{"product_id":"dji-agras-t30-oem-cable-cover-plate","title":"DJI Agras T30 OEM Cable Cover Plate","description":"\u003cp\u003eThe DJI Agras T30 OEM Cable Cover Plate is the black moulded plate that covers cable routing on the airframe of the DJI Agras T30. As shown in the product images, it is a long, flat plate with a ribbed face, narrow along most of its length and widening at one end into two forked tabs with a U-shaped gap between them. It carries many screw points, a number of them fitted with metal inserts, a raised square boss near the middle with its own screw points, and a small clip slot along one edge. It belongs to the airframe, it is identified for the DJI Agras T30, and it is supplied brand new as one plate. Its job is to close over cables and hold them in their routing, so they are kept clear of moving parts, spray and debris. Operators usually reach it while searching for a T30 cable cover, a T30 cable cover plate, a T30 wiring cover or a cracked T30 cable cover after a hard landing. DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🇺🇸 U.S.A. FIRST\u003c\/h2\u003e\n\u003cp\u003eAres Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFREE \u0026amp; FAST Shipping is included for all U.S. customers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.\u003c\/p\u003e\n\u003cp\u003eAres Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e✅ DJI Agras T30 Compatibility Guarantee\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 USA Compatibility Guarantee\u003c\/li\u003e\n\u003cli\u003e👍🏻 Satisfaction Guarantee\u003c\/li\u003e\n\u003cli\u003e💵 Money Back Guarantee\u003c\/li\u003e\n\u003cli\u003e📦 Same Day Shipping \u0026amp; Tracking\u003c\/li\u003e\n\u003cli\u003eIdentified for the DJI Agras T30, cable cover plate position on the airframe\u003c\/li\u003e\n\u003cli\u003eMatched by the plate outline, the forked tabs at the wide end, the screw-point pattern and the raised square boss against the plate you removed\u003c\/li\u003e\n\u003cli\u003eGenuine DJI OEM airframe component, brand new, supplied as one plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe variant is one cable cover plate. It is not a cable, not a shell panel and not a frame member. If you want the match confirmed, photograph the plate you removed flat on a table, so the forked tabs and all the screw points show, and send it to us. We will match it for you, so the right part arrives first time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📦 Package Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DJI Agras T30 OEM Cable Cover Plate, black, moulded, with two forked tabs at its wide end, screw points with metal inserts and a raised square boss, as shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne plate per order line.\u003c\/strong\u003e The variant is a single plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is part of the plate:\u003c\/strong\u003e the moulded body, the forked tabs, the raised square boss and the metal inserts set into the screw points, all as one part.\u003c\/p\u003e\n\u003cp\u003eNot included: the screws, the cables it covers, cable ties, any cable clips, shell panels and tools. Each of these is a separate part.\u003c\/p\u003e\n\u003cp\u003eNothing is included because it appears near the plate on the aircraft. If a screw or clip from the old plate is missing, tell us where it sat and we will help you identify it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔧 Component Overview\u003c\/h2\u003e\n\u003cp\u003eA spray aircraft carries a lot of wiring between its power, its arms, its pump and its sensors, and that wiring has to be held in a fixed route so it cannot rub, snag or sit in spray. The cable cover plate is one of the parts that does that on the T30: a flat moulding that closes over a run of cable and is screwed down along its length.\u003c\/p\u003e\n\u003cp\u003eAs shown in the product images, five features identify it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe outline\u003c\/strong\u003e — a long, flat plate, narrow along most of its length and wide at one end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe forked tabs\u003c\/strong\u003e — two tabs at the wide end, with a U-shaped gap between them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe screw points\u003c\/strong\u003e — many of them along both edges and across the plate, a number fitted with metal inserts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe raised square boss\u003c\/strong\u003e — a square raised area near the middle with its own screw points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe ribbed face\u003c\/strong\u003e — stiffening ribs running along and across the plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe metal inserts matter. A screw driven into plain plastic cuts its own thread and loses grip each time it is undone. A metal insert gives each screw a durable thread to bite on. The plate depends on those inserts staying put: an insert that spins in its hole, or pulls out of it, leaves that screw point with no grip at all.\u003c\/p\u003e\n\u003cp\u003eA plate like this fails in a small number of ways. An insert spins or pulls out when a screw is over-tightened or cross-threaded. A forked tab snaps in a hard landing or when the plate is levered off. The plate cracks across a rib from an impact. A scuffed or scratched face is not a failure.\u003c\/p\u003e\n\u003cp\u003eExactly which cable run on the T30 airframe the plate covers is not published for this part. The match is made by the plate's own outline and fixings.\u003c\/p\u003e\n\u003cp\u003eThe plate carries no wiring of its own and has no setting. It covers and holds; that is all it does.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚙️ Functional Purpose\u003c\/h2\u003e\n\u003cp\u003eThe plate's engineering role is cover and retention. It closes over a cable run and, screwed down along its length, holds the cables in their route.\u003c\/p\u003e\n\u003cp\u003eOn the airframe it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCovers a run of cable\u003c\/li\u003e\n\u003cli\u003eKeeps the cables in their route, clear of moving parts\u003c\/li\u003e\n\u003cli\u003eShields the cables from spray, residue and debris\u003c\/li\u003e\n\u003cli\u003eIs screwed down through its many screw points, several with metal inserts\u003c\/li\u003e\n\u003cli\u003eCan be replaced on its own once its screws are released\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat it does not do matters as much:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not carry power or signal; it carries no wiring\u003c\/li\u003e\n\u003cli\u003eIt does not hold the airframe together; the frame does that\u003c\/li\u003e\n\u003cli\u003eIt does not repair a damaged cable underneath it\u003c\/li\u003e\n\u003cli\u003eIt is not a shell panel for the outside of the aircraft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe plate is the reason a cable stays where it was routed. A plate with a missing screw point or a snapped tab leaves part of the run free to lift, and a cable that can move is a cable that can rub through.\u003c\/p\u003e\n\u003cp\u003eMaterial, dimensions, weight and the number of screw points are not published for this part.\u003c\/p\u003e\n\u003cp\u003eInsert thread size is not published for this part.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 Diagnosis — the plate is bought for its fixings and tabs, not for the cable beneath it\u003c\/h2\u003e\n\u003cp\u003eA cable fault under a cover plate gets the plate taken off, and once it is off, any mark on it gets the blame. That is the wrong way round. The plate carries no signal and no power. A cable that has rubbed through, a plug that has worked loose or a connector full of residue is the fault, and a new plate will not change it.\u003c\/p\u003e\n\u003cp\u003eThe way to decide is to judge the plate by its own job. Can every screw point take its screw and hold? Are both forked tabs whole? Does the plate lie flat? If all three are true, the plate is sound, whatever its face looks like.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymptoms that point at the plate:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA metal insert that spins when its screw is turned\u003c\/li\u003e\n\u003cli\u003eA metal insert pulled out of its hole, or missing\u003c\/li\u003e\n\u003cli\u003eA forked tab cracked or snapped off\u003c\/li\u003e\n\u003cli\u003eA crack across a rib or through a screw point\u003c\/li\u003e\n\u003cli\u003eA plate that will not lie flat with all its screws in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat proves it:\u003c\/strong\u003e with the aircraft powered off and the battery removed, take each screw out and put it back in turn. A screw that turns without tightening has a spun insert. Look into each screw point for an insert that is loose, tilted or gone. Check both forked tabs at their roots. Lay the plate on a flat surface and look for a gap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck these first, because they produce similar symptoms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe cables beneath the plate, for chafe, cuts or a loose plug\u003c\/li\u003e\n\u003cli\u003eThe screws, for a stripped head or a damaged thread that only looks like a spun insert\u003c\/li\u003e\n\u003cli\u003eThe frame points the plate screws into, for a crack\u003c\/li\u003e\n\u003cli\u003eThe routing of the cables, for one that has been trapped under the plate edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not explain:\u003c\/strong\u003e a power or signal fault, a sensor warning, a motor or pump that will not run, or a crack in the frame itself. Those sit in the cables, the connectors, the components they serve, or the frame.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Common Replacement Indicators\u003c\/h2\u003e\n\u003cp\u003eReplace the plate when inspection confirms one of these:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA metal insert that spins or has pulled out\u003c\/li\u003e\n\u003cli\u003eA snapped or cracked forked tab\u003c\/li\u003e\n\u003cli\u003eA crack across a rib or through a screw point\u003c\/li\u003e\n\u003cli\u003eA plate that will not lie flat with all its screws in\u003c\/li\u003e\n\u003cli\u003eA raised square boss cracked or broken away\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspect these first, because they produce similar symptoms:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe screws themselves\u003c\/li\u003e\n\u003cli\u003eThe cables beneath the plate\u003c\/li\u003e\n\u003cli\u003eThe frame points the plate screws into\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA plate held by all but one screw still looks fitted. It is not proved sound because it is still in place; the free end is where a cable can lift and start to rub.\u003c\/p\u003e\n\u003cp\u003eThere is no published service interval for the plate. It is replaced when an insert or tab has failed or the plate is cracked, not on a schedule and not for scuffs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e📐 Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e DJI Agras T30 OEM Cable Cover Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — cable routing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent type:\u003c\/strong\u003e Cable cover plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Long, flat ribbed moulding, wide at one end with two forked tabs, raised square boss near the middle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixing points:\u003c\/strong\u003e Many screw points, several fitted with metal inserts; exact count not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsert thread size:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e None\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting position:\u003c\/strong\u003e Over a cable run on the T30 airframe; exact run not published for this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation method:\u003c\/strong\u003e Screwed down through its screw points\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware included:\u003c\/strong\u003e None — screws, clips and cable ties are not supplied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService adjustability:\u003c\/strong\u003e None — the plate is correct or it is not, with no adjustment or app setting that compensates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e DJI OEM airframe component\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e🛠️ Installation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBefore installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower the aircraft off and remove the battery\u003c\/li\u003e\n\u003cli\u003eClean the area around the plate so grit does not fall onto the cables\u003c\/li\u003e\n\u003cli\u003ePhotograph the plate in place, so its orientation and the cable routing are on record\u003c\/li\u003e\n\u003cli\u003eLay the new plate beside the old one and compare the outline, the forked tabs, the boss and the screw points\u003c\/li\u003e\n\u003cli\u003eLay out a tray for the screws, keeping them in the order they come out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuring installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelease the screws evenly and lift the plate straight off; do not lever it by a forked tab\u003c\/li\u003e\n\u003cli\u003eInspect the cables beneath for chafe, cuts or a loose plug while they are exposed\u003c\/li\u003e\n\u003cli\u003eCheck that every cable sits in its route and none will be trapped under the plate edge\u003c\/li\u003e\n\u003cli\u003eSet the new plate the same way round as the old one\u003c\/li\u003e\n\u003cli\u003eStart every screw by hand so it runs into its insert squarely\u003c\/li\u003e\n\u003cli\u003eSnug the screws evenly; DJI does not publish a torque figure, and over-tightening is what spins an insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAfter installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the plate lies flat along its whole length\u003c\/li\u003e\n\u003cli\u003eCheck that every screw has tightened and none turns freely\u003c\/li\u003e\n\u003cli\u003eCheck that no cable is pinched at the plate edge\u003c\/li\u003e\n\u003cli\u003ePower the aircraft on and confirm there are no new warnings\u003c\/li\u003e\n\u003cli\u003eRecord the replacement in the maintenance log\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance between jobs.\u003c\/strong\u003e When the aircraft is cleaned, check that every screw in the plate is present and snug, and that both forked tabs are whole. A screw that turns without tightening is a spun insert, and the time to deal with it is before the cable beneath starts to move.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🚜 Necessary For\u003c\/h2\u003e\n\u003cp\u003eThis plate is for operators and technicians whose T30 cable cover plate has a failed insert, a broken tab or a crack:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Agras T30 operators whose cable cover plate will no longer hold all its screws\u003c\/li\u003e\n\u003cli\u003eCommercial spray applicators repairing a T30 after a hard landing\u003c\/li\u003e\n\u003cli\u003eAgras service centres rebuilding T30 airframes\u003c\/li\u003e\n\u003cli\u003eFleet managers stocking small airframe parts for T30 aircraft\u003c\/li\u003e\n\u003cli\u003eTechnicians who found a snapped tab or a pulled insert while servicing the wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not the part you need if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe fault is in a cable beneath the plate — the plate carries no wiring, and the cable is the repair\u003c\/li\u003e\n\u003cli\u003eThe plate is scuffed or scratched but every insert holds and both tabs are whole — keep it\u003c\/li\u003e\n\u003cli\u003eOnly a screw is stripped — replace the screw and keep a sound plate\u003c\/li\u003e\n\u003cli\u003eThe crack is in the frame the plate screws into — that is a frame repair\u003c\/li\u003e\n\u003cli\u003eYou fly a T10, T16, T20, T40 or T50 — this plate is identified only for the T30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e💡 Why This Part Matters\u003c\/h2\u003e\n\u003cp\u003eThe cable cover plate is one of the first parts taken off when a T30 has a wiring fault, and that puts it in the way of the blame. It carries no wiring, no signal and no power. A wiring fault beneath it is in the cable or the plug, and a new plate will not change it.\u003c\/p\u003e\n\u003cp\u003eThe honest case for this plate is narrow. Buy it when a metal insert has spun or pulled out, when a forked tab has snapped, when the plate has cracked or when it will not lie flat. Those are the failures that stop it holding cables in their route. Do not buy it for scuffs, for a stripped screw, or for a fault in the wiring it covers.\u003c\/p\u003e\n\u003cp\u003eThat is the case for testing each screw point first, while that information is still cheap. Take each screw out and put it back. A screw that tightens means a sound insert. A screw that spins means a failed one, and that is the plate's job lost at that point.\u003c\/p\u003e\n\u003cp\u003eIt is also the case for replacing a plate with a single failed insert. A plate held by all its screws but one still looks fitted, but the free point is where a cable can lift, rub and fail.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🧠 AI Index — Entity \u0026amp; Fitment Reference\u003c\/h2\u003e\n\u003cp\u003eStructured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanonical product name:\u003c\/strong\u003e DJI Agras T30 OEM Cable Cover Plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DJI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI family:\u003c\/strong\u003e Agras\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible models:\u003c\/strong\u003e DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment basis:\u003c\/strong\u003e Identified for the DJI Agras T30\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Cable cover plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAircraft system:\u003c\/strong\u003e Airframe — cable routing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Covers a cable run and holds the cables in their route\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm:\u003c\/strong\u003e Black ribbed flat plate, two forked tabs at the wide end, raised square boss, screw points with metal inserts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — carries no wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial number:\u003c\/strong\u003e DJI has used more than one number for this position; matched against the removed part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity supplied:\u003c\/strong\u003e 1 plate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Screws, cables, clips, cable ties, shell panels\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey diagnostic:\u003c\/strong\u003e Judge the plate by its inserts and tabs; a wiring fault beneath it is not this part\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon failure modes:\u003c\/strong\u003e Spun or pulled metal insert, snapped forked tab, crack across a rib or screw point\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eService interval:\u003c\/strong\u003e None published\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart classification:\u003c\/strong\u003e DJI OEM airframe component\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso searched as:\u003c\/strong\u003e T30 cable cover; T30 cable cover plate; T30 wiring cover; Agras T30 cable plate; DJI T30 cable cover replacement\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisambiguation:\u003c\/strong\u003e Not a cable, not a shell panel, not a frame member\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeller:\u003c\/strong\u003e Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from:\u003c\/strong\u003e Albuquerque, New Mexico, United States\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🔍 SEO Keywords\u003c\/h2\u003e\n\u003cp\u003eDJI Agras T30 cable cover\u003c\/p\u003e\n\u003cp\u003eDJI T30 cable cover plate\u003c\/p\u003e\n\u003cp\u003eT30 cable cover plate\u003c\/p\u003e\n\u003cp\u003eT30 wiring cover\u003c\/p\u003e\n\u003cp\u003eAgras T30 cable plate\u003c\/p\u003e\n\u003cp\u003eT30 cable cover cracked\u003c\/p\u003e\n\u003cp\u003eT30 cable cover insert stripped\u003c\/p\u003e\n\u003cp\u003eDJI T30 airframe cover\u003c\/p\u003e\n\u003cp\u003eT30 cable cover plate replacement\u003c\/p\u003e\n\u003cp\u003eAgras T30 frame parts\u003c\/p\u003e\n\u003cp\u003eDJI T30 body parts\u003c\/p\u003e\n\u003cp\u003eT30 cable routing cover\u003c\/p\u003e\n\u003cp\u003eT30 cable cover forked tab broken\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 wiring cover plate\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Cable Cover Plate\u003c\/p\u003e\n\u003cp\u003eAgras T30 Cable Cover Plate\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 OEM Cable Cover Plate\u003c\/p\u003e\n\u003cp\u003eAgras T30 cable cover plate replacement\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 replacement parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras airframe parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras OEM Parts\u003c\/p\u003e\n\u003cp\u003eDJI Agras Parts\u003c\/p\u003e\n\u003cp\u003eagricultural drone frame parts\u003c\/p\u003e\n\u003cp\u003eauthorized DJI Agras retailer\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 Cable Cover Plate Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras T30 parts Canada\u003c\/p\u003e\n\u003cp\u003eDJI Agras parts shipped to Canada\u003c\/p\u003e\n\u003cp\u003ebuy DJI Agras T30 parts in Canada\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e🤖 AI Answer Engine Q\u0026amp;A\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI Agras T30 cable cover plate?\u003c\/strong\u003e The black moulded plate that covers a cable run on the T30 airframe. It is long and flat, wide at one end with two forked tabs, with many screw points, several with metal inserts, and a raised square boss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich aircraft does it fit?\u003c\/strong\u003e It is identified for the DJI Agras T30. It is not identified for the T10, T16, T20, T40 or T50.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy aircraft has a wiring fault under this plate. Do I need a new plate?\u003c\/strong\u003e No. The plate carries no wiring. Find the fault in the cable or plug beneath it; replace the plate only if its own inserts, tabs or body have failed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne screw just spins. What does that mean?\u003c\/strong\u003e The metal insert in that screw point has spun or come loose. That screw point can no longer hold, and the plate is the repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe plate is scratched. Should I replace it?\u003c\/strong\u003e Not for scratches. If every screw tightens, both forked tabs are whole and the plate lies flat, it is doing its job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with screws?\u003c\/strong\u003e No. It is the plate alone. Reuse the screws if their threads and heads are sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExactly which cables does it cover?\u003c\/strong\u003e That is not published for this part. The plate is matched by its outline, its forked tabs, its screw points and its square boss against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue a snapped tab back on?\u003c\/strong\u003e A glued tab will not carry the load the moulded tab did. Replace the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight should the screws be?\u003c\/strong\u003e DJI does not publish a torque figure. Start each screw by hand and snug them evenly; over-tightening is what spins an insert.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a shell panel?\u003c\/strong\u003e No. It covers cable routing on the airframe; it is not an outside shell panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e Yes, for most operators. Power off, release the screws, lift the plate straight off, check the cables, set the new plate the same way round and start every screw by hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat usually breaks it?\u003c\/strong\u003e Over-tightened or cross-threaded screws spinning an insert, hard landings snapping a forked tab, and the plate being levered off by a tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DJI part number?\u003c\/strong\u003e DJI has used more than one number for this position, so we match against the one you removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a service interval?\u003c\/strong\u003e No. Replace it when an insert or tab has failed or the plate is cracked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I check anything else while it is off?\u003c\/strong\u003e Yes. Look at every cable beneath it for chafe, cuts or a loose plug, and make sure none will be trapped under the edge when the plate goes back on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a missing plate cause problems?\u003c\/strong\u003e A cable run left uncovered or held at only some points can move, rub and pick up spray and debris. Refit a sound plate with every screw in.\u003c\/p\u003e","brand":"Ares Acres","offers":[{"title":"DJI T30","offer_id":68086844686656,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/0159\/0848\/files\/dji-agras-t30-oem-cable-cover-plate-1.png?v=1794387271","url":"https:\/\/aresacres.com\/pt\/products\/dji-agras-t30-oem-cable-cover-plate","provider":"Ares Acres","version":"1.0","type":"link"}