacing the crossbar, rule out what imitates it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA bent rear leg\u003c\/strong\u003e — the bar cannot straighten it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA loose leg joint at the frame\u003c\/strong\u003e — tighten or repair the joint first\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA damaged foot\u003c\/strong\u003e — makes the aircraft sit crooked with straight legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe factory crossbeam\u003c\/strong\u003e — a cracked or loose factory crossbeam higher on the gear is a separate part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse the flat floor as your evidence.\u003c\/strong\u003e Straight legs, flat feet and tight joints mean the crossbar is the remaining question. Anything else is answered first.\u003c\/p\u003e\n\u003cp\u003eThose checks take minutes on a level floor and decide whether the bar fixes the problem or hides it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace or fit the rear crossbar when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA bent, kinked or dented bar\u003c\/li\u003e\n\u003cli\u003eA cracked or split end collar\u003c\/li\u003e\n\u003cli\u003eA collar that will not hold its position on the leg with the fixing tight\u003c\/li\u003e\n\u003cli\u003eStripped threads in a collar fixing\u003c\/li\u003e\n\u003cli\u003eSound rear legs that flex apart on landing, with no low crossbar fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach rear leg, for a bend, kink or crack\u003c\/li\u003e\n\u003cli\u003eThe leg joints at the frame, for play\u003c\/li\u003e\n\u003cli\u003eThe feet, for damage that tips the aircraft\u003c\/li\u003e\n\u003cli\u003eThe factory rear landing gear crossbeam, for cracks or loose fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is no published service interval for the crossbar. It is replaced when it is bent or its collars no longer grip, not on a schedule.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T100S OEM Rear Crossbar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T100S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T70S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T100S and T70S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Frame — rear landing gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Rear crossbar (landing gear brace)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 crossbar with two end clamps\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Long straight bar with a clamp collar at each end\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum (reinforced)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBar length:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad rating:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Across the two rear landing gear legs, low, above the curve of each leg\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Each end collar closed around one rear leg and fixed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixing torque:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e The two end clamps; separate fixing screws not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — a structural part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e Agras frame and landing gear part\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft down, remove the battery and empty the tank\u003c\/li\u003e\n\u003cli\u003eStand the aircraft on a flat floor and confirm both rear legs are straight and both feet sit flat\u003c\/li\u003e\n\u003cli\u003eCheck the leg joints at the frame and the factory crossbeam for play or cracks\u003c\/li\u003e\n\u003cli\u003eIf you are replacing a crossbar, photograph the old one in place from behind, showing the height of each collar\u003c\/li\u003e\n\u003cli\u003eClean dirt and residue from the legs where the collars will sit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport the aircraft so the rear legs are not carrying load while you work\u003c\/li\u003e\n\u003cli\u003eLoosen and remove the old crossbar, if fitted, without levering against the legs\u003c\/li\u003e\n\u003cli\u003eOffer the new bar up at the same height on both legs, so it sits level when viewed from behind\u003c\/li\u003e\n\u003cli\u003eClose each collar around its leg and start the fixings by hand\u003c\/li\u003e\n\u003cli\u003eTighten the fixings evenly side to side; no torque figure is published, so snug them firmly without crushing the leg tube\u003c\/li\u003e\n\u003cli\u003eCheck that neither collar sits over a joint, a cable or a dent in the leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSet the aircraft down on the flat floor and confirm both feet sit flat\u003c\/li\u003e\n\u003cli\u003eLook from behind: the bar should be level and the legs symmetrical\u003c\/li\u003e\n\u003cli\u003ePush each rear leg gently outward and inward and confirm the collars do not slide\u003c\/li\u003e\n\u003cli\u003eRecheck the fixings after the first few flights\u003c\/li\u003e\n\u003cli\u003eRecord the fitting in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e Wash residue out of the collars, look along the bar for bends after any hard landing, and check the collars have not crept up or down the legs. A collar that moves is a collar to reset before the next flight, not after it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis crossbar is for operators and technicians bracing or repairing the rear landing gear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T100S operators with a bent bar or a cracked collar\u003c\/li\u003e\n\u003cli\u003eDJI Agras T70S operators (identified fitment)\u003c\/li\u003e\n\u003cli\u003eCommercial applicators landing on slopes, headlands and rough field edges\u003c\/li\u003e\n\u003cli\u003eCrews whose aircraft ride on trailers and take knocks to the gear in transport\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding rear landing gear after an impact\u003c\/li\u003e\n\u003cli\u003eGrowers flying their own fields from uneven ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA rear leg is bent or cracked — replace the leg first; the bar cannot true it\u003c\/li\u003e\n\u003cli\u003eA leg joint at the frame is loose — repair the joint\u003c\/li\u003e\n\u003cli\u003eThe factory rear landing gear crossbeam higher on the gear is damaged — that is a separate part, and on the T55 it is the T55 OEM Rear Landing Gear Crossbeam\u003c\/li\u003e\n\u003cli\u003eYou fly a T100 — the T100 OEM Landing Gear Cross Beam (Rear) belongs to that aircraft\u003c\/li\u003e\n\u003cli\u003eYou fly a T55, T70P, T60 or T50 — this crossbar is identified only for the T100S and T70S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eLanding gear does its work every time the aircraft sets down, and the rear legs take their share of a loaded aircraft on whatever ground the crew lands on. When the two rear legs are tied together low down, a side load on one is shared with the other.\u003c\/p\u003e\n\u003cp\u003eThe case for the crossbar is geometry, not strength on its own. A bar can only hold what it is clamped to. On two straight legs at the right spacing it keeps them that way. On a bent leg it holds the bend. That is why the legs are checked on a flat floor first, and why a damaged leg is replaced before the bar goes on.\u003c\/p\u003e\n\u003cp\u003eWithin that case it is simple to judge. A bent bar or a collar that slides is a crossbar that has stopped bracing anything, and a new one restores the tie. Sound legs that flex apart with no low crossbar fitted are legs that can use one.\u003c\/p\u003e\n\u003cp\u003eA few minutes on a level floor decides which of those you have, and whether the bar is the repair or only part of it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T100S OEM Rear Crossbar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary aircraft:\u003c\/strong\u003e DJI Agras T100S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso identified for:\u003c\/strong\u003e DJI Agras T70S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T100S; DJI Agras T70S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T100S and T70S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Rear crossbar (rear landing gear brace)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Frame and landing gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalled position:\u003c\/strong\u003e Across the two rear landing gear legs, low on the gear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Ties the two rear legs together and shares side load between them\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Straight reinforced aluminum bar with a clamp collar at each end\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 crossbar with two end clamps\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Landing gear legs, factory crossbeam, feet, frame, tools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Stand the aircraft on a flat floor; straight legs, flat feet and tight joints first, then the bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Bent bar, cracked collar, collar sliding on the leg\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e Agras frame and landing gear part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T100S rear crossbar; T70S rear crossbar; T100S landing gear brace; T100S rear leg reinforcement bar; DJI T100S\/T70S aluminum crossbar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not the factory rear landing gear crossbeam, not the T55 OEM Rear Landing Gear Crossbeam, not the T100 OEM Landing Gear Cross Beam (Rear)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T100S Rear Crossbar\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70S Rear Crossbar\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100S\/T70S rear crossbar\u003c\/p\u003e\n\u003cp\u003eT100S landing gear brace\u003c\/p\u003e\n\u003cp\u003eT70S landing gear brace\u003c\/p\u003e\n\u003cp\u003eT100S aluminum crossbar\u003c\/p\u003e\n\u003cp\u003eT100S rear leg reinforcement\u003c\/p\u003e\n\u003cp\u003eT100S rear landing gear bar\u003c\/p\u003e\n\u003cp\u003eT70S rear landing gear bar\u003c\/p\u003e\n\u003cp\u003eAgras T100S Rear Crossbar\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100S OEM Rear Crossbar\u003c\/p\u003e\n\u003cp\u003eAgras T100S rear crossbar replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100S parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100S replacement parts\u003c\/p\u003e\n\u003cp\u003eAgras T70S Rear Crossbar\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70S OEM Rear Crossbar\u003c\/p\u003e\n\u003cp\u003eAgras T70S rear crossbar replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70S parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T70S replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100S frame parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras landing gear parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100S Rear Crossbar Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T100S parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T100S parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T100S rear crossbar?\u003c\/strong\u003e A reinforced aluminum bar with a clamp collar at each end that ties the two rear landing gear legs together, low on the gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T100S and T70S. Pick the variant for the aircraft you fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed. Photograph the rear of your landing gear and send it to us if you want that confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the rear landing gear crossbeam?\u003c\/strong\u003e No. The factory crossbeam sits higher on the gear and is part of the landing gear as built. This crossbar is a separate tie that clamps across the rear legs lower down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it with the factory crossbeam still in place?\u003c\/strong\u003e Yes. In the product images it is fitted below the factory crossbeam, with both on the aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy rear leg is bent. Will the crossbar straighten it?\u003c\/strong\u003e No. A crossbar holds the legs where they are. Clamped to a bent leg it locks the bend in. Replace the leg first, then fit the bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know the legs are sound enough for it?\u003c\/strong\u003e Stand the unloaded aircraft on a flat floor. Both rear legs should look symmetrical from behind, both feet should sit flat, and the leg joints at the frame should have no play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e Aluminum, reinforced. Dimensions, weight and a load rating are not published for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e The two end clamps are part of the crossbar. Whether separate fixing screws travel with it is not published, so keep sound screws of the same type to hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a torque figure for the collars?\u003c\/strong\u003e None is published. Tighten them evenly and firmly without crushing the leg tube, and recheck them after the first few flights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the T55 or T100?\u003c\/strong\u003e It is identified only for the T100S and T70S. The T55 has its own T55 OEM Rear Landing Gear Crossbeam, and the T100 has the T100 OEM Landing Gear Cross Beam (Rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it change how the aircraft flies?\u003c\/strong\u003e No. It braces the landing gear the aircraft stands on and touches no flight, spray or spreading system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Most operators can. Support the aircraft, set the bar level at the same height on both legs, close the collars, tighten them evenly and check the feet sit flat afterwards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I keep it working?\u003c\/strong\u003e Wash residue out of the collars, check the bar for bends after hard landings and make sure the collars have not crept along the legs.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T100S","offer_id":68087147168064,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true},{"title":"DJI T70S","offer_id":68087147200832,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/Stock_ef8d5c5a-0d2c-4217-b713-9082b7a618a3.png?v=1794931356","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t100s-oem-rear-crossbar","provider":"Ares Acres","version":"1.0","type":"link"}